Blue printing and Test Management in Solution Manager

Hi All,
I have a few questions regarding projects in Solution Manager.
1) We currently have our test cases maintaned in an excel sheet. Is it possible to create same in Solution Manager?
2) Our blueprinting was done outside of Solman. To build the test cases do we have to carry out the blueprinting again? or can we just  upload the documents?
This is my first time, therefore am a bit lost in this.
Thanks,
Savindi

Hi,
You can keep your test cases in excel sheets.  In Solar02, in the test cases tab you'll be able to upload the test cases in xls format or create it.
Regarding the blueprint, there is no way to upload it or use the generated one. I would recommend you to set your whole project
in solution manager and generate the blueprint again.
Kind regards,
Fabricius

Similar Messages

  • ChaRM and test management in implementation projects

    Hi
    I am doing implementation projects in solution manager. i have activated charm in the project so as to transport all the changes related to the project with the project lifecycle.
    I have got confusions regarding CHarm and Test MAnagement.. when we activated CHaRM the tester can logon to the system and perform testing and pass the Change Document to the next phase.
    What is the standard flow when both CHaRM and TEst Management for a project exists??
    Thanks

    Please can someone tell me how to use TEST MANAGEMENT and ChaRM for Implementation Project together??
    Edited by: Hasan Sidra on Jan 2, 2012 11:11 AM
    Edited by: Hasan Sidra on Jan 2, 2012 11:11 AM

  • How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

    How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

    Forgot to add that it would be an adjustment layer with some kind of mask on it already. The mask is uncentered when copy and pasted which throws it off.
    I guess the same question would go towards doing the same for an object. How to copy and paste it over to a new doc, keeping its position within the document? is this possible?

  • AP / AR Blue Print and Config

    Hi Gurus
    I got project where i am responsible for Accounts Payble and Accounts Receivable blue print and Config.
    This is my first time working in blueprint.
    Please suggest me what are the requirements that i need to consider for blue pring.
    For right help points will be assigned.
    Regards
    kp

    Hi:
    For Business print, First understand the business process of the client.
    Ex: What are customer groups the client has i.e regular customers, one-time customers,foreign customers and domestic customers.
    what is the credit limit of each customer?
    what are discounts,terms of payments,dunning that are maintained by the client.
    For Configuration.refer to SAP Best pratices.
    http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
    J03: Financial Accounting
    Additionally refer to this website
    web.mit.edu/cao/www/AR/index.html
    help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBP/FIBP.pdf
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • Business blue print  and requirement gathering

    MODERATOR:  All points have been UNASSIGNED and the thread LOCKED.  Please do not share email addresses or links to SAP copyrighted information on these forums.  If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email.  Than you for your assistance.
    Hi friends till now i have been on production support.I am moving on to implementation side on another project.I would appreciate if somene can send me documentation on information gathering from client.
    my email id is :[email protected]
    Thanks in advance
    sandhya

    HI Shasikanth,
    could plz forwrd me business blue print and requirement gatering documents..to this id...[email protected].
    thanks in advance
    regards
    JK

  • Printing and Client Management

    I have an HP printer that needs a specific driver. I have it setup on the server and managed by WGM.
    When I try to print, it uses the generic driver and prints all goofy. Prints just fine from the server. All machines have the driver installed.
    I have some printers on the admin side the user is also pulling/seeing.
    Is there a way to prevent the users from seeing the local account printer and use the correct print driver?
    Running 10.4.9.

    Hi
    You can try the method suggested in the other reply but it is this sort of problem you get if you configure the Print Service from a client with the Admin tools installed. Its best done from the Server. However if you have already done this then there is nothing else I can add.
    Tony

  • Printing and color management

    I have an old all-in-one HP printer and decided to print a few pictures. Unfortunately the printouts look washout compared to what I have on the screen. I thus went into colorsynch utility and tried to figure out how to set my printer for prints that look like my screen... Did not work out well. I am using Adobe Illustrator...
    Could someone tell me how colorsynch works and how to get, in general, printouts that look like my screen? Is this linked or separated from Adobe suite?

    Have a look at this posting and in particular the responses from Kurt Lang. It should answer your question.
    http://discussions.apple.com/thread.jspa?messageID=5181894&#5181894

  • A "HP Twain Scan" function in the "Print and Scan Doctor" app - Solution?

    Frustration!! Why can't I get the scanning portion of subject printer to work on my laptop Windows 7 (64-bit)!?? I've tried the Print and Scan Doctor several times, and the same dysfunction says "HP Twain Scan" whatever that means or is? I've pulled out the cords, all of 'em, and it still not helping.  Did I purchase a printer that is not compatible with my laptop? As far as the scanning portion is concerned, or what?  I can print OK, both from website/emails and my own documents.  I do a lot of scanning (photos mostly), and so this will be a sad problem.Hoping someone out there in techland can give me a solution. Thanks!

    Hi , Welcome to the HP Forums! I understand that you cannot scan with your HP Envy 7645 on Windows 7. I am happy to look into this scanning issue for you! Some questions for you: Are you able to make copies with the printer? Copying Documents or Photos with an HP ENVY 5640, 5660, 7640 e-All-in-One, HP Officejet 5740 and 8040 e-All-in-One Printer Series.How is the printer connected? Wireless, Ethernet, or USB? In the meantime, please try the steps within this scanning guide, A 'No Computer Found', 'Connection Required', or 'Scan Unsuccessful' Message Displays for HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e-All-in-One Printer Series, and let me know what happens! Hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • Need SAP-HR Module wise Blue prints and Real time questions

    Hi HR Team,
                    can u send me the OM issues and real time questions and any HR module Questions and Blue prints .pls if useful awarded points
    my mail id is [email protected]

    Hi HR Team,
                    can u send me the OM issues and real time questions and any HR module Questions and Blue prints .pls if useful awarded points
    my mail id is [email protected]

  • Business Blue print and Technical spec?

