Bluetooth fails after abnormal shutdown - needs constant reinstall.

This is something that has plagued me with my previous Tecra. I am using a Terca M10 and have had a lot of problems with Windows XP preinstalled (because it came with a lot of undesirable stuff).
The bluetooth manager stays red which means that it is not working.
I have to uninstall and reinstall the bluetooth stack time and time again.
And even when it is working I get the following message in the Event Log:
The application-specific access security descriptor for the COM Server application C:\Program Files\Toshiba\Bluetooth Toshiba Stack\TosBtSrv.exe is invalid. It contains Access Control Entries with permissions that are invalid. The requested action was therefore not performed. The application set this security permission programmatically; to modify this security permission contact the application vendor.
Can anyone help me solve this issue.

Double-click the event entry in Event Viewer and then click the Copy button on the right to put its details on your clipboard. Paste that without editing into your reply, and tell us whether it's from the Application or the System log.
Which Tecra M10?
-Jerry

Similar Messages

Is there a fix for Bluetooth failing after 1-2 hours of play on my remote audio speakers? It sounds like "gargling". It occurs with all bluetooth speakers and quitting and restarting bluetooth is the only remedy I've found. Others?

Is there a fix for Bluetooth failing after 1-2 hours of play on my remote audio speakers? It sounds like "gargling". It occurs with all bluetooth speakers and quitting and restarting bluetooth is the only remedy I've found. Others?

8-doing a factory reset, then repeating steps 1 through 6
Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

Cannot log in to Mobile Manager after abnormal shutdown (issue & solution)

After an abnormal shutdown of database, an attempt to log in to Mobile Manager as Administrator fails with the error "Please verify your username, password and try again!"
I had a power outage in our office and our development server shut down abruptly as a result. When power was restored, the database, listener and GlassFish Server started up automatically (init.d and rc.d), but when I attempt to log in as Administrator using Mobile Manager, I get an error "Please verify your username, password and try again!". I did some research and after some trial and error, figured out that the services must be started in this order (this may not be guaranteed in automatic startup scripts?):
1. Oracle Listener
2. Oracle Database
3. Oracle GlassFish Server with Domain
If you are seeing this error, please try the following:
1. Shutdown Glassfish domain
./asadmin stop-domain <domain>
2. Shutdown Oracle database
SQL> SHUTDOWN IMMEDIATE
3. Shutdown Listener
$ lsnrctl stop
and restart in this order
1. Oracle Listener
lsnrctl start
2. Oracle database
SQL> STARTUP
3. GlassFish domain
./asadmin start-domain <domain>
This should work!
My environment:
Redhat Enterprise Linux 5.4 with JDK 1.6
Oracle Database 11g Enterprise Edition 11.1.0.1.0
Oracle GlassFish Server 3.1.2
Oracle Database Mobile Server 11.1.0 for 64-bit Linux

Hi mario,
FYI
This issue can occurs when the primary and secondary Cisco ISE nodes' database are out of sync. For out of sync issues, which most likely are due to time changes or NTP sync issues, you must correct the system time and perform a manual sync up through the UI.
•For certificate expiry issues, you must install a valid certificate and perform a manual sync up through the UI.
•For a node that has been down for more than six hours, you must restart the node, check for connectivity issues, and perform a manual sync up through the UI.
For more information regarding this issue, please go through this link:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/troubleshooting_guide/ise_tsg.html#wp192802

Bluetooth failed after last OS Update

After the last OS update 10.7.3 on my Powerbook Pro, bluetooth failed on both Trackpad and Apple Mouse. It connects and then disconnects. Anysolutions out there?

catnfran,
I'm sorry to hear that you have been experiencing this issue with your Bluetooth feature! Updates are meant to offer enhancements.
Based on our findings, with the new update, making this change manually would be the recommend option. If needed, we can attempt to master reset the device http://vz.to/1d1KPN1 to see if this helps resolve this particular concern.
EfrainM_VZW
Follow us on Twitter @VZWSupport

