Blocking of Multiple SAPScript print outputs
Dear All,
Is there a way where we can stop users from printing a SAPScript Output,if its already printed once...
Regards,
srini
Hi Srini,
in standard invoice print program (Report RVADIN01) following routine can be found:
* FORM CHECK_REPEAT
* A text is printed, if it is a repeat print for the document. *
FORM check_repeat.
CLEAR repeat.
CLEAR anzal.
SELECT * INTO *nast FROM nast WHERE kappl = nast-kappl
AND objky = nast-objky
AND kschl = nast-kschl
AND spras = nast-spras
AND parnr = nast-parnr
AND parvw = nast-parvw
AND nacha BETWEEN '1' AND '4'.
IF *nast-vstat = '1'.
anzal = anzal + *nast-anzal.
repeat = 'X'.
ENDIF.
ENDSELECT.
ENDFORM. "CHECK_REPEAT
Variable <i>repeat</i> can be used to add an additional text like 'COPY' or to exit print program without printing second version.
I guess, this select is not fool proofed - users still might find a way to print twice without your notice, but it's a start. You should have a look at <i>anzahl[/i), too - this variable steers the number of copies and should be set to 1 in your requirement.
Regards,
Christian
Similar Messages
-
Email of SAPSCRIPT Print Output
Hi,
Can anyone please tell me steps to send an External Email from SAPSCRIPT.
let me elaborate more on this.I have a "Z" print program for printing RFQ's.Now we need to send this output thru Email as well to vendors.
Thanks in advance,Hi,
You do not need to bother with the OTF stuff - you can ditch it.
Use the code below to achieve the e-mailing :
*--- Set the recipient e-mail address
LW_COMM_VALUES-ADSMTP-SMTP_ADDR = [email protected]
*--- Set title
LW_SNAST-TDCOVTITLE = SY-TITLE
*--- Set sender and recipient details
CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
EXPORTING
PI_COMM_TYPE = 'INT'
PI_COMM_VALUES = LW_COMM_VALUES
PI_REPID = SY-REPID
PI_SNAST = LW_SNAST
PI_MAIL_SENDER = SY-UNAME
IMPORTING
PE_ITCPO = GW_ITCPO
PE_MAIL_RECIPIENT = LW_RECIPIENT
PE_MAIL_SENDER = LW_SENDER
EXCEPTIONS
COMM_TYPE_NOT_SUPPORTED = 1
RECIPIENT_CREATION_FAILED = 2
SENDER_CREATION_FAILED = 3
OTHERS = 4.
The objects used here are defined as follows :
LW_COMM_VALUES TYPE SZADR_COMM_VALUES
LW_SENDER TYPE SWOTOBJID
LW_RECIPIENT TYPE SWOTOBJID
LW_SNAST TYPE SNAST
This will give you the recipient and sender details. Now all you need to do is call the function OPEN_FORM as follows:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
DEVICE = 'MAIL' <--- Note: Device is PRINTER for printing
DIALOG = SPACE
FORM = SAPscript form name
LANGUAGE = SY-LANGU
OPTIONS = GW_ITCPO
MAIL_SENDER = LW_SENDER
MAIL_RECIPIENT = LW_RECIPIENT
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
CODEPAGE = 11
OTHERS = 12.
This is far easier to use this method.
Any questions, please let me know.
Kind regards
Colin -
SAPscript print program for multiple pages
Hello friends,
How to write SAPscript print program for multiple pages? please help me.
Thanks and regards,
Shivanand.I believe you have posted this question in the wrong forum. There is an ABAP Forms Printing Forum.
-
I'm packaging some PPTs used for ILT using Captivate. The package is going to include an .exe version and two handout versions. One for students and one for instructors. Has anyone attempted to add or modify the templates for the print output?
I've just tried to use the Handout Template and it has everything scrunched in the center of the page.
When I use this as a handout for students I'd like the graphic more over on the left and more room for longer lines on the right for student notes.
I'd also like to use the handout format with the slide notes for an Instructor's Handout.
Any help would be appreciated.