    Hi
    Can any one please give an idea about Business Blue print? that is how the Business blue print should be prepared, please explain it with an example, and provide some links, pdfs which will be helpful in preparing Business Blue print?
    And, How do we derive Technical Specs from Functional Specs? who gives us the Functional specs? also try to provide links/pdfs etc.
    Points will be given
    Gan

    Hi Gan,
    Check this post:
    /message/1447350#1447350 [original link is broken]
    Bye
    Dinesh

  • Attempts to wrap my head around printing and color management.

    So, I've been meaning to get (more) serious about printing my shots. It's the summer and I now have some time.
    I know I've got the first piece of the puzzle in place. I have an i1 Display 2 that I use to calibrate my monitor - my MB + one of 2 Dells using either or TN or P-MVA panel. I try to use the latter more.
    I've viewed the image with different monitors and lowered the brightness when 'soft proofing' with Canon's profile. It's the best I can do being that I don't own a spectrometer.
    Anyway the result on my screen was so incredibly different. The black was grey. I lost shadow detail. And it just looked flat. I tweaked it a bit but it didn't help.
    I decided to test print using the Canon Photo Plus Glossy paper I had. I set the ColorSync Profile box to the profile I soft proofed with. The result was horrible!!!! Incredibly dark and ugly. It however wasn't grey or very flat - though it was so dark.
    I tried again with the colorsync profile set to system managed. This produced a result darker than the screen, but not grey like the profile. Sort of an average between the screen and profile. Much better but still not great.
    Then I ran out of paper and couldn't try anything else.
    So here's the technical info if it matters:
    I'm using a canon ip5200 with 3 fresh inks. The other 2 are fairly recent and not used too much.
    The paper was Canon Photo paper plus glossy
    The photo was a sports shot with a heavy dark vignette I think a more even shot would be easier to work with. However, the dark vignette with blonde flying hair looked great. (Who says sports can't be artistic?- I love the vignette to for some shots!)
    So what exactly is the ColorSync Profile menu in the print window for?
    What am I doing wrong?
    PS: Sorry if this is a repeat, but the search function is down.

    Sorry to be the bearer of bad news but there are some seriously weird stuff going on with printing with Aperture and 10.5 I would not have believed it had a number of my clients and friends not experienced the same kind of issues that I personally walked through and witnessed.
    I can give some general advise in terms of helping to resolve your issues. By all means update to 10.5.4 do a repair permissions on your drive, make sure that you reinstall the latest greatest printer drivers for Leopard downloaded from Canon, and wave some chicken bones over your system.
    You may also want to trash your Aperture prefs and Printer presets and start from scratch. (if you do not know how to do this hit me back)
    Then give it another try - make sure that you turn off color mgt in the printer prefs dialog, select the appropriate paper and then select the corresponding profile in the aperture print dialog. (Have heard reports that if you do not turn the color mgt off in the driver the option becomes unavailable after you select the paper profile in Aperture but does not turn it off - cannot confirm)
    Hope this helps.
    RB

  • Photo Printing and color management

    Using a Epson Stylus Photo 2200 printer on 10.5.1. Looking how to turn
    of color management. Getting a pink hue on my prints. Past experience is color management is getting in the way in the driver. Looking through the epson online docs, what I see on screen does not match with the window menu picks for the epson utility. Checked printers in system preferences/drivers nothing to turn off there. Any thoughts on turning this off?
    Thanks,
    The new guy with his first MAC.

    Having turned off the Epson colour management, you need to ensure you have selected the correct colour profile in CS3. It helps to calibrate your monitor correctly and use a profile designed for your printer / paper / ink combination to ensure what you see on the screen is what feeds out the printer. Paper brand can make a startling difference. There are companies that offer a profiling service. You print out a pecific photo / pattern from their provided file and send them the print on the ink / paper you use and they email a profile.. Google will find these companies for you.

  • Wish to move auto cad drawing to adobe illustrator. Wish to take blue print and layer it for viewing.

    We have our drawings in auto cad and need to move them to adobe illustrator  and layer the drawing  for viewing on a web site.

    You can import certain versions of DXF/DXW files into Illustrator and also edit them.
    If this can be done efficiently depends on the nature of the files (number of paths etc.)
    You could download a trial version and try it on your files.

  • Need Questionnaire for WM blue print preperation

    Dear Experts,
    I need a Questionnaire for SAP WM blue print preperation.These questions will help me analyze the requirements and prepare blue print for warehouse management system.
    Thanks in advance

    Hi Madhu,
    Could you please forward if any document you have on the same topic.
    Your expalanation and examples are very good on this. But I could not see the diagrams you mentinedin that.
    If you have any document on the same topi,could you please forward the same to my ID.
    I appreciate your help.
    Regards
    Sreehari

  • Blue print for DP-APO

    Hi All,
    Can anyone please send blue print and any good pdf's for DP  to my email id.
    [email protected]
    I will assign the points definitely.
    Thanks,
    Rakesh

    Hi Rakesh,
             You can find the information on DP in our WIKI (https://wiki.sdn.sap.com/wiki/display/SCM/Main) and also check the below link.
    http://help.sap.com/bp_scmv150/BBLibrary/HTML/BBLibrary_EN_DE.htm
    Regards,
    Siva.

Maybe you are looking for