Blank not Zero for Display in report

Hi,
For a Particular Calculated Key Figure X, I get a Zero value using a logic such as
if Y=0; X=0.
For Display in Report, Currently it shos the vakue as Zero. I want to show it as a blank vaklue instead.
Could you suggest how to achiev this ?
I can not suppress Zero becuase for the other Key Figures in the report, i should show 0 as 0 only.
Please acknowledge
Regards
Shweta

Hi,
In the query designer, go to query properties, the button is just before the check query button. In the Display tab, in the section Number format, you have a setting for Zero Value Display. Click on the options and select, Suppress Zeros. You also have the option of showing the zero as something else.
This setting is different from the Suppress zero setting, which will suppress the line when all key figures are zero.
Rgds

Similar Messages

Query of Query count(column) returns blank not zero

This appears to be a bug in 7,0,1,116466 and 8,0,1,195765
Query of Query count(column) or count(*) returns blank not
zero when there are no matches. Properly returns a number when
there are query matches.
e.g. select count(i_id) from PersonnelQuery where i_id <
100
Where does one report these?

scottcook,
This was a known bug in ColdFusion 6.x which has apparently
not been fixed.
Bug in CF6 (See the Comments section of the page linked
below)
http://livedocs.adobe.com/coldfusion/6.1/htmldocs/using_29.htm
Workaround
http://www.bennadel.com/blog/244-ColdFusion-Query-Of-Queries-Odd-COUNT-Behavior.htm
To report this as a bug
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

"Drilldown characteristic" not permitted for display hierarchy

Hi Experts,
I want to display the hierarchy in my BEx Analyzer for which i tried to activate the hierarchy for the same and got the below error.
"Default values "Drilldown characteristic" not permitted for display hierarchy"
Also I have used a standard variable for this infoobject and it is used for user input in the selection screen of the report.
Eventhough we proceed further with this message, in the Report display, it is not showing the hierarchy in the display.
Please respond ASAP.
Rgds
Kumar

Hi,
I don't know why you are getting this error. But we can create hierarchy either by using herarchy name or else by creating hierarchy variable......In characteristics for which you are creating hierarchy, in display tab of properties give DISPLAY AS KEY, SORT CHARACTERISTICS -- AS IN THE QUERY and RESULT ROWS --- ALWAYS SUPPRESS....
In HIERARCHY TAB --- Give Hierarchy name select use hierarchy setting check boxand select always show radio buttons......
Do in this way and it may work......
Regards,
Kalyani.

Tcode SD related for displaying a report with completed deliveries

Dear SAP Experts,
I would like to ask you a question.
Is there any Tcode for displaying a report with all the completed outbound deliveries (8000++) or posted goods issues (4900++) with the relevant net values of the relevant sales orders, BEFORE the creation of the relevant billing documents.
Great Thanks in Advance
Kind Regards
John

You can use transaction VF04 - Billing due list.

Zero balance display in report painter reports

Hi all,
I have an issue with some report painter reports where the "print zero balances" flag is switched on in both the report and the section layouts, however the accounts are still not appearing on the report.
The accounts do not have any postings in the current year and the Bal carried fwd was zero in all profit centres but my client would still like to see a zero value on the report. Any suggestions?
Many thanks
Phil.

Also, when I display the balance of the accounts that appear on the report in FAGLB03, I get a screen showing a zero balance in all periods.
When I display the balance of the accounts which do not appear on the report in FAGLB03, i get the message that "no data exists for fiscal year 2009".
I have tried re-running the balance carry fwd transaction but this has had no affect.
please help!
Thanks
Phil.

Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
null

It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling

Inputs required for Displaying whole Report in Single Currency only

Hi All,
Actually in R/3 Transactions are recorded in different currencies like 1)USD
2)AUD,CAD,EURO(Non-USD or FCC)
Firstly,
I need to display whole report in USD only. I have to convert all other currencies to USD (What are the posssible options and how to handle Currency Conversion)
Second Scenario
Moreover I have to provide Selection Screen options for Query in such a way that query has to display like below
1) USD only.( If I give USD in selection screen of query it has to Retreive USD data only)
2)FCC(NON-USD) only.(It has to retreive AUD,CAD,EURO etc only)
3)Doc Currency (if i give whatever currency like it that may be USD or CAD or AUD that only should be retreived.)
How to handle the above Selection criteria
As iam not aware of the above Pls be very clear.
Regards,
C.V.

Hi,
If you shift the display mode of FF7B to standard Overview (F9) or click balance on display currency, the values will be shown in selected display currency in the entry screen.
The pre-requisiste for getting correct value is to maintain the curr conversion table daily using OB08.
Regards
Prasad AV

