Blu-Ray Motion menus don't work!

Hey Gang,
I posted this issue before but since I received a very limited response, I'm hoping that someone will respond to this simplier issue.
I created a empty blu-ray project. I placed the Encore Crib Motion Menu HD into the project. The menu provided NO motion even after rendering.
I then created a standard DVD project and performed the exact same steps. The motion menu now works.
I'm running a system with Vista 32 loaded & CS3.
Anyone get the motion menus to work in Blu-Ray?
Please let me know. It will take a minute to duplicate my project.
BTW, I have tried this on two seperate system yielding the same results.
Thanks!
Steve

That's right. CS4 simply behaves different to CS3!
I have never had to render out a menu to preview it. We only create motion menus for Blu-ray and only use highlight layers from Photoshop. In CS3, when you right clicked on a menu in Encore and clicked "simulate from here", you would see your highlight layers over the video immediately.
NOW, with CS4, you must render out the menu after clicking "simulate from here" to see it. VERY annoying but I'm sure Adobe did this for a good reason.
Pop-up menus I am glad to report actually work! We haven't figured out how to create motion pop-up menus yet but I suspect this is not available yet in Encore.
If anyone knows any differently, I'd love to hear it.
What's fixed and I'm SO GLAD is that during simulation, the SKIP FORWARD chapter button WORKS!!! In CS3, you had to pause the video and then could skip forward. Now, like any other normal program, while the video is playing, you can skip forward.
I would thank Adobe for fixing this but, let's face it, this just should have worked in CS3!
Regards,
Darren

Similar Messages

Blu-ray Motion Menus in Encore CS4

Okay. Just upgraded to Encore CS4 from CS3. Few nice changes.
Have crashed about 10 times (in one hour) doing simple things like, assigning folders, playing video, adding menus. Can anyone say maintenance release???
Here's a question...
WHY CAN'T I SEE THE VIDEO I HAVE ASSIGNED TO A MENU WHEN I SIMULATE?
This was working in CS3 now it's NOT in CS4. Tried on two different machines, one with ATI card an the other with nVidia!
ADOBE... are you there???

That's right. CS4 simply behaves different to CS3!
I have never had to render out a menu to preview it. We only create motion menus for Blu-ray and only use highlight layers from Photoshop. In CS3, when you right clicked on a menu in Encore and clicked "simulate from here", you would see your highlight layers over the video immediately.
NOW, with CS4, you must render out the menu after clicking "simulate from here" to see it. VERY annoying but I'm sure Adobe did this for a good reason.
Pop-up menus I am glad to report actually work! We haven't figured out how to create motion pop-up menus yet but I suspect this is not available yet in Encore.
If anyone knows any differently, I'd love to hear it.
What's fixed and I'm SO GLAD is that during simulation, the SKIP FORWARD chapter button WORKS!!! In CS3, you had to pause the video and then could skip forward. Now, like any other normal program, while the video is playing, you can skip forward.
I would thank Adobe for fixing this but, let's face it, this just should have worked in CS3!
Regards,
Darren

Pull Down Menus Don't Work Since New Muse update

I have only just updated adobe Muse and the pull down menus don't work on my website anymore!
Can someone help me?

Hi
Please share the site url , also if you have made any changes to menu before publish/update the site then please revert back the changes and then check.
Make sure the menu type is all pages.
Thanks,
Sanjit

When burning to blu-ray gets 99% done then error "device not ready"

I have Elements 11 and an ASUS Combo burner. I can burn to DVDs but when I try to burn to blu-ray it gets done encoding and compiling then at 99% switchs message to "device not ready". The computer sees the drive and the disc is formatted. Any thoughts on why Elements stops right when at end before actually burning to the disc?

I don't know the answer but I suspect Blu-Ray disks are not supported in PSE. I haven't tried it personally but I will have to try it one of these days when my computer is repaired to my satisfaction. I was without a machine for nearly two weeks and now I am using a borrowed one from a friend.

