Blocking incoming calls that are not in my phone b...

i recently tried blocking incoming calls that are not in my phone book and the result was that my pin code has been blocked. does any one have an idea of how i should go about it?
Obria

That depends which phone he/she is using... this is in the phones section, not the smartphones, so I had assumed that software such as that would not be appropriate lol
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Similar Messages

  • I am recieving calls from a solicitor. Show up as no caller Id. I want to block all calls that do not show caller Id. Can I do that? I am on the do not call list

    How do I block all in coming calls that do not show on my caller Id. Phone says "no caller id" This particular call is from a place selling septic tank cleaner. They leave an automated voice mail. They are calling me over and over. I am on the national do not call list but that's no help. Because the caller id doesn't show anything I can't even report them.
    I remember in the past calling a number and before my call would go thru I would have to enter my phone number so the party I was calling knew who was calling them. That is what I want to do. I want to block all calls from "no caller id" "number unavailable" Just FYI my phone is an IPHONE 5 and I am on Verizon.
    Any help would be appreciated.
    Thanks

        itbitybob, good day!
    Thank you for taking the time to reach out to us today. I know how frustrating it can be getting phone calls from "no caller id" numbers. We do have an option that is called Family Base that will allow you to block unknown numbers, private numbers, or caller id. This link will provide you with the full details of this option. http://vz.to/1gIklla I hope this is able to answer your question. If you have further questions please feel free to reach back out to us at any time.
    KevinR_VZW
    Please follow us on Twitter @VZWSupport 

  • Facetime phantom calls and calls that are not from who they say they are

    My wife has an iPhone 4 and twice in the last week Facetime calls that say they are coming from her mother have been originated by someone other than her mother. The second time this happened the stranger made an obscene gesture. Since Apple is routing the call over the Internet, and since the iPhone is obviously phoning home, it should be easy for Apple to know the source and destination but when my wife called the Apple tech seemed to just want to read a script instead of investigate this potentially serious breach of security. In addition to these two incidents there have been numerous others where her displays says her mother is calling via Facetime but yet her mother is not calling. Seeing as my wife Facetimes with her mother, with my children getting on the phone as well, I find this possible issue is worth more than a reset your settings on the phone reply. Has anybody else heard of or seen issues like this?

    This is wild, this just happened to us.
    My husband and I both have iPhone 4's. I left my iPhone on my bed in a room by itself while my husband and I were downstairs in the Family Room together.
    His phone starts ringing and it's a FaceTime from me, but I'm in front of him and my phone is upstairs.
    Ok, so of course if this is simply an breach of our phone protocol - that concerns me of course. But to be honest, I'm relieved to know there's a reasonable explanation - because otherwise we would have to call 911 to do a more thorough search for intruders in our house.
    But seriously, what's going on here. My husband and I want to disable Facetime altogether. Why have it if it won't work securely?

  • How detect method calls that are not already in 1.4

    My program is compiled with JDK 1.5 or 1.6 and retroweaved to 1.4.
    If I do not take care I may type
    int i=65;
    Character.isDigit(i);
    instead of
    Character.isDigit(char)i);
    Without casting to char it uses a method that exists only since 1.5 but not
    yet in 1.4.
    There are a few other methods that had been added since 1.5
    Their use leads to NoSuchMethodError on 1.4 clients.
    Their usage must be avoided.
    How can I recognize them at compile time?
    Or has anybody written a tool to check all method calls
    whether they already exist in 1.4 ?
    If not I would write it myself and probably will use the javap output.
    After reading through the docs of java.lang.reflect.Method I guess that
    there is no flag telling when a method had been introduced.

    there was some discussion on that here:
    http://forum.java.sun.com/thread.jspa?threadID=586602
    If you use ant, you could also try and configure the src and target properties of javac task:
    http://ant.apache.org/manual/CoreTasks/javac.html
    Alper

  • How do I get ringtones that are not listed in the phone

    how do I get ringtones that are not on the phone's list?

