Bluetooth: A2DP. Which codec is used in iOS4.3

Hi,
does anybody know, which codec is supported for BT A2DP streaming?
SBC (default)
AAC?
MP3?
apt-X?
Br
Timo

Then again, this is from the JBL press release :
The JBL OnBeat Xtreme iPad dock supports advanced A2DP and AVRCP Bluetooth profiles for interference-free operation, and uses the higher-quality AAC codec – supported by Apple’s iOS devices, gaming consoles from Sony and Nintendo as well as Android smartphones – for superior audio streaming.

Similar Messages

  • How can I determine which codec to use?

    I'm using PE7 on a PC. I have HD video shot with a Canon. Each video - there are six of them - is less than five minutes. After I finished editing, I uploaded them to youtube and emailed a link to my client, but my client complained that they were out of focus. I explained that it was the compression that youtube uses, and that I'd render them to disk for him to look at.
    Trouble is, I can't figure out which codec to use. All I know is that I want clear, sharp video, suitable for posting on the net. These are scientific videos, showing some chemical processes involving gasoline with ethanol and water.
    Can someone point me in the right direction?
    TIA

    I guess I need to explain better. The HD videos I'm editing will not end up on youtube, but will be posted on a government agency's website. I originally posted them on youtube just so the client could take a look without me having to attempt to email large video files or burn to disk, since the client is in a different location from me.
    The area of video editing and production that I'm the least knowledgeable - and therefore the most insecure - is when I attempt to render and save a video. Every video project I go through the same frustration of having a project that I'm happy with, but having a final product that either 1) does not look at all sharp or 2) results in a file size which is too large. In this case, since the final video files will be posted online, they need to be small enough for viewing over the net while maintaining enough sharpeness and quality that the video does not look out of focus.
    If you take a look at this video, for example: http://www.youtube.com/watch?v=t_X0IKPJrng you can see why my client thought it was out of focus. However, I know that the original footage is very sharp.This link is only temporary, as I've already been told that the agency I work for will not allow them to be posted on youtube.
    So, my question is, when I'm rendering and saving a video project from PE7, how do I know what settings to use for the highest quality, yet smallest file size? The manual does not go into much detail about the pros and cons of various codecs, nor does it say much about what settings do what. It's like Adobe expects me to already know this information.
    Is the problem with the video above simply that youtube compresses the videos I upload? Is Vimeo a better site to upload videos and maintain sharpness? In PE7, is there a way to set it up to upload to Vimeo, or should I render and save as an MP2 or MP4 file and then manually upload?
    Surely there's a site which goes into much greater details about the various settings I can use in PE, and how those settings affect the final viewing product.
    Thanks a lot for your help. I realize my questions show an extreme lack of experience, but that's why I'm here, right?

  • Find which codec is used?

    How can I tell which codec is being used for sound in an avi file.  I have problems playing some avi's in VLC.  The sound is crackly.  Other files are fine so I figure there is some encoding difference I wanted to track down before I reported a bug.  Totem plays the files fine.

    btw...
    theres a command in linux that can be used to get info from any file, its called file
    file /media/Files/Download/movie.avi
    /media/Files/Download/movie.avi: RIFF (little-endian) data, AVI, 640 x 272, 25.00 fps, video: XviD, audio: MPEG-1 Layer 3 (stereo, 48000 Hz)
    as for your other problem, could it be a problem in the video instead of vlc?

  • Workflow question - which codec to use?

    Starting a project and want to get a quick check before I possibly do something really dumb:
    • Shooting on Canon t2i, importing footage off cards via Image Capture
    • Taking the resulting .mov (h264) and converting it in compressor to Apple Intermediate Codec (AIC)
    • Edit AIC files in Final Cut Pro 6
    • Once editing complete, make all clips Offline and reconnect original H264 files
    • Render out Final project to self-contained file
    • Final color correction in Color
    I'm a bit rusty in the video production arena and this is my first project shooting on a t2i. I am a bit unsure about the codec situation and finishing editing with the smallest amount of transcoding. I tested a few codecs and I found AIC to be the fastest and easiest to edit with minimal file size, but I have never used it before. Should I just convert the footage to ProRes and be done with it? I'm expecting a high shooting ratio on this project, so I would like to utilize an offline workflow if possible without crating a bunch of headaches down the road, though with drive prices what they are now, it's not a big deal anymore. I'm really just want to edit as quick as possible (minial rendering utilizing RT) while maintianing good quality (I know the client will be worried if I presented them a 50% quality Jpeg version of the current edit).
    Mac Pro 8-core 2.26 w/ 24GB RAM and 3 drive 3TB Internal RAID

    Thanks Mr. Ross and Mishmumken for the advice, will definetly do the ProRes route. A few final questions though:
    1. I watched the tutorial link a few times which was helpful, but am still fuzzy as to why I need to ingest via FCP. Is there anything wrong with importing from Image Capture and using Compressor to get the footage into ProRes? I see the positives about it, logging the clips, trimming the fat, having it all in the program, avoiding compressor, but does my original method cause any degradation?
    2. Can you elaborate a bit, not sure what you mean by Roundtrip and what do I need to prep?
    mishmumken wrote:
    Just roundtrip your timeline but make sure you prep it before sending to Color: there are limitations ....
    Thanks again guys, you have been extremely helpful and probibly saved me a lot of future problems!

