Blue tooth adapter

I have bought the Tobisha Satellite L755 and now have also purchased the bluetooth attachment for it as I have a Kodak All in One printer, which I needed to buy it's bluetooth attachment from Kodak. My computers seems to be okay, but cannot print at all. I have tried everything so now need help from someone....
When i pull up the file transfer it does pick up my printer, but even then I cannot send the file....
I'm ready to give up as I have now wasted my monies on purchasing 2 bluetooth products and nothing works.
please anyone
Thank you
Tuula

Because it's detecting the printer, you know the Bluetooth is working. I'd recommending contacting Kodak support.
- Peter

Similar Messages

Blue tooth adapter finder

I have Pavilion g6-1301TU but i am unable to find the blue tooth adapter . Can you please confirm if this model have one and if yes how to find ...the box info says it has WLAN and Bluetooth

The official specs say it does have BT:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03135758
Open up the Windows Device Manager and see if you have a bluetooth device listed there. Also do you have the HP wireless assistant installed? It should give you wi-fi and BT status (on or off).

Missing blue tooth adapter

Good day,
On my Pavilion dv 9000 with windows 7 64 I have the following problem:
When I try to switch on my bluetooth with the wireless assistant, the system reports that blue tooth is switched off.
I have searched the microsoft system settings but nothing concerning Bluetooth pops up.
I also don't find anything under Networksettings.
As it was working before it should be there.
My wireless internet is working normally.
Thanks Rob

Please visit www.hp.com -> Put the product number of notebook computer in the search tab -> in the following page tyou would get a link for software and driver downloads->look for bluetooth/network adapters -> download and install them. Then check again if the issue persists.
I work with HP. I am not Official Spokesperson.

Blue tooth adapter not working, is it built in or not?

Thanks so much Paul_Tikkanen , Really appreciate your taking time to help me. Much appreciation! Anyway you answered my question on Bluetooth that it was not a feature that came with product at that time of purchase. And the suggestion was helpful though I was aware of ability to purchase an external one and I was reading somewhere on HP support site that it had to be an HP product! So you helped me saying and verifying that any good brand of them would work and even gave me a link. Shame on HP for hiding fact that this computer did not have BT. It should have been volunteered on spec sheet. That would have saved me all this time. Anyway the reason I came to forum to try finding internal Bluetooth capability was i didn't want to have a USB slot (usb 2) taken up as I have a logitech mouse USB dongle already taking one slot ( usb 2). That leaves only 2 slots left (usb 3) One where I plug in external drive and camera, etc in the second one . Also didn't want an external 3.0 hub to carrry around. Anyway thanks on that issue. I will have to get an external one now that you verified the fact one is not built in. On the web cam issue, how can I get help on this to verify that it is phisically broken and laptop needs to be shipped back to HP? and how would I do that? Contacting HP without signing up for service and paying just to speak to them about it? Can you help me with that info if you work for HP? Thanks again for all your help. Have a Great day! Frank H

I have a HP Pavilion dv6 computer where the built in webcam use to work but recently does not. Looked up solution online and arrived at a site that said the webcam may be broken or disconnected and that I had to send back to HP for repair. I could buy an external one but I'd like the built in one to work as there is nothing extra to carry around. How can I verify and fix this? HP wants to charge just to speak with someone live. That is crazy since it's just a question on how to send back to HP for repair and find out cost. I just need to verify if hadware disconnected or not. How can I contact HP to fix without signing up and being charged just to speak to them? Thanks, Frank H.

Ipod classic blue tooth adapter?

My car has Lincoln Sync and I would like to connect my ipod classic to it using Bluetooth. What adapters are available?

http://www.amazon.com/KOKKIA-Transmitter-authentication-capabilities-generation/ dp/B003BWERF8#

Will apple ever support blue tooth 4

will apple ever support blue tooth 4

Then you would need to add newer hardware to your older Mac
http://www.amazon.com/IOGEAR-Bluetooth-Micro-Adapter-GBU521/dp/B007GFX0PY#
You cannot magically support features on hardware that was not built with them. The actual wires and chips need to have the features. You need a newer BT chip.

TA24778 iPad - dropouts when streaming music via blue tooth to sound devices (Boom Box etc.).