Thank you,
SusanSusan then asked, "Since I've not written macros do you have a good source for learning how?" and I sent the following reply:
"Try this link as a starting point: http://msdn.microsoft.com/en-us/library/dd721892(v=office.12).aspx
However, I must forewarn you, to customize your Captivate documentation your macros will probably need to manipulate images, resizing and/or repositioning them. For that, you will need to learn how to use Visual Basic for Applications (VBA) to manipulate Microsoft Word's "Shapes" and "InlineShapes" collections. Initially, all the slide images in the Word document that Captivate produces are inline shapes, attached to the Word paragraph in which they occur. You can resize an inline shape, but you can't reposition it directly. You can either adjust the position and alignment of the paragraph to which it is attached, or you can convert it to a regular Shape whose position can be controlled independently of nearby text. The following procedure is one I use to position the first slide by itself on the first page of the Word document:
Sub FloatPicture1()
Dim iSlideCount As Integer
Dim oILS As InlineShape
Dim oFloatingShape As Shape
iSlideCount = ActiveDocument.InlineShapes.Count ' this line just shows you how to find total number of pics in the document
Set oILS = ActiveDocument.InlineShapes(1) ' this line sets up a convenient reference to the first picture in the InlineShapes collection
With oILS ' the "With" to "End With" block lets us do multiple actions on the referenced object
.Select ' If we hadn't done the "Set oILS" and "With oILS" steps, we would have had to type this line in full as:
' ActiveDocument.InlineShapes(1).Select
' and the following line as Set oFloatingShape = ActiveDocument.InlineShapes(1).ConvertToShape
Set oFloatingShape = .ConvertToShape
End With
With oFloatingShape ' Now that we have floated the shape, we can set its position
.RelativeVerticalPosition = wdRelativeVerticalPositionPage ' these settings control how word will interpret
.RelativeHorizontalPosition = wdRelativeHorizontalPositionPage ' the .Left and .Top values that follow.
.Left = CentimetersToPoints(2)
.Top = CentimetersToPoints(6.5)
End With
Set oILS = Nothing ' just some VBA housekeeping here, now that we have finished with these objects
Set oFloatingShape = Nothing
End Sub ' FloatPicture1"
By the way, note that when we converted InlineShape #1 to a floating shape, that would have reduced the count of InlineShapes by 1, and what was previously InlineShape #2 is the new #1. Your code may sometimes need to take that change of numbering into account.
Trevor -
HP LaserJet P1102W - no print output in Linux Mint 17.1 Cinnamon Desktop
I've just done a default install of Linux Mint 17.1 - as feared, no print output.
I'm guessing I need to install a driver - but I couldn't find anything easily on HP site, only Windows/Mac OS stuff. Are HP printers generally linux friendly? Where can I download drivers if they are? More over, I'm a total linux newbie, so any drivers need to be easily installed! I'm not currently familiar with Terminal windows and line commands!
My printer does have wireless enabled, but I have it connected via direct USB also.
Linux Mint did offer to run a diagnostic tool/debugging tool which gave a great deal of what means nothing to me. Debug output is below if it is helpful, but hoping a simple driver install will cure all ...
