Blank Spaces in TDMS file Properties
hi,
I want to re write the property (in labview )" Storage date/time " with the actual value(datetime)
but what does diadem expect the property name to be as it doent accept blank spaces etc (converts everything to "_"
is there any trick for this how to insert the propertyname.
names without blank r not an issue
Hi aparab,
Check out this white paper that talks about this property and lots of other points regarding writing TDMS files with LabVIEW that work well with DIAdem and the DataFinder.
http://www.ni.com/white-paper/14252/en/
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Similar Messages
-
How to remove extra blank spaces from log file.
i have created a log file which contain the logs of a program. the logs are getting created fine for the first execution of the program but from the second time the log file is getting blank space's after every character.
i have used the code to append the text in log files few examples :
'Clean up process started....' >> $log
File name :'+ $files +'Time-Stamp: '+ $endtime +'Search complete.' >> $log
.i want to remove the extra spaces after each character but not all the spaces from the file. Thanks in advance.hi mjolinor
add-content is used to insert text it does not append text at the file .i used >> to append the text on log file ..
from
Get-Help ADd-Content
Synopsis
Appends content, such as words or data, to a file.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " " -
How to remove empty space from a file
Hi all,
Can any one help on how to remove the blank spaces from a file.
I used trim function but unable to remove the spaces.
I have a file in which there is a name like 'JAIRAM' and am storing this file in a variable FILE_CONTENTS.
Now am unable to compare FILE_CONTENTS with another value as it is storing empty spaces also from the file.
Please help on this
Thanks,
SriniTrim only trim at the beginning or at the end. Can you try using the replace sql function.. see below..
SQL> select replace('abc def',' ','') from dual ;
REPLAC
abcdef
cheers -
Hi,
Has anybody got a good example VI for scaling TDMS files. I've capured data using the VI attached and I want to scale this data to a new file using scaling slope and intercept derived from a calibration VI. I thought this would be straight forward but when I followed the example NI provide it does not change anything but the scaling information writen to the TDMS file properties. The data remains the same.
Thank you
Dan
Donners
Solved!
Go to Solution.
Attachments:
Data Aquisition Block Diagram.JPG 133 KBHi,
I've attached the signal conditioning VI that tries to scale the data from the 'Raw Data' group of the 'Raw Data' file to a 'Scaled Raw Data' group in a new 'Filtered Data' TDMS file. For some reason it saves a 'Raw Data' group in the new 'Filtered Data' file, that shows the new scale in the properties but the values have not been changed from the source 'Raw Data' file. I know that's a bit of a tongue twister, but I've attached the new 'Filtered Data' TDMS file that might illustrate what I'm talking about.
Thank you,
Dan
Donners
Attachments:
Signal_Conditioning_VI.JPG 471 KB -
Properties in TDMS file not visible in Diadem
Hi,
I'am using Diadem 2011 to read a tdms file created in LabVIEW 2011.
In diadem i cannot see the properties (file, group or channel) i added myself to the tdms file, in LabVIEW withe the TDMS file reader they are visible.
Attached (in the zip), the TDMS file and an word doc with some screenshots.
Somebody knows what i'm doing wrong?
thx
Ben Engelen
Solved!
Go to Solution.
Attachments:
No Properties in Diadem 2011.docx 186 KB
BenenWalter.zip 190 KBHello Ben,
the properties are loaded but not all properties are displayed in the Properties node in the tree control automatically. The context menu offers the ability to display properties in the tree.
But if you klick on the main root/group/channel node in the tree the properties are displayed in the window right bottom. There you will see your properties.
But in the DIAdem/DataFinder naming conventions following happens.
If you use one of the following characters in a custom property name, DIAdem replaces this character with an underscore: ., :, ,, ;, ', \, @, <, >, #, [, ], %, (, ), {, }, |, *, ?, =, !, ", ^, $, &, +, -, /, and a space.
So if you do not want to run into this you should rename the properties
Greetings
Andreas -
How to generate blank spaces at end of the record in a flat file with fixed
Hi,
I am generating a flat file with fixed length.
In my ABAP program, i am able to see the spaces at the end of the recors in debug but when download to applicaiton server i am not able to see those spaces.
How can i generate blank spaces at the end of the record in a flat file?
Please update
Thank youHow are you downloading the file? And, How are you looking at the file on the application server?
Can you provide snippets of your code?
