Bluetooth file exchange cannot activate or send file in mac os 10.4.11

Hi Can anyone help please?
I can't send any files from my Mac!
The bluetooth works, I can receive files but I cannot open the bluetooth file exchange to send files from my Mac!
I use a Macbook with OS 10.4.11.
Thank you!

Similar Messages

How to pick files from multiple directories via Sender File Adapter?

Hi guys,
I have a scenario File to IDOC. The Sender File Adapter has to take all files: .xml from Source directory E://Current/.
Actually directories are like
E:/Plant1/Current/
E:/Plant1/History/
E:/Plant2/Current/
E:/Plant2/History/.
Can I have one Sender File Adapter to pick all *.xml files
from
E:/Plant1/Current/ and
E:/Plant2/Current/ and how can I write it in Source Directory of Communication Channel?
Or do I have to have a Sender File Adapter for each Plant?
Any suggestion please?
Kind regards,
Danijela Zivanovic

Hey
You might wanna have a look at "Additional selection for source file" parameter in sender file adapter.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/singleSenderFileCC4MultipleDirectories
XI/PI: how to exclude files in a sender File adapter?
Even though this method works but there are some constraints,please check help.sap.com for constraints.
Thanx
Aamir

BlueTooth File Exchange - cannot connect

Hi all i did a search and found some good starting places and yet i still have my problem:
Have been connecting to my cell phone flawlessly for file transfer via the "browse" menu, (a modded moto E815); recently had to do an Archive and Install, (which cleaned up a mess), and after everything was up and running, checked out BT File Exchange and it still worked flawlessly. A few days ago, i went to transfer a file and it starts, tries to connect, then i get the message: "Connection failed or closed". To add insult to injury, BTFE promptly crashes! Deleted pref files, made sure the Phone could connect via BT with other programs (which it does), and i don't have a clue... I tried reading the crash log file, and i can't make sense of it.... Any thoughts?
Thanks for taking the time. PS: I deleted the phone's profile, went through and paired it again with no joy.
Pismo G4/550;SuperDrive;BT Dongle;1GB RAM Mac OS X (10.3.9) upgraded CPU & Optical Drive!

Have you tried this already?
Follow the standard procedures for Mac OS X miracles:
Applications > Utilities > Disk Utility > select your start up volume > First Aid > Repair Permissions
Restart the your Mac with the Mac OS X installation CD or DVD (through holding the key C on the keyboard). There select your preferred language and then not install Mac OS X but go to the File menu and select Disk Utility. There select your normal volume > First Aid > Repair disk. Restart your Mac.
System Preferences > Users and hit the small "+" at the bottom to create a new user. Select Log out from the Apple menu and log in this new user.
If it worked in the new user, the problem is somewhere in a file in your users Library > Preferences folder.

I cannot add nor send file attachments larger than 100k on any of my email servers from this particular PC. Is there a fix for this?

I cannot attach a file larger than 100k to any email account (gmail, aol, secureserver.net) while using Firefox. However, I can send files larger than 100k from those same accounts on this computer when using IE. Switched to Firefox from IE and would prefer to continue using Firefox, however this issue presents a problem for my business needs. Please advise. Thank you.

Well seeing as I'm running Lion on 2 GB of RAM, I can't see how upgrading the RAM will make that much of a difference. If you are seeing launch times in minutes, it probably indicates your cache got corrupted by some third party cache cleaning software. To see if some corruption can be fixed, first backup your data:
https://discussions.apple.com/docs/DOC-1992
Then boot in safe mode, holding the shift key. If issues persist in safe mode, run the hardware test that came with your Mac.
http://docs.info.apple.com/article.html?artnum=303081
And if that is unrevealing, and booting into safe mode doesn't solve anything, and you are backed up, try repairing the directory by:
1. Booting into the restore partition with command-R.
2. Selecting the installer's Utilities menu.
3. Selecting Disk Utility
4. Selecting First Aid
5. Selecting the boot partition.
6. Click on repair disk (not repair permissions)
Do NOT proceed with any install itself. Just quit the install program
If the disk is not able to be repaired, purchase Alsoft Disk Warrior, and boot of that to repair the directory.
If it is able to be repaired, and the machine is still slow, I think you may have run into some RAM that is bad, and need to replace it, not add to it.
If Disk Warrior can't repair the hard disk, replace the hard disk itself.