Hello,
I use my iPad as a central music store.
But -when trying to stream music via Blue Tooth I get dropouts all the time.
It doesn't matter how far away I am, or where I'm using it. It gets a bit better when deactivating the BT Keyboard (yes, shame on me, I'm using the old style way to hack text into the Pad...), but I still get dropouts.
I checked everything, batteries are fully loaded, dis- and reconnect several times, reboot, etc.
On my devices (Logitech adapter for my home-hi-fi, Soundbric) I get the same result.
Any Ideas?
(Sorry - I can only choose "Using iPhone" as category, although I chose iPad first... Do I need to understand this?)

I'm not sure what you mean by "mixed with audio in Alsamixer". Can you clarify?
With that said, my problem did mysteriously fix itself after some update (presumably to alsa). Unfortunately, I noticed it in passing one day while I was changing the volume of something in pavucontrol, so I don't remember the exact update that caused it to work. But yes, my current setup does work now: I can listen to audio through my DAC and use the Yeti for recording. However, I have found that use of the Yeti crashes Google Hangouts, although it works perfectly in every other program I've tried.
As documentation, here is my current working setup (it is very similar to the above): in PulseAudio, the DAC is set to be a Digital Stereo (IEC958) output. The Yeti (called an 'Integrated Rate Matching Hub' in pavucontrol) is set to be an Analog Stereo Input. In the input devices section, I have the Yeti's volume set to around 58% (-14.31 dB), which is past the base volume a fair ways but produces decent levels for recording. The DAC's volume is set to 100% (0dB gain, the DAC takes care of the level). In alsamixer, I have the mic level for the Yeti set to 40.
Edit: This is a long-time-later edit, but let me say that when you have multiple USB audio devices, what USB hub and in what order they are connected seems to matter a great deal. If you can't get your Blue Yeti to work, try moving it to a different set of USB ports (controlled by a different controller) on your motherboard. This magically fixes the issue for me.
Last edited by rwiggins (2014-12-14 00:26:39)

Which blue tooth device works the best withe the Iphone?

Ok, I have spent a lot of time reading about the blue tooth devices and I am confused. I do have my $100 store credit to spend ( but dont HAVE to use it for that) so I am wondering....what blue tooth device is the best? The Jawbone, Apple, Motorola ( heard they have a new H12 thats great)....so any comments? Thanks in advance and Happy Holidays.

I have the Apple Bluetooth Headset... I gave it a 3-stars out of 5 rating. It is really tiny which makes it easy to carry in your shirt pocket or wherever. But, it doesn't fit in my ear well.. had to pick up an adapter that lets it plug into the ear canal.. much better. Also, it's slow to answer a call and no noise reduction for your voice (background noise goes thru to your phone-partner.)
My sister has a jawbone and really likes it. Many others on this forum have recommended the jawbone as well. It's physically bigger, but apparently sounds really good and kills the background noise that your recipient would normally hear.
Jim

Blue Tooth Printer can U hv w/ L355D-S7901 + key board is not hinky

I can't find in the spec's where this laptop is blue tooth compatable, does anyone, know...'cuz I am really tired of running downstairs to print. Have HP C5550
Also, this keyboard is typeing very hinky, like have to type like a 2 year old 'cuz it does't pick up all the letter. Very annoying, any suggestions, other then another $1,000 for a new laptop?

Satellite L355D-S7901
According to the specs above, there is no Bluetooth hardware in that computer.
You can add it.
Toshiba Bluetooth USB Nano Adapter
-Jerry

Blue tooth head set for music

hi anyone know how to make a blue tooth head set work for the music in the iphone? I have the new motorola ((( S9 ))) the phone side of it works well but their is no music side of it.
on Motorola's web page. it say's the phone has to sapport ((( A2DP ))) to be able to stream music.
dose anyone know if the iphone has sapport for it or will or willnot so I could return my headsets or keep it for latter.
can sapport for advanced audio distribution profile be added in an upgraid or is it hardwear that can not be addedd.
any help or advice is welcomed
ps is there anyway to conviced apple to add this feature

It's all a matter of priorities for the first release. The iPhone was a HUGE undertaking. A whole new adaption of OSX (sounds like they are using a lot of Leapord in there) on a whole new processor, every app is rewritten for a finger-interface, etc etc.
I'll bet you'll see streaming music/audio VERY shortly possibly end of the month when they start shipping the Apple Bluetooth headphone.
Jim

Charging my blue tooth with the car charger?

I have a blue tooth that I keep in the car and I also bought a car charger.
Unfortunately, I can't recharge my bluetooth in the car.
Does anyone know of an attachment that will make it possible for me charge it.
Thanks
Maggie

Since the BT headset comes with the dual charge cable, try this:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=4FC F984E&fnode=home/shopiphone/iphoneaccessories&nplm=TN787LL/A
Its a USB cigarette lighter adapter. Just plug your dual cable into it and you're go to go.
BTW, it is compatible with the iPhone so it meets the correct power standards.