Cheers
John -
File Content Conversion Removes Leading Blank/Space
I'm having a problem where file content conversion is trimming leading blanks/space/whitespace from fields when reading in the inbound file. I've seen where people have posted that you need to use fieldContentFormatting to prevent content conversion from stripping the leading/trailing whitespace. I added that parameter to my list (see below example) but it still appears to be trimming the leading whitespace. Look forward to hearing your thoughts. Here are the details:
I'm using fixed length file content conversion for Sender File Adapter (SP15). I have the following parameters set:
Document Name = MaterialData
Recordset name = item
Recordset Structure = MaterialLine, 1
I have:
MaterialLine.fieldNames = matno_external, mat_description
MaterialLine.fieldFixedLengths = 40, 40
MaterialLine.fieldContentFormatting = nothing, nothing
The following is the input file (notice spaces prior to second occurrence of material numbers)
ZED00000001 AIMS LIGHT A
ZED00000001 AIMS LIGHT B
ZED00000002 AIMS SWITCH A
ZED00000002 AIMS SWITCH B
ZED00000003 AIMS SEMICONDUCTOR A
ZED00000003 AIMS SEMICONDUCTOR B
The following is the source XML after file content conversion from SXMB_MONI (note spaces no longer exist in matno_external tag).
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MaterialData xmlns:ns="http://xxxxxxx.com/yyy/test">
- <item>
- <MaterialLine>
<matno_external>ZED00000001</matno_external>
<mat_description>AIMS LIGHT A</mat_description>
</MaterialLine>
</item>
- <item>
- <MaterialLine>
<matno_external>ZED00000001</matno_external>
<create_date>10/09/06</create_date>
<mat_description>AIMS LIGHT B</mat_description>
</MaterialLine>
</item>
- <item>
- <MaterialLine>
<matno_external>ZED00000002</matno_external>
<mat_description>AIMS SWITCH A</mat_description>
</MaterialLine>
</item>
- <item>
- <MaterialLine>
<matno_external>ZED00000002</matno_external>
<mat_description>AIMS SWITCH B</mat_description>
</MaterialLine>
</item>
- <item>
- <MaterialLine>
<matno_external>ZED00000003</matno_external>
<mat_description>AIMS SEMICONDUCTOR A</mat_description>
</MaterialLine>
</item>
- <item>
- <MaterialLine>
<matno_external>ZED00000003</matno_external>
<mat_description>AIMS SEMICONDUCTOR B</mat_description>
</MaterialLine>
</item>
</ns:MaterialData>Thanks all for your attempts but I figured it out and wasn't this the biggest case of irony.
Here I was trying to prevent leading spaces from being trimmed in the loading of my file and my problem was that when I typed:
MaterialLine.fieldContentFormatting
I actually left a "blank" at the end of the "g" in Formatting. Apparently XI didn't like that and neither gave me a runtime or compile error. Anyway I found this and though I'd share in case anyone else encounters it. I removed the blank and all is working now. -
PI removing blank spaces at the end of the lines in a plain text file
Hi -
I have an interface that transfers a file via FTP. I defined both the sender and receiver to transfer either Text or Binary but the interface removes every blank space I have after the last character. The file is a fixed lenght file.
Example:
Original file:
Hello world(space)(space)(space)(space)(space)(space)(space)(space)(eol)
where (space) is the space character and (eol) is the end of line char.
File after it is received.
Hello world(eol)
I already defined the parameter Row.fieldFixedLenghts with 10164 which is the lenght of the lines of the file.
Any ideas why it may be happening?
Thanks,
Carlos.Hi -
I tried both the parameters:
xml.fieldContentFormatting
structure.fieldContentFormatting
The received file still has the problem. All the blank spaces are cleared out.
The file is a plain text file not an XML file. May this be the issue?
Thanks,
Carlos. -
I need a powershell command to replace unicode chars in a file name to a blank space
Can anyone provide me with a powershell command which will search and replace a specific unicode character in a file name to just a blank space?
ThanksHi Roadster198,
In addition, if you want to search and rename the text files under a folder, please also check this script:
Get-ChildItem -Path d:\test1\1\*.txt -Recurse| where{$_.name -like "*ф*"}|rename-item -newname { $_.name -replace "ф"," " }
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
TechNet Community Support -
Remove blank spaces in excel output file
it is a BOM report and the output is into a excel file.
problem with the excel file output is : i gives blank spaces sometimes after the number and sometimes before the number...
so, how can i remove those blank spaces for the values.
ive nearly 15 columns having values in each column.
so, how to get rid of blank spaces for these values in the columns in the xls file. is there any fn..module or a command that i can put in the code.Hi,
above mentioned FM canbe used to eliminate extra zeros in char field. eg. material number.