Colwidth_optimize not working for alv grid report

Hi friends,
         I have developed an ALV grid report using 'REUSE_ALV_GRID_DISPLAY'. The field catalog field columns are having the heading size more than 30 characters. So, to optimize the size of the headings, I am using SLIS_LAYOUT_ALV and passing the value 'X' to colwidth_optimize.
but still the column heading is not getting fully display. Rather it is display first 20 characters only.
For your reference please find the code snippet
*bold* **************** declarations ************************ *bold*
DATA : fieldcat       TYPE slis_fieldcat_alv,
             t_fieldcat     TYPE slis_t_fieldcat_alv,
            ws_layout      TYPE slis_layout_alv.
*bold* **************** field catalogue ********************** *bold*
CLEAR fieldcat.
fieldcat-fieldname     = 'RFWRT_PD_MTRL'.
fieldcat-seltext_m = 'Pending Quotation Spares Value'.   {quote} this heading not getting fully displayed {quote}
fieldcat-tabname       = 'IT_FNL'.
***    FIELDCAT-REF_TABNAME   = 'VBFA'.
fieldcat-col_pos       = col_pos.
APPEND fieldcat TO t_fieldcat.
ADD 1 TO col_pos.
CLEAR fieldcat.
fieldcat-fieldname     = 'RFWRT_PD_SERV'.
fieldcat-seltext_m = 'Pend Quot-JobWorkVal'.
fieldcat-tabname       = 'IT_FNL'.
fieldcat-col_pos       = col_pos.
APPEND fieldcat TO t_fieldcat.
ADD 1 TO col_pos.
ws_layout-colwidth_optimize = 'X'.
*bold* ****************************** alv grid function call ******************** *bold*
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
*    i_buffer_active                         = space
      i_callback_program                  = sy-repid
     i_callback_user_command        = 'USER_COMMAND'
***   i_callback_pf_status_set           = 'PF_STATUS'
*   I_STRUCTURE_NAME                  =
     it_fieldcat                        = t_fieldcat[]
     is_layout                          = ws_layout
    TABLES
      t_outtab                          = it_fnl
   EXCEPTIONS
     program_error                      = 1
     OTHERS                             = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR wa_fnl.
Please look into it.
Searched the forum for the similar issue. but didnt got any solution.
Thanks and regards,
Murali Krishna

Hi DaveL,
Thanks alot for your help. My problem solved.
Can you please suggest me how we can optimize the column based on the total amount which is summed up (fieldcat-do_sum)
Regards,
Murali.

Monitoring not possible for custom layout reports

It seems that the monitor log doesn't track hits for reports created with the report wizard where "Custom" is chosen as the style in the "Report Layout" step of the wizard (for editing the HTML manually). If I choose "Tabular" or "Form" everything seems to work fine.
The "Log activity" option is checked for all mentioned reports.

Hello, I have the same problem to register in log the customized reports that I have created. How I can do this?
Thanks

Suppress zeros for Drill down report

Hi,
I created a query with five structures(A,B,C,D,E) in rows,each structure is restricted with different items.I suppressed the zero valuse in query properties
by Active(All values=0),this will work for individual sets,but how can i suppress the zeros for entire query.
For Example: The user will select particulat set(A) and click Filter and drill down accoring to ->Item,how can i achive this for all sets(A,B,C,D,E) at once.
Thanks,
Bala

Hi,
I created a query with five structures(A,B,C,D,E) in rows,each structure is restricted with different items.I suppressed the zero valuse in query properties
by Active(All values=0),this will work for individual sets,but how can i suppress the zeros for entire query.
For Example: The user will select particulat set(A) and click Filter and drill down accoring to ->Item,how can i achive this for all sets(A,B,C,D,E) at once.
Thanks,
Bala

Drilldown on Query not working for Transactions(SQ01--Report Assignments)

Hi !
I created for deliveries and through SQ01 -- Report assignment I added two
transactions VL03n And VA03. When I execute the query and double click on the
delievery number it takes me to the particular delivery clicked on in VL03n,
but when I clcik on the sales document and select the display sales document,
it does open the VA03 transaction but does not auto populate the transaction
with teh sales document that I clciked on. Could anyone please explain me why
it does not auto-populate with the sales document number , but when deliverey
is clciked it directly takes me to the particular delivery screen?
Thanks
Edited by: Rob Burbank on Jun 18, 2010 2:19 PM

Any inputs/idea how to reslove this?
Thanks

Filter not working for a Webi report

Hi There,
We have a BOBJ Webi report having variable selection screen when I run the report with default fiscal year Ex.2012 it's working fine. Then by click on refresh button and trying to change selection value to Ex. 2013 and I'm unable to see any values even though it has values for 2013.
When I click on the filter bar then the values are appearing. Could anyone please let me know what could be the reason for this issue and how can we avoid this.
We are in BOBJ 4.0 SP6.
Thank you,
Regards,
Shiva

Hi Jakub,
Thanks for the reply, Please find the screen shots below
1. Report initial screen running with the default prod year for 2012 and it's working.
2. Then I click on refresh and run for another prod year it's not displaying values even though it has values for that prod year.
3. When I click on filter bar then the values are appearing. Not sure why it's behaving like this?
Also note that there is no filter, under query filters. Please give me any idea about this issue.
Regards,
Shiva

Language Translation is not working for Pick slip Report (XML)

Hi All,
I have to translate the Oracle Pick slip report(XML) in other language. So I export and upload translation file for different language but still it is taking default english template. It should refer the translation file but it.s not working. Could you please suggest me if I am missing something?
Thnaks,
Joohi

Hi,
Looking for some help on this.
Thanks in advance!
Venkat

Webdynpro development in for Displaying Tax report in ESS.

Dear Expert,
I am working with EP 7.0 and ERP 200r specifically on ESS.
In the business package for ESS there is no standard iView that shows Tax report.
Now I want to develop an iView (in Web Dynpro) that displays fetches tax report from R/3 from transaction pc00_n20_laps_lpo.
Suggest from your experience how to achieve it.
Regards

what are you looking at when you say tax report ... if you are looking at something like form 16 but every month then you can use the fms available and you can take an approach that is taken for payslip please.

Concat rows into one string for display on report

I have a result set having 1 column and multiple rows.
On the report I just want to display all the rows comma separated.
For example:
Name
RAM
GURU
Sundar
Shyam
Inba
KalaiOutput:
"RAM, GURU, Sundar, Shyam, Inba, Kalai"Any help appreciated
Thanks.

Hi,
it's ok like this.
The result will be your return value.
The reason is that if you choose context instead of value that you could have more than one return value.
In your case you could use the code of Rohit and then just map it like
input (with context E1EDPT1) -> UDF -> target
Regards
Patrick

Blank not Zero for Display in report

Similar Messages

Maybe you are looking for