Custom fields not getting updated in Mass Maintenance-MM17

Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
    segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
    sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
Geeta

I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

Similar Messages

PO Custom Field not getting filled from Shopping Cart

Hi Gurus,
I am new to SRM. The requirement I had was to add a new field to the SC. I read several posts and articles on this but couldn't find the solution to it. I managed to do this modifying the corresponding structures in SRM and making the necessary changes in R/3 so the new filed can be seen in ME21/22/23N.
I checked Andreas Milbredt document to achieve it as mentioned:
Document: How to transfer custom fields from SRM to Backend.
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27
After that, when I create a Shopping Cart, the value in the New field is not transferred to the Back end.
I coded the following BADIs and User Exits:
In SRM:
BBP_CUF_BADI_2 (MODIFY_SCREEN) ->To enable or disable the field depending on conditions. Works fine.
BBP_DOC_CHECK_BADI (BBP_DOC_CHECK) -> To do some checks. Works Fine
BBP_CREATE_BE_PO_NEW (FILL_PO_INTERFACE1) ->Here I fill structures BAPI_TE_MEPOITEM and BAPI_TE_MEPOITEMX. I added another u2018Xu2019 to indicate the new field to BAPI_TE_MEPOITEMX. But I think I am not doing it right. This structure BAPI_TE_MEPOITEM/X, does the order of the fields correspond to the order of the fields in any of these 3 structures (which I am using)?
INCL_EEW_PD_HISTORY_CSF
INCL_EEW_PD_ITEM_CSF
INCL_EEW_PD_ITEM_CSF_SC
I also checked the following link:
Map a custom SRM field to a standard field in R/3
In R/3 I populated the Exits Andreau2019s mentions on his article. Am I missing anything else?
Thanks & Regards,
Ernesto.

Hi Ernesto,
You can find out how your BAPI structure is being populated (by generating the test data ) using FBGENDAT program and activating the BAPI_PO_CREATE1 (and you will need to set the parameter for the specified user id)... This will provide you ability to execute the BAPI offline and figure out what is happening...
Note 517767 - Generate test data for function modules
Things to look for, Is any of your custom fields quantity fields or integer?
Check out the following OSS note
Note 509898 - BAPI enhancement concept and Unicode
Also check out the following SDN Thread,
problem using BAPI_BUS2001_CREATE to create project definition
Check out a similar thread that we are discussing (for PR)
Custom Fileds Data Was Not Getting Updated In BAPI_PR_CREATE

Field not getting updated in BDC while running in background

Hi Friends,
I'm executing a BDC transaction to update the Alternate Tax Classification (VBAK_TAXK1) field in Sales Order. I'm passing value 1 to the field and then saving it directly. While running the BDC in background, the field is not getting updated. On the other hand i checked it running in foreground, the field got updated without any error message.
Can anybody help me advicing why the field is not getting updated in background?
Thanks,
Bestin

Hi ,
Check the the log if you are using a session method and if call transaction then capture the messages for the same,
Because in the foreground the BDC will update the records even if there is a warning message nut in background it will not update. So check the data which you are inserting and try avoid the warning messages also so that it can run smoothly in backfround.
Thanks & Regards
Jyo

Quantity field not getting update in PCA document for Goods Receipt

We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.Mohanty

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

REGUP Table Withholding tax field not getting updated

hi friends,
from a specifc date with holdiing tax is not getting updated in REGUP-QBSHH field, so in payment advice its not getting displayed. can any one help me wat could be the problem for this
thanks
nagaraj

hi amir,
i dont have test case for that. till 28th of the last month the field has been updated and after that till now all the entries in that field is showing zero. but when we check in FB03. i can see the with holding tax amount. can u tell me how this table is getting updated
thanks

Fields not getting updated in FBL3N and FBL5N

Hi
I have introduced new fields like material number, quantity sales document number, etc in through FBL3N --> Settings --> List special fields.
Also i added one more field in 'sort key' as sales document number. I updated sort key in customer master and GL master (i.e. reconcliation account of customer A/c)
But inspite of doing this, i can see those fields after change layout. But these fields are still empty. I do not know why its empty.
When i changed sort key to sales document number, sales delivery number is coming instead of sales document number in assignment field.
Please help