  • Uploading movies / which codec to use?

    I want to upload various clips to a .mac site. iWeb says that they should be under 10Mb which seems pretty tiny to me and I would rather not compromise on quality too much if I can help it. Using FCP what is the best codec / QT version to use to publish movies?
    Plus... ideally I'd like them all on the same page - is using a photo page the best way to do this? Otherwise it seems to take an age to watch anything.
    Lastly, does it make a difference whether the files are on my desktop or on my idisk? Does the latter improve the streaming speed that people can watch movies on iWeb?
    If anyone can shed light on the above it would be much appreciated!
    Thanks!

    Publish for Web (.m4v) is a good idea.
    does it make a difference whether the files are on my desktop or on my idisk? Does the latter improve the streaming speed that people can watch movies on iWeb?
    Yes it does. Local files load extremely fast. Which is rather useless, since no-one has access to the files.
    Files on a server are dependent on the connection speed of the visitor.
    As far as I know iWeb only suggest to use smaller files. Can't recall that iWeb prevents uploading larger files.
    These pages contain movies from 19-23 MB:
    http://web.mac.com/wyodor/CorinneBaileyRae/
    If iWeb does prevent large files, upload a small one and replace it with a larger one on the server.
    Or use the HTML Snippet to embed movies.
    http://web.mac.com/wyodor/iFrame
    http://web.mac.com/wyodor/Ajax
    Lots of options.

  • Which codec to use for editing AND motion graphics (ala Final Cut Studio)?

    I have a prosumer-level AVCHD camcorder (Panasonic HDC-TM700) and am working with Final Cut Studio. After doing a great deal of research it appears that there is NO real benefit to using any codec other than ProRes 422 for straight editing (a camera at this price point doesn't shoot images of a high enough quality to warrant using 422 HQ, which also requires more processor power, and not only does 4444 require rendering it also takes up a ton of space). However, I have read (many times) that there may be some benefit to using 422 HQ if I am doing motion graphics work (ala Motion 4). Can anyone verify this? Would it make any discernible difference when shooting with a camera like this? Even though it is a prosumer camcorder I am trying to squeeze as much value as I can out of the entire production.
    Any input or advice?
    Thanks!

    Please don't double post.
    http://discussions.apple.com/thread.jspa?messageID=13122088#13122088
    x

  • 480 vs 486, Boadcast Quality ?  which codec to use

    I have a Sony DSR 20 connected to my machine via fire wire. I am editing something that may be broadcast in Standard Definition. Is that 720 x 480 or 720 x 486 ?? I have to lay it off to a BETA SP tape.
    my machine is a Dual Processor G5 with a 128 mb graphics card(ATI) and 2.5 gigs of RAM. I am editing with the extra internal drive that I put in which is a SEAGATE 400 Gig drive with the extra ram buffer
    I would rather not edit in DVC PRO 50 because I am worried that my stuff can't handle it.... but even DVC PRO 50 still has 720 x 480 as it's standard..... so why do I need to make it 720 x 486 ??? in case it's broadcast will it be screwed up if it's 480????
    Dual 2.3 G5   Mac OS X (10.4.9)   former Creative for Apple, also have laptop powerbook G4 12"

    If your material is 720 x 480, there is no way you can add those 6 scan lines, which fall into the normal blanking area anyway.
    I'm not a huge believer in uprezzing footage from one timeline to another, butsometimes it's useful. In your case, you would benefit by doing your titling/graphics work in the dv50 timeline. It won't do anything for your basic image quality, but the titles will look better.
    DV 50 should work just fine on your machine (the G5)

  • Questions about which codec to use

    At my new job, there is a server full of RAW video files that I will need to use in the future. These were all imported with an iMac through iMovie and are in .mov format with ICOD codec. I have found that PCs can't read ICOD codec, and there is no way around that. I just discovered Compressor on this iMac and was thinking that I could change the codec into something a PC can read.
    What codec would be the best choice for me? This is all high definition video, and I would like to retain the quality of the originals. File size doesn't matter.

    I believe that ICOD is just another descriptor for Apple Intermediate Codec. That's obviously proprietary to APple and is sort of obsolete – used in FCE, for HD material. (I didn't realize it was still used by iMovie.)
    Pro Res is a better codec for editing and is virtually lossless. If the PC folks have (or download) the Pro Res QT
    Decoder they could play it. But PR files are very, very large.
    If you edit these files into something finished in whatever NLE you want to work in, you could always export as AIC and convert in Compressor. I imagine the PC would be perfectly happy playing an h.264 MP4. It should look good and the file sizes will be much more reasonable.
    Try a short test to verify.
    Good luck.
    Russ

  • Which Codec to use for editing?

