Complete Delivery at Line item level in Sales Order

Hello Gurus,
While creating a sales order for some customers (the sales area tab in the customer master data has complete delivery and full delivery at item level), the complete delivery flag should be enabled and partial delivery flag at item level shoulb be C.
We have a situation where this is not working in some cases. I need to know what user exits are copying the customer master data into the sales order fields. Please give me a lead how I can proceed with this.
Regards,
Balu

Hi Balu,
Please check user exits in program MV45AFZZ.
i.e USEREXIT_MOVE_FIELD_TO_VBAK
Regards,
Gumanti

Similar Messages

Delivery block at item level in sales order,Qty should not be confirmed

Dear all
We have a below requirment
We will have multiple line items in sales order and put delivery block at item level.If delivery block is put at item level it should not confirm the qty and pass on to MRP
But if we put at header level delivery block,schedule line qty at item level are not getting confirmed.So requirements are not passed to MRP-This is correct .Working as per SAP standard configuration.
Can you tell how to activate the same for item level delivery block.if same delivery block is put at item level,it is confirming the quantity.But we don't want confirmation of qty to happen.
Can you give us solution
Regards
Sudha

We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
Check the customizing OVZ8: if the flag Transfer of Requirement
Transfer of requirements of the requirement class should be ON.
In the sales order the requirement type is determined by the combination sales order item + MRP type.
Refer SAP Help URL below
[Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

Delivery address on item level in Sales Order causes delivery split

Hi all,
I have an issue where our customer is sending in EDI-orders with delivery address on item level. This generates different SAP addresses for each line in the Sales Order later causing a delivery split in VL01n. Normally a SO contains 20 items where 10 needs to go to one physical address and the other 10 to another. What I would like is to only split on the physical address and not on each SAP address. E.g. 2 deliveries created instead of 20.
Its ECC 5.0.
Anyone has experience to share on this issue?
Thanks
BR
Peter

We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
Check the customizing OVZ8: if the flag Transfer of Requirement
Transfer of requirements of the requirement class should be ON.
In the sales order the requirement type is determined by the combination sales order item + MRP type.
Refer SAP Help URL below
[Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

User Exit for Updating Delivery Plant at Item Level in Sales Order

Hello Experts
There is a requirement to determine the delivery plant for each item level and than update the items with newly determined plant. There is a user exit MV45AFZZ routine FORM USEREXIT_MOVE_FIELD_TO_VBAP. to update the item level entries in Sales Order in VA01 or VA02. Is this the right place to do this?, if yes , do i need to perform any other standard logic (like re determine Shipping points , schedule lines ) for newly determined plant? If not , can you please suggest any other place , BADI or user exit to change the delivery plant of sales order.
Thanks a lot....
-Harkamal

Best place is MV45AFZZ-USEREXIT_SAVE_DOCUMENT_PREPARE. Populates the values just before saving the document. You can have your own deriving logic. Make sure that peice of code is trigger only for Sales Order create or change (VA01/VA02).
Are you kidding??? You do realize that this is AFTER all validations against configuration, ATP, pricing, etc. have been performed??!!! Never, ever change a critical value like plant in the SAVE user exits...

How to auto reset delivery block in item level in sales order

hi i have one scenario. After creation of sales order it needs to be approved through work flow at item level so that without approval no delivery can be made. We have blocked the items in sales order now we want after approval the blocked status should be auto reset from block to free. how to do it.

Hi,
How is the approval taking place? Is it through work flow? If yes, You can write code for BDC or BAPI for removing the block after the approval step.
If it is manual approval, then you can write a program with BDC/BAPI for removing the block with input as sales order number.
Ask the approver to run this program after the approval.
Thanks,
Vinod.

How to place a delivery block at line item level from Inbound ORDERS IDoc?

Hi EDI/ABAP Experts,
Can anyone please tell me how to place a delivery block at line item level from Inbound ORDERS IDoc?
I tried using exit "EXIT_SAPLVEDA_001'. But there is no LIFSP field in either of XVBEP and YVBEP structures.
Can you guys throw some light. How to place a delivery block @ line item level on sales order from Inbound ORDERS IDoc.
Thanks,
Matt .