Debug Output:
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Is local server publishing?):
{'local_server_exporting_printers': False}
Page 3 (Choose printer):
{'cups_dest': <cups.Dest HP-LaserJet-Professional-P-1102w (default)>,
'cups_instance': None,
'cups_queue': u'HP-LaserJet-Professional-P-1102w',
'cups_queue_listed': True}
Page 4 (Check printer sanity):
{'cups_device_uri_scheme': u'hp',
'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'printer-info': u'Hewlett-Packard HP LaserJet Professional P 1102w',
'printer-is-shared': True,
'printer-location': u'Leela',
'printer-make-and-model': u'HP LaserJet Professional P 1102w, hpcups 3.14.3, requires proprietary plugin',
'printer-state': 3,
'printer-state-message': u'',
'printer-state-reasons': [u'none'],
'printer-type': 167948,
'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-Professional-P-1102w'},
'cups_printer_remote': False,
'hplip_output': (['',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mDevice Information Utility ver. 5.2\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mSystem Tray Status Service ver. 2.0\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mhp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a\x1b[0m',
'\x1b[01mDevice Parameters (dynamic data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' agent1-ack False ',
' agent1-desc Black toner cartridge ',
' agent1-dvc 0 ',
' agent1-health 0 ',
' agent1-health-desc Good/OK ',
' agent1-hp-ink False ',
' agent1-id 0 ',
' agent1-kind 4 ',
' agent1-known False ',
' agent1-level 100 ',
' agent1-level-trigger 0 ',
' agent1-sku 85A ',
' agent1-type 1 ',
' agent1-virgin False ',
' back-end hp ',
" cups-printers ['HP-LaserJet-Professional-P-1102w'] ",
' cups-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' dev-file ',
' device-state 1 ',
' device-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' deviceid MFG:Hewlett-Packard;MDL: LaserJet Professional P ',
' 1102w;CMD:ZJSJS,URF,PCLm,PJL,ACL,HTTCLSLSRINTER;DEHPHP ',
' LaserJet Presessional P 110;F;FWVER:20110826; ',
' duplexer 0 ',
' error-state 0 ',
' host ',
' in-tray1 1 ',
' in-tray2 1 ',
' is-hp True ',
' media-path 1 ',
' panel 0 ',
' panel-line1 ',
' panel-line2 ',
' photo-tray 0 ',
' port 1 ',
' r 0 ',
' revision 254 ',
' rg 000 ',
' rr 000000 ',
' rs 000000000 ',
' serial 000000000W4037X5PR1a ',
' status-code 1000 ',
' status-desc Idle ',
' supply-door 1 ',
' top-door 1 ',
'\x1b[01m',
'Model Parameters (static data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' align-type 0 ',
' clean-type 0 ',
' color-cal-type 0 ',
' copy-type 0 ',
' embedded-server-type 0 ',
' fax-type 0 ',
' fw-download False ',
' icon HP_LaserJet_1012.png ',
' io-mfp-mode 6 ',
' io-mode 1 ',
' io-support 10 ',
' job-storage 0 ',
' linefeed-cal-type 0 ',
' model HP_LaserJet_Professional_P_1102w ',
' model-ui HP LaserJet Professional P 1102w ',
' model1 HP LaserJet Professional P 1102w Printer ',
' monitor-type 0 ',
' panel-check-type 0 ',
' pcard-type 0 ',
' plugin 1 ',
' plugin-reason 1 ',
' power-settings 0 ',
' pq-diag-type 0 ',
' r-type 0 ',
' r0-agent1-kind 4 ',
' r0-agent1-sku 85A ',
' r0-agent1-type 1 ',
' scan-src 0 ',
' scan-type 0 ',
' status-battery-check 0 ',
' status-dynamic-counters 0 ',
' status-type 8 ',
' support-released True ',
' support-subtype 2202411 ',
' support-type 2 ',
' support-ver 3.12.6 ',
" tech-class ['LJZjsMono'] ",
" tech-subclass ['NoAutoDuplex'] ",
' tech-type 3 ',
' usb-pid 4138 ',
' usb-vid 1008 ',
' wifi-config 3 ',
'Done.',
['\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m',
'\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-systray requires Qt4 GUI and DBus support. Exiting.\x1b[0m',
'\x1b[35;01mwarning: Unable to connect to dbus. Is hp-systray running?\x1b[0m',
0),
'is_cups_class': False,
'local_cups_queue_attributes': {'charset-configured': u'utf-8',
'charset-supported': [u'us-ascii', u'utf-8'],
'color-supported': True,
'compression-supported': [u'none', u'gzip'],
