Blocking ads and pop ups

Have the newer version of the WSA give us the option not to display an message when an ad or pop up is blocked?
I have asked about this before and I thought that is was in the blueprints for a future release I just wanted to see if is has been done.
I get a lot of complaints that websites are being blocked and really its just ads and pop ups.Other url filters that I have used in the past for ads and pop ups dont display this ad or pop up has been blocked message.
Thanks

Just FYI ... we currently acheive this by using a custom (redirected from ironport) block page for all of our block messages. We then design this .asp block page to display differently depending on what fields are passed to it in the URL. If the category=Advertisements, then the block page appears as a simple white page with the text "This advertisement has been intentionally blocked ... "
This also allows us to design custom 504, 503 pages etc, as well as different block pages depending on the user's IP address range.
Can you share with us how you did this, I am new to the IronPort and have some .asp experience. I would like to know how to blank out the ad pages and have a message come up for the other blocked pages. Thanks!

Similar Messages

  • How do i get ads and pop ups off my computer?

    Mac Book Pro
    Processor 2.66 GHz Intel Core 2 Duo
    Version 10.0.1
    How do I get ads and pop ups off my computer?

    Your question is one that tends to bring out the worst of all the bad advice that infests this site. There is, in fact, no need to download anything to solve the problem.
    You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
    Back up all data before making any changes.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
    Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • Can ads and pop ups be shut off on I pad on downloaded games?

    Can ads and pop ups be shut off on game apps?

    Chris is saying it but without saying it ....
    Yes you can turn them off. Buy the full version of the game. As long as you use the free versions there is no way to turn off the ads. That's how the developer generates revenue for his or work - if you don't want to buy the paid version of the game he has to get paid somehow.

  • Why am I constantly being re-linked to ads and pop ups

    I have only had my Macbook Pro a week, and I cannot go onto safari without constantly being re-directed to advertising pages and pop ups appearing on sites that would never have them. I have compared all my settings to my girlfriends Macbook Pro with no differences that we can see. Even when I checked the T's and C's box to agree to the apple support community it opened up 2 other tabs to advertisement websites. Can anyone help me out as I am new to mac and its really annoying me after only having it for one week. I have downloaded adobe flash player and Utorrent but did not download any torrents as of yet. I have tried ClamXav and the scans come back with no results.
    Any help will be gratefully appreciated.

    You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • How to stop endless ads and pop-ups

    I can't use Safari without constantly being rerouted to an ad or being interrupted by a pop-up.  I didn't use to be like this.  How do I stop it?

    Alternatively check this: Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
    And, since you're a teacher, educate yourself by reading this: How to install adware

  • Safari ads and pop ups

    ever since i tried to download something from utorrent something happened to safari. Ads pop up in pages where they use to not be any and whenever i click on a link it takes me to a website which advertises things. What should i do?