Look into the Include: LVEDAF5A that is the only place where this exit is hit... double click on the Structures and look which structure has billling block field.. and use that..
FORM CUSTOMER_FUNCTION_IDOC USING IDOC_DATA.
CALL CUSTOMER-FUNCTION '001'
    EXPORTING SEGMENT = IDOC_DATA
              DVTCOMAG = VTCOMAG
              DXMESCOD = IDOC_CONTRL-MESCOD
              CONTRL   = IDOC_CONTRL
    TABLES    DXBDCDATA = BDCDATA
              DXVBAP    = XVBAP
              DXVBEP    = XVBEP
              DYVBEP    = YVBEP
              DXVBADR   = XVBADR
              DYVBADR   = YVBADR
              DXVBPA    = XVBPA
              DXVBUV    = XVBUV
              DD_FLAG_P = D_FLAG_P
              DXKOMV    = XKOMV
              DXVEKP    = XVEKP
              DYVEKP    = YVEKP
    CHANGING DXVBAK   = XVBAK
              DD_FLAG_K = D_FLAG_K
    EXCEPTIONS
              USER_ERROR = 01.
If you are in ECC6.0 you can also use Enhancement point : INTERPRET_IDOC_ORDERS_01 SPOTS ES_SAPLVEDA. in include: LVEDAF2U

Delivery doc creation for a selected line item of the Sales order

Hi folks,
Can any one help me in how to create a delivery order for a selected line item of the Sales order.My requirement is the request comes from the web browser where a sales document and details of the items are shown the user select one line item and request for delivery create of that particular SO doc.I have used couple of FM to create delivery but the delivery create is depend on the schedule line dates so iam unable to figure out where exactly i can distinguish between the line items.
Example:
SO:- 11193645
Line item -1 has 2 schedule line 06/11
06/13
Line iteam-2 has 1 schedule line 06/12
so if i try to create Delivery doc for date 06/12
it creates partially for line 1 and line 2.
but my requirement is i wanted to create SO for only line item 1 as i wanted to process Del Doc for only line item 1.
If you have any idea please help me.

hi ,
You can develop a customised FM to process the Idoc data .
1. Read the Idoc data into internal table for the line items which need to be delivered .
2. Run BDC for transaction 'VL01N' ( delivery creation ) through which eliminate the line items which are not in internal table and save the delivery document
Note : Because in VL01N , you specify the sales document with respect to which you want to perform delivery hence automatically all items are copied to the delivery document .
During BDC recording , select items by " MOVING TO TOP"
and then deleting the selected item
If you face problem in BDC recording , i can help u that too .

Delivery of sub-items from a sales order

Hi experts,
We have a business requirement to be able to modify the customer's transmitted order line in a sales order. However, we would like to retain the customer's original order details.
In order to do this, we wanted to capture the original request as a line item in the sales order with a item category not relevant for delivery and billing. We then create a sub-item for the original line with UEPOS populated for the sub-item. This sub-item is relevant for delivery and billing.
However, we find that with the copy routine 101, SAP does not allow only the sub-item to be delivered. With the routine 110, SAP does bring in the sub-item, but blanks out the material number ( since it expects product substitution ).
Would appreciate inputs from the forum
Regards
Rohit Zalani

Hi Rohit,
It is ideally required to have both higher item and subitem in delivery. However the moment there is a sub item, the delivery quantity for higher level item becomes 0 and hence this will not affect the quantity to be delivered. Hence the presence of higher level item will not impact the delivery or PGI in anyway. You can check this.
Similarly for billing, you can check the Billing quantity field in copy control between delivery and invoice. The value has to be either G or H based on the scenario you want.
Having said all these things, I think just adding the customer entered material either in the customer material field in sales order (I think VBAP-MATWA) or in some other Z field will relieve you of this big complexity. So unless or otherwise your customer i adamant on this, you can think of a simpler solution than the multiple levels of items.

Send all line items of a sales order to IPC along with condition lines data

We wrote some pricing routines in R/3, where while doing he calculations for condition line item, we needed to pull in the material information for previous line items. So we exported vbap and imported it inside the routine to be able to have access to all the line items in the sales order. Now, we need to put in the same kind of logic in CRM/IPC. My question is what would be the equivalent of SAP's(import/export) commands for internal tables in case of IPC. I looked at the BADI CRM_COND_COM_BADI but still do not see how I can send all the line items data to IPC. So I guess, the question comes down to, how do I send all the line items of the sales order (whole VBAP in R/3 terms) to IPC along with the condition line data? Can someone please help?
Thanks

Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ

Difference B/W Delivery plant and item plant in Sales Order

HI,
May i know Difference between Delivery plant and item plant in Sales order and what is the use of those fields.What is the process of raising sales order for different plants.
Thnks&Rgds
NAG
Edited by: NAGA SUDHIR on Apr 3, 2009 6:10 AM