Dear Meenakshi,
Even though there are various fields available in FBL5N or FBL3N, all the fields are not updated for all the transactions. Based on transaction to transaction, fields get updated and mostly these are SAP standards. If you want certain fields, you need to develop Z reports accordingly.
For example when GR is posted, system does not update PO number in Purchase order field. But alternatively it is updated in REFKEY1 field. Similarly when billing is done, it does not update material code in FI tables so it does not appear in FBL5N.
Regarding Sort key, check with your SD consultant, what copy control it is used. In finance, assignment field is updated based on copy control used in SD.
Regards,
Niraj

Customer Fields not getting poplulated in PO in R/3 (ECC 6.0) from SRM 5.0

Hi,
    We Recently upgraded our R/3 System from 4.6 C to ECC 6.0.
Shopping card number is getting created in SRM side and after approval it is getting sent to R/3 Back end,We have some customer fields that need to be populated in the back end from the shopping card,Which is not happening as of now.We are using the BAPI_PO_CREATE1 for creating the PO in R/3.We tried running the BAPI_PO_CREATE1 Standalone by giving the customer fields Table EXTENSIONIN and in Structure BAPI_TE_PO_ITEMS,But the custom fields are not populating in the PO.
Pls suggest,
Thanks
Rakesh.

Hi Rakesh ,
1.wat is ur target table that ur custom fields were added using apped structure.
2. Have u passed the Communcation strucure also means
in ur case BAPI_TE_MEPOITEMX along with BAPI_TE_MEPOITEM .
Plz find similar code which is for sale order coding which may help u .
***Constant Declarations
Constant: C_BAPE_VBAP (9) type u2018BAPE_VBAPu2019,
          C_BAPE_VBAPX (10) type u2018BAPE_VBAPXu2019
TYPES:    BEGIN OF T_BAPE_VBAP,
           VBELN TYPE VBELN_VA,
           POSNR TYPE POSNR_VA,
           ZZcontract_num type ZZcontract_num "Custom field
          END OF T_BAPE_VBAP.
***Communication Fields
TYPES: BEGIN OF T_BAPE_VBAPX,
        VBELN TYPE VBELN_VA,
        POSNR TYPE POSNR_VA,
        ZZcontract_numX type CHAR1,
       END OF T_BAPE_VBAPX.
Declaring the Internal table and Work areas
DATA: I_EXTENSIONIN TYPE STANDARD TABLE OF BAPIPAREX. u201CInternal table                             for BAPI Extension Table
      w_EXTENSIONIN like line of I_EXTENSIONIN,             u201CWork area for BapiExtension Table
     I_return type standard table of bapiret2,
   W_return like line of i_return,
      is_BAPE_VBAP    type    T_BAPE_VBAP,              u201CStructure declaration
      is_BAPE_VBAPX type T_BAPE_VBAPX,            u201CStructure declaration
      v_vbeln type   BAPE_VBAP-VBELN,            u201CVariable for the doc no
      v_posnr type BAPE_VBAP-POSNR,                  u201CVariable for the itemnumber
v_zzcontract_num type BAPE_VBAP-ZZcontract_num, u201CVariable for the Contract number
Filling the BAPI table Extension Structure.
           W_BAPE_VBAP-VBELN =u201D00001234u2019.
           W_BAPE_VBAP-POSNR =u2019000010u2019 .
           W_BAPE_VBAP-ZZcontract = 'ABC123'.
W_EXTENSIONIN-STRUCTURE = C_BAPE_VBAP.
w_EXTENSIONIN+30 =W_BAPE_VBAP.
APPEND W_EXTENSIONIN TO I_EXTENSIONIN.
CLEAR w_EXTENSIONIN..
           k_BAPE_VBAP-VBELN =u201D00001234u2019.
           W_BAPE_VBAP-POSNR =u2019000010u2019 .
W_BAPE_VBAP-ZZcontractx = 'X'.
*********same to pass Communication Structure.
W_EXTENSIONIN-STRUCTURE = C_BAPE_VBAPX.
w_EXTENSIONIN+30 = W_BAPE_VBAPX.
APPEND W_EXTENSIONIN TO I_EXTENSIONIN.
CLEAR w_EXTENSIONIN.
6) Then Call BAPI u2018BAPI_SALESORDER_CHANGE u2018to Update Sale Order with Contract number
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      SALESDOCUMENT    = V_SALORD_NUMBER
      ORDER_HEADER_IN = K_ORDER_HEADER_IN
      ORDER_HEADER_INX = K_ORDER_HEADER_INX
    TABLES
      RETURN           = I_RETURN
      ORDER_ITEM_IN    = I_ORDER_ITEM_IN
      ORDER_ITEM_INX   = I_ORDER_ITEM_INX
      EXTENSIONIN      = I_EXTENSIONIN.
****COMMIT WORK AND WAIT.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT = 'X'.
Hope it may help you
Rgds
Sree

