Blocked using 88.blocklist.zap

I have sent many times  mail to
[email protected] To request removal from this list,but they can't    don't have removal ,I don't why,Can you
help me,This is E-mail:[email protected] for me,THS!

Hi,
do you get an answer from Microsoft why they don't wan't to remove you from the list?
Try to check your mailserver against the following RBL check:
http://rbl-check.org/
Greetings
Christian
Christian Groebner MVP Forefront

Similar Messages

  • Blocked using Blocklist 1

    Dear support,
    One of our domain accounts was hacked and used to send out spam.
    This issue has been resolved days ago.
    We still get the following message when we try to send mail:
    You do not have permission to send to this recipient. For assistance, contact your system administrator.
    <baanmeubelen.nl #5.7.1 smtp;550 5.7.1 Service unavailable; Client host [82.161.66.211] blocked using Blocklist 1; To request removal from this list please forward this message to [email protected]>
    We followed the instructions more than a few times and got a response aswell (with case number).
    But it's been for days now and we're still being blocked.
    Is there anything we can do to get our IP 82.161.66.211 delisted from the Microsoft Blocklist?
    Thanks in advance.
    Kind regards,
    Paul.

    Hi Paul,
    First, please investigate and resolve any malicious activity, malware, or virus issues that could cause spam activity from the email address that is sending the email messages.
    Then, please contact FOPE Support to remove the sender's email address from the Blocked Sender list. This procedure is known as "delisting." Detailed steps as below:
    1.
    https://support.live.com/eform.aspx?productKey=mocpexforefront&ct=eformts&scrx=1&brand=mocp&brandtry=1
    2. Please choose "Delisting Requrest" under "what type of problem..." and they will address your issue fully. Thank you for your understanding.
    For no response from [email protected], we will contact our internal team to check this issue. Thank you for your reporting it.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Mails from Exchange 2013 to Exchange Online blocked using Blocklist 1

    Hello,
    1 week ago I've implemented a new Exchange 2013 at a company which used SBS 2011 before.
    But now its impossible to send a mail to a recipient on Exchange Online.
    Everytime we get a NDR with the following text:
    Service unavailable; Client host [xx.xx.xxx.xxx] blocked using Blocklist 1; To request removal from this list please forward this
    message to [email protected]
    If I run a SPAM-Blacklist Check on mxtoolbox.com I can see that the IP is on none blacklist.
    How can i determine why this IP is on the Exchange Online Blacklist? I'm sure that no spam was sent over this IP, the new infrastructure is 1 week old...
    Could there be an other reason ?

    Hello,
    According to the NDR information, this issue is caused by FOPE last update. So I recommend you contact FOPE support to delist.
    Please open the link:https://support.live.com/eform.aspx?productKey=mocpexforefront&ct=eformts&scrx=1&brand=mocp&brandtry=1 ,choose
    "Delisting Request" under "What type of problem you have".
    Cara Chen
    TechNet Community Support

  • Release sales order credit block using VA02

    Dear experts,
    By any chance can we release the sales order from credit block using VA02 instead of VKM3?
    I could see an example wherein the change log shows that the Overall Credit Status has been changed to Approved using VA02.
    Could you please assist me with all the available methods of releasing the sales order from credit block.
    KR,
    Tawsif Chogle

    Hi Tawsif,
    I dont thing that is possible, once you released the order from VKM3, it suppose to show VKM3.
    But if you say that your order shows in VA02 for credit release then might be somebody change the price in order, so the order price comes lower the credit limit and order got released.
    Hope it helps.
    Regards,
    MT

  • Payment Block using Transaction Code MIRO

    Hi Expert,
    Just want to seek your help regarding my issue in Payment block using tcode MIRO. When I enter an Incoming Invoice and post the Purchase Order thru "SIMULATE" button the payment block appeared is block "R" but when I post it directly ("SAVE" button) payment block appeared is block "D" which is the correct one. I've already change the user-exit in the program used but I end up to affect the other payment block. Can you please help me on this issue? Your help is very much appreaciated.
    Thanks so much.
    Regards,
    Anna