Red frames in my Blu-ray Motion Menu

It seems like every time I start a new project, Adobe has a new problem for me to work through.
I am building a Blu-ray that has a motion menu that is the length of a song. I've done this before and had no problems. But for some reason this time Encore CS6 is doing something odd. On the finalized disc, about two seconds into the motion menu, what I had for the motion menu is replaced by solid red. It flickers a few times at first, and then stays solid red until about the 35 second mark, where it goes back to normal. The menu still works, and the buttons are all still visible and selectable.
Part of the video was created in After Effects and exported as an .mp4 file. That was brought into Premiere Pro CS6 and placed in a timeline which had a single frame of the menu as an image until about the 37 second mark, which is when the animated video from AE would start. This timeline was exported as an H.264 Blu-ray m4v file with a 20-35mbps rate, which is what all the other videos are set to. The video itself plays fine if I bring it back into Premiere or watch it somewhere else, but as soon as Encore transcodes it for the menu, I get the red screen near the beginning. I have tried higher and lower bit rates, but no matter what, it always does it in the same spot for the same amount of time.
Is this an Encore CS6 issue? Does Encore not like it when there is not much motion in a motion menu? I have done others where there is no motion for large parts of them and had no issues. Or a video driver issue, or a video file issue? Should I just use an mp4 for the motion menu video since it gets transcoded anyways? Or does Encore act up if a motion menu is too long?

You are a life saver. I imported the video as an mp4 and not an already-compliant m4v, and Encore rendered everything perfectly.
My list of what to do, what not to do, and tricks for getting this program to work properly is getting longer and longer. I can see why it's bundled with Premiere Pro and not a stand alone product that costs money. And I can see why they are not making new versions of it anymore. Sony Vegas Pro works far better apart from not being able to switch menu pages while keeping the background and music going.

Blu-ray disc chapter buttons not working on authored disc.

Hi all,
I've created many SD dvd's with chapter menus without problem. However, my first attempt at a blu-ray disc is causing me trouble.
I'm running Enore CS4 under Windows 7. I had to install the "pxengine4_18_16a" driver because Encore CS4 was hanging up when i selected the "BLU-RAY" format under the Build tab. After i got Encore CS4 working, i started assembling the BD video.
I linked all of the chapter menu buttons to chapter playlists pointing to single chapter points in the timline. I tested the BD in Preview. It shows that the menu buttons are linked properly and are functioning. However, the authored BD disc isn't playing the chapters after selecting the chapter menu buttons. All of the other BD disc buttons work like; PLAY ALL, RESUME, MENU, MAIN MENU, just not the actual buttons that play the various chapter points on the timeline.
Is this a result of installing the "pxengine4_18_16a" driver or something else?
Has anyone encountered this problem with BD authoring?

The BD is not playing properly on the pc or a standalone?
I test BD first as an iso with Power dvd ultra with Virtual Clone DVD.
If the menu works properly its the standalone, might burn with a lower speed.
When dvd came out first there was a lot of incompatibilities, history is repeating itself.

Blu-ray motion menu resolution

Does Encore not support 1920*1080 resolution motion menus for Blu-ray discs? Whenever i create a motion menu it displays at 720*480 (100%) even though it is a 1920*1080 video. Am I missing something?
Thanks,
Scott

Encore does support all high definition resolution Blu-ray menus, but menu preview is limited to 720x480.
Try burning a BD-RE and then checking it in a BD player to see the full high definition motion menu.

Javascript menus don't work.

I'm having some trouble with javascript menus (or what I believe are javascript menus). Whether it matters or not I am not sure, but it happens in both Firefox and Chrome...IE works fine.
Examples of sites with menus that don't work:
1. Orbitz.com: Can't pull down the "Adult" or "Child" menus.
2. toyota.com: Can't "select vehicle" at the top of the page.
I get no error messages. I have started Firefox in safe mode, I have also reset Firefox.

I do have a touch screen. Can't believe that matters!
I toggled both of these settings to:
dom.w3c_touch_events.enabled = 0
dom.w3c_touch_events.expose = false
However the selector still does not work. I don't get a "javascript;;" message.
This occurs both in Safe Mode and standard mode.