    Here is the infomation from etresoft.com
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
              OS X 10.9.2 (13C1021) - Uptime: 0 days 0:44:48
    Disk Information:
              Hitachi HTS545032B9A302 disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 319.21 GB (137.31 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Computer, Inc. IR Receiver
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Gatekeeper:
              Mac App Store and identified developers
    Kernel Extensions:
              [not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) Support
              [not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) Support
              [not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) Support
              [not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) Support
              [not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
              [not loaded] com.novatelwireless.driver.3G (3.0.13) Support
              [not loaded] com.novatelwireless.driver.3GData (3.0.13) Support
              [not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.13) Support
              [not loaded] com.option.driver.Option72 (2.15.0) Support
              [not loaded] com.option.driver.OptionHS (3.26.0) Support
              [not loaded] com.option.driver.OptionMSD (1.21.0) Support
              [not loaded] com.option.driver.OptionQC (1.11.0) Support
              [kext loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
              [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
              [not loaded] com.roxio.TDIXController (1.7) Support
              [not loaded] com.vodafone.driver (3.0.9) Support
              [not loaded] com.vodafone.driver.Data (3.0.9) Support
              [not loaded] com.wdc.driver.1394HP (1.0.9) Support
              [not loaded] com.wdc.driver.USBHP (1.0.11) Support
              [not loaded] com.zte.driver.cdc_ecm_qmi (1.0.1) Support
              [not loaded] com.zte.driver.cdc_usb_bus (1.0.1) Support
              [not loaded] de.novamedia.driver.NMSamsung (0.0.2) Support
              [not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
              [not loaded] de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
              [not loaded] de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
              [not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
              [not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
              [not loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
              [loaded] com.genieoinnovation.macextension.client.plist Support
              [loaded] com.microsoft.office.licensing.helper.plist Support
              [loaded] com.oracle.java.Helper-Tool.plist Support
              [loaded] com.oracle.java.JavaUpdateHelper.plist Support
              [not loaded] com.teamviewer.teamviewer_service.plist Support
              [not loaded] com.vsearch.daemon.plist Support
              [running] com.vsearch.helper.plist Support
              [running] com.zeobit.MacKeeper.AntiVirus.plist Support
              [failed] org.glimmerblocker.proxy.plist Support
    Launch Agents:
              [running] com.epson.epw.agent.plist Support
              [running] com.genieoinnovation.macextension.plist Support
              [loaded] com.oracle.java.Java-Updater.plist Support
              [not loaded] com.teamviewer.teamviewer.plist Support
              [not loaded] com.teamviewer.teamviewer_desktop.plist Support
              [running] com.vsearch.agent.plist Support
              [running] de.novamedia.VodafoneDeviceObserver.plist Support
              [loaded] org.glimmerblocker.updater.plist Support
    User Launch Agents:
              [loaded] com.divx.agent.postinstall.plist Support
              [loaded] com.facebook.videochat.[redacted].plist Support
              [loaded] com.google.keystone.agent.plist Support
              [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
              [running] com.spotify.webhelper.plist Support
              [running] com.zeobit.MacKeeper.Helper.plist Support
    User Login Items:
              Spotify
              Genieo
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
              OVSHelper: Version: 1.1 Support
              DivXBrowserPlugin: Version: 2.2 Support
              Default Browser: Version: 537 - SDK 10.9
              SharePointBrowserPlugin: Version: 14.0.0 Support
              Unity Web Player: Version: UnityPlayer version 3.4.1f5 - SDK 10.5 Support
              Silverlight: Version: 4.0.60531.0 Support
              JavaAppletPlugin: Version: Java 7 Update 55 Check version
    Safari Extensions:
              GoPhoto.it V9.0: Version: 1.222
              AdBlock: Version: 2.6.30
              DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              Picasa: Version: 1.0 Support
    3rd Party Preference Panes:
              DivX  Support
              Flash Player  Support
              Java  Support
    Time Machine:
              Skip System Files: NO
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 297.29 GB Disk used: 169.41 GB
              Destinations:
                        My Passport [Local] (Last used)
                        Total size: 0 B
                        Total number of backups: (null)
                        Size of backup disk: Too small
                                  Backup size 0 B < (Disk used 169.41 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   9%          WindowServer
                   5%          com.apple.WebKit.WebContent
                   4%          Safari
                   2%          hidd
                   1%          PluginProcess
    Top Processes by Memory:
              319 MB          com.apple.WebKit.WebContent
              213 MB          Safari
              209 MB          AntiVirus
              143 MB          com.apple.IconServicesAgent
              102 MB          Spotify
    Virtual Memory Information:
              195 MB          Free RAM
              1.65 GB          Active RAM
              1.25 GB          Inactive RAM
              928 MB          Wired RAM
              414 MB          Page-ins
              0 B          Page-outs

  • Ads and pop ups

    Every time I click on something in safari a new tab opens with an advert, there are also little adverts popping up on the safari page.

    There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware.
    Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination  command-C:
    /Library/LaunchDaemons
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "LaunchDaemons" may open. Look inside it for a file with a name of the form
              com.something.daemon.plist
    Here something is a variable word, which can be different in each case. It could be "cloud," "dot," "highway," "submarine," "trusteddownloads," or pretty much anything else.
    There may also be a file named
               com.something.helper.plist
    in the same folder.
    If you find files with names that fit the above description, post what you have for "something."

  • Vimperator and pop-ups

    Okay, so I'm 99% mouse-free in Firefox except for the occasional pop-up that gets past the browser pop-up blocker. These pop-ups aren't new browser windows, but rather some kind of javascript 'window' floating above the focused browser window.
    My question: how do you change focus to these pop-ups using either Vimperator or browser keyboard commands? Alt-tab doesn't work as they aren't real windows, and commands like Vimperator's ]f for focus-next-frame don't get me anywhere either. Help!
    Bob

    Procyon wrote:You don't actually want those, right? Try adblock and noscript.
    Heck no, I definitely don't want them. I just want to be able to transfer focus to the pop-up so that I can close it. I am running adblock, but every once in a while one will slip by. And while noscript would likely prevent them, it seems a bit of a severe remedy as they happen so seldom.
    A way to change focus to them just long enough to kill them would be the preferred method. There's probably an obvious way I'm just overlooking
    Bob

  • Block ads and mackeeper ads

    How do I block Mackeeper adverts and random pop up adverts from popping up every time  I click on a new tab another ad pops up, and it is getting very annoying. I've tried clicking Safari>security and block ads, and deselected plug ins but they still come up.