        Thanks so much for providing that information sidmorgy. There are options available to do a media retrieval that may provide help with retrieving available ring tones that were previously purchased. You can access the steps here http://vz.to/102YOjg to see if that option will work for you. Please keep us posted on the outcome.
    CandiceH_VZW
    Follow us on Twitter @VZWSupport

  • I am getting many days Called US holidays that are not US holidays and ones I do not celebrate.  How can I manage this list of days

    I am getting many days showing up in the US holiday Ca;endar that are not US holidays and days that I do not celebrate.  How can I manage this list

    You could also go through your messages app and see if you have videos or photos in there. Delete unwanted emails and empty the trash in each account. If you are trying to update over wifi try doing it by plugging into iTunes.
    If you need more space for an iOS update - Apple Support

  • Blocking incoming calls

    Good Afternon. Would someone please explain the 10 phone number limit for blocking incoming calls? I have used Vonage [which has no limit] Optimum on line [100 limit] Time Warner [30 limit and it cleared the list every 90 days] Fios only offers me 10 ? Are you aware of the problem with telemarketers? I don't think so. I'd like Fios to be more proactive in allowing me to defend the peace and quiet of my home, by expanding this area. It's quite pitiful compared to other vendors I have used, and it is the Main reason that I am not renewing my contract with Fios when we are done. Thank you.

    *60 (Call Block) is the easiest way to block an incoming caller, however to my understanding only local, landline numbers can be blocked with *60. To use it, simply dial *60 and follow the prompts. But call Verizon first to set up a monthly subscription or you will be charged per use charges which can really add up.
    A really great option which I have on my landline phone is called Do Not Disturb. You can make a list of up to 15 phone numbers which are the only people who can get through to you when you have DND turned on. (You can turn it on and off anytime you want through an 800 number.) NO other calls, including telemarketers, "unavailable" numbers, etc. can get through. If you have home voice mail you can choose to send the blocked calls to your voice mail so they can leave a message. Otherwise they will get a recording saying "The party you are calling does not wish to be disturbed at this time." There are also two other rejection messages you can choose.
    Also you can choose a 4 digit pin to give to people you want to be able to get through but I have never used that option; I just put them on the "allowed numbers" list.

  • Block incoming calls

    how to block incoming calls on iphone

    They really need an App .. native or not to block calls. I have tried with my provider and they offer a blocking service .. but only if the caller is advertising thier number. Therfore I can not block unknown or blocked numbers from calling me! These are the ones I really need to block... My wifes phone is one digit off mine .. last night at 3:30am we get called by a blocked number at the same time and of course .. no one on the other end... robocallers should be illegal.
    If your in Canada I would suggest filing a complaint to the CRTC on the abuse of unknown/blocked numbers and our inability to block or even report them. I can only file a report if I have a phone number displayed I sent in my complaint this morning to them after finding out Rogers had no way for me to prevent these phone calls.

  • "one or more of the items in your selection contains Aperture albums that are not supported in iphoto".

    I have some folders in iPhoto called 'Recovered Folder'. When I try to delete them I get this message: "one or more of the items in your selection contains Aperture albums that are not supported in iphoto".
    I don't use Aperture (did install it to try it out), and have deleted Aperture App from my Mac.
    How can I get rid of these fodlers?

    i finally figured this out:
    fyi, iphoto and aperture can now share (i.e., access) the same library. apple details it here:
    http://support.apple.com/kb/HT5260?viewlocale=en_US&locale=en_US
    i use both iphoto and aperture, and i suspect something went amiss, at some point, while aperture was accessing my iphoto library.
    this is how i fixed the problem:
    i launched aperture, then (per the instructions linked above) switched to (i.e., accessed) my iphoto library. i was then able to delete the "recovered folder" and the album it contained. i then quit aperture and relaunched iphoto.
    NOTE: at that time, although i expected the "recovered folder" to be gone, it was still present. but this time, i was able to delete the folder from within iphoto without the "contains aperture items" error message.
    (Sparky030405, i realize you've since deleted aperture. while i can't say my method is the *only* way to solve this problem, it's the way i was able to solve it. so, you might consider reinstalling aperture in order to delete the folder, then uninstalling aperture, once again.)

  • How to get rid of pix in my iphoto library that are not imported?