    Hi Nabheet,
    As per debugging MIRO upon clicking the SIMULATE button, the code that validates the blocking is in Call Function 'MRM_INVOICE_POST' inside user_exit_010. Kindly see codes below.
    For D block.
              IF l_block_set IS INITIAL.                        "LRD080701
                p_t_drseg-spgrq = 'X'.                          "DMO021302
                MODIFY p_t_drseg TRANSPORTING spgrq. "LRD080701 "DMO021302
              p_rbkpv-zlspr = 'A'.                            "JJK080602
                p_rbkpv-zlspr = 'D'.                            "JJK080602
                READ TABLE xaccit INDEX 1.                      "LRD022305
              IF xaccit-zlspr IS INITIAL.        "LRD022305   "MTS051905
                xaccit-zlspr = p_rbkpv-zlspr.                   "LRD022305
                MODIFY xaccit INDEX 1.                          "LRD022305
              ENDIF.                                          "MTS051905
              ENDIF.                                            "LRD080701
    Thanks so much for your response.
    Regards,
    -Anna

  • How to reduce the number of data blocks used by table

    Hi,
    I was trying to reduce the space usage of a particular table of my apex application which stores blob content and therefore deleted many records from it.
    However, the data block usage remained the same as before.
    I have tried to 'analyze' the table and validate the structure,but am unable to overcome this problem.
    Could someone throw some light on what needs to be to reduce the number of data blocks used by this table?
    Best Regards,
    Priya Jetley

    Priya:
    It is likely that the BLOB content defined in your table is being stored 'Out-of-Line'. This means that the LOB columns are stored in segments of their own. These then are the segments that may need shrinking.
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14249/adlob_tables.htm#i1006363
    Varad

  • Blocked using FBLW15

    Good morning,
    we have a problem with sending emails from domain @macauditor.pl to domains which are hosted on Outlook.com or protected by Microsoft Forefront. Problem occurred after we changed IP address of our mail server. We have set MX, revDNS and SPF records correctly,
    but still are getting the following NDR:
    "550 5.7.1 Service unavailable; Client host [217.67.215.242] blocked using FBLW15; To request removal from this list To request removal from this list please forward this message to [email protected]".
    I have sent email to "[email protected]" but didn't get any response other than this:
    "Thank you for your delisting request SRX1244578730ID. Your ticket was received on (Apr 28 2014 11:11 AM UTC) and will be responded to within 24 hours."
    It has been nearly 2 days since our first request and we are still unable to send emails to domains: @bbdo.com.pl, @mediadirection.com.pl, @ideatfi.pl, @inventumtfi.pl. Those domains belong to our important clients, so this is a huge problem for us.
    We have already checked our IP at http://www.anti-abuse.org/ and it seems that we are 'clean' everywhere. Only MS is blocking our emails.
    Kind Regards,
    Paweł Gąsieniec

    Well, this is quite unexpected, and pleasing! :
    I received a response about 4 hours after my request to delist@ms :
    "Hello 
    Thank you for contacting Microsoft Online Services Technical Support.  This email is in reference to ticket number [xxx], which was opened in regards to your delisting request for [IP .x.x.x.x
    The IP address you submitted has been reviewed and removed from our block lists.  Please note that there may be a 1-2 hour delay before this change propagates through our entire system.
    We apologize for any inconvenience this may have caused you.  As long as our spam filtering systems do not mark a majority of email from the IP address as spam-like, your messages will be allowed to flow as normal through our network.  However, should
    we detect an increase in spam-like activity, the IP address may be re-added to our block list.
    Should you have any further questions or concerns, please feel free to respond to this email.
    Thank you again for contacting Microsoft Online Services technical support and giving us the opportunity to serve you."
    Thanks MS ;-)

