Block the Material at Item level in Sales Order automatically for delivery

Hi!
My business scenario needs a material to be Ckecked for Inspection after raising the Sales Order by thirdparty person. So, I need to block that particular material at Item level automatically for delivery and rest of the line items can get delivered. I can do this by selecting the reason for Block at Item level manually, but I want the system to get detemine this block. And one more thing is that there is NO Quality Management module for this. So, let me know what I need to configure for this effect.   Thank you.....

hi,
pl check the user exit " userexit_save_document_prepare" or "userexit_save_document".
Take the help of your abaper to see if the logic written here can affect the item level block in the sales order for inspection. Create new reason for the item level block and have it triggered with this exit. Instead of hard coding which might require regular intervention of abaper for code changes for the business to be able to manage it, maintain a master data in the material master against some field with a key.
now use that key to identify if these materials require to be blocked at the sales order level for inspection. To release this item again the user has to go in VA02 mode to release the block. Let this be done after the inspection of that material.
regards
sadhu kishore

Similar Messages

  • How can we revise the pricing both at header and item level of sales order?

    Dear All,
      Now there's one issue of the pricing to me. i want to revise the pricing both at header and item level of sales order. but after i finished the cutomize and tested it, it's more different as i thought. i found that the pricing can revise at the one side only,for example, if i revise the pricing at item level and it's grey and can't be revised at the header. on the other hand, it's the same result what's happened at item.
      So, in my opinion, we can't revise the pricing both at header and item, right? if not, please give me more advices and teach me how to solve the problem. thanks a lot.

    Dear Lakshmipathi,
      Thanks a lot for your kindly and useful answer for me and I learn more for the pricing technology.
      I didn't notice the way that you reminded ago therefore I also saw the button at the condition tab. And your suggestion makes me know more.
      And I had tested the way that you said, I met with a question. Below is my opinion for my testing.
      I had created one SO and the pricing was $10, then I revised the pricing from 10 to 15 by VK11. It can't be updated automatically at SO and I must update it manually by clicking the "Update" button. This is OK for my testing, but I have another question to disturb you for the use of "Active" button. When I click the button and nothing is responsed, it's quite different what you said. So, please give more detail for the Active button. Thanks a lot.

  • Sending Alter Text by mail automaticlly on item level of Sales order.

    There is a 'Alter Text '  listed on the tabpage 'Texts' at item level in Sales order.  
    I want to send  content  of 'Alter Text '  by mail automaticly as end user change the text .
    How to implement this requirement?
    Thanks

    Hi,
    U can add the field in sales order header (Additional Data B tab). pgm name = SAPMV45A screen no: 8309.
    Regards
    Sathis

  • Plant Info is blank in Sales Order Due for Delivery (VL10A)

    Hi experts,
      In VL10A sales Order Due for Delivery, i have fields like Name, GI date, plant and shipping point. 
    There is data on shipping point.  However, the plant field is blank.  I like to get data for the plant.
    Can you pls point me to what user-exit or how  I can modify the program to bring data for plant ?
    I am aware that VL10A list orders at the header level.
    Thank you.
    Joyce

    closed.

  • Delivery block at item level in sales order,Qty should not be confirmed

    Dear all
    We have a below requirment
    We will have multiple line items in sales order and put delivery block at item level.If delivery block is put at item level it should not confirm the qty and pass on to MRP
    But if we put at header level delivery block,schedule line qty at item level are not getting confirmed.So requirements are not passed to MRP-This is correct .Working as per SAP standard configuration.
    Can you tell how to activate the same for item level delivery block.if same delivery block is put at item level,it is confirming the quantity.But we don't want confirmation of qty to happen.
    Can you give us solution
    Regards
    Sudha

    We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
    Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
    Check the  customizing OVZ8: if the flag  Transfer of Requirement
    Transfer of requirements of the requirement class should be ON.
    In the sales order the requirement type is determined by the combination sales order item + MRP type.
    Refer SAP Help URL below
    [Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

  • How to auto reset delivery block in item level in sales order

    hi i have one scenario. After creation of sales order it needs to be approved through work flow at item level so that without approval no delivery can be made. We have blocked the items in sales order now we want after approval the blocked status should be auto reset from block to free. how to do it.

