Blurry Jpgs when displaying after insertion into project

I am running Elements 10. I have created a project with numerous video clips and pictures inserted. I cannot seem to get the pictures to display clearly no matter what format (jpg, tiff, etc) I use. The video clips seem to display ok.

PrE 10 and Windows 7 64 bit, 8GB Ram
Actually pictures range all the way up to 3136 x 2184
Video seems to be clear on playback. Here are the details of the clip I from which I used about two minutes:
<?xml version="1.0" encoding="UTF-8"?>
-<Mediainfo version="0.7.63">-<File>-<track type="General"><Complete_name>F:\Video\1989 Hilda Interview.mpg</Complete_name><Format>MPEG-PS</Format><File_size>2.11 GiB</File_size><Duration>35mn 12s</Duration><Overall_bit_rate_mode>Variable</Overall_bit_rate_mode><Overall_bit_rate>8 574 Kbps</Overall_bit_rate></track>-<track type="Video"><ID>224 (0xE0)</ID><Format>MPEG Video</Format><Format_version>Version 2</Format_version><Format_profile>Main@Main</Format_profile><Format_settings__BVOP>Yes</F ormat_settings__BVOP><Format_settings__Matrix>Custom</Format_settings__Matrix><Format_sett ings__GOP>M=3, N=15</Format_settings__GOP><Duration>35mn 12s</Duration><Bit_rate_mode>Variable</Bit_rate_mode><Bit_rate>8 180 Kbps</Bit_rate><Maximum_bit_rate>9 570 Kbps</Maximum_bit_rate><Width>720 pixels</Width><Height>480 pixels</Height><Display_aspect_ratio>4:3</Display_aspect_ratio><Frame_rate>29.970 fps</Frame_rate><Standard>NTSC</Standard><Color_space>YUV</Color_space><Chroma_subsamplin g>4:2:0</Chroma_subsampling><Bit_depth>8 bits</Bit_depth><Scan_type>Interlaced</Scan_type><Scan_order>Top Field First</Scan_order><Compression_mode>Lossy</Compression_mode><Bits__Pixel_Frame_>0.790</Bi ts__Pixel_Frame_><Time_code_of_first_frame>00:00:00:00</Time_code_of_first_frame><Time_cod e_source>Group of pictures header</Time_code_source><Stream_size>2.01 GiB (95%)</Stream_size></track>-<track type="Audio"><ID>192 (0xC0)</ID><Format>MPEG Audio</Format><Format_version>Version 1</Format_version><Format_profile>Layer 2</Format_profile><Duration>35mn 12s</Duration><Bit_rate_mode>Constant</Bit_rate_mode><Bit_rate>224 Kbps</Bit_rate><Channel_s_>2 channels</Channel_s_><Sampling_rate>48.0 KHz</Sampling_rate><Compression_mode>Lossy</Compression_mode><Delay_relative_to_video>-66 ms</Delay_relative_to_video><Stream_size>56.4 MiB (3%)</Stream_size></track></File></Mediainfo>
Here is details from another clip, used a minute or so:
<?xml version="1.0" encoding="UTF-8"?>
-<Mediainfo version="0.7.63">-<File>-<track type="General"><Complete_name>C:\Users\Barry\Documents\My Documents\My Pictures\Genealogy stuff\Stadnitsky Project\Stadd Macavoz Pictures\Fiddler on the roof part 18.mp4</Complete_name><Format>MPEG-4</Format><Format_profile>Base Media / Version 2</Format_profile><Codec_ID>mp42</Codec_ID><File_size>23.5 MiB</File_size><Duration>9mn 59s</Duration><Overall_bit_rate_mode>Variable</Overall_bit_rate_mode><Overall_bit_rate>32 9 Kbps</Overall_bit_rate><Encoded_date>UTC 2010-01-03 01:13:19</Encoded_date><Tagged_date>UTC 2012-12-29 23:47:44</Tagged_date><gsst>0</gsst><gstd>600443</gstd><gssd>BADC23F64MH1356824360205454< /gssd><gshh>r16---sn-p5qlsn7z.c.youtube.com</gshh></track>-<track type="Video"><ID>2</ID><Format>AVC</Format><Format_Info>Advanced Video Codec</Format_Info><Format_profile>[email protected]</Format_profile><Format_settings__CABAC> No</Format_settings__CABAC><Format_settings__ReFrames>1 frame</Format_settings__ReFrames><Format_settings__GOP>M=1, N=30</Format_settings__GOP><Codec_ID>avc1</Codec_ID><Codec_ID_Info>Advanced Video Coding</Codec_ID_Info><Duration>9mn 59s</Duration><Bit_rate>218 Kbps</Bit_rate><Maximum_bit_rate>549 Kbps</Maximum_bit_rate><Width>320 pixels</Width><Height>240 pixels</Height><Display_aspect_ratio>4:3</Display_aspect_ratio><Frame_rate_mode>Constant< /Frame_rate_mode><Frame_rate>29.970 fps</Frame_rate><Color_space>YUV</Color_space><Chroma_subsampling>4:2:0</Chroma_subsampli ng><Bit_depth>8 bits</Bit_depth><Scan_type>Progressive</Scan_type><Bits__Pixel_Frame_>0.095</Bits__Pixel_ Frame_><Stream_size>15.6 MiB (66%)</Stream_size><Title>(C) 2007 Google Inc. v08.13.2007.</Title><Encoded_date>UTC 2010-01-03 01:13:19</Encoded_date><Tagged_date>UTC 2010-01-03 01:13:19</Tagged_date></track>-<track type="Audio"><ID>1</ID><Format>AAC</Format><Format_Info>Advanced Audio Codec</Format_Info><Format_profile>LC</Format_profile><Codec_ID>40</Codec_ID><Duration>9m n 59s</Duration><Bit_rate_mode>Variable</Bit_rate_mode><Bit_rate>108 Kbps</Bit_rate><Maximum_bit_rate>156 Kbps</Maximum_bit_rate><Channel_s_>2 channels</Channel_s_><Channel_positions>Front: L R</Channel_positions><Sampling_rate>44.1 KHz</Sampling_rate><Compression_mode>Lossy</Compression_mode><Stream_size>7.75 MiB (33%)</Stream_size><Title>(C) 2007 Google Inc. v08.13.2007.</Title><Encoded_date>UTC 2010-01-03 01:13:19</Encoded_date><Tagged_date>UTC 2010-01-03 01:13:19</Tagged_date></track></File></Mediainfo>
4. Yes, NTSC, current screen resolution is 1280 x 1024. I would like advice on what format 4:3 or 16:9 to create/continue the project for playback via DVD on both TV screens and PC monitors.
I can continue using the built in DVD creating program.
The above chart is correct
Yes, .9091 comes after D1/DV NTSC
I'm not clear what mp4 and mpg fields are. One was recorded by me and one off the internet.
5.