Custom field not getting added into MSEG table throuhBADI MB_MIGO_BADI

i have created a new tab in MIGO transaction and created a zfield called ZZcert . i have also created one append structure in MSEG table with field name ZZCERT .
i have created new tab for migo using BADI MB_MIGO_BADI . when i enter value in ZZCERT in MIGO transaction , it is not updated in MSEG table . but in debugging mode im able to see the value in (SAPLMIGO)MSEG . i have tried the option of using Field symbols also . but it didnt work .
I have searched in the forum for suitable answers.
can anybody guide me how to update the ZZCERT value into MSEG table ??
thanks in advance
pavan

Hi,
if i am not wrong these are standard transactions..when you have created a screen then for your field you can click on "get from dictionary" and the map your field(drag a field from MSEG directly on to the custom field on screen) and the you have to activate the screen....i think thats the only thing you need to do so as to update the field value in database...
or else as sugegsted by the post above you need to use BDC recording to update the databse table MSEG.
Abhijeet.

Custom field not getting populated in the "Show Results where" drop down

Hi all,
In appointment detail page by clicking on Add button on the user related information section , it takes us to a search layout showing the list of available users.
Here we have to filter the user's based on a custom field which has already been created in the user object. But I am not able to add the custom field in the "Show results where" drop down for which the search has to be done.
It is getting reflected in the normal search layouts.So Can any one tell me why the change is not getting reflected in the user related info search layout?

I tested your use case and you are correct. I would recommend that you submit a service request to CRM On Demand customer care in reference to this issue.

BAPI_MATERIAL_SAVEDATA-Tax fields not getting updated.