  • Construct a Sql block using With Clause to improve the performance

    I have got four diff parametrized cursor in my Pl/Sql Procedure. As the performance of the Procedure is very pathetic,so i have been asked to tune the Select statements used in those cursors.
    So I am trying to use the With Clause in order to club all those four Select Statements.
    I would appreciate if anybody can help me to construct the Sql Block using With Clause.
    My DB version is..
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    PL/SQL Release 11.1.0.7.0 - Production
    Four Diff cursors are defined below.
    CURSOR all_iss (
          b_batch_end_date   IN   TIMESTAMP,
       IS
          SELECT isb.*
                FROM IMPLMN_STEP_BREKPN  isb
               , ISSUE iss
          WHERE isb.issue_id = iss.issue_id
           AND iss.issue_status_id  =  50738
           AND ewo_no IN
          (SELECT TO_CHAR(wo_no)
            FROM MGO_PLANT_AUDIT
           WHERE dml_status = 'U' OR dml_status = 'I')
          UNION ALL
          SELECT isb.*
           FROM IMPLMN_STEP_BREKPN  isb
            , ISSUE iss
           WHERE isb.issue_id = iss.issue_id
           AND iss.issue_status_id  =  50738
           AND CAST (isb.last_updt_timstm AS TIMESTAMP) >=
                                                                  b_batch_end_date;
          CURSOR ewo_plant  ( p_ewo_no IN  IMPLMN_STEP_BREKPN.ewo_no%TYPE)
          IS
          SELECT DISTINCT wo_no ,
          plant_code
          FROM MGO_PLANT
          WHERE TO_CHAR(wo_no) = p_ewo_no;
          CURSOR iss_ewo_plnt (
          p_issue_id IN IMPLMN_STEP_BREKPN.issue_id%TYPE ,
          p_ewo_no IN IMPLMN_STEP_BREKPN.EWO_NO%TYPE,
          p_plnt_code IN IMPLMN_STEP_BREKPN.PLT_FACLTY_ID%TYPE)
          IS
          SELECT *
          FROM IMPLMN_STEP_BREKPN
          WHERE issue_id = p_issue_id
          AND ewo_no = p_ewo_no
          AND
          (plt_faclty_id = p_plnt_code
          OR
          plt_faclty_id IS NULL);
          CURSOR iss_ewo_plnt_count (
          p_issue_id IN IMPLMN_STEP_BREKPN.issue_id%TYPE ,
          p_ewo_no IN IMPLMN_STEP_BREKPN.EWO_NO%TYPE,
          p_plnt_code IN IMPLMN_STEP_BREKPN.PLT_FACLTY_ID%TYPE)
          IS
          SELECT COUNT(*)
          FROM IMPLMN_STEP_BREKPN
          WHERE issue_id = p_issue_id
          AND ewo_no = p_ewo_no
          AND
          (plt_faclty_id = p_plnt_code
          OR
          plt_faclty_id IS NULL);

    Not tested. Some thing like below. i just made the queries as tables and given name as a,b,c and substituted columns for the parameters used in the 2nd cursor and third cursor. Try like this.
    CURSOR all_iss (
    b_batch_end_date IN TIMESTAMP,
    IS
    select a.*,b.*,c.* from
    ( SELECT isb.*
    FROM IMPLMN_STEP_BREKPN isb
    , ISSUE iss
    WHERE isb.issue_id = iss.issue_id
    AND iss.issue_status_id = 50738
    AND ewo_no IN
    (SELECT TO_CHAR(wo_no)
    FROM MGO_PLANT_AUDIT
    WHERE dml_status = 'U' OR dml_status = 'I')
    UNION ALL
    SELECT isb.*
    FROM IMPLMN_STEP_BREKPN isb
    , ISSUE iss
    WHERE isb.issue_id = iss.issue_id
    AND iss.issue_status_id = 50738
    AND CAST (isb.last_updt_timstm AS TIMESTAMP) >=
    b_batch_end_date) a,
    ( SELECT DISTINCT wo_no ,
    plant_code
    FROM MGO_PLANT
    WHERE TO_CHAR(wo_no) = p_ewo_no) b,
    ( SELECT *
    FROM IMPLMN_STEP_BREKPN
    WHERE issue_id = p_issue_id
    AND ewo_no = p_ewo_no
    plt_faclty_id IS NULL) c
    where b.wo_no = c.ewo_no and
    c.issue_id = a.issue_id ;
    vinodh
    Edited by: Vinodh2 on Jul 11, 2010 12:03 PM