Similar Messages

Selection breaks after inserting into dataProvider

I have been battling this issue for a couple of days now. I
have a HorizontalList that is using an itemRenderer component that
I created. When I insert an item into the dataProvider using
addItemAt....
1) the item is inserted
2) i see the item rendered correctly in the HorizontalList
However, the selection breaks. What I mean by this is the
newly added items does NOT highlight when I roll over it and if I
click on it, it does not select. This only happens for the newly
added item, all the others that were already in the list work fine
(highlight and can be selected).
I've tried calling validateNow() on the HorizontalList after
inserting into the dataprovider but it doesn't help at all.
Please help.

I can't believe this, but after 2 days of trying to figure
this out I figured it out just moments after posting to the forum!
Here is what fixed it and I am not sure exactly why. At this
point I don't care...
The dataProvider I was using contained a list of custom
objects. I had a property on the class called uid. When I commented
out this property, everything worked. I don't know what made me
think to try this. I guess my uid property on the class was
conflicting with the uid property on the itemRenderer component or
something.
Finally.

I want to create a cd on my mac that autolaunches an .html-page after inserting into a pc or a mac. Is that possible?l

I want to create a cd on my mac that autolaunches an .html-page after inserting into a pc or a mac. Is that possible?

Solving this requirement on a modern Windows system is going to be problematic too, as the autorun mechanisms are increasingly being locked down over there, if not by the end-user or the system installer, then by the usual anti-malware tools that are installed.
Given this is one of the most vulnerable populations here in terms of operational security, you'll probably want to target online distribution, or to distribute a signed application that can be installed on the target (akin to a managed system) and that then accesses your data on external storage. All that app might do is access the disk, verify that the contents of the device are trusted and valid, and launch the browser.
I'd likely target online distribution or pre-loaded distributions and iOS, as that's where all of the older folks I'm dealing with are headed, too. If not a native app, then maybe a web-app here, and download the contents into the HTML5 local storage.

Audio volume drops in FLV file after inserting into Captivate 4

The audio volume drops almost 50% in FLV files inserted into Captivate 4. Is there a solution for this problem?
Thank you.