Hi Everyone,
    I'm trying to create material through this BAPI -"BAPI_MATERIAL_SAVEDATA"
I'm also passing the tax information related to it in the TAXCLASSIFICATIONS table.I'm populating the fields in the format as I have shown below in the code.Everything is working fine ,material is getting created except the tax information in the material not being affected against what I'm passing.I'm not sure though what does the tax_ind field does in the TAXCLASSIFICATIONS table.
Specifically,The country CA has different type codes mentioned as CATX1,CATX2,CATX3.But the values are getting updated only for the CATX1 category code.So after the creation, All the countries have their taxes classified except and CATX2 and CATX3 remain blank-no entry at all.
Kindly let me know if you have a clue regarding this.
FUNCTION Z_CREATE_MATERIAL.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(MATERIAL) TYPE MARA-MATNR OPTIONAL
*"     VALUE(MATDESC) TYPE MAKT-MAKTX OPTIONAL
*"     VALUE(KBETR) TYPE BDCDATA-FVAL OPTIONAL
*"     VALUE(MATCOST) TYPE STPRS_BAPI OPTIONAL
*" EXPORTING
*"     VALUE(MESSAGE) TYPE STRING
DATA: BAPI_HEAD   LIKE BAPIMATHEAD,
        BAPI_MAKT   LIKE BAPI_MAKT,    "Material Description
        BAPI_MARA1 LIKE BAPI_MARA,    "Client Data
        BAPI_MARAX LIKE BAPI_MARAX,
        BAPI_MARC1 LIKE BAPI_MARC,    "Plant View
        BAPI_MARCX LIKE BAPI_MARCX,
        BAPI_MBEW1 LIKE BAPI_MBEW,    "Accounting View
        BAPI_MBEWX LIKE BAPI_MBEWX,
        BAPI_RETURN LIKE BAPIRET2,
        bapi_sales like BAPI_MVKE,
        bapi_salesx like BAPI_MVKEX,
        bapi_mard like BAPI_mard,
        bapi_mardx like BAPI_mardx.
DATA: BEGIN OF INT_MAKT OCCURS 100.
          INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF INT_MAKT.
DATA: BEGIN OF L_T_MARM OCCURS 100.
          INCLUDE STRUCTURE   BAPI_MARM.
DATA: END OF L_T_MARM.
DATA: BEGIN OF L_T_MARMx OCCURS 100.
          INCLUDE STRUCTURE   BAPI_MARMx.
DATA: END OF L_T_MARMx.
DATA: BEGIN OF L_T_tax OCCURS 100.
          INCLUDE STRUCTURE   BAPI_MLAN.
DATA: END OF L_T_tax.
*for plant 3800
* Header
BAPI_HEAD-MATERIAL        = MATERIAL.
BAPI_HEAD-IND_SECTOR      = '1'.
BAPI_HEAD-MATL_TYPE       = 'HAWA'.
BAPI_HEAD-BASIC_VIEW      = 'X'.
bapi_head-SALES_VIEW = 'X'.
bapi_head-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW    = 'X'.
bapi_head-cost_view = 'X'.
bapi_head-mrp_view = 'X'.
* Client Data - Basic
BAPI_MARA1-BASE_UOM       = 'EA'.
BAPI_MARA1-UNIT_OF_WT     = 'LB'.
BAPI_MARA1-ALLWD_VOL = '10'.
BAPI_MARA1-PACK_VO_UN = 'CCM'.
bapi_marax-ALLWD_VOL = 'X'.
bapi_marax-PACK_VO_UN = 'X'.
BAPI_MARA1-DIVISION       = '00'.
BAPI_MARA1-NET_WEIGHT     = '1'.
BAPI_MARA1-MATL_GROUP = '002'.
BAPI_MARa1-TRANS_GRP = '0001'.
bapi_mara1-prod_hier = '001700010000000110'.
BAPI_MARAX-trans_grp    = 'X'.
bapi_marax-prod_hier = 'X'.
BAPI_MARAX-BASE_UOM   = 'X'.
BAPI_MARAX-UNIT_OF_WT   = 'X'.
BAPI_MARAX-DIVISION    = 'X'.
BAPI_MARAX-MATL_GROUP    = 'X'.
BAPI_MARAX-NET_WEIGHT    = 'X'.
bapi_mara1-ITEM_CAT = 'NORM'.
BAPI_MARAX-item_cat    = 'X'.
*Units of measure - Gross weight populate
L_T_MARM-ALT_UNIT = 'EA'.
L_T_MARM-ALT_UNIT_ISO = 'EA'.
L_T_MARM-GROSS_WT = '1'.
L_T_MARM-UNIT_OF_WT = 'LB'.
L_T_MARM-VOLUME = '100'.
L_T_MARM-VOLUMEUNIT = 'CCM'.
L_T_MARMX-VOLUME = 'X'.
L_T_MARMX-VOLUMEUNIT = 'X'.
APPEND L_T_MARM.
L_T_MARMX-UNIT_OF_WT = 'X'.
L_T_MARMX-GROSS_WT = 'X'.
L_T_MARMX-ALT_UNIT = 'EA'.
L_T_MARMX-ALT_UNIT_ISO = 'EA'.
APPEND L_T_MARMX.
*Tax Classification
L_T_tax-DEPCOUNTRY = 'US'.
L_T_tax-DEPCOUNTRY_ISO = 'US'.
L_T_tax-TAX_TYPE_1 = 'UTXJ'.
L_T_tax-TAXCLASS_1 = '1'.
   append l_t_tax.
L_T_tax-DEPCOUNTRY = 'DE'.
L_T_tax-DEPCOUNTRY_ISO = 'DE'.
L_T_tax-TAX_TYPE_1 = 'MWST'.
L_T_tax-TAXCLASS_1 = '1'.
append l_t_tax.
L_T_tax-DEPCOUNTRY = 'CA'.
L_T_tax-DEPCOUNTRY_ISO = 'CA'.
L_T_tax-TAX_TYPE_1 = 'CTX1'.