'copies-default': 1,
'copies-supported': (1, 9999),
'cups-version': u'1.7.2',
'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'document-format-default': u'application/octet-stream',
'document-format-supported': [u'application/octet-stream',
u'application/pdf',
u'application/postscript',
u'application/vnd.adobe-reader-postscript',
u'application/vnd.cups-pdf',
u'application/vnd.cups-pdf-banner',
u'application/vnd.cups-postscript',
u'application/vnd.cups-raster',
u'application/vnd.cups-raw',
u'application/x-cshell',
u'application/x-csource',
u'application/x-perl',
u'application/x-shell',
u'image/gif',
u'image/jpeg',
u'image/png',
u'image/tiff',
u'image/urf',
u'image/x-bitmap',
u'image/x-photocd',
u'image/x-portable-anymap',
u'image/x-portable-bitmap',
u'image/x-portable-graymap',
u'image/x-portable-pixmap',
u'image/x-sgi-rgb',
u'image/x-sun-raster',
u'image/x-xbitmap',
u'image/x-xpixmap',
u'image/x-xwindowdump',
u'text/css',
u'text/html',
u'text/plain'],
'finishings-default': 3,
'finishings-supported': [3],
'generated-natural-language-supported': [u'en-us'],
'ipp-versions-supported': [u'1.0',
u'1.1',
u'2.0',
u'2.1'],
'ippget-event-life': 15,
'job-creation-attributes-supported': [u'copies',
u'finishings',
u'ipp-attribute-fidelity',
u'job-hold-until',
u'job-name',
u'job-priority',
u'job-sheets',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-hold-until-default': u'no-hold',
'job-hold-until-supported': [u'no-hold',
u'indefinite',
u'day-time',
u'evening',
u'night',
u'second-shift',
u'third-shift',
u'weekend'],
'job-ids-supported': True,
'job-k-limit': 0,
'job-k-octets-supported': (0, 476568600),
'job-page-limit': 0,
'job-priority-default': 50,
'job-priority-supported': [100],
'job-quota-period': 0,
'job-settable-attributes-supported': [u'copies',
u'finishings',
u'job-hold-until',
u'job-name',
u'job-priority',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-sheets-default': (u'none', u'none'),
'job-sheets-supported': [u'none',
u'classified',
u'confidential',
u'form',
u'secret',
u'standard',
u'topsecret',
u'unclassified'],
'jpeg-k-octets-supported': (0, 476568600),
'jpeg-x-dimension-supported': (0, 65535),
'jpeg-y-dimension-supported': (1, 65535),
'marker-change-time': 0,
'media-bottom-margin-supported': [423, 547],
'media-col-default': u'(unknown IPP value tag 0x34)',
'media-col-supported': [u'media-bottom-margin',
u'media-left-margin',
u'media-right-margin',
u'media-size',
u'media-source',
u'media-top-margin',
u'media-type'],
'media-default': u'iso_a4_210x297mm',
'media-left-margin-supported': [423, 635],
'media-right-margin-supported': [423, 635],
'media-size-supported': [u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)'],
'media-source-supported': [u'auto',
u'manual'],
'media-supported': [u'iso_a6_105x148mm',
u'iso_a5_148x210mm',
u'jpn_hagaki_100x148mm',
u'om_double-postcard_148.17x200.03mm',
u'om_jb5_182.12x257.05mm',
u'na_executive_7.25x10.5in',
u'om_16k195x270_195.09x269.88mm',
u'om_16k184x260_184.15x260mm',
u'oe_16k197x273_7.75x10.75in',
u'na_letter_8.5x11in',
u'iso_a4_210x297mm',
u'oe_flsa_8.5x13in',
u'na_legal_8.5x14in',
u'na_monarch_3.875x7.5in',
u'iso_dl_110x220mm',
u'na_number-10_4.125x9.5in',
u'iso_c5_162x229mm',
u'om_env-b5_176.04x250.12mm',
u'custom_min_3x5in',
u'custom_max_17x36in'],
'media-top-margin-supported': [423, 547],
'media-type-supported': [u'stationery'],
'multiple-document-handling-supported': [u'separate-documents-uncollated-copies',
u'separate-documents-collated-copies'],
'multiple-document-jobs-supported': True,
'multiple-operation-time-out': 300,
'natural-language-configured': u'en-us',
'notify-attributes-supported': [u'printer-state-change-time',
u'notify-lease-expiration-time',
u'notify-subscriber-user-name'],
'notify-events-default': [u'job-completed'],
'notify-events-supported': [u'job-completed',
u'job-config-changed',
u'job-created',
u'job-progress',
u'job-state-changed',
u'job-stopped',
u'printer-added',