File to SOAP,error in sender file adapter

Hi,
I am doing a scenario FILE to SOAP where In file adapter I am using Quality od service as Exactly once in order.I am getting the below error.It works fine when I use QOS=Exactly once.Not sure why,can you guys please help me.Can we really use QOS-EOIO for sender file adapter,where exacly do we use it.
Thanks
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Edited by: guest xi on Apr 16, 2008 11:55 AM

Hi,
Thanks for your replies guys.I diid give the queue name ,I dont know what is causing the error.Now even QOS=EO which was working fine before is throwing an error.I am using the same file name for both
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Sun server - file not found warning message - send-file reports: HTTP4142

(File not found)
[25/Sep/2012:17:37:34] warning ( 9732): for host 127.0.0.1 trying to GET /vt/css/body_ie8.css, send-file reports: HTTP4142: can't find C:/Program Files/Sun/WebServer7/https-AC7440R877W6X.com/web-app/AC7440R877W6X.com/vt/css/body_ie8.css.
sun server is trying to find file body_ie8.css which is not exist. now i m testing application in ie8 so getting error like this. If i run same application in ie6 i will get body_ie6.css. if i create dummy files with these name i wont get any error message.
another sample error message
warning (14280): for host 127.0.0.1 trying to GET /vt/css/icefaces_ie.css, send-file reports: HTTP4142: can't find C:/Program Files/Sun/WebServer7/https-AC7440R877W6X.com/web-app/AC7440R877W6X.com/vt/css/icefaces_ie.css (File not found).
I m running JSF framework icefaces implememntation

Hi:
After some days and several test I discover the solution.
I'm using Unicodes in the messages text (like \u00e9, \u00e1) and due to a typing mistake, in just a word the sequence \u00es appears instead of \u00e9.
It seems \u00es is not a valid Unicode code and that was the cause of this particular error.
I think this kind of message error must change depending which web server is used.
As i said, i'm using the embedded oc4j server.
Bye.

How to process files one by one using sender file adapter

Hi,
I have to process file one by one using my file adapter (sender), because while doing the G/R materials get locked, if the same materal exist in other files.
I have maintained QOS as "Exactly Once in Order" & processing Sequence as "by date".
Processing sequence come in which tab? What will be the Queue name?
Thanks,
krishna

It will come under Processing tab
Here you need to select the first parameter QOS as EOIO
Then QUEUE name and processing sequence will be enabled.
NOTE: This will work only for NFS protocol not for FTP.

Issue while fetching the file through *.extension by FTP sender file adapte

Hello Experts,
I am facing a issue while fetching the data through sender File adapter with ' *.file extension' .I am illustarting the scenario as below .
It is a simple scenarion of File to File inboumd scenarion.Here file is getting picked up from a third party system
through FTP sender chanel and stored in a temp folder of PI through NFS rceiver file adapter .
The problem is however I am getting, while picking the file with file name as "*.exo"(where exo is the file extension).
But while fetching the file with particular name like"abcd_10032011*.exo"(file naming has been done by combination of abcd(always same)_currentdate(change according to current date)),file picked successfully .
So here ,in the prior case file not getting picked up,but in later case it dose .
Can anyone please let me know what might be the issue?

Hi Sunit,
Connect from your PI System to 3rd Party System (where are placed the Source Files)
FTP <PartySystemHostName>
eg. FTP 10.2.3.456 (then insert Username & Password to Login)
Go to source directory
cd \<SourceDirectory>
eg. cd \donaldduck\directory\
Execute a File List command
ls -la *.<extension>
eg. ls -la *.exo
In this way you should be able to view all files with this extension (*.exo), the same action that Sap XI perform to pickup the file.
Then, try to copy that file to your Local PI System (to check if there're some permissions issue):
mget <filename>.exo
eg. mpget File1_01012011.exo

Why do I get error : InDesign could not package the document ' name of file ' . Cannot copy necessary linked file(s).

I am create a very basic 36 page magazine. I have never ever encounter this issue in the 10 years I have been creating these. I have been getting this issue ever since the cloud InDesign. It is making it very difficult to get my work to press. I have no errors! All items are linked. I've gone through and relinked. I've removed items. I feel like I've tried many things. Anyone have any ideas???

Thank you so much!!! I just did a test run with an old file and changed all of the file names that had symbols and it worked!! It packaged for me without errors. So great!!!!

