Blank screen after saving bios

I'm having a similar problem to other users I've seen on this forum.  Except I bought 1 512 stick (exactly the one that is on the MSI list of compitable memory).
If I clear the CMOS I can get into the bios and everything seem to be fine but when I select save and exit I get a blank screen and eventually my monitor times out.  
I've tried the memory in all 3 slots I even replaced the memory with a new stick (same type) but the new replacement is just the same.  I'm running bios v 1.2 and have tried 1.0 and 1.1 with the same problem.  
This is a completely new system so it's never been working.
Any help is appreciated.

With Only 16 Amps Available on your +12V Rail, I Have to agree with Jocko....Your 64 Bit CPU with it's 1MB of L2 Cache can require up to 11.0 Amps. Combine this with any Performance Vidio Card in the "PRO" or "FX" Flavor, that can draw an additional 6-7 Amps off of your +12V Rail, and Now you are already at MAX of your PSU. Not to mention that you Only Have 22 Amps available on the +3.3V Rail which is the Memories Rail, (It should Be No Less than 28-30 Amps). Any Performance CPU whether it be an INTEL Northwood or Athlon 64, Should have a PSU that has a minimum of 20 Amps on the +12V Rail. And if this is not the Whole Problem with your System, it will undoubtedly Become the Only Issue, Because yor PSU will be constantly Operating at or Above it's Designed Output therefore endangering the Rest of your System. I say this Because I have seen first handed what happens when a PSU Blows And a majority of the time, they wind up Taking the rest of the System with it .....Keep in Mind that the MOST Important Componant in ANY Performance Rig, is a Quality Powerful PSU....You should have at least 450+ Watts for your Rig....You should try to get Either an ENERMAX 465W-VE or an Antec 480-True-Power......Try Plugging in your Componants to this Calculator, and Keep in mind this is a Very Conservative Tool>>>>>> http://www.adecy.com/psu/  ..............Sean REILLY875

Similar Messages

  • Hp Pvillion G6 2005ax with AMD Quad Core is showing blank Screen after latest BIOS Update

    Hi
    I have strange issue after the Hp Software Update. Recently i have connected to High Speed internet and Hp Asistant shown a Bios update for my System and i chose download. after that my Hp Pvillion G6 2005ax with AMD Quad Core is showing blank Screen and Caps Lock button Blinks Randomly and F12 Button also on. Kindly Suggest a Solution for this. I have been irritated by Hp Customer Care support.
    My Mobile No. [Personal Information Removed]
    Email ID is [Personal Information Removed]
    for any help you can send or i am availbale on above contact address.

     Hello , Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I read your post about the BIOS, and wanted to assist you! The blank screen and blinking of your Caps Lock, is the system trying to give you the error code for the issue your notebook is having.  You can review the following document for further assistance, if needed:HP Notebook PCs - Computer Does Not Start and Emits an LED or Beep Code Please note the blinking sequence of your Caps Lock, and follow the instructions in the document above.  From the information that you provided, it is possible that the blink code will be related to a BIOS error.  You can always try performing a System Restore, to set the notebook back to a previous working point. You can also try checking this site for BIOS drivers. Once there, you can select your Operating System and click "Update", you should be able to access and download the  BIOS drivers.  If you downloaded the latest driver from that site, try uninstalling the driver and installing the previous version. Please let me know if this information was helpful by clicking the thumbs up below.
    Have a great weekend!

  • Blank screen after startup. bios corrupted

    Hello,
    I could really use some help I have a massive project due in a week and cannot access MATLAB anywhere but my laptop. Today windows decided to do its own thing like always and update itself which never seems to work right. But when restarting HP's terrible software also decided to attempt to update my bios. Like usual it failed and proceeded to corrupt my bios for the second time. Unfortunately this time I am out of warranty so they will no longer assist me even though this has been a recurring problem. Could anyone help me figure out how to get this working again? I have been searching Google, but nothing has worked for me I have an ho envy 15" which I believe model jt-1500. I really don't have anymore time to spend on scouring the internet with work and school and really need my laptop to just work again. I can also tell you I'll never buy an HP laptop again unless they can get their software figured out because I am afraid to ever update anything on my computer now.
    Thanks for the help in advance

    Hi,
    As I dont have the computer infront of my I am limited in things I can do to fix the problem please try the following two things below to see if they fix your problem if they dont your only option will be take your laptop in for repair howerver you dont have to take to HP you can take it anywhere.
    First thing I would like you to try is a power drain to do this remove the AC adapter from your pc and remove the battery, once you have done this press and hold the power button for 20 seconds once this is complete reinsert battery and AC adapter and try the computer again.
    The next thing you could attempt is updating the bios this hopefully will install successfully this time, to do this press and hold down the windows key and the letter b on the keyboard then power on the computer still holding down the two keys it will attempt to update the bios.
    Hope this helps,
    James

  • PC fails to reboot and shows blank screen after automatic windows updates including SP

    Pavilion- a1130n"  WINXP ProfessionalC fails to reboot and shows blank screen  after automatic install ing windows updates including SP 3

    I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
    build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
    I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless.