u'printer-changed',
u'printer-config-changed',
u'printer-deleted',
u'printer-finishings-changed',
u'printer-media-changed',
u'printer-modified',
u'printer-restarted',
u'printer-shutdown',
u'printer-state-changed',
u'printer-stopped',
u'server-audit',
u'server-restarted',
u'server-started',
u'server-stopped'],
'notify-lease-duration-default': 86400,
'notify-lease-duration-supported': (0,
2147483647),
'notify-max-events-supported': [100],
'notify-pull-method-supported': [u'ippget'],
'notify-schemes-supported': [u'dbus',
u'mailto',
u'rss'],
'number-up-default': 1,
'number-up-supported': [1, 2, 4, 6, 9, 16],
'operations-supported': [2,
4,
5,
6,
8,
9,
10,
11,
12,
13,
14,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
34,
35,
37,
38,
56,
57,
59,
16385,
16386,
16387,
16388,
16389,
16390,
16391,
16392,
16393,
16394,
16395,
16396,
16397,
16398,
16399,
16423,
14],
'orientation-requested-default': None,
'orientation-requested-supported': [3,
4,
5,
6],
'output-bin-default': u'face-down',
'output-bin-supported': [u'face-down'],
'page-ranges-supported': True,
'pages-per-minute': 1,
'pages-per-minute-color': 1,
'pdf-k-octets-supported': (0, 476568600),
'pdf-versions-supported': [u'adobe-1.2',
u'adobe-1.3',
u'adobe-1.4',
u'adobe-1.5',
u'adobe-1.6',
u'adobe-1.7',
u'iso-19005-1_2005',
u'iso-32000-1_2008',
u'pwg-5102.3'],
'pdl-override-supported': [u'attempted'],
'port-monitor': u'none',
'port-monitor-supported': [u'none'],
'ppd-timestamp': u'*',
'print-color-mode-default': u'color',
'print-color-mode-supported': [u'monochrome',
u'color'],
'print-quality-default': 4,
'print-quality-supported': [3, 4],
'printer-commands': u'none',
'printer-current-time': u'(IPP_TAG_DATE)',
'printer-dns-sd-name': u'Hewlett-Packard HP LaserJet Professional P 1102w @ Leela',
'printer-error-policy': u'retry-job',
Hi @durandal,
I read your post and see that you need the drivers for the P1102w printer. I can provide the website for you.
Here is the link for the HP Linux Imaging and Printing website. HP Linux imaging and printing.
Here is the link for the P1102w drivers. HP LaserJet Professional p1102w Printer.
If you need more information, please post your questions at the Linux Distribution Forums.
If you appreciate my efforts, please click the Thumbs up button below.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Email Sending of Purchase Order Created versus Print Output
Dear All,
I have been successful in sending the Purchase Order created as a PDF Attachment in email.
The problem i am facing is in the formatting of the attached output.
The attachment has different bold characters as compared to the print output of the PO , though both the outputs are using the same sapscript.
I am not able to find the reason for the difference.
Only because of this reason, my delivery is on hold.
Please guide me on how to find where the difference could be and how to rectify it.
Thanks & Regards,
BhavikaCould you tell us which fonts you tried?
What device type did you choose? (SPAD transaction, select your output device to determine the device type)
Could you upload TrueType fonts (one normal, one bold) with RSTXPDF2 program (do not tick "do not embed font in PDF" option so that the font is embedded in the PDF file)?
Did you make sure that your font is not converted to another one? (SE73, printer font, choose your device type, click conversion button, and check what is the converted font) -
Print priview and spool print output are different
Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview one amount value is 120 coming..
when i am giving print with spool.. the amount value is showing
is 443..why it is showing wrong..
this is for perticular output type.
why perticular values are showing different in print view and
spool print.
regards,make this setting change:
in SPAD > In the menu Settings -> Spool System
In the others tab check the first check box in the Output Controller block, SAVE and exit -
Customize Print Output in CP6?