L_T_tax-TAXCLASS_1 = '0'.
append l_t_tax.
L_T_tax-DEPCOUNTRY = 'CA'.
L_T_tax-DEPCOUNTRY_ISO = 'CA'.
L_T_tax-TAX_TYPE_1 = 'CTX2'.
L_T_tax-TAXCLASS_1 = '0'.
   append l_t_tax.
L_T_tax-DEPCOUNTRY = 'CA'.
L_T_tax-DEPCOUNTRY_ISO = 'CA'.
L_T_tax-TAX_TYPE_1 = 'CTX3'.
L_T_tax-TAXCLASS_1 = '0'.
    append l_t_tax.
L_T_tax-DEPCOUNTRY = 'AU'.
L_T_tax-DEPCOUNTRY_ISO = 'AU'.
L_T_tax-TAX_TYPE_1 = 'ATX1'.
L_T_tax-TAXCLASS_1 = '0'.
   append l_t_tax.
L_T_tax-DEPCOUNTRY = 'NZ'.
L_T_tax-DEPCOUNTRY_ISO = 'NZ'.
L_T_tax-TAX_TYPE_1 = 'NZTX'.
L_T_tax-TAXCLASS_1 = '0'.
   append l_t_tax.
* Material Description
REFRESH INT_MAKT.
INT_MAKT-LANGU           = 'EN'.
INT_MAKT-MATL_DESC       = MATDESC.
APPEND INT_MAKT.
* Plant - Purchasing
BAPI_MARC1-PLANT      = '3800'.
BAPI_MARC1-PUR_GROUP = '100'.
BAPI_MARCX-PLANT      = '3800'.
BAPI_MARC1-ISS_ST_LOC = '0001'.
BAPI_MARC1-SLOC_EXPRC = '0001'.
BAPI_MARCx-PUR_GROUP      = 'X'.
BAPI_MARCX-ISS_ST_LOC = 'X'.
BAPI_MARCX-SLOC_EXPRC = 'X'.
BAPI_MARC1-LOADINGGRP = '0002'.
BAPI_MARCx-LOADINGGRP = 'X'.
BAPI_MARC1-PLND_DELRY = '1'.
BAPI_MARC1-MRP_TYPE = 'PD'.
BAPI_MARC1-MRP_CTRLER = '001'.
BAPI_MARC1-SM_KEY = '001'.
BAPI_MARC1-LOTSIZEKEY = 'TB'.
BAPI_MARC1-PROC_TYPE = 'F'.
BAPI_MARCx-PLND_DELRY      = 'X'.
BAPI_MARCx-MRP_TYPE      = 'X'.
BAPI_MARCx-MRP_CTRLER      = 'X'.
BAPI_MARCx-SM_KEY      = 'X'.
BAPI_MARCx-LOTSIZEKEY      = 'X'.
BAPI_MARCx-proc_type = 'X'.
BAPI_MARC1-MRP_GROUP = '0030'.
BAPI_MARCx-MRP_GROUP = 'X'.
*Sales View
bapi_sales-SALES_ORG = '3020'.
bapi_sales-DISTR_CHAN = '14'.
bapi_sales-DELYG_PLNT = '3800'.
BAPI_SALES-ITEM_CAT = 'NORM'.
bapi_salesx-ITEM_CAT = 'X'.
bapi_salesx-Delyg_plnt = 'X'.
bapi_salesx-sales_org = '3020'.
bapi_salesx-DISTR_CHAN = '14'.
bapi_sales-MATL_STATS = '1'.
bapi_salesx-MATL_STATS = 'X'.
* Accounting
BAPI_MBEW1-VAL_AREA   = '3800'.
BAPI_MBEW1-VAL_CLASS   = '3100'.
BAPI_MBEW1-STD_PRICE = matcost.
BAPI_MBEW1-PRICE_CTRL = 'V'.
bapi_mbew1-PRICE_UNIT = '1'.
BAPI_MBEWX-VAL_AREA   = '3800'.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWx-STD_PRICE = 'X'.
BAPI_MBEWX-VAL_CLASS   = 'X'.
bapi_mbewx-price_unit = 'X'.
bapi_mard-plant = '3800'.
bapi_mard-stge_loc = '0001'.
bapi_mardx-plant = '3800'.
bapi_mardx-stge_loc = '0001'.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
    EXPORTING
      HEADDATA                   = BAPI_HEAD
     CLIENTDATA                 = BAPI_MARA1
     CLIENTDATAX                = BAPI_MARAX
     PLANTDATA                  = BAPI_MARC1
     PLANTDATAX                 = BAPI_MARCX
*   FORECASTPARAMETERS         =
*   FORECASTPARAMETERSX        =
*   PLANNINGDATA               =
*   PLANNINGDATAX              =
   STORAGELOCATIONDATA        = bapi_mard
   STORAGELOCATIONDATAX       = bapi_mardx
     VALUATIONDATA              = BAPI_MBEW1
     VALUATIONDATAX             = BAPI_MBEWX
*   WAREHOUSENUMBERDATA        =
*   WAREHOUSENUMBERDATAX       =
     SALESDATA                  = bapi_sales
     SALESDATAX                 = bapi_salesx
*   STORAGETYPEDATA            =
*   STORAGETYPEDATAX           =
*   FLAG_ONLINE                = ' '
*   FLAG_CAD_CALL              = ' '
*   NO_DEQUEUE                 = ' '
*   NO_ROLLBACK_WORK           = ' '
   IMPORTING
     RETURN                     = BAPI_RETURN
   TABLES
     MATERIALDESCRIPTION        = INT_MAKT
   UNITSOFMEASURE             = L_T_MARM
   UNITSOFMEASUREX            = L_T_MARMX
*   INTERNATIONALARTNOS        =
*   MATERIALLONGTEXT           =
   TAXCLASSIFICATIONS         = l_t_tax
*   RETURNMESSAGES             =
*   PRTDATA                    =
*   PRTDATAX                   =
*   EXTENSIONIN                =
*   EXTENSIONINX               =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Any suggestions on this one would really mean a lott of help to me.
Thanks a lot,
Archies!!