  • Blank Screen after 703HP3 (Linux)

    Hi,
    after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
    HP703HP3 I got a blank screen after starting the machine.
    All logs look got but I can't login in. Only a blank web page. No login. No
    picture. Nothing.
    Any idea?
    Have anybody the same problem?
    I went back to my snapshot. So my user can login.
    Now I will try it at another server.
    Andreas

    Hi Massimo,
    the login web page for webaccess for the user...
    Andreas
    "Massimo Rosen" <[email protected]> schrieb im Newsbeitrag
    news:[email protected]..
    > Hi,
    >
    > Andreas Schild wrote:
    >>
    >> Hi,
    >>
    >> after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
    >> HP703HP3 I got a blank screen after starting the machine.
    >
    > What do you mean "a blank screen"? A blank screen where?
    >
    >> All logs look got but I can't login in. Only a blank web page. No login.
    >> No
    >> picture. Nothing.
    >
    > I'm sorry, but it's totally unclear what you're talking about. What web
    > page?
    >
    > CU,
    > --
    > Massimo Rosen
    > Novell Product Support Forum Sysop
    > No emails please!
    > http://www.cfc-it.de

  • Blank Screen after Hibernate

    Hi,
    On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
    The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
    I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
    My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
    I've got the latest drivers according to the HP driver update utility.
    Anyone with the same problem or have a solutions?
    Thanks,
    Dean.

    Hi,
    On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
    The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
    I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
    My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
    I've got the latest drivers according to the HP driver update utility.
    Anyone with the same problem or have a solutions?
    Thanks,
    Dean.

  • Laptop only coming up with a blank screen after set-up?

    Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
    Cheers

    Hello @15_,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Bootcamp goes blank screen after startup sign.

    I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

    @MT1 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Blank screen after login in SAP CRM 2007

    hi,
    we are experienceing blank screen after we login to crm2007 web client.
    what we have done
    - implemented sap note 168941, 612670, 1045941, 1144511
    - assign PFCG role to business role
    is there any other step we missed?
    Thanks.

    Hi friend,
    Please, check if in your pfcg profile you have the objects:
    uiu_comp
    CRMCONFMOD
    with value *
    Regards,
    Lalas

  • SAP BPC 10.0 Web Client Blank Screen after login

    Hi ALL,
    We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
    We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
    Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
    I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
    If you have the same issue, kindly share..
    Thanks and regards,
    Hery

    Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
    Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
    Thanks and regards,
    Hery

  • 3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please

    I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions

  • Blank screen after setting back to Factory Default Setup

    After setting an HP Pavillion laptop with Windows XP back to the default factory setup, I get nothing but a blank screen after turning the laptop on.  The HP screen doesn't appear, there is just a blank screen.

    I have also gotten the blank, black screen, after using the Recovery CD's from HP on THREE different computers, please, if anyone knows how to help, HELP. I get nothing, tried hard off, new memory, new hard drives, no battery, battery, new battery, new a/c adapter, etc. Only one is still under warrenty, a HDX-16t, the other two, an HDX 16 and a Pavilion -1135nr

  • Blank document after saved as a pdf

    Blank document after saved as a pdf

    You do not really expect anybody to understand what you are asking...?

  • Blank screen after KitKat update

    I just completed the KitKat update on an Ellipsis 7 tablet that's connected to Verizon's network, but now I'm only getting a blank screen after the welcome screen displays. Fyi: the first part of this update went smoothly. Can anyone can help me resolve this issue? I really like this tablet and use it everyday.

    I contacted Verizon support and a couple of techs attempted to walk me through alternate boot methods. However, as bassclarinetl2 noted, "pressing the power button to turn the device off results in the device powering up by itself and both 'safe mode' and 'factory reset' are inaccessible via their button combinations." Therefore, I'm sending my tablet in to be repaired or replaced under warranty. Depending on how long you've had your Ellipsis 7 tablet, you may be able to do the same.
    Incidentally, I have another (seemingly) identical Ellipsis 7 tablet and was able to successfully install the KitKat upgrade on this second tablet, which I'm using now. The sooner Verizon determines why the upgrade worked on one tablet and not the other, the better.

  • Blank  screen after signing in

    I'm stuck in a blank screen after signing in.  The options to sign in or sleep function, but nothing else. And when I sign in the screen is blank.

    I am new to the "community thing"... I have the same question as you regarding the blank screen... I do not see any answers to your questions or know how to get to them...

Maybe you are looking for