Car bluetooth failed after recent OS 6.2 update

My car bluetooth (car is a BMW X5) has suddenly stopped working, immediately after my iPhone 5 updated its OS to 6.1.
It all worked perfectly before the OS upgrade.
Have re-paired it, re-set everything - no good. Any suggestions?
What happens is - the phone pairs with the car stereo, the car stereo answers the phone - but there's no sound. Can't hear anything - on the car stereo, on the phone, nothing.
And before anyone asks - yes, I am using it correctly, and the car is selected in the phone settings and when the call comes through.
I used it successfully for months - until the latest OS upgrade... And then it stops.     6.0 was fine. Why would 6.1 fail?
Why would the 6.1 upgrade cause this to happen?    What have Apple changed in their bluetooth functionality for OS 6.1, that would make something that worked perfectly suddenly stop working after the 6.1 upgrade?? Why make these changes suddenly?
Anyway, am very very annoyed.   I need to answer my phone in the car, for goodness sake! Are you trying to make me get a blackberry or an Android device, Apple?

Thanks for the lack of response, Apple.
I guess maybe it's time to get a Samsung Galaxy?
They at least seem to have some interest in ensuring software upgrades don't cut users off from their existing services.

Firefox is not working after restart. Need to reinstall every time I am starting PC.

Hello everyone,
I was happily using Firefox untill few days ago. Since then Firefox takes about five minutes to start (you cant see in taskbar or Application in task manager, just in Processes in task manager). When it finaly opens the first window it is not responding and there just blank window). It does the same in safe mode.
I tried to reinstall it several time, with deleting every Firefox related files on computer (following every relevant instruction from Support). I tried to backup my profile and start with new one after reinstall. Every time with same result: Firefox works perfectly after reinstall (even when I transfer files from old profile, every bookmark is right), but when I restart computer the problem is back.
I checked PC for malware and viruses by Avast, there should be now collision with other software since I did not install anything recently. I have cleaned registres, cache and cookies with CCleaner.
I am running 64-bit Windows 7 Lenovo E430, everything worked perfectly for half a year. Only problem I can relate to is a warning message about low free space on system drive, which occured at the same time problems with Firefox started (but it is now even true, I have 5 GB of free space on system drive).
I found other unresolved topics, one of them with same system configuration as mine.
https://support.mozilla.org/en-US/questions/956861?esab=a&as=aaq
https://support.mozilla.org/cs/questions/958824
Any suggestions before I desperately change to Firefox Portable?

Why not install and try Firefox portable, it may well be a good troubleshooting step. Try running it from an external memory stick.
The threads you referred to
* [/questions/956861] was closed but never solved
*[/questions/958824] similar
Some system information would help
*How much RAM is installed ?
*What is the total size of the Hard Disk Drive ?
*What is the current amount of free-space in GB ? and as a percentage ?
I try not to use Windows but certainly at one stage a rule of thumb was 20-25% free space should be available. Under about 12% defragging of a disk would likely fail. A page file would need to be larger than the amount of RAM maybe 1.5X , and a hibernate file would be the size of the RAM.
* Do not Hibernate if you are low on HDD space.
I suggest you proceed as follows
#Answer the above questions. I worry you have a lack of diskspace.
#Do a full scan with multiple and up-to-date anti-malware tools. Do not rely on Avast alone. No tool picks up everything. Report back what you scanned with and what was found.
#Backup and keep whatever profiles may be good or may contain recent information such as passwords and bookmarks, but do not use them yet.
#Download a new installer then Do a clean reinstall of Firefox, ensuring that the program folders are deleted before you re-install.
#Now restart, you expect the first restart to work. Close down and try again does it now work OK ?
The detailed instructions in the thread you read [/questions/958824#answer-436552] should help you.
If you have continuing problems is this after a restart of Firefox, or a restart of the Windows Operating System ?