I downloaded itunes 10.5. During install I get a message that states the file cannot be located because it is on a network resource that is unavailable. I tried to locate the file,but cannot find the apps file under my user name or any other place

I downloaded itunes 10.5 on my laptop. upgrade from 10.4.1. Install was terminated because "the feature you are using is on a network resurce that is unavailable.
I tried to locate the file under my user name sub file apps, but could not

you need to specify the database when you exec. the commands.
ALTER DATABASE database_name SET ENCRYPTION OFF --> user database.
DROP DATABASE ENCRYPTION KEY --> user database.
DROP CERTIFICATE certificate_name --> master database
DROP MASTER KEY --> master database.
Best Regards,
Ahmad Elayyan.
Regards, Ahmad Elayyan Database Team Leader

How to read files with codepage UTF16LE with "Sender File Adapter"

Hi everybody,
I am using a XI-Filesender-Adapter to get a (UTF-16LE encoded) file und process it in XI-Mapping.
This is my File-Content:
Cost Centre,Cost Code,Page Count (B&W),Page Count (Colour),Job Count
Unknown,Lexmark,"37,480",334,"11,968"
Unknown,Unknown,312,0,177
110000,Lexmark,128,228,43
The HEX-representation of this content is:
FF FE 43 00 6F 00 73 00 74 00 20 00 43 00 65 00
(The starting 2 Bytes FF FE represent UTF16-LE )
And this is the payload I get for mapping:
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_POM_KOSTEN xmlns:ns="http://aua.com/pom">
<POM_REC>
<COSTCENTER>uFEFFCost Centre</COSTCENTER>
<COSTCODE>Cost Code</COSTCODE>
<PAGECOUNT_BW>Page Count (B&W)</PAGECOUNT_BW>
<PAGECOUNT_COL>Page Count (Colour)</PAGECOUNT_COL>
<JOBCOUNT>Job Count</JOBCOUNT>
</POM_REC>
<POM_REC>
<COSTCENTER>Unknown</COSTCENTER>
<COSTCODE>Lexmark</COSTCODE>
<PAGECOUNT_BW>37,480</PAGECOUNT_BW>
<PAGECOUNT_COL>334</PAGECOUNT_COL>
<JOBCOUNT>11,968</JOBCOUNT>
</POM_REC>
<POM_REC>
<COSTCENTER>Unknown</COSTCENTER>
<COSTCODE>Unknown</COSTCODE>
<PAGECOUNT_BW>312</PAGECOUNT_BW>
<PAGECOUNT_COL>0</PAGECOUNT_COL>
<JOBCOUNT>177</JOBCOUNT>
</POM_REC>
<POM_REC>
<COSTCENTER>110000</COSTCENTER>
<COSTCODE>Lexmark</COSTCODE>
<PAGECOUNT_BW>128</PAGECOUNT_BW>
<PAGECOUNT_COL>228</PAGECOUNT_COL>
<JOBCOUNT>43</JOBCOUNT>
<POM_REC>
I can see the correct strings (for example Cost Centre) in payload, but the string-comparison in the user defines function cannot recognize the equality of the strings:
for (int i =0; i < a.length; i++) {
if (
(a<i>.equals("Cost Centre")) )
result.addSuppress();
else
result.addValue("");
Actually I am using UTF-8 as codepage in Fileadapter (and Text as type)
When I try to use UTF16 (or UTF-16LE) as Codepage, I am getting unreadable characters.
I also tried binary, UTF16-BE,...
The only way is to covert the file to ANSI before I use it with XI. Then my function does work correctly.
Does anybody have an idea, how I can read a UTF16-LE File and process it correctly in XI?
I am using XI 7.00 0023 and JSDK 1.4.2-34
Thanks a lot
Armin

Hello Armin,
I have gone through some SAP notes and blogs to find solution to your problem, here is what I found
1. SAP NOTE 821267
q) How do I correctly configure the File Encoding used by the File
Adapter?
Flat Files with File Content Conversion
For a File Sender channel, configure the encoding of the source
file. The file will be interpreted according to the configured
encoding and converted to XML with an UTF-8 encoding.
For a File Receiver channel, configure the encoding to match
the encoding you would like to be written to the target flat
file.
- Flat Files without File Content Conversion
Whether to configure an encoding in this case depends on if you
want to pass through the file "as is", e.g. within a File
Sender to File Receiver scenario, or if you want to convert the
file's encoding on its way through the Integration Server. For
"as is" processing, configure both the sender and the receiver
using the File Type setting "Binary".
To apply an encoding conversion, configure the respective
source and target encoding in both the sender and receiver
channel.
Important: Configuring an encoding in the receiver channel
will only lead to the expected results if the payload sent to
the receiver channel is in UTF-8 format (e.g., by having
specified an encoding conversion in the Sender channel).
So as per this note if you configure the encoding scheme of sender communication channel to UTF-16LE, adapter should be able to convert it to UTF-8 by default. But you have posted that this encoding scheme is leading to unreadable charcters
2) SAP note 880173
This speaks of use of module XMLAnonymizerBean which can be applied to XML payload to change its encoding.
3) How to guide on encoding : http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?QuickLink=index&overridelayout=true
4) SAP note:960663
http://help.sap.com/saphelp_nw04/helpdata/en/45/da2deb47812e98e10000000a155369/content.htm
TextCodePageConversion Bean details which might solve your problem.
5) Finally if nothing above works you need a java mapping code to convert to target XML structure without any File content conversion. The mapping will convert the received file to proper target XML in "UTF-8" encoding. Please let us know if you need help on the code with this final option.
Regards
Anupam