    Hi everyone.
    I have some rather large uncompressed files which premiere pro is struggling with. The files are only 2:20 seconds long but are 20GB in size with a data rate of 1244163kbps. My computer can play them but it's not smooth. Seeing as I'm going to be adding effects and working on different video tracks I figure it's a good idea to encode this footage before editingh with it in Premiere.
    So I'm wondering what's the best codec and wrapper to encode with for editing? Any help is greatly appreciated.
    Thanks
    Kevin

    At this point, yes it's just for editing.
    The free UT codec is another good choice, but it's 8 bit only.  It is lossless, though, and does play fine in a couple of media players.
    http://www.videohelp.com/tools/Ut-Video-Codec-Suite

  • Which codec to use?

    Amazing when you think you just got it down... lol you don't.
    I shot some fotoage with the Panasonic HVX-200 camera at 720P. Imported it into FCP using sequence settings of DVC PRO HD 720P60. Is this the correct settings I want to use to import and edit this material? And why not the APPLE PRO RES 422?
    Thanks

    Because when you import P2 footage from the HVX-200, it comes in as the format it was shot...DVCPRO HD. That is a lossless transfer. What you imported is what you shot, and is the proper format to edit.
    You cannot import that as another format. The only tapeless formats that allow that are AVCIntra, and AVCHD...because there is no native support in FCP for those formats. There is, however, native support for DVCPRO HD.
    Shane

  • Which codec does itunes encode its films and videos in?

    can anyone tell me which codec itunes uses when you buy a movie from itunes, I have been told it uses H.264, can anyone please clarify this.
    thankyou

    http://en.wikipedia.org/wiki/ITunes#Video_support

  • How to tell which codec

    I have an .avi movie that Premiere imports only as audio and not video. This video plays also bad on Windows Media Player or Winamp (same problem, only audio), but plays well on e.g. All Player. So it is probably a problem with codec, which only All Player read..
    So I have a question: how to recognize which codec is used? I thought avi is just avi, but found out on these forum that more people had this problem and the solution is always: bad codec. Is there a method/program that would allow me to check which codec was used for this particular video ? Unfortunately All Player does not show information about codec, only size and fps of the movie. So what I think about is a program that would open the clip and recognize which codec was used and display this information. Is there such a program? All I want to know (for now) is the name of the codec. Knowing the codec, it will perhaps be possible to re-code in some other program to a format suitable for Premiere..

    Does it open with Quicktime? If so, in the Quicktime window, under the window menu or control + j, choose "show movie properties".
    I've had this same problem (audio, no video) with files brought to my PC from a Mac that are encoded using the Apple Intermediate Codec.

  • Which codec do you use?

    So I figured I asked the community and get a feel of which codec(for Quicktime) you use when rendering from Shake and why?
    I'm trying to find a nice balance between quality and size for importing Quicktime movie into iMovie. It seems I can't get the right quality in iMovie but maybe it's because iMovie is messing with my original movie.
    Thx.

    Sorry I wasn't as specific. I am using sequence TIFF images which are 720x480 or less depending as input and want to ultimately build something with iDVD. I have been using the 8-bit uncompressed codec to keep as much quality as possible but I was just curious what other people use when doing their work with Shake.
    As for using iMovie, I could do everything in Shake including the audio sequences but it's so much easier to line up audio clips in iMovie. I may resort to this as iMovie keeps murdering my resolution. I just didn't feel like dropping $170 on FCE or even more on FCS which is why I was using iMovie to build my movie. Based on a lot of investigation earlier this year, I could do all the work I wanted in Shake without needing FCE and just output to iMovie 09. I'm just a hobbyist.
    Thx.

  • What kind of video format and/or codecs are used in Health & Fitness (app which come pre-installed in Windows 8.1)?

    Hello.
    I need any official information regarding what kind of video format and/or codec is used in Health & Fitness app.
    Also might be helpful to get a link to resource with officially available (downloadable) drivers and/or codecs of video format which used in Health & Fitness app.
    Thanks.

    Hi,
    Yes, the right place to ask this kind of question is following forum:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1_pr-winapps
    Alex Zhao
    TechNet Community Support

  • Which codecs (e.g. for MP3 etc..) are installed and/or used by MediaSource 3 o

    Which codecs (audio or video) are installed and used by MediaSource versions 3.30.2 and 5.0.38?Is that information provided in the MS application anywhere?I checked under Device Manager | Sound, video and game controllers | Audio Codecs (Video Codecs) ..but I don't see any?specifically from Creative e.g. like ctmp3.acm which some other people see. I see no codecs (either audio or video) with name? ct**.** in those codec lists. I see the MPEG Layer-3 Audio Codec Version .9(Build 305) .. but what application installed it ? WMP ?Is that the codec used by MS for MP3 encoding and playback?- Mitch?

    Yup.
    Here is a way you could solve this by adding an extra column and a small lookup table:
    The lookup table is here for the copying:
    0
    1
    k
    kilo
    2
    M
    mega
    3
    G
    giga
    4
    T
    tera
    5
    P
    peta
    6
    E
    exa
    7
    Z
    zetta
    8
    Y
    yotta
    In table 8 (the one on the left in the image) column A is where the values are. 
    B1=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
    this is shorthand for... select cell B1, then type (or copy and paste from here) the formula:
    =A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
    select cell B1, copy,
    now select all the cells in column B, paste

Maybe you are looking for