  • Executing a PL/SQL block (using Toplink)

    I have a scenario where I need to execute some fairly complex PL/SQL blocks. As a tester, I am attempting to execute the following simple block:
    declare val NUMBER := 1; begin val := 2; end;
    Both wrapping this in an SQLCall, or a DataReadQuery give the following exception. What is the best way to execute a PL/SQL block using Toplink?
    Local Exception Stack:
    Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
    Internal Exception: java.sql.SQLException: ORA-00900: invalid SQL statement
    Error Code: 900
    Call: declare val NUMBER := 1; begin val := 2; end;
    Query:DataReadQuery()
         at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:290)
         at oracle.toplink.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:570)
         at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:442)
         at oracle.toplink.threetier.ServerSession.executeCall(ServerSession.java:453)
         at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:117)
         at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:103)
         at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:174)
         at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeSelect(DatasourceCallQueryMechanism.java:156)
         at oracle.toplink.queryframework.DataReadQuery.executeNonCursor(DataReadQuery.java:118)
         at oracle.toplink.queryframework.DataReadQuery.executeDatabaseQuery(DataReadQuery.java:110)
         at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:603)
         at oracle.toplink.queryframework.DataReadQuery.execute(DataReadQuery.java:96)
         at oracle.toplink.publicinterface.Session.internalExecuteQuery(Session.java:2062)
         at oracle.toplink.publicinterface.Session.executeQuery(Session.java:981)
         at oracle.toplink.publicinterface.Session.executeQuery(Session.java:938)

    Could you try the following:
            Session s = ...
            DataModifyQuery dmq = new DataModifyQuery();
            SQLCall sqlCall = new SQLCall();
            sqlCall.setQueryString(
                "declare\n" +
                "  val NUMBER := 1;\n" +
                "begin\n" +
                "  val := 2;\n" +
                "end;");
            sqlCall.setQuery(dmq);
            dmq.setCall(sqlCall);
            s.executeQuery(dmq);

  • I have a ransomware virus on chrome browser that blocks use of browser  How do I remove this virus.  I scan with norton and shows no virus

    I have a ransomware virus on chrome browser the blocks use of browser  How do I disable virus?

    It's likely the "FBI Moneypak browser hijack" which works by hijacking Javascript in the web browser so you can't escapte.
    What you do is press command tab to get to the Finder, then from the Apple Menu select > Force Quit on Chrome.
    Apple menu > System Preferences > General >
    Uncheck “Restore windows when quitting and re-opening apps“
    Apple Menu select > Shutdown, restart and don't start up Chrome.
    Use Safari to find out how to disable loading of previous web pages in Chrome ( I don't use it )
    Once Chrome loads, then Reset it's caches etc.
    If you know the domain name of the malicious site, then feed it here
    https://www.google.com/safebrowsing/report_badware/

  • Updating delivery block using 'BAPI_SALESDOCUMENT_CHANGE'

    Hi!
    I need to update the delivery block field of a sales order.
    I am using  'BAPI_SALESDOCUMENT_CHANGE' and passing
    delivery block also.
      ls_order_header_in-dlv_block = lp_lifsk.
      ls_order_header_inx-dlv_block = lp_lifsk.
    Could you please let me know how to achieve it.
    Thanks.
    -Shreyas
    PS: Helpful answers will be rewarded.