Anyone know how to customize the print output? RIght now, I have to delete and replace things in order to use the Word output.
In these forums, there are links to directions, but the links don't work.
Thanks!
MickyThe handout template is hard coded. But, working with the other templates and the Word Output document, I was able to create a template that will allow you to publish the Word images and slide notes in Word. And, you can customize the placement on the page and image sizes.
Here are instructions (I'm using Captivate 6 BTW):
1. Make all of your slide notes into closed captioning.
I was able to find the computer code to call the closed captions, but not the slide notes. So you have to drop some audio onto each slide (I'm using 1 second of silence generated in Audacity) and click the button that will turn your slide notes into closed captions. Don't worry...these won't display in your published project unless you have your skin set to display them.
2. Open a new Word document.
3. Copy and paste the script below into your Word document. This script as is will print 2 slides per page with slide notes above the images.
[CPDefaultItemTemplates[CPTemplates[TIMEBLOCK[CPContentInsert]TIMEBLOCK]CPTemplates]CPDefa ultItemTemplates]
[CPCapturedSlide
[CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
[CCN[CPCC]CCN]CPTemplates]
[CPSlideImage][size:282x214]
CPCapturedSlide]
[CPContentSlide
[CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
[CCN[CPCC]CCN]CPTemplates]
[CPSlideImage][size:282x214]
CPContentSlide]
4. Adjust the script to your liking:
1. Change the image size. This is set to 282 x 214. But you can change the image size to whatever you want it to be. If you make the size larger, fewer will fit on a page.
2. Move the slide notes, if you want. This is set to put the slide notes above the images. To put the notes below the images, move the [CPBlockInsert][CPTemplates[CC1[CPCC]CC1]
[CCN[CPCC]CCN]CPTemplates] to below [CPSlideImage][size:282x214]. Be sure to move both instances, and don't copy/paste...move!
3. Use Word's formatting options to change the page display. For example, if you use Word to center the code about slide images, the slides will be centered on the page when you publish. You can add your company's logo in the header. Type CPMovieTitle into one place to print the project title...either header or footer. It won't work if you put it in more than one place for reasons known only to Captivate. You can put page numbers or dates in the footer. You can change the font for the slide notes by highlighting the notes code (see #3 above) and making it larger, smaller, different, bold, italic, etc., etc., etc. Whatever you would do with Word to format your handouts, do in this document.
4. Add anything that you want to print on every page outside the [ ] blocks. For instance, if you want to blank lines to print under the notes, you can add before the code for the images.
5. Save the Word document in .doc format with a memorable name where you can find it. You don't have to save with the templates in the Captivate program file.
6. Publish to Print. In the upper, right corner, in the Type section, click the button with ... It's to the right of Handout. That will open a window which will allow you to browse to find and select your Word document. The Layout Options won't do anything, so no need to mess with them. Set the rest of your settings...like project title and publish location and publish.
Things that I don't know, but would like to:
1. Will this work in Captivate 7? Will someone try and let us know?
2. Can you save the Word file in .docx format?
3. Can you set the Word doc to landscape instead of portrait? (I'll bet that you can, but haven't tried it.)
4. What Word options won't work? I know that you can't put this code inside a Word table. Using column and page breaks, I got mine to print with the slide notes on the left and images on the right. Other than that, who knows? Word is a big program, so you'll just have to test.
5. What is the code to call the slide notes? I've called Adobe support twice and can't get a straight answer. If we all start calling and emailing, maybe they'll tell us.
So, I hope this helps. There are so many threads about this and I can't repost everywhere. So, please link to this thread if you see another one where this info will help.
Happy printing!
Rebecca -
Multiple Adobe Forms Output in single Adobe Form
Hi Experts,
When we login to portal a list of applications will be available in a table, each record contains details of the application. when we click on first field of any record in that table it will display one adobe form. Under the table i have a button print, suppose if i select some 5 records in the table and when i click that print button then all the 5 adobe forms output should display as a single adobe form with page breaks. I mean after completion of first adobe form output, the next adobe form output should start in a fresh page. i could able to display single adobe form but the problem is with multiple adobe forms output in single form. Any inputs will be greatly appreciated.