Re-installing, uninstalling and installing CC fails after Mac OS in-place reinstall

My Mac OS Mavericks failed (not bootable) and I had to do a reinstallation of the OS and the CC Installer.
I have searched for online solutions including here but none are like mine or if I tried, did not work in fixing Adobe CC.
The reinstall put my old system, library , applications and system folders on my desktop. My user files, user library was still there.
I had to put the Adobe CC Apps back into my Applications folder (actually it copied them) and adobe support files back into the respective old locations to try and uninstall them and reinstall them.
I was able to uninstall Lightroom 4 and 5, Photoshop CC & 2014, Bridge, Muse, InDesign CC & 2014 and CC installer.
Some of the uninstalls were incomplete or partial or failed. I can not recall all I did, I did also try the clean up tool.
What I have now is the remains of Indesign cc, indesign CC 2014. The InDesign CC 2014 icon has been replaced with a generic icon with a circle and a slash. Clicking on it gives me the message "You can't open the application "Adobe InDesign CC 2014.app" because it may be damaged or incomplete.
I have been able to re-install Acrobat XI Pro, Bridge, Photoshop CC and 2014 and Lightroom 4 and 5
I also have broken Photoshop Elements 11 and 12 still on my computer that will not uninstall, I will try the CD next and reinstall then uninstall.
ALL of my other third party apps I don't have an issue with it is just Adobe CC. Can I just trash all the files and will I get into issues with the mother ship when I want to reinstall them?
Allan

Discussions of RE-installing
-http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Boot fails after improper shutdown

A few months ago, my Powerbook G4 Titanium began failing to boot into 10.4 after any improper shutdown---power failure, force restart, etc.
It would begin booting, the little circle would start to spin, and then the thing would just shut off. No error, no message.
The only solution was to pull out my Norton Systemworks CD, use it to boot into OS9, and then restart into 10.4.
Any help in figuring out what's up would be greatly appriciated.

Norton Systemworks was actually probably the cause at one point. It is not compatible with Mac OS X in its Disk Doctor or Speed Disk module.
You should only use these utilites:
1. A backup utility before any other as my backup FAQ says:
http://www.macmaps.com/backup.html
2. And if your data is backed up and won't boot after an improper shut down, try repairing your directory with utilities known to work as my FAQ explains:
http://www.macmaps.com/directoryfaq.html
The only elements of Systemworks that are even remotely safe for use with Mac OS X are Retrospect for backup, and Anti-virus for locating Windows viruses on your Mac that you may transfer to Windows users. Everything else, you should throw away from the Systemworks bundle.

Windows 7 64Bit - iPhone 3GS Driver needs constant reinstalling for photos

This is a fairly fresh installation of windows 7 64bit, I can sync my iphone and apps and music work without issue, but the driver that lets me access the photos has recently started showing an "!" every time I connect, I can only access my photos by telling windows 7 to troubleshoot the driver
it then determines that a driver reinstall is needed which then lets me access the images.. until I re-sync again.
Any ideas would be good, i dont want to have to reinstall itunes
Thank you.

If using a 64-bit version of Windows Vista or Windows 7, type C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers in the "Search for driver software in this location" field when updating the driver.
iPhone or iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://support.apple.com/kb/TS1538
If above does not work then right click on the iTunes shortcut and select properties. Click the compatibility tab and check the "Run this program in compatibility mode" check box. From the drop down menu choose choose Vista service pack 2 and then click Apply. Now double click the iTunes setup.

What startup command should be writen after abnormal shutdown?

Hi all
I have a 10g DB instance on Unix server.
The server was shutdown without first shutting down the DB and Listener.
Now when I started the server, should I type:
sqlplus: sys as sysdba
startup
in normal mode or nomount mode?
Is there anything else to be done after startup?
Please mention the reason!
Thank you

Well, yes all db files are autoextend
When I typed the command you gave, it showed AUTO YESGood.
But i'll have to work on making the size unlimited.Use this command:
SQL> ALTER DATABASE DATAFILE '<FULL Path to Datafile>' AUTOEXTEND ON MAXSIZE UNLIMITED;Note: 468096.1 - How To Check For Autoextensible Datafiles Set To Maxsize Unlimited
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468096.1