    I needed to clear the memory card of my husband's camera recently, and didn't have the canon software installed on my computer. So I tried using iphoto, but it crashed because the movies are high resolution and I guess iPhoto couldn't handle it. I managed to get them transferred another way, but now every time I launch iPhoto I get a message telling me that there are images in my iPhoto library that are not imported, and asking if I want to import them. If I try to import them, iPhoto crashes again. If I say "cancel" I get the same message again next time. I tried going into the finder to get rid of them but don't know where they are. No matter what I try to throw away, I still get the same message. How to get rid of those photos?

    and didn't have the canon software installed on my computer.
    You could also have used Image Capture in your Applications Folder.
    but it crashed because the movies are high resolution and I guess iPhoto couldn't handle it.
    iPhoto managed high resolution just fine. Perhaps you don't have the correct codec.
    To solve you more immediate problem: go to your Pictures Folder and there you'll see your iPhoto Library Folder. Open it and inside you'll see a folder called 'Importing' or something close to that. Drag it to the desktop. Restart iPhoto. Does that help?
    Regards
    TD

  • Identify special characters that are not supported by an embeded font

    Hi!
    I'm useing embeded fonts as CFF in my flex 4.5.1 application and I have problems with the special charcters  like Ă, Â, Î, Ș, Ț or arabic text, that are not included in my embeded font. This are displayed in my RichEditableTect component useing the default font (Arial).
    Is there any way to block the user when he tries to add such characters? 
    Or can  I identify them before saveing , in order to format the text like <Text Font="ExoticFont"...>Hello<Text font-family="Arial">ë</Text></Text> ?

    I think you want to use Font.hasGlyphs.  If you are using the @font-face directive it is hard to get to the Font class so you may wish to switch to using the directive.

  • How do I find all tracks in library that are not in my playlists?

    What's the very best way to find all tracks in your library that are not in your playlists? I only use playlists to show the tracks that i use.. unfortunately I have many extra unwanted tracks buried in my library now because I did not know you could option+delete to delete library tracks from a playlist.

    doofmaczemy wrote:
    oh dear.. it makes a TEXT FILE?
    I guess if it put them in a playlist then they'd be in a playlist so shouldn't be in the playlist... Ow my head hurts!
    How about this as an idea? Create a new top level playlist folder, call it *All Playlists*, then move all your existing folders & playlists inside this folder. Create a new top level smart playlist ( outside of *All Playlists* ) with the rules:
    Playlist is Music AND
    Playlist is not All Playlists
    Call it *Unlisted Temp*
    Create a new top level regular playlist called Unlisted, select all the tracks in *Unlisted Temp* and drag them into Unlisted. You can now delete *Unlisted Temp*, move all your folders & playlists back to their original places and delete the *All Playlists* folder.
    tt2

  • Hi can somebody please help me to get Apple phone support stop calling me to tell me that i NOT awnsering the phone!!!!

    Hi can somebody please help me to get Apple phone support stop calling me to tell me that i NOT awnsering the phone!!!!

    The battery capacity on a 5S is a little better but be sure to read the special notes on conserving battery power on these phones.   Here are two in particular.
    17 Tips to Extend iPhone Battery Life (Updated for iOS 7)
    How to improve iPhone battery life, what to do if your iPhone battery is running low - How to - Macworld UK
    Regards,  71

  • After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

    After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

    In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

    Ok no one has been able to help me so far this is it. I NEVER had these problems with photoshop CS6 extended edition!
    The best i can do to describe the dissappearing filters( from iteratrions of Photoshop CC for the last year to now) and pattern overlays were called marble, stones and concretes. where can aI find a list of pattern overlays?
    will it do any good to repost to all on this forum?

Maybe you are looking for

  • How to install or configure oracle endeca in ebusiness suite R12.1.3 64-bit

    Hi Now i currently having oracle ebusiness R12.1.3 64-bit instance which is running on OEL 5U8 64-bit , Can anyone suggest me how to configure the oracle endeca in ebusiness suite??? Can anyone provide me the link to download the oracle endeca for eb

  • ZMM Profile on IOS 7.1 will not install with ZMM 3.0

    Anybody experiencing the same issue as I have? When using ZMM server version 3.0, iPhone devices with IOS 7.1 will not receive profiles. The only thing they do receive is one MDM profile. However, I expect at least 5 ZMM profiles on the iPhone device

  • Double Sided Printing on Envy100 D410c

    Is there any way to set double sided printing as the default so that long pdf files sent through e-print will be printed double sided, saving a ton of paper?

  • Changed File Name but reverts to original file name when exported or copied

    I created a folder of 150 photos for a video montage and numbered them all by editing the file name. When I export (or copy and paste) the images to a folder on my desktop, the files all revert back to their original file names. Any ideas?

  • Problem with check-box

    Hi all, I am using flash CS3 and working on flash and ActionScript 3.0. In a flash application(.swf file), I have "3 images"(converted to movieclips) in 3 different layers, "a combo-box"(which displays a specific image upon selection in the combo-box