Hi James ,
I' m not sure but could you please try like this
L_T_tax-DEPCOUNTRY = 'CA'.
L_T_tax-DEPCOUNTRY_ISO = 'CA'.
L_T_tax-TAX_TYPE_1 = 'CTX1'.
L_T_tax-TAXCLASS_1 = '0'.
   L_T_tax-TAX_TYPE_2 = 'CTX2'.
L_T_tax-TAXCLASS_2 = '0'.
append l_t_tax.
Hope this helps
Caglar

Addtional tab CI field not getting updated in table

Hi all,
I am using cProjects 4.0 system.
I had implemented addtional custom tab to display project custom include fields. In CI include of dpr_project table i added custom fields.
Then created new webdynpro component and in implemented interface tab in had implemented DPR_CUST_EXT_INTF. In view i displayed the 2 custom fields i added. In cProjects SPRO, i had given my component name for addtional tab. When I run the application it is showing those fields i added in addtional tab. While saving it is not updating custom field. Please let me know what needs to be done.
Thanks & Regards,
Karthick S

Hi,
For adding custom fields from CI_* includes, I advise you to use available feature in SAP standard 'field groups for customer fields' under : SPRO -> Collaboration Projects -> Global Enhancements to Project Elements.
This is the easiest way to add custom tabs & fields without webdynpro development. All standard functions are supported: field control, save, BADI...
BR
Matthias

Custom Field Not Getting Picked Up in BOR Event

We added a custom field, ZZMDMID, to the LFA1 table. We have Event Linkage set up to call a PI proxy whenever the LFA1.CREATED event is raised. Our event linkage shows that ZZMDMID exists and we have it mapped to the proxy interface.
Problem is that the new field, even though populated in LFA1 table, is never getting sent out to the proxy. Is there something else I need to configure?
Thanks,
Keith

requirements changed...not needed anymore

Fields not getting updated in the database through BAPI enhancement

Hi Experts,
I have added 4 custom fields in the transaction FB60. The fields are getting displayed in vendor line item.
I have to fill these fields from an inbound idoc which uses the BAPI_ACC_DOCUMENT_POST bapi. I have implemented the BADI BADI_ACC_DOCUMENT to pass my custom fields to the bapi and it is processing correctly by adding the custom field values to the extension table that is getting passed to the standard program of the BAPI from the BADI.
But I think, I have missed to append my fields in one of the standard structures. I have added the fields in BSEG, CI_COBL( which is getting called in BAPICOBL_CI, ACCIT).
Can anybody tell me which other standard structure I should add my custom fields so that it functions properly and gets added to the BSEG table.
Regards,
Sangeeta.