FCC file channel cannot process the empty file

Hi,
My requirement is like that a msg mapping getting two files from different sources and combining into one file and send to the receiver. There is a possibility that any one of the file can be empty.. now problem is how to process the empty file in FCC file channel. When we trying to process the msg we are getting the error msg like "file end of exception". we already check the option empty file in file comm channel....under processing tab. But no use.Though we achieved through a module in sender channel. i want to know how to achieve this through simple content conversion by the FCC channel.
In Content conversion. Record----> item,.. here what is mean ''? 0 to outbound or 1 to outbound?
Regards
Balaji

Hi Balaji,
here what is mean ''? 0 to outbound or 1 to outbound*
means 0 to unbounded.
Let me remind u ... the requirement cannot be achived in this way.. if file is empty.
I hope u already checked the option..
process empty files.
I think u can handle this by, using a adapter module, in which..
if file size(ASMA) is zero.. create a empty message and send it
to the PI.
Babu
Edited by: hlbabu123 on Mar 9, 2010 2:36 PM

File is being truncated by Sender File Adapter

Hello,
My input file is very wide. It has got 175 fields and is around 4000+ char wide. When file adapter loads it, the inbound payload does not contain all the fields (i.e. it is being truncated). Any idea that how can I load this too wide file!
Thanks,

Hey Dehra,
<i>Firstly, the number of records in your file is not a problem at all. Your limitation is the length of one record. See question 3 in note 545923. It says that your transfer structure cannot be more that 1962 bytes including the system fields.
Now to calculate how many fields will fit into 1962 bytes. For this, take the first field. If the infoobject is defined as CHAR 9 then it is 9 bytes, a key-figure is 10 bytes most of the time. So add up. Remember even if in your flat file there are 2 chars but it is mapped into a char 9 field, it still counts as char 9. I don't think number of columns is a factor.
You can split your file into multiple files of 1962 bytes size but keeping the unique key of the records common across all the files. So that you can merge then in an ODS maybe. Again remember that fields like request number, date packet number, partition ID and record number has to be there in every PSA and a part of the 1962 limit.</i>
Information shared by Somnath Kumar in Truncated flat file
This might help you to solve your problem
thanks,
pooja

Archiving file in different folder in sender file adapter

Hi,
I have a requirement in witch i have to pick 7 different file from seven different folder.
for this I am using advance selection tab and defining all the other folder path.
but my problem is I have to archive the different file in different folder .
For exm..
/folder1/file1.txt need to be archive in /archive_filder1/file1.txt
/folder2/file2.txt need to be archive in /archive_filder2/file2.txt
/folder3/file3.txt need to be archive in /archive_filder3/file3.txt
can any one tell me that how to define the dynamic archive folder path??.
regards,
Navneet

Hi Navneet
In File Access parameters --> Target Directory
Use this type of Directory name
\XIDEV_STORES\%store%\sapoutbound
here %store% will be changed accordingly
e.g. if file will come for store 001 then this %Store% will be replaced by 001 and file will be placed in this 001 folder and if file will come for store 002 then this %Store% will be replaced by 002 and file will be placed in this 002 folder over FTP.
For to achieve this Go to Advanced tab
For Variable Substitution check mark Enable
Now speciofy the parameter values for Variable Name and Reference
Under Vriable name specify = store
Under Reference specify = payload:WP_PLU02,1,IDOC,1,EDI_DC40,1,RCVPRN,1 -
You have to give full path name here that where this store variable is located into IDOC.
Hope this example will help you
Regards
Dheeraj Kumar

I am trying to upload a downloaded pdf file, but cannot open the downloaded files

I am trying to open 2 downloaded pdf files (ticketmaster tickets) from 4/23/11 so that I can upload them to stubhub.com and sell them. I can't even open a pdf file that I downloaded today? Plus, the pdf files are not being saved in my download file on my C disk as I have specified. Any suggestions?

I am 99.9% certain that all pages were uploaded. You can confirm this by downloading it and checking to see that it's all there.
The problem is that the file previewer within Workspaces.acrobat.com only displays the first 50 pages.
You might try our other file storage service at files.acrobat.com. The previewer there displays all pages of uploaded PDFs.

Bluetooth file exchange cannot activate or send file in mac os 10.4.11

Similar Messages

Maybe you are looking for