    Hi,
    How is the approval taking place? Is it through work flow? If yes, You can write code for BDC or BAPI for removing the block after the approval step.
    If it is manual approval, then you can write a program with BDC/BAPI for removing the block with input as sales order number.
    Ask the approver to run this program after the approval.
    Thanks,
    Vinod.

  • Partner determination at item level in sales order

    Dear experts,
    I have 2 payers in customer master(sold to party). Is it possible to determine the partner function (Payer) at the item level in a sales order? I need to generate 2 billing documents with 2 line items. (1) Delivery related billing document (Item1) for which I want to bill to Payer 1. and (2) Order related billing document (item2) for which I want to bill to Payer 2.
    Currently the in the above process I am able to do it manually by changing the partner (payer) at the item level.
    Can the partner determination happen automatically based on the line items (Item category)? If possible, can it be restricted to document type?

    Dear Friend,
    The best option would be to enter / change the Payer manually in Partner Function.
    Or the other option is as you have entered 2 payers in Customer Master for a single sold to party, sustem woild be give a pop-up for selecting one of two Payer while creating Sales Order. But still you will have to change the Payer at Item Level...
    Also if Ship to Party is different then we have some option...
    Hope this helps...
    Thanks,
    Jignesh Mehta

  • Sales orders due for delivery beyond credit horizon date credit blocked

    Hi
              I have given credit horizon date as 1 month . When I create a sales order which has a single item and schedule line with delivery date after 45 days i.e clearly after the horizon date , document is blocked with credit limit block .
    I am actually testing the cycle after I changed credit horizon date from 3 months to 1 month .
    Is there any thing else to be done like running any reprort , etc ?
    Regards
    Raghav SSk

    Hi,
    I had the same problem. The Horizon the 1 month mean that every sales order that entry in the systen during the month, will be affected the credit exposure.
    For example.
    Today is 02/july and my horizon are 1 month, so the date are 01/august. Every sales order tha entering in period between july and august will be affect the credit exposure. The sales order entering in 05/august, the credit will be affected. The sales order entering in 30/august, the credit will be affected, but if you enter the sales order in 01/september the credit will not be affect beacause the month is different.
    Another example
    Today is 02/july and my period are 2 months, so the date are 31/august. Every sales order that entering in period between july and august will be affect the credit exposure. If a sales order entering in 01/september, the credit exposure is not be affected, because the month is different.
    Regards
    Paulo

  • Delivery & Billing Block at Item level in Sales Order ( Urgent)

    HI All,
    I am getting delivery & Billing block at item level when I create an order with config material.
    And I am unable to remove the blocks manually since they appear in display mode even in change mode of sales order.
    but I could see a biiling document for this order in document flow with 0 value.
    Note:
    1. The item does not have any reason for rejection
    2. Ther is no block set at schedule line category too.
    Please give me your valid suggestion as soon as possible since it is production issue.
    Thanks & Regards

    Hi Chandra,
    Please try with this
    Run VKM5 transaction with that delivery
    I hope it will help you,
    Regards,
    Murali.