    Hi
    please check the following code ..hope it will help you
    LOOP AT l_i_headr ASSIGNING <l_fs_headr>.
        l_wa_order_in-dlv_block = space(the desired value which u want to update).
        l_wa_header_inx-updateflag = l_c_update.
        l_wa_header_inx-dlv_block = l_c_set.
        CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
          EXPORTING
            salesdocument    = <l_fs_headr>-vbeln
            order_header_in  = l_wa_order_in
            order_header_inx = l_wa_header_inx
          TABLES
            return           = l_i_return.
    Check for abort messages and error messages
        LOOP AT l_i_return TRANSPORTING NO FIELDS WHERE type EQ l_c_abort OR
                                                        type EQ l_c_error.
    Set the flag to indicate that there is an error.
          l_v_error_flg = l_c_set.
        ENDLOOP.
    *Commit the changes in the database only if there are no errors
        IF l_v_error_flg IS  INITIAL.
    *UPDATE the delivery block to space
    Commit work
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              wait = space.
        ELSE.
    Roll back the changes if there are errors.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
        ENDIF.
      ENDLOOP.

  • Error in the pl/sql block using associative arrays

    Hi
    I tried the following block of code using associative arrays.
    DECLARE
       TYPE NumTab IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
       CURSOR c1 IS SELECT empno FROM emp;
       empnos NumTab;
       rows   NATURAL := 10;
    BEGIN
       OPEN c1;
       FOR i in empnos.first..empnos.last LOOP
          /* The following statement fetches 10 rows (or less). */
          FETCH c1 BULK COLLECT INTO empnos LIMIT rows;
          EXIT WHEN c1%NOTFOUND;
          DBMS_OUTPUT.PUT_LINE ( empnos.next(i));
       END LOOP;
       CLOSE c1;
    END;and the error is
    DECLARE
    ERROR at line 1:
    ORA-06502: PL/SQL: numeric or value error
    ORA-06512: at line 8could you please let me know where i'm wrong
    and please guide me where we use these associative arrays.
    Thanks

    Something like this. Do minor modification in your code.
    DECLARE
       TYPE NumTab IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
       CURSOR c1 IS SELECT empno FROM emp;
       empnos NumTab;
       rows   NATURAL := 5;
    BEGIN
       OPEN c1;
       LOOP  
        /* The following statement fetches 5 rows (or less). */
          FETCH c1 BULK COLLECT INTO empnos LIMIT rows;
          EXIT WHEN c1%NOTFOUND;
          DBMS_OUTPUT.PUT_LINE ( empnos.count);
       END LOOP;
       CLOSE c1;
    END;
    /

  • Getting value with an anonymous block using ODP

    Hi all!
    I have a problem I hope someone can help me with. I believe it to be a minor one. I am trying to imbed an anonymous block into my .net app and use it dynamically to get a value from the database depending on the values in a tables. Since my procedure is quite large I am displaying a small example proc for simplicity purposes. Basically I want to execute an anonymous block from my app that will return a value (not a row or rows) from the database. The code is below:
    Private Sub test()
    Dim cn As New OracleConnection(profileString)
    Try
    Dim sb As New System.Text.StringBuilder
    sb.Append("Declare ")
    sb.Append("v_maxnum varchar2(6); ")
    sb.Append("Begin ")
    sb.Append("Select max(to_number(email_address_id)) into ")
    sb.Append("v_maxnum from CVWH14_CDRV_TEST.EMAIL_ADDRESS_TBL; ")
    sb.Append("dbms_output.put_line(v_maxnum); ")
    sb.Append("Exception ")
    sb.Append("When Others ")
    sb.Append("Then ")
    sb.Append("dbms_output.put_line('Program run errors have occurred.'); ")
    sb.Append("End; ")
    Dim cmd As New OracleCommand(sb.ToString, cn)
    With cmd
    cmd.CommandType = CommandType.Text
    Dim parm As New OracleParameter
    parm.ParameterName = "v_maxnum"
    parm.OracleType = OracleType.VarChar
    parm.Direction = ParameterDirection.Output
    parm.Size = 6
    cmd.Connection.Open()
    Dim ret As Object = cmd.ExecuteScalar()
    Dim res As String = cmd.Parameters.Item(0).Value.ToString -- **Error is occuring here**
    cmd.Connection.Close()
    cmd.Dispose()
    End With
    Catch ex As Exception
    MessageBox.Show(ex.Message, "Error")
    'End If
    If cn.State = ConnectionState.Open Then
    cn.Close()
    End If
    End Try
    End Sub
    The exception error reads "Invalid Index 0 for this OracleParameterCollection with Count=0."
    If I can figure out how to get a parameter value from the database via the anonymous block, I can apply the logic to the real application. Any help or direction I could receive would be greatly appreciated. Thanks for reading this post!