Samsung SE-506BB Blu-Ray Player/Writer no longer working after latest OS X update

Since downloading the latest OS X update ("Command Line Developer Tools for OS X Mavericks") that rolled out today, I've discovered that my external Samsung SE-506BB Blu-Ray player will no longer read any discs and that ejecting and restarting the device and updating the device firmware does nothing to solve the problem.
This exact issue has been reported numerous times since January on these forums
https://discussions.apple.com/thread/5829322 (1/26)
https://discussions.apple.com/thread/5836103 (1/27)
https://discussions.apple.com/thread/5895950 (2/12)
and in each instance deduced the problem to be the direct result of some software glitch in the most recent Mavericks update.
Is anyone else experiencing this issue currently and/or managed to fix it on their end? Moreover, admins, what if anything is Apple doing to correct this problem given that it's clearly a persistent issue? Please comment below if you happen to know anything so we can all get to the bottom of this mystery.

I just noticed this today with my player as well, which had otherwise been working perfectly since first purchasing it a couple of months ago.
The only source to my immediate problem that I can think of is the "Command Line Developer Tools for OS X Mavericks" update that rolled out today, which I installed shortly before attempting to boot up my drive -- the only thing I can ascertain is that this has to be an ongoing software update issue with Apple that affects some/all of the players with each problematic update round, since others have reported experiencing similar problems from as far back as January.
Were you able to fix your problem at all?
Message was edited by: next_imaginaut

My World blue blank screen,apps don't work

I wrongly updated OS6 in my Bold 9700, phone didn't work well when I realised I downgraded software to latest version OS5. Since then, when I try to access info in Myworld about an App the screen goes blank, I can pres the menu key and it gives the option to download but then I see nothing. I have no problems with some apps,but facebook just doesn't work at all. I download it but it doesn't give me the option to 'run'. In the application list it appears,so it is in the phone but there is no icon. Other apps (such as bank apps) don't work either,they show 'error 'net.rim.device.api.ui.container.GridFieldManager not found'.
I have done a security wipe, deleted and reinstalled all apps including Blackberry World. I have reinstalled software about 4 times,battery pulls...you name it.
I have data allowance with O2, but the phone is an unlocked AT&T Bold 9700 brought from the States.
Any tips on what else can I do?The phone used to reset itself when I accessed My World,it seems it stopped doing that now, but still can't see anything when I want to see an App info. Thanks!!
Solved!
Go to Solution.

Hi and Welcome to the Community!
A few things to try, in order of "less destructive" to more-so:
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
I suggest that you clear the AppWorld application cache:
1. Open App World
2. Go to My World
3. Follow one (and only one!) of these steps:
3a. For keyboard-based BB's -- Hold down the ALT key and then press, in sequence R, then S, then T
3b. For Touch Screen Only BBs -- Hold the num-lock (!?123) button so it locks and then press, in sequence 3, then 4, then (
3c. For newer (e,g., OS6 and 7) BB's, see this KB:
KB24714 How to clear the BlackBerry App World cache
4. AppWorld should close.
5. If your BB locks after issuing the cache clear, perform a battery pull reboot
6. Return to AppWorld/MyWorld (it may be sluggish while it re-synchronizes).
If step (4) does not happen as listed, then the clear cache did not work.
128268 wrote:
'error 'net.rim.device.api.ui.container.GridFieldManager not found'.
Given that, it's possible that the OS loading did not go well (for one reason or another). Consequently, you might want to do it again.
At the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

2 Questions - Vertical Menus don't work on Windows but work on Mac

I have made a horizontal menu with vertical drop downs. Then drop down menus work properly in all "mac" browsers, (Google Chrome, Firefox, Explorer, Safari) but they don't work at (drop down) all on my pc laptop using the same browsers. (Google Chrome, Firefox, Explorer, Safari)
Why would they work on one platform and not another? Is there something I can add to my source to fix this?
Also the menu is located above a flash image and on the PC the menus go behind the flash animation instead of on top. It drops down over the flash animation in the mac browsers but not the pc browsers. The Z Index is set to 1000 so that should be correct. Any ideas what's up?
Also, what would be an inexpensive or free menu creator tool to replace Menu Machine? Does Dreamweaver CS4 have a simple menu creator?