    There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
    If you have trouble following those instructions, see below.
    Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
    The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
    Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination  command-C:
    /Library/LaunchDaemons
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
              com.something.daemon.plist
    and
               com.something.helper.plist
    Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
    If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
    /Library/LaunchAgents
    In this folder, there may be a file named
              com.something.agent.plist
    where the string something is the same as before.
    If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
    Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
    The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
    Open this folder:
    /Library/Application Support
    If it has a subfolder named just
               something
    where something is the same string you saw before, drag that subfolder to the Trash and close the window.
    Don't delete the "Application Support" folder or anything else inside it.
    Finally, in this folder:
    /System/Library/Frameworks
    there may an item named exactly
                v.framework
    It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
    Don't delete the "Frameworks" folder or anything else inside it.
    If you didn't find the files or you're not sure about the identification, post what you found.
    If in doubt, or if you have no backups, change nothing at all.
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

    Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

    You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • What antivirus protection should I purchase for my MacBook Pro? MacSecurity.app appeared on my desktop, and I downloaded that. Since then, it has said my computer is infected and pop-ups have been appearing.

    What antivirus protection should I purchase for my MacBook Pro? MacSecurity.app appeared on my desktop, and I downloaded that. Since then, it has said my computer is infected and pop-ups have been appearing.

    You've been infected by a scam trojan.  You don't need any anti-virus software on your Mac.  See the following about getting rid of the trojan.
    Trojan War
    If you discover a trojan program is running on your computer then look to the following information for assistance:
    1. A recent discussion on the Apple Support Communities: MacDefender Trojan.
    2. An excellent site devoted to Mac Malware: Macintosh Virus Guide
    3. Another site for removing MacDefende, et.al.: MAC Defender Rogue Anti-Virus analysis and Removal
    4. A new removal utility - MacDefenderKiller
    Removing strange software can be a task.  The following outlines various ways of uninstalling software:
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash.  Applications may create preference files that are stored in the /Home/Library/Preferences/ folder.  Although they do nothing once you delete the associated application, they do take up some disk space.  If you want you can look for them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application.  In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder.  You can also check there to see if the application has created a folder.  You can also delete the folder that's in the Applications Support folder.  Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a Startup item or a Log In item.  Startup items are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder.  Log In Items are set in the Accounts preferences.  Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab.  Locate the item in the list for the application you want to remove and click on the Delete [-] button to delete it from the list.
    Some software use startup daemons or agents that are a new feature of the OS.  Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.  Unfortunately Spotlight will not look in certain folders by default.  You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead.  Download Easy Find at VersionTracker or MacUpdate.
    Some applications install a receipt in the /Library/Receipts/ folder.  Usually with the same name as the program or the developer.  The item generally has a ".pkg" extension.  Be sure you also delete this item as some programs use it to determine if it's already installed.
    There are many utilities that can uninstall applications.  Note that you must have this software installed before you install software you may need to uninstall.  Uninstallers won't work if you install them after the fact.  Here is a selection:
    AppZapper
    Automaton
    Hazel
    CleanApp
    Yank
    SuperPop
    Uninstaller
    Spring Cleaning
    Look for them and others at VersionTracker or MacUpdate.
    For more information visit The XLab FAQs and read the FAQs on removing software and dealing with spyware and malware.
    After removing all the components of the software you may have to restart the computer to fully disable the software.  This will be the case when removing software that has installed a daemon.  After the daemon has been removed you need to restart the computer to stop the daemon.  Alternatively, you can kill the daemon process using the Terminal application or Activity Monitor.

  • Querying/setting "Print notes and pop-ups" application preference

    Hi
    I'd like to be able to alert the user if a particular setting is disabled within a plugin application I've written for Acrobat 9 Pro. The particular preference in question is the "Print notes and pop-ups" setting in the Comments preferences page.
    I've tried querying the value using AVAppGetPreference(avpPrintAnnots), but it seems that the particular constant I pass doesn't refer to what I assumed it does. Is there another I should be using instead? I'd have tried using the AVAppGetPrefBool or similar function, except it requires a key parameter containing a value that doesn't appear to be documented anywhere.
    Failing to access the preference store via the API, I eventually found that the value for the setting I'm after is stored in the windows registry at HKLM\Software\Adobe\Adobe Acrobat\9.0\Annots\cPrefs\bprintCommentPopups, however setting this value in a AVAppDidInitialize callback function is already too late the application to read the new value I've set, and I couldn't find a more suitable callback; not that I was able to find a complete list of these in any of the documentation.
    Regards, Andrew