    Thank you for responding. The code that I posted was just one of many ways I have tried. I retried the proc making just 2 changes:
    Private Sub test()
    Dim cn As New OracleConnection(profileString)
    Try
    Dim sb As New System.Text.StringBuilder
    sb.Append("Declare ")
    sb.Append("v_maxnum varchar2(6); ")
    sb.Append("Begin ")
    sb.Append("Select max(to_number(email_address_id)) into ")
    sb.Append("v_maxnum from CVWH14_CDRV_TEST.EMAIL_ADDRESS_TBL; ")
    sb.Append("dbms_output.put_line(:v_maxnum); ") -- !Changed this to a bind variable!
    sb.Append("Exception ")
    sb.Append("When Others ")
    sb.Append("Then ")
    sb.Append("dbms_output.put_line('Program run errors have occurred.'); ")
    sb.Append("End; ")
    Dim cmd As New OracleCommand(sb.ToString, cn)
    With cmd
    cmd.CommandType = CommandType.Text
    Dim parm As New OracleParameter
    parm.ParameterName = ":v_maxnum" -- !Changed this to a bind variable!
    parm.OracleType = OracleType.VarChar
    parm.Direction = ParameterDirection.Output
    parm.Size = 6
    cmd.Connection.Open()
    Dim ret As Object = cmd.ExecuteScalar() -- !The error is now occuring here!
    Dim res As String = cmd.Parameters.Item(0).Value.ToString
    cmd.Connection.Close()
    cmd.Dispose()
    End With
    Catch ex As Exception
    MessageBox.Show(ex.Message, "Error")
    If cn.State = ConnectionState.Open Then
    cn.Close()
    End If
    End Try
    End Sub
    I am now getting the error message "Not all variables bound". Any more help or direction that you could throw my way would be greatly appreciated.

  • Append signature block using signtool

    I successfully signed using signtool.exe which is part of Windows sdk.
    signtool sign /fd sha256 /a /f lost.pfx <filename>
    I am able to see the file name signed however I attempted the /ac option of signtool which adds additional entries to signature block. So I used following syntax however resulted in error:
    signtool sign /fd sha256 /a /ac lots1.pfx <filename>. Is this a proper usage? If not what would be the proper usage of this switch.
    Additional question is the file being signed as a typical PE format file, so I am not sure signing twice with different certificate is allowed? Thanks,

    Thanks this syntax works. But looks like more work ahead of me. The signing completed successfully however its certificate area still contain one certificate. Comparing the certificate only the one specified with the /f was there. 
    Also when verifying the signed file with verify /ph switch, threw out this error:
    Signtool error: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider. 
    FILE is not stamped
    Number of files successfully verified: 0
    number of warnings: 0
    number of errors 1:
    Still looking what is the issue here. However I still see this error when signing without additional file (/ac) so this error does not seem to be specific to /ac switch. It just appears, there is still one certificate in the file after signing. 

  • HT1904 block using credit card

    I don't want to use my credit card how do I block that information out from this user using my card ?

    Usually, where there are discounts on offer from Apple, a credit option from Apple would not be available.   As with many businesses, it is usually one or the other.   Go to Apple on line  http://store.apple.com/us  and click on the flag, bottom right, select your national flag, then read about the current offers there.   As I mentioned, you can use your Credit card, subject it is acceptable, and usually repay monthly in part or the whole.
    Thank you for the star.

Maybe you are looking for