Installing Blue Tooth Mouse after Tiger

I just upgraded to tiger with an iMac G4 17". I had previously installed a bluetooth USB adapter for my wireless mouse. Now, with Tiger, everytime the computer goes to sleep or screensaver, the blue tooth connection to the mouse is lost and when the computer is turned on, it tries to find the mouse. Any reason for this? How can I get it back so the mouse is always installed and doesn't lose connection? Thank you

There is one standard rule about OS X. It changes a lot with each major update (full .1 ) and messes with drivers. Go to the site of the mouse manufacturere, and see if there's an update, or a fix.
I have a standard rule, since OS X. NEVER use the driver that comes with a device. Do this:
1. Try the device with no software, first. This si successful for almost all devices.
2. Go to the site and download the driver. Why? Think about it. The box you buy is probably two months old by the time it hits the shelf. That's plenty of time for many bug fixes, and an update on the manufacturer's site. Mkae sense?
Sorry for the rant.

What do I need to buy in order for my iPod Classic 160GB to connect with my blue tooth speaker

What do I need to buy in order for my IPod Classic 160 GB to connect with my blue tooth Ultimate Ears Boom speaker?

Upgrading RAM and your HD will give you some performance gains, but depending on what you are doing, it may not be enough. Your best friend will always be processor speed. This has a direct relation to how many cores and the speed of the RAM.
However, if you are unable to spring for a new computer, then the options of running more RAM and a biggger, faster HD should ruduce some bottle necks.
Here is a site where you can check out what your computer can handle http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade They have some charts comparing speed gains with various components.
Are you using the track freeze option to manage the track count and subsequent demands on your machine?

HT1689 my ipad mini retina display is disabled. I believe I know the cause. I packed it with my blue tooth key board in my back pack. The key board likely entered various keys and the ipad believes these entries were invalid password attempts. I am tr

my ipad mini retina display is disabled because my blue tooth key board made number key entries while in my back pack. How do I re-enable?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Loss of Blue tooth function after upgrade to 10.6

I have a MacBook Pro... I also have a Motorola Droid that was working perfectly with blue tooth when I was using OS 10.5 etc... I was able to "Browse" my phone, Transfer files, it worked like a dream. After upgrading my OS to Snow Leopard... I am unable to transfer files or do any thing of any value using the blue tooth connection on my computer. When I attempt to "Browse" the phone I get the message "The Device does not have the necessary services" I have searched the forums for help with this issue... I'm seeing a lot of "your phone doesn't have that capability" or "your provider has disabled that to make you pay more" or worse yet... I've seen things like "blue tooth isn't made for file transfer it's only for headsets and headphones.
Admittedly most of the people posting these questions had never been able to browse or transfer files before and were just now trying to make this work. I on the other hand had been able to use all these services. Which is why I am not considering my phone as the source of the problem at this time.
Nothing has changed on my phone "no updates in software" and the only change that was made is going from Leopard to Snow Leopard. This is leading me to the conclusion that there is something I'm not seeing in 10.6.x that has caused an issue with my blue tooth functionality... I have gone in to system preferences, in to file sharing and enabled sharing in bluetooth... I have also tried to delete the Bluetooth plist file as was suggested in other discussion forums.
This has not changed any thing I still get the same error when trying to transfer files or browse. If any one else has any advice on something I could try to return my bluetooth function to Pre10.6 that would be most helpful... I'm aware of work arounds "Emailing my self,,, etc." I'd prefer to have my bluetooth back.
Sorry if this post sounds harsh or snippy... I'm getting very frustrated.

Is it smarter economically to repair replace the board, or use the computer as it is and purchase a replacement?
This depends on your usage. If you find performance with 1GB to be satisfactory (maybe not optimal, but satisfactory), just keep using it as is. A new logic board (which will likely be used or refurbished depending on the source) is $400-$800 plus installation. I don't know what company's charge to repair the logic board.
If you decide to go with a new system, you can sell your current system to offset the cost. Or just keep it as backup/extra/computer, or give it to a family member who can use it. If I were going to give it to a family member, I'd reinstall Tiger, as it probably will work a little better in 1GB than Leopard.

Blue tooth adapter

Similar Messages

Maybe you are looking for