HI G. Lakshmipathi,
Thnks for the reply.Yes i am comparing (DWERK (at header level) and WERKS (at item level)) these two fields.
Any how we can give only one plant in Customer Master, we are not maintaining Customer/mtrl regard (Not required in our company scenario) and we have extended MMR to different plants.
So as per ur answer u went me to change only WERKS (at item level) while raising sales order for different plants.Is it enough?
Thnks&Rgds
NAG
Edited by: NAGA SUDHIR on Apr 3, 2009 6:46 AM

How to delete a line item from the sales order

Hi all,
how to delete a line item from the sales order for which the production is already happened and it has been delivered. the production order status is DLV.
Regards
Kumar

Hi
U can do this in two ways one u can short close the order by entering Reason for rejection in VA02 at header level and if yr order is multiple line item order u can enter the reason for rejection in any of the line item which u don't want to deliver.
This is called short close ( as the qty is not delivered fully).
Thx.

Limitation of line items in a sales order

Dear Guys,
Kindly confirm me whether I can make a single sales order with 500 line items or not ? Again if it no then how many line items can be taken in single sales order.
Thanks and regards,
Atul

dear atul
I think the correct reply would be 999,999 because data type of item number POSNR is NUM 6, which means that it can hold upto value 999,999.
However, at the same time keep the following into consideration:
1. FI document has a restriction of 999 line items per document. So, depending on the account settings, there will be a lower limit. E.g. if each Sales order line item results in 2 line items in the accounting document, then the max. no. of SO line items is limited to 499.
2. If FI summarization is active, then the system summarizes the account postings, thus reducing the no. of FI line items. Hence, a SO can accomodate more than 999 line items. However, this means that certain line item level details will not be available to the Finance guys (which they may not like).
3. As the number of line items in a Sales order increases, the system performance suffers greatly. There are performance fixes available, but in general, it is painful to load a SO with large no. of line times through BDC's. 10 Sales orders with 100 lines each consume less system resources than 1 Sales order with 1000 lines.
rewards if it helps
siva

Unconfirmed line items of a sales order into account in credit management

Hi Gurus
Updated the customer orders via prog. RVKRED09.
There is only one open order for this customer = 720662. My question is: in the credit master the sales value/credit exposure is USD 77.100,00. The order is for USD 105,900.00 .
Found out that line item 20 is not confirmed in the schedule lines. So the value in the sales value/credit exposure equals item 10 and 30. So my 1question is: Where is the setting that does not take unconfirmed line items of a sales order into account in credit management?
Thanks in advance
Regards
Nalini Iyer

Hi nalini
Even though , you create a sales order for that line item , but if that item is not confirmed then the value wont be considered. into credit exposure. .
But once it gets confirmed then the value will be taken into credit exposure..
Regards
Srinath

Route schedule not updated in some line item of a sales order

Hi Gurus,
All order are processed through the EDI interface automatically. Order
XXXXXXXXX for USA customer 40000XXXX is maintained in route reschedule
setup T-code VL52 on specific departure day thursday.
above are line item of same sales order, with same shipping point and route .
Why only some salesorder lines missing the route schedule ??
Please Help
Regards
Abhilash

When you post a query here, you need to have patience until some members go through your post. Please dont expect somebody should respond to you immediately as everybody has their own priorities.
Coming to your query, it could be due to many reasons as per the following note:-
Note 1750978 - Route Schedule does not populate on sales order
Go through the Resolutions given in the above note and check with your system
G. Lakshmipathi

Keep Quote line item numbers in Sales order

While creating a Sales order from Quote, SAP always creates line items with 100,200,300...and so on.
If quote has 3 line items say 100,110, & 120 and we create a sales order with reference to this quote in VA01. The sales order line items become 100,200 & 300.
The requirement is for Sales order to also have same line item numbers i.e. 100,110 & 120.
To retain quote line item numbers in Sales order the ABAP change will be in VOFM or user exit?

Hi,
It is not a straight forward thing. Adding data to table XVBAP won't work. It will create inconsistency. There are so many other tables involve here too, like, VBPA, VBUP, VBKD, KONV. There can be other tables too based on how your sales order is configured.
Also, modifying these tables (XTAB, YTAB ) in this user-exit may cause database inconsistency.
Regards,
RS

Complete Delivery at Line item level in Sales Order

Similar Messages

Maybe you are looking for