Solved on own.

Custom field not getting displayed in SUS PO item level

HI all,
We are using SRM 5.0, ECC6.0 and ECS scenario.
As per SAP note 762984, we have enhanced the structures such as :
INCL_EEW_PD_ITEM_CSF_SUSPO
INCL_EEW_PD_ITEM_CSF
and have added a record in the following place in SPRO:
Supplier Relationship management-> Supplier self service->Make field control settings for tables.
| Item | Display | Z.PO.ITM.VIEW
| Item | Change | Z.PO.ITM.EDIT
But we are unable to display the field in the SUS screen.
We had also referred to the following blog :
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
but had no success.
Please let us know if we did something wrong or are we missing something.
Also please let us know if BSP changes are really necessary to do this as neither in the SAP note nor in the above mentioned blog, there is any mention about this.
Regards
Kishan

Hi Bharadwaj,
Thank you for your inputs. I executed the program but it didn't display the field.
But I was able to rectify it by re-creating the steps mentioned in the blog (see original post). I had missed giving correct positions to the custom field.
Regards
Kishan

Contract item customer fields not getting saved from ITS side??

Hi there,
I have had to add "account assignment" details to a contract item (3 fields: account assignment, G/L account and cost center)...
All is going fine....in fact the 3 fields have been added on the contract item level in function group BBP_CTR_UI_ITS screen 4100. I followed the instructions in SAP note number 458591 "user defined fields: preparation and use"...
The 3 fields I added where "generated" down to SAP table level and now appear in table BBP_PDIGP...
Also when I create a contract from transaction BBP_CTR_MAIN and fill my 3 new fields in on the item level all works fine when I release the contract...the contract item gets created and the 3 new fields appear nicely in table BBP_PDIGP....so from the GUI side all is PERFECT...
I have worked on the ITS side of things quite a bit but now I clearly don't understand something...
I go to "internet service" BBP_CTR_MAIN - template SAPLBBP_CTR_UI_ITS 4100.....I have added my code and my 3 fields display perfectly on the web page....for each contract item.....
As I said I can make the contract with the 3 new fields filled perfectly via the GUI (transaction BBP_CTR_MAIN)....and if I VIEW that contract on the web it also displays perfect with the 3 filled in fields....
If I COPY that contract.....and save the new one, the 3 fields are still fine, all saved.
NOW COMES THE PROBLEM:-)
If I create a new contract from the web, fill in my 3 fields on the contract item level THE 3 FIELD VALUES SEEM TO NOT GET POSTED BACK AND SAVED IN THE SRM DATABASE...
I have tried everything from using FIELD-GET, FIELD-SET...the note I mentioned above mentions some BADI's that I could possibly use:
BBP_CUF_BADI_2 (modify screen methods etc)
BBP_DOC_SAVE_BADI
All I really want to try understand is how interaction between the user clicking on the web page and the SAP GUI screen flow is really happening.....I mean I see in function group BBP_CTR_UI_ITS there are a number of function modules with ITS in them, are those function modules just called when the user is clicking on the web (via ITS etc) - I would assume so...
Bottomline is I need what is happening in the SAP GUI to happen on the web as well.....it is almost there, I just need a push in the right direction so that I can grab the fields from the web page, in the most standard way possible.
Thanks for the help, I am very curious to see how this sort of solved.
Regards
Lynton

He Yann,
We are running SRM 3.0, EBP 4.0 - support pack 8
Thanks for the help
Lynton

Custom fields not getting updated in Mass Maintenance-MM17

Similar Messages

Maybe you are looking for