JFS partition after force shutdown needs fsck all the time

Basically, I have a problem that everytime I do a force shutdown, my JFS /files partition doesnt mount as it wants to be fsck'ed with jfs_fsck before.
Once I do that it's all happy again, says nothing was wrong.
jfs_fsck version 1.1.14, 06-Apr-2009
processing started: 2/27/2010 14.43.52
Using default parameter: -p
The current device is: /dev/mapper/holm-files
Block size in bytes: 4096
Filesystem size in blocks: 159362048
**Phase 0 - Replay Journal Log
Filesystem is clean.
Is there a way of making the system do an fsck on it's own if the partition doesn't mount and then reattempt the mount?
Thanks
Last edited by brendan (2010-02-27 14:49:18)

I don't believe there is anything actively wrong with the partition though.
It's just when I do a force shutdown it complains - quite naturally. But i'd like Arch to do an FSCK as part of bootup if it fails to mount this drive.

Bluetooth fail after upgrading til lollipop

After installing lollipop 5.0.2 i have problem with my bluetooth connection. I use the app WIMP and when i play a songlist it only plays two songs before it stops playing. Have tried with three different loudspeakers, same problem. Only happens when i play via bluetooth, not via cable. Happened after lollipop upgrade.

Seems strange that it's 2 songs - Have you contacted the developer to see if there is an issue with the app and Lollipop
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Hyperion Planning application got abnormal shutdown

Hi,
Would need your help on the issue I recently hit in my environment.
Product version: 9.3.1.1.00
Product: Hyperion Planning
Unix Platform: Sun Solaries 64bit
Issue:-
The application received the Abnormal Shutdown command then the application got shutdown and then not starting up by itself after that.
Query:-
Is there anyway to set it to be started automatically even after abnormal shutdown?
Thanks.
SuSin

Hi Sandeep,
The xcp files are in the application directory.
I've raised SR in Metalink but the support request me to change the Essbase.cfg on the NETRETRY and NETRETRYCOUNT from 5000 and 3000 respectively to 1000 each and also the SERVERTHREAD from 200 change to 100.
I've read from one of the reply in the forum saying that if the xcp files are in application directory then it does not really related to the Essbase.cfg unless it is from the server directory. So if in this case, should I still modify the config file?
Hi John,
Previously in Jan, it happended once where users are not able to retrieve the data from HyperionPlanning and also Workspace. So after that incident actually we did clear the data and reload the level-0 data. The system was OK (no more Abnormal Shutdown) for a while then came back with this issue again recently.
Anything can be apply in order to clear this problem?
Thanks.

I need to reinstall my computer, how do I deal with Premiere pro and After effects?

Hello,
As my question states I need to reinstall my computer (laptop) and I'm not quite sure on how to deal with Premiere pro and After effects.
I am thinking that I need to do some sort of backup and save my projects and footage on a sepparate drive.
If I reinstall my computer, install my creative suit production premium, and move back all of my projects and footage, won't I have to re-link every single clip?
I am currently workning on several different projects and having to re-link everything is something I don't even want to think about, that would take me days if not weeks.
Another option on my mind would be to use Creative cloud. I do have the free version but I have never used it even once before and I'm not quite sure what the purpose of the cloud is and if this is a way to use it.
I have no idea how to go about this computer reinstalation without either loosing tons of work or having to re-link every single clip used.
I am videoediting only as a hobby so I have no experience working with other people and sharing projects or the like, wich is my understanding of what the cloud is for.
Any and all help would be grealty appreciated, I know this is probably really easy but ever since i got my Suit I haven't reinstalled, upgraded och changed my computer so I am just clueless as to how to go about this.
I have Creative suit production premium, I also have the free Creative cloud.
It is only Premiere pro and After effects that I am using and am worried about.
Thank you for any help.
-Lisa Kajupank
(and oh, I just notice my name - umustbejoking - I think I just wrote that cause they wouldn't let me use anything else, saying it was already taken. So nevermind that haha.)
Message was edited by: umustbejoking

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(84620)

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Bluetooth fails after abnormal shutdown - needs constant reinstall.

Similar Messages

Maybe you are looking for