MATNR will contain 18 char.-000000000045678925.
toget only 45678925 F.M -conversion exit can be used.
for ur reuirement use SHIFT statement only.
regards,
Prashanth Maturu. -
My Essbase Server Crashed and as i review the log i have about 5 pages of blank space
any ideas whynot sure why ur log files are cleared but
i guess you should go through this
ftp://ftp.software.ibm.com/software/analytics/spss/support/In2Quest/DOCS/DBAG/dstinteg.htm#9320 -
How to use blank space replace NULL on discoverer viewer
Hi,
There is a report that has a varchar field should show text values, and if NULL, I need it show blank space, and does in disco desktop, but on viewer, the same worksheet shows NULL.
Even I changed in the Tools - Options - Format menu(desktop), it still show NULL on viewer.
why?
please help! thanks!
sammyHi Sammy,
Unfortunately ‘some’ of the settings set in Desktop do not carry over to Viewer. These options need to be defined for Viewer itself.
A temporary way to set the Viewer settings is to click on ‘Options’ when logged in Viewer itself. You’ll have to open a responsibility or report before this option becomes available to select. Within here you’ll be able to change the way NULL values are seen. However this method only makes the change for the User you logged in with.
To make the change for all users, it’s best to edit the PREF.TXT file on the Discoverer Server. Please view the documentation below for more information on how to configure Viewer. For windows platform click here : http://download-uk.oracle.com/docs/html/A90287_01/toc.htm,
For Unix platform click here : http://download-uk.oracle.com/docs/html/A90288_01/toc.htm. Once you’ve run the applypreference script, these settings will be forced down to all users of Discoverer.
Hopefully this will help ;-)
Lance -
How to remove the extra or blank space from RTF Template
Hi All,
Try to remove the extra space from xml template.
Here I have attached the .xml file with .rdf, here the issue is when you load the data we will get 2 page output but when I am trying to add any column or extra space in the last page of this template the output getting 4 pages with lot of blank space. Could you please guide me to solve this issue.
Could you please let me know how to do the attachement in this forum as I am new to this community.
Regards,
SushantCan you drop in a mail with RTF, xml data to [email protected], I will help you on the issue.
-
Instead of showing 0 in report its getting blank space
Hi Sap Gurus.
I am running the query in rsrt, in my report i am getting instead of 0 values it is showing Blank space. But in my source data there is value is 0. But when i execute the query its getting blank space. How to over come this problem.
could u please let me know.
Best Regards,
venkat.Hi,
Check out this.. it might solve your issue.
in Query Properties
Tab: value display >> Zero value Display >> Select "zero as Default Text" under Display Zeros
And Tab: Rows/Columns >> Supress Zeros Option >> "Do not Supress" is selected.
Thanks
Jitu
Edited by: Jitenderkumar Danduvia on Feb 23, 2010 12:45 PM -
RTF Template Blank Spaces Issue
Hi,
I have one issue in the RTF File. I have developed templates for the dunning letter report.
If i have only one line in the main body table and below this table i have some contents information for the customer to print in the report. The issue is there is blank spaces between the table and the contents when i am printing one or two invoices in the report.
I want to remove this blank spaces and bring the contents information to print just below the table even it is sinle report or many records in the report.
please guide me if any one come accross with this issue.
with regards
RamHi,
Make sure there are no spaces before/after your form fields - put them on their own line with no spaces in between. On their own line they don't generate an extra line.
If you are still having problems email me the xml and rtf ggr888 [AT] gmail [D0T] com
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/
Maybe you are looking for
-
็็How can i use multiple recursive in sql ?
I have 2 tables which have each with cte itself For position Table CREATE TABLE [Dep]( [Depid] [int] NULL, [DepName] [nvarchar](50) NULL, [Depparent] [int] NULL INSERT [dbo].[Position] ([poid], [poname], [poparent], [Depid]) VALUES (1, N'saleLeader'
-
i connect my ipod using my charger and it is shown on my computer (Windows 7) as a USB and it charges aswell but it doesn't show up on itunes.Whats happening?
-
How can I stop apps from automatically opening the most recent file?
Why do apps running under OSX insist on loading the last-opened file whenever you start them up? I've seen this now with Preview and QuickTime so far and it's really annoying. If I double click a file to preview or play it, why would I want the last
-
Re: experiences with printing using Word/DDE sought
DDE is not that reliable. Try using OLE. We are using OLE to talk to Lotus Word and its working out OK. ka john.jamison @ Sagesoln.com ("John L. Jamison") 10/07/96 10:53 AM To: forte-users @ Sagesoln.com @ Internet cc: (bcc: Kamran Amin/NAC) Subject:
-
MAJOR BUG - !!! Please Help!!!!!
I've been working on a song and saving regularly but I cannot load it after quitting and restarting logic. i get an error that says " out of memory cant insert or delete data " this is a consistent repeatable error on this particular song. I've loade