So why does the menu appear above the flash animation in all mac browsers and not in Windows browsers?
It's caused by different browsers on various platforms giving a higher priority to flash objects. Also different among update levels within same browsers. For example, Firefox.3.0, Firefox.3.6... Safari 3.0, 3.1, 4.0...
What is "jQuery Cycle" and how do I use this instead of flash?
jQuery is a common JavaScript library. Cycle is a plug-in for making images fade in/out, etc... See the demos.
http://jquery.malsup.com/cycle/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Application's run-time shortcut menus don't work on local drive.

The run-time menus in my application don't work, unless I run the application from the location where it is built. This project has an application build specification, and an installer build specification. The installer specification, copies the app to the local drive. But the run-time shortcut menus do not work when the app runs. Nothing happens when I right click on the control. However if I run the same app from the network drive, where the application build spec builds it, it runs fine. When I have the application build spec build the app directly to the local drive, it works fine. The exe, ini and aliase files are identical. Why does this app run differently depending on which drive it's on? How can I fix it so the run-time shortcut menus work on the target machine? Any ideas?

Hello, I believe that when you create a custom run-time menu it gets saved to a file. My guess is that you are not including this file as part of the build specification for the application. The file likely exists in the build directory but does not on the target directory which is why it no longer works. If that does not fix the problem, let me know and I will see if I can figure something else out.
Regards,
Burt S

Why does the scroll down menus don't work on my laptop at home but work when I'm on my laptop at work?

It's really weird. When I'm on my laptop at home, the scroll down menu appears but disappears in less than a second. When I bring my laptop to work and use the scroll down menus there, they appear and they don't disappear? It's very annoying that I can't use the menus at home, can someone help me?

The two things to try first are renewing your network lease, forgetting the network and if that doesn't work to reset all networks. You might have tried one of these but I'll repeat the steps just to make sure.
Settings > Wi-Fi > tap the blue arrow to the right of your network name > Renew Lease
If that doesn't work then
Settings > Wi-Fi > tap the blue arrow to the right of your network name > Forget this Network
If that doesn't work
Settings > General > Networks > Reset All Networks > then reset your iPhone by
Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart.
I hope one of these will help.

My pop-up menus don't work when I apply them.

I have been working in fixing this problem nearly all day and haven't been able to find a solution. I added a pop-menu in DW, but it doesn't show up. I am new to coding and I suspect it has to be a problem with the hierarchy of the code, but I just can't seem to figure it out. Can someone pleeeeeese take a look at my source code and let me know if you can see how to correct this problem. The .js file is in the folder so I know that's not the problem.
Please please help if you can.
Here is the link: http://www.graphicmechanic.com/DEKALBCOUNTY/LIVING-IN-DEKALB/LIVING-IN-DEKALB.html
The link that I applied the pop up menu to is the "Arts & Culture" link in the list to the left in blue area.
Any advisement that gets me closer to solving the problem would be greatly appreciated!!!!

I believe it's because the code to create/load the menu is wrapped in a <script> tag that actually calls an external JS file, meaning the external code is executed instead of the code wrapped in the tag. You have this at line 62:
<script language='JavaScript' type='text/javascript' src='TE_FontMagnify/yahoo-dom-event.js'>function mmLoadMenus() {
It should be this:
<script language='JavaScript' type='text/javascript'>function mmLoadMenus() {
THen you would need to add this after the closing </script> tag to call that external file again:
<script language='JavaScript' type='text/javascript' src='TE_FontMagnify/yahoo-dom-event.js'></script>

Itunes Toolbar Menus Don't work with Mouse

I moved itunes from my laptop to my PC. Everything works fine except the toolbar menus. I can not access the toolbar menus with my mouse. I have to use the alt key to access the menus.
Suggestions?
Win 7 Sp1
ipad
Itunes 10.3.1.55

I found out WHY this is happening. Evidently there is a bug of some sort in itunes? In Win 7 I have the task bar at the top of the screen. Moving the task bar to the bottom of the screen (the default) rresults in the menus working with my mouse. I do not have trouble with any other program.
Any ideas?

Blu-Ray Motion menus don't work!

Similar Messages

Maybe you are looking for