  • How to limit the rows in the item level in sales order

    hi
    i have created a sales order here my requirement is in item level there are so many line items i want to limit the line items to 5 num is it possible

    Dear chandra
    In billing it is possible.  But if you want in sale order, apply user exit in program MV45AFZB - USEREXIT_CHECK_VBAP. 
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    thanks
    G. Lakshmipathi

  • Delivery address on item level in Sales Order causes delivery split

    Hi all,
    I have an issue where our customer is sending in EDI-orders with delivery address on item level. This generates different SAP addresses for each line in the Sales Order later causing a delivery split in VL01n. Normally a SO contains 20 items where 10 needs to go to one physical address and the other 10 to another. What I would like is to only split on the physical address and not on each SAP address. E.g. 2 deliveries created instead of 20.
    Its ECC 5.0.
    Anyone has experience to share on this issue?
    Thanks
    BR
    Peter

    We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
    Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
    Check the  customizing OVZ8: if the flag  Transfer of Requirement
    Transfer of requirements of the requirement class should be ON.
    In the sales order the requirement type is determined by the combination sales order item + MRP type.
    Refer SAP Help URL below
    [Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

  • Error 102 Access not made (initialized field) during pricing analysis in item level of Sales Order

    Hi SAP Experts,
    Good day!
    I am facing an issue in Pricing Analysis of a Sales Order Item level which is Error 102 Access not made (initialized field).
    Details for ZICT condition Type:
    Access Details:
    *ZINTER is originally used in billing and was decided to also use for order.
    There is no problem involved in billing.
    Please take note that I already found other discussions and an OSS Note regarding this issue and applied the suggested solution. But still I encounter an issue in the order created.
    After implementation of the proposed solution which is moving Material type(MARA-MTART) and Valuation Class(MBEW-BKLAS) to the corresponding fields TKOMP-MTART and TKOMP-ZZBKLAS.
    ZICT Condition Type details:
    Access details:
    As I mentioned above, I already followed steps in previous discussion.  It seems odd that there is still a problem. Can you please enlightnen me up and advice if there are things that I still  need to know.
    I am hoping for your response and help with this matter.
    *NOTE: The development Box that I am using is an ECC6 Upgrade development system

    Hi Please find the attached screenshot. Hopefully this will be of help.

  • Want to know the sale order report for Delivery bclok at header level

    Dear,
    i would like to know some reports
    1). I would like to know  is ther any  SAP std report  is available for Sale order if Blocked for delivery(VBAK-LIFSK)??
    2). is ther any report for knowing the Sale order  if header/item text  is maintained??
    Pl advice if any std report is available.
    Thanks in advance

    Dear Pradyumna,
    Thanks for your reply, I did't find any Header r item text in the report.
    Pl suggest is there any other report is availble???
    Thanks in adv.

  • User Exit for Updating Delivery Plant at Item Level in Sales Order

    Hello Experts
    There is a requirement to determine the delivery plant for each item level and than update the items with newly determined plant.  There is a user exit MV45AFZZ routine FORM USEREXIT_MOVE_FIELD_TO_VBAP. to update the item level entries in Sales Order in VA01 or VA02. Is this the right place to do this?, if yes , do i need to perform any other standard logic (like re determine Shipping points , schedule lines ) for newly determined plant? If not , can you please suggest any other place , BADI or user exit to change the delivery plant of sales order.
    Thanks a lot....
    -Harkamal

    Best place is MV45AFZZ-USEREXIT_SAVE_DOCUMENT_PREPARE. Populates the values just before saving the document. You can have your own deriving logic. Make sure that peice of code is trigger only for Sales Order create or change (VA01/VA02).
    Are you kidding???  You do realize that this is AFTER all validations against configuration, ATP, pricing, etc. have been performed??!!!  Never, ever change a critical value like plant in the SAVE user exits...

  • Complete Delivery at Line item level in Sales Order

    Hello Gurus,
    While creating a sales order for some customers (the sales area tab in the customer master data has complete delivery and full delivery at item level), the complete delivery flag should be enabled and partial delivery flag at item level shoulb be C.
    We have a situation where this is not working in some cases. I need to know what user exits are copying the customer master data into the sales order fields. Please give me a lead how I can proceed with this.
    Regards,
    Balu

    Hi Balu,
    Please check user exits in program MV45AFZZ.
    i.e USEREXIT_MOVE_FIELD_TO_VBAK 
    Regards,
    Gumanti

Maybe you are looking for