Hi Sony,
That was the first thing I ever tried when I discovered the default setting for FLV and slide video (variables and advanced actions are my favorites, as you know perhaps). Perhaps I missed something, and did not try in CP 5.5 or after the latest patch on CP5.0, but this system variable seemed only to have effect on the normal audio clips, not on audio for video?
Lilybiri

ORA-01008 - not all variable bounfd when trying to insert into trigger

Hi,
Uisng Oraclle 11.2.0.3 and trying insert into table on remote schema.
Tracked problem down to one column - the parent_num..
Offending code
a.mult_parent_num = ( select   nvl(MGrp_num, 0)
                            from     [email protected]
                            --where   MGrp_PARENT_num is not null
                            --and
                            where substr(upper(MGrp_DESCRIPTION), 2) = (select MULT_NAME
                                                               from por_multiple p
                                                               where p.mult_link_multiple_code = B.MULT_LINK_MULTIPLE_num)Complete truigger
create or replace trigger POR_TRG_POP_IKNOW_MULTIPLE
after INSERT OR UPDATE or delete   on por_MULTIPLE
for each row
-- tO ENSURE I-KNOW KEPT UP-TO-DATE WITH HOMIS MULTIPLE
-- delib not delet form i-know as if has been used by customer cannot delete
-- due to referential inetgrity constraints in i-know
declare
begin
-- ensure if updating record one of attributes interested in for ho_issues_stg changed
   IF INSERTING OR UPDATING
   THEN
      MERGE INTO [email protected] a
      USING
       select
       :NEW.MULT_ANMW_MULTIPLE_CODE MULT_ANMW_MULTIPLE_CODE,
       :new.MULT_AUTH_REQUIRED MULT_AUTH_REQUIRED,
       :new.MULT_JMW_MULTIPLE_TYPE_CODE MULT_JMW_MULTIPLE_TYPE_CODE,
       :new.MULT_LINK_MULTIPLE_CODE MULT_LINK_MULTIPLE_num,
       :new.MULT_MULTIPLE_CODE MULT_MULTIPLE_NUM,
       :new.MULT_NAME MULT_NAME,
       :new.MULT_PROM_AUTH_REQUIRED MULT_PROM_AUTH_REQUIRED,
       :new.MULT_SELECTED_MULTIPLE MULT_SELECTED_MULTIPLE,
           'Y' MULT_active_flag,
       nvl(:new.MULT_JMW_MULTIPLE_TYPE_CODE, 0) MULT_CHANNEL_NUM--,
      -- :new.MULT_LINK_MULTIPLE_CODE MULT_PARENT_NUM
       from dual
       ) b
    on
       a.mult_multiple_NUM = b.MULT_MULTIPLE_NUM
when matched THEN update set
       A.MULT_ANMW_MULTIPLE_CODE = B.MULT_ANMW_MULTIPLE_CODE ,
       A.MULT_AUTH_REQUIRED = B.MULT_AUTH_REQUIRED,
       A.MULT_JMW_MULTIPLE_TYPE_CODE = B.MULT_JMW_MULTIPLE_TYPE_CODE ,
       A.MULT_LINK_MULTIPLE_num = B.MULT_LINK_MULTIPLE_num,
       A.MULT_NAME =B.MULT_NAME,
       A.MULT_PROM_AUTH_REQUIRED=B.MULT_PROM_AUTH_REQUIRED,
       A.MULT_SELECTED_MULTIPLe=B.MULT_SELECTED_MULTIPLE,
           A.MULT_ACTIVE_FLAG = B.MULT_ACTIVE_FLAG,
       A.MULT_CHANNEL_NUM= B.MULT_CHANNEL_NUM
       a.mult_parent_num = ( select   nvl(MGrp_num, 0)
                            from     [email protected]
                            --where   MGrp_PARENT_num is not null
                            --and
                            where substr(upper(MGrp_DESCRIPTION), 2) = (select MULT_NAME
                                                               from por_multiple p
                                                               where p.mult_link_multiple_code = B.MULT_LINK_MULTIPLE_num)
when not matched
then insert
A.MULT_ANMW_MULTIPLE_CODE,
       A.MULT_AUTH_REQUIRED,
       A.MULT_JMW_MULTIPLE_TYPE_CODE,
       A.MULT_LINK_MULTIPLE_NUM,
       A.MULT_MULTIPLE_NUM,
       A.MULT_NAME,
       a.MULT_PROM_AUTH_REQUIRED,
       a.MULT_SELECTED_MULTIPLE,
       -- NEW FIELDS ON I-KNOW
       a.MULT_ACTIVE_FLAG,
        a.MULT_CHANNEL_NUM,
         a.MULT_PARENT_NUM
values
       b.MULT_ANMW_MULTIPLE_CODE,
       b.MULT_AUTH_REQUIRED,
       b.MULT_JMW_MULTIPLE_TYPE_CODE,
       b.MULT_LINK_MULTIPLE_NUM,
       b.MULT_MULTIPLE_NUM,
       b.MULT_NAME,
       b.MULT_PROM_AUTH_REQUIRED,
       b.MULT_SELECTED_MULTIPLE,
       -- NEW FIELDS ON I-KNOW
       b.MULT_ACTIVE_FLAG,
        b.MULT_CHANNEL_NUM,
     --   711-- parent to have parent_num group name of link multiple code
       ( select   nvl(MGrp_num, 0)
          from      [email protected]
                 --where   MGrp_PARENT_num is not null
                 --and
                   where   substr(upper(MGrp_DESCRIPTION), 2) = (select MULT_NAME
                                                               from por_multiple p
                                                               where p.mult_link_multiple_code = B.MULT_LINK_MULTIPLE_num)
update   [email protected]
set
MULT_PARENT_num =   ( select   nvl(MGrp_num, 0)
          from     bidsaMULTIPLE_GROUPS
                 where   MGrp_PARENT_num is not null
                 and     substr(upper(MGrp_DESCRIPTION), 2) = MULT_NAME
      MULT_CHANNEL_num = nvl(MULT_JMW_MULTIPLE_TYPE_CODE, 0),
      MULT_ACTIVE_FLAG = 'Y'
where
MULT_PARENT_num is null;
else
     update [email protected] p
     set mult_active_flag = 'N'
     where p.mult_multiple_num = :old.mult_multiple_code;
END IF;
EXCEPTION
     WHEN OTHERS THEN
        RAISE_APPLICATION_ERROR(-20010,'Error when writing to i-know multiple '||SQLERRM||' '||SQLCODE);
END POR_TRG_POP_IKNOW_MULTIPLE;What am I doing wrong?