Regards,
VenkatHi,
The only way to solved your issue is to change your forms and give it all necessary information in several table . Like this you can manage break page depending of content.
For example, you form interface contains one header structure and a table of item . If you want to have several form into one result , change the interface by passing an internal table of header information . Then in the layout you have to use the different table to get the result you want .
Unfortunately there is no solution actually with AdObe Forms in SAP to merge several PDF into one .
Hope this help you.
Regards -
"Modifying" book templates for (locally printed) output?
Hi,
There have been many and varied threads on the subject of Apertures (in)ability to produce printed images beyond a single image per page/standard contact sheets and/or those that involve 'buying a book' [How good those books are is beyond the scope of this post ]
The light table can be used to place & scale multiple images for print output, but 'auto-scaling' seems to render this 'unreliable' at best..... [3rd parties have been 'recommended' as at least partial solutions to this problem]
It seems to me that access to the 'templates' that make up the 'book themes' would be a good idea - Darn, if I could simply double the page size from 8.5 x 11 to 17 x 22 I'd be pretty happy! [Portrait would also be really nice, but that's another story.]
Does anyone know where the 'specs' for the books are located? - If we could change the page size it seems to me we'd be home free - AP already allows us to resize photo boxes within the page and then print locally.......
Comments?
Cheers,
Ian
MBP 2.16G / 2GB / PBook G4 1GB Mac OS X (10.4.8) etc etc1) Try the couple of templates here.
2) Click on the cog and choose Save Page->As New Document Master
3) Not in Aperture - unfortunately it's design/layout tools have a few essential bits missing. AFAIK the only way to do this is to close Aperture and edit the plist files for the book template design - not for the faint hearted! You could possibly create correctly sized blank design element 'spacers' in photoshop and add them to the design as images, not sure how well that would work! -
Crystal Reports for SAP Print Output requirements like Sales Order O/P
Hello,
Has anybody used Crystal Reports for Sales Order or Invoice Print Output type requirements?
Typically these outputs get triggered via Output Management Configuration on Save of a Sales Order or Configuration.
Traditionally in the Output Management configuration of say Sales Order, we can specify the "Output Program" and the "Sapscript" or "Smart Form" or "Adobe Form".
How do we tell SAP t trigger a Crystal Report output if it is a feasible way to go?
Also can anybody tell what is SAP's strategic direction for Print Output requirements?
regards,
AtulHi Atul,
Do you have answers for your questions? If so, could you please share?
Thank you in advance,
Joã -
Sorting print output of dunning run
Hi all,
One of our clients has a machine which puts letters in envelopes. He wants us to print some code (basically stripes) on the dunning letters following a certain sequence, so all letters for one customer end up in the same envelope. In order for this to work we need all letters for one customer to come out 'one after the other'.
But - we don't know for sure how the print output is sorted and if we can control it - basically, we woul like to sort the output on customer. Because our customer can have different dunning letters if he has posts in different dunning areas or dunning levels, and we want all his letters to come out the one after the other, even if they belong to different dunning areas or dunning levels. We are using SapScript for the dunning letters.
Thanks in advance,
IoanaHi,
What is the name of the SAP standard program you are using to produce the Dunning letters ?
Please provde me with this so I can look into this as I suspect there is an easy way possibly to achieve this for you.
Kind regards
Colin. -
Item text is not appearing in the print output through IDOC?
Hello ,
I am changing the PO through IDOC. When ever there is change in the quantity ,net price and delivery date the print out put is generated autoamtically and changes are appearing the print output.
when ever there is change in the item text of PO print output is not generatiing but item text is updated in the PO.
If i change manually print out is generating for item text also but through IDOC print output is not generated . please help to slove this isuue.
i am passing the value as :
idoc_data-segnam = 'E1BPMEPOTEXT'.
e1bpmepotext-po_item = Po line item number .
e1bpmepotext-text_id = txtid.
e1bpmepotext-text_form = textform.
e1bpmepotext-text_line = line item text .
idoc_data-sdata = e1bpmepotext.
