Bluetooth stopped working after iOS 6 update, help!

I use Bose Soundlink, and ever since i did the iOS 6, i can no longer connect to my Bose speaker. Its very frustrating! Does anyone know a fix or can someone at least tell me how to remove the update? Thanks SO much in advance!

This is my first Internet posting ever, believe it or not. Figured if im going to post might as well do it to share some useful advice instead of personal dribble. I too just purchased the soundlink (literally yesterday) and iPad worked fine on iOS 6, but iPhone 4S was not syncing before or after the update to iOS 6. I just figured out how to connect the devices so follow directions carefully. Hard reset iPhone (hold lock + home button together for about 10s). Hold Bluetooth button on soundlink until you hear beep then let go. Now hold mute button until you hear beep then let go. Now turn iPhone back on, then turn on airplane mode. Press Bluetooth button once on soundlink, then turn on Bluetooth on iPhone. Should now be able to see device and pair. I think with wifi and cell on there are too many signals for the phone and it gets "confused" (lol). Not the most ideal solution for some, but I figure you bought the device for tunes and shouldn't care if you miss a call or two while listening. FYI, as i finish writing this i just realized my phone now can find the device consistently, regardless of whether or not airplane mode on. EFF YA I ROCK AND IT'S MY BDAY AT MIDNIGHT!!!  Hope this helps!

Similar Messages

  • Front and back cameras stopped working after IOS 8 update

    My front and back cameras both stopped working after i updated my phone to the IOS 8 software. Does anyone know why this would happen or any way of fixing it?

    Hi VictoriaViking,
    Not sure why your cameras stopped working with the update, or what the exact symptom is (black screen, no response...), but please check out the Camera troubleshooting section of this article.  (I know some don't apply to your issue.)
    iPhone: Hardware troubleshooting
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Take care,
    Nubz

  • Earphone microphone stopped working after IOS 6 update

    As soon as I completed the updates on all my devices the earbud microphones stopped working!  The reboot fix does not work...obviously due to a bug in the update!  Anyone else having this issue?

    I had this problem to so I called my network carrier O2 and the problem was when I updated using wifi it used my 3G data instead and used all my data up, apparently they don't charge you when you go over the limit but it runs super slow to a point you think it's stopped working. O2 gave me 1gig of data free to try it and its working fine now even better than ios5.1.1. Hope this helps

  • Bluetooth stopped working after 7.1 update

    After I updated to IOS 7.1 my phone cannot connect to any bluetooth devices. Car, Headset, Mac. it keeps seeking but it is not able to locate any devices.

    Same problem here. no wifi or bluetooth after updating to iOS 7.1.1
    Off to genius bar tomorrow. restore via itunes didnt work

  • Bluetooth stops working after OS X update on mac mini

    Just installed the OS X 10.8.5 on my Mac Mini late 2012 model and after the restart the bluetooth was not available. I had to find a USB Keyboard and mouse to be able to log on to my computer and use it. Does anyone know how to repair this. This must be a fault from Apples update and Apple should find a solution or bring out a fix on this update. Any ideas

    Try resetting the SMC
    Intel-based Macs: Resetting the System Management Controller (SMC)
    I had no problem on my 2012 Mni after updating.

  • Lightening adaptor stopped working after ios 7 update?

    hi guys i bought an genuine apple adaptor lead to fit my ip5 to the old style apple connecter in my car and all was fins untill i updated it to ios 7 then it always said incompatible and wouldnt play, ive tried all the usual reset while connected etc and still the same.
    i know the lead is good as the wife hasnt updated her ip5 to ios7 yet and it still plays her music fine?
    any ideas or advice?

    looks like it could be apple that have broken this with theyre ios 7 from everything im reading and apple dont even comment on this problem thats very common judging by google searches.
    these silly little issues seem to be getting more problematic with apple, ive had every iphone since the 3 and they just seem to be getting more problematic and build quality gets worse, really hope the 6 is a big improvement as they are becoming the same old repackaged brand.
    apple used to be at the design front wheres that gone?

  • 4th Gen. iTouch stopped working after iOS 6 update.

    This morning I tried to update to the iOS 6 software, during the update my iPod froze and shut off. When I tried to turn it back on it flashed different colored screens then turned off/would display Apple logo then flash white. I tried restoring it and everytime I get the 3194 error. I've tried all the listed suggestions, I don't know why my iPod is crashing.

    Port is Blocked to Apple
    Security Software and Related Troubles
    http://support.apple.com/kb/TS3125          Basic Troubleshooting
    http://support.apple.com/kb/TS3297          Advance Troubleshooting
    http://support.apple.com/kb/ts1629          Ports List
    Basics
    Check correct date, time, and timezone.
    Log in as administrative user account
    Verifiy iTunes updated
    Update Operating System “OS” (Ms Windows, Mac OSX)
    Update Modem / Router firmware
    Update security software (Antivirus, Firewall)
    Remove Outdated Security Software (Always restart afterwards)
    Advanced
    Remove Mobile Software not used anymore
    (Motorola, Android, Nokia, Sony, Blackberry)
    Add Apple programs to firewall permissions
    Allow Ports 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999
    Permit Domains - apple.com , edgesuite.net , mzstatic.com
    Disable Security Software
    Remove Security Software (restart!)
    Delete “Hosts” file and restart, or edit and save.
    Check Browser Settings: Use SSL3, TLS1, Auto Detect, No Proxy Settings

  • Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

    imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

    Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

  • Rear camera stopped working after iOS 7.1.2 update- iPhone 5

    My rear camera is not working after I did 7.1.2 software update this morning. I see a blank screen when I click the camera app.