Definitions bleow.
Performanve fine - source table rarelyy changed - a temporary solution until the source system replaced with desination system.
Error:
Error when writing to multiple (sourec table) ORA-01008 - not all variables bound ORA-02063 - preceding line form bisapprd.
- 1008 error during execution of trigger
Source table upon which trigger acting
-- Create table
create table POR_MULTIPLE
mult_multiple_code          NUMBER(4) not null,
mult_name                   VARCHAR2(20) not null,
mult_selected_multiple      VARCHAR2(1) not null,
mult_anmw_multiple_code     VARCHAR2(3),
mult_link_multiple_code     NUMBER(4),
mult_jmw_multiple_type_code VARCHAR2(3),
mult_auth_required          VARCHAR2(1),
mult_prom_auth_required     VARCHAR2(1)
)Destination tables being inserted into
create table POR_MULTIPLE
mult_multiple_num           NUMBER(4) not null,
mult_name                   VARCHAR2(20) not null,
mult_selected_multiple      VARCHAR2(1) not null,
mult_anmw_multiple_code     VARCHAR2(3),
mult_link_multiple_num      NUMBER(4),
mult_jmw_multiple_type_code VARCHAR2(3),
mult_auth_required          VARCHAR2(1),
mult_prom_auth_required     VARCHAR2(1),
mult_parent_num             NUMBER(4),
mult_channel_num            NUMBER(4),
mult_active_flag            VARCHAR2(1) not null
create table MULTIPLE_GROUPS
mgrp_num         NUMBER(4) not null,
mgrp_description VARCHAR2(40) not null,
mgrp_parent_num NUMBER(4)
)

RE:ora-28500 when trying to insert into SQL Server table

Hi all!
I'm getting this when i attempt to insert into my table test in a SQL Server database. As u can see from the select, the database link seems ok. Any ideas plz. Thnx..
SQL> select "idAges" from test@try2;
no rows selected
SQL> insert into test@try2 ("idAges","nARAges","nAPAges") values(10,'','');
insert into test@try2 ("idAges","nARAges","nAPAges") values(10,'','')
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC SQL Server Driver][SQL
Server]Cannot insert explicit value for identity column in table 'test' when
IDENTITY_INSERT is set to OFF. (SQL State: 23000; SQL Code: 544)
ORA-02063: preceding 2 lines from TRY2

IDENTITY_INSERT on works only for particular session and for one table. It's not global variable.
The only idea what I have is to create link from MS Sql to Oracle (right now You have oracle ->ms sql)and then before insert You will set identity_insert on and will run insert.

ORA-00604 error when trying to insert into a XMLTYPE stored as BINARY

Hi. Here's the scenario.
Here's my Oracle version:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
The database is encoded as AL32UTF8.
First I create the table...
create table binary_table (the_field XMLTYPE) XMLTYPE COLUMN the_field STORE AS BINARY XML;
Now I try and do an insert like this...
insert into binary_table values (xmltype('<?xml version="1.0" encoding="AL32UTF8"?>' || chr(10) || '<a>b</a>' || chr(10)));
and I get this error:
SQLState: 60000
ErrorCode: 604