APPEND idoc_data.
CLEAR idoc_data.
CLEAR e1bpmepotext.
please help me it is urgent
Thanks
VenkateshHi Venkatesh,
Check the condition record in transaction NACE. Whether the print output field is present in the condition record.
Regards,
Gajendra. -
Background job step - Printer - Output device table
Hi,
When creating background job, printer- output device also specified for every step. Which table to check for job name and output device combination ?
Thanks.Hi Raj check table TBTCP
-
There is no printer output when using the PrintOut method
I have a VB6 app with CR XI, and a customer found a situation that when printing a report directly to the printer using the PrintOut method, there is no printer output or error message.
Some reports using the same code print normally, but a report that is preceded by another print call, presents this behavior.
And when the output is directed to the screen, we can see the report.
Could someone give me an idea of what is the problem?
Thanks,
Isis
SP - Brazil
The code used is below:
Set rpt = applic.OpenReport(App.Path & "SEFoto" + TipoRPT + ".rpt")
rpt.FormulaSyntax = crCrystalSyntaxFormula
rpt.FormulaFields.GetItemByName("Empresa").Text = "'" + Company + "'"
rpt.FormulaFields.GetItemByName("Idioma").Text = "'" + Idioma + "'"
rpt.FormulaFields.GetItemByName("Versao").Text = "'" + Versao + "'"
' ... Some lines to compose the selection formula
rpt.RecordSelectionFormula = Cond
' To evaluate the image length:
Arq = rsTMP3!FT_Arquivo
ImageScaling = FatorDeReducao(Arq, "F")
' To reduce the image length:
AchouOLE = False
For Each oSection In rpt.Sections
For Each oObject In oSection.ReportObjects
If oObject.Name = "PictureFoto" Then
Set oOleObject = oObject
AchouOLE = True
Exit For
End If
Next oObject
If AchouOLE Then Exit For
Next oSection
With oOleObject
.Suppress = True
.XScaling = ImageScaling ' 0.5 = 50%, 1 = 100%
.YScaling = ImageScaling
.Suppress = False
End With
Aguarde.Show 1
If DestinoRel = 9 Or DestinoRel = 1 Then ' Padrão ou impressora
rpt.PrintOut True ' <<<---- Here using true or false nothing happens
Else
PrintRPTtela rpt, "Fotos" ' <<<--- Here it works fine
End IfHi Isis,
Not sure if you have applied any service Packs to CR? If please do so and test again. Then you can upgrade to CR XI R2 for free, use your XI Keycode and download Service Pack 4 from this link:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
You'll find the distribution files for your app also from that same download area.
If you don't want to upgrade to XI R2 then download all patches from XI and test again. This issues rings a bell that it may have been fixed.
Thank you
Don
Maybe you are looking for
-
Wife has an older MacBook Pro. when an app uses flash player "Blocked plugin" comes up. I don't know much about mac, tried to update flash player and get newer version already installed, and update and still get same message. How do I uninstall flash
-
How do I uninstall unwanted aps, games, etc. from Snow Leopard?
I am getting ready to upgrade to Lion and I have several apps that I no longer want on my MacBook Pro OS X 10.6.8. I am used to a PC where you have to clean it up and get it ready (defrag) for new programs. Boy, I don't miss my pc. Do I need to do
-
Can't install Adobe Application Manager Updates in Photoshop CS5
I recently build a brand new computer with Windows 7 64bit. I had deactivated my product from my old computer and reactivated with no problems. However, I now can't install any of the updates for Bridge and Photoshop CS5 Extended. I get an error mess
-
Hi at all,sorry about my bad english. I bought 2009 my 2nd iPod nano. ounly problems. iTunes don't work. i need special tools to restore my mediathek like copy trans suite, because if i put my nano close to the new computer, with this empty itunes (
-
Why we use process ID in BRFplus?
hello, why we use process id in the BRFplus and its performance, different type of process id's in BRFplus please give a basic idea about BRFplus process id and if possible suggest any link. Thank you in advance.