    Please forgive me for pushing the matter, but given the absence of documentation on this matter, I really have no other option.
    Inserting #define avpPrintCommentPopups (Str("printCommentPopups")) into my source file didn't work either, the Str macro is also undefined. Besides this point, why exactly should the define have worked? The AVAppGetPreference function/macro takes an enum value as an argument, not a string.
    If you are able to supply me with the relevant section and key names for the AVAppGetPrefBool function I would be happy to use this function instead.

  • I have enabled pop-blocker but still pop-ups are getting opened.

    Hi Team,
    I have enabled pop-blocker but still pop-ups are getting opened.
    New browser gets opened automatically in various windows.
    Can you please help me?
    Regards,
    Hitesh

    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
    *https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

  • Block app ad pop ups

    How can I stop Safari pop up ads for my iPad air? Pop ups are for apps and it redirects me to various app stores. My Safari block pop ups is already activated; have reset my iPad numerous times; cleared cookies and data; cookies blocked from third party advertisers and it still no help.

    If you're getting ads while browsing sites that should not contain ads, that's going to be a network problem of some kind.
    More likely, though, you're getting ads that are normal for the sites you're visiting, in which case you should take this as a sign that those sites are crap and should be avoided. Alternately, if you're getting pop-up ads in certain apps, you just need to either buy the full, ad-free version of that app or quit using the app.

  • Images and Pop-Ups Will Not Open in IE???

    I have several .html pages being displayed within an i-Frame.
    There are thumbnail images on .html pages that are being displayed
    within the i-frames, and these thumbnails are not displaying in IE,
    even though they do display in Firefox. The thumbails are linked
    through JavaScript code (written by Dreamweaver 8) to open up .html
    pages. Some of these thumbnails are displaying (even though some do
    not and all use the same code), though the links to the pop-ups are
    not working.
    Everything works fine in FireFox, this is only a problem in
    IE. I am using version 7 of IE.
    Does anyone have ANY ideas why this may not be working????
    Thanks for any assistance!!!!

    IE7 has popup blocking turned on by default. You may need to
    alter the
    settings
    Paul Whitham
    Certified Dreamweaver MX2004 Professional
    Adobe Community Expert - Dreamweaver
    Valleybiz Internet Design
    www.valleybiz.net
    "jjhtwin2" <[email protected]> wrote in
    message
    news:ep8l97$5ea$[email protected]..
    >I have several .html pages being displayed within an
    i-Frame. There are
    > thumbnail images on .html pages that are being displayed
    within the
    > i-frames,
    > and these thumbnails are not displaying in IE, even
    though they do display
    > in
    > Firefox. The thumbails are linked through JavaScript
    code (written by
    > Dreamweaver 8) to open up .html pages. Some of these
    thumbnails are
    > displaying
    > (even though some do not and all use the same code),
    though the links to
    > the
    > pop-ups are not working.
    >
    > Everything works fine in FireFox, this is only a problem
    in IE. I am using
    > version 7 of IE.
    >
    > Does anyone have ANY ideas why this may not be
    working????
    >
    > Thanks for any assistance!!!!
    >

Maybe you are looking for

  • Photos app not working with photoshop.

    Photos app not allowing me to add photos to photoshop.  Anyone else have this problem?  I can add photos from my home screen but not directly from photos app.  iPhoto allowed me to drag and drop them into photoshop but not the new photos app.  Any su

  • Why does the highlighting/underlining feature only select parts of words?

    Is there a reason why in certain PDF's I can only select parts of words? Before in the same document I was able to select, underline, highlight, etc., with no problem. Has there been an update or change to the software that causes this to happen? Can

  • Best way to handle an event from WaitForSingleObject

    Hello LV experts, I would like to know what's the best way to handle an event which I catch using the Win32 API (WaitForSingleObject) in Labview(7.1 or 8.20). I know there is too many possibilities to do this, but I want to do it  on the best way. th

  • Starting Workflow from VA02/03 Problem

    Hi, I have a problem, I want to start the workflow in VA03 Transaction, from menu "Service Object"==>" Workflow"==>"Start Workflow", but I can't see the workflow I want to start, the window is empty, this does not happen in our Quality an Production

  • HT3702 Itunes charged for free app download (Update).

    Itunes charged for free app download (Update). No clue why this happened. Can anyone tell me what could be the problem?