    So my camera was fine until yesterday and pressing on the lens did not work so I went back to looking for solutions:
    http://www.cydiaios7.com/back-camera-not-working-after-ios-7-update-solution.htm l
    The article is from last year (IOS 7), but solution 1 worked for me. Here are all the solutions from the link:
    Solution 1
    Hold the Sleep button until you see the Slide to Power Off slider
    Slide it and then immediately hold down the Sleep button again until you see the Apple logo
    Solution 2
    Open your Settings app
    Tap General
    Tap Reset
    Tap Reset All Settings
    While you won’t lose any of your data you will have to re-enter all of your passwords and personal settings again
    Solution 3
    Hold the Sleep and Home button simultaneously until the Apple logo appears
    Let go of both buttons at the same time and let your iOS device boot up as normal
    Solution 4
    Try a different camera app instead of the stock one – downloadCamera Awesome, free of charge, from the App store
    Install and both cameras should work properly.

  • Coldfusion 64 bit windows installer stops working after recent microsoft update

    Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
    My question is at the end.
    Trying to deploy coldfusion 9 enterprise 64 bit trial  version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
    Steps taken (remember, this is all 64 bit):
    1. Installed the base OS which was slipstreamed with SP2.
    2. Checked w/ microsoft and installed 63 OS updates.
    3. Launch the CF9 trial exe.
    4. As soon as the first screen finishes (the one that looks like  it is extracting files) then the second screen pops up (the one that  simply says CF Adobe Coldfusion 9) and the progress bar quickly moves  95% to the right and the install application quits. No error, no nothing. No log file either.
    5. After a moment of incredulous silence (and retrying/rebooting,  etc), I started to google it. I found nothing. However, I did find a  post (thanks dspent!) that was helpful in that it told how he was able  to get at a log file of sorts, by pre-extracting the  coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand.  (Dspent's install snafu was different than mine, but his post was very  valuable and got me started in the right direction.)
    6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
    7. From the windows directory created by step 6, I launched adobe_cf.exe.
    8. Same thing (the install application quits. No error, no nothing. No log file either.).
    9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
    10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
    11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
    12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
    13. Bingo! That install works.
    14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
    15. Back on the first server (the one with the MS security  patches installed and the one that CF won't install on). In the CF file  adobe_cf.lax (one of the files extracted in step 6) there is a line that  mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
    16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
    17. Modify a line in adobe_cf.lax :
       before
         lax.nl.current.vm=resource\\jre\\bin\\java.exe
       after
         lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
    (that assumes that you let step 16 install to the default location)
    Save the file.
    18. Run the install ... ** IT WORKS ** !
    Obviously, the built in java provided with the CF installer is  no longer compatible with some change introduced by some recent MS  update on the W2K3 64b SP2 platform.
    And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the  version of java.exe that is in that directory is the original version,  not the newer version I forced the installer to use).
    On the surface, CF seems to run OK, but I have not done any application testing yet.
    And finally my
    ** QUESTION **
    Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same  (close though) so I certainly don't want to break things by doing this,  but instinct tells me that if the installer broke using the older  version, then something else is gonna break down the road if I don't use  the new version. On the other hand, the differences in the  directories and files is enough that it makes me very nervous, with my  limitied java skill set, to make this decision. 
    Thanks in advance!!
    Byron

    Hi Byron,
    Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
    So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
    Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
    Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
    Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
    #java.home=C:/ColdFusion9/runtime/jre
    Add new line like so and save jvm.config:
    java.home=C:/Program Files/Java/jdk1.6.0_24/jre
    Note  there the slashes and the location of the JRE (runtime) - you need to  point to the one in JDK because the other JRE in C:\Program  Files\Java\jre6 will be missing a DLL.
    Start CF via SERVICES.msc.
    HTH, Carl.

  • HT6154 rear camera on iphone 5 not working after ios 8 update why?

    My iPhone 5 rear camera is no longer working after ios 8 update its just black I can see the flash choice the hdr and the timer but other than that it is a black screen

    Hi there fjci2003,
    You may find the troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch 
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • I have upgraded iTunes now it stops working after a few seconds.Help?

    i have upgraded iTunes now it stops working after a few seconds.Help?

    Hi Andrew,
    If you have issues with iTunes unexpectedly quitting you may find the troubleshooting steps in this article useful -
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    If you are using Windows XP, you may want to use this article -
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1421
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled. Any fix to make it work?

    Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled.
    i tried resetting firefox and look for similar problems, unfortunately didn't find anything.
    also there's weird blank space before address in address bar
    other extensions and addons seem to be running fine.

    jscher2000, i tried that, i thought it didnt work before, it's just that this time i accidentally closed (and thus restarted) firefox and it worked, thanks man

  • Bluetooth stopped working after update to PR1.3

    After updating my N9 to PR1.3 the bluetooth stopped working. Trying to connect it to my laptop or other phone is unsuccessful, only get "Transfer failed" message. Anyone has this problem, too?

    @RSmaster
    PR1.3 still transfers OK to my Mac, although always takes longer to go through than from Symbian device!
    Happy to have helped forum with a Support Ratio = 42.5

  • IPhone 5S home button stopped working after iOS 8.3 update

    My home button stopped working after I updated it to the iOS 8.3. My finger print can still unlock the phone but the home button won't work.

    What you are describing sounds more like a hardware issue than a software issue.  Make an appointment at the genius bar of your local apple retail store and have the device evaluated.
    Make a Genius Bar Reservation (or cancel an existing reservation)
    http://www.apple.com/retail/geniusbar/
    Sign in using your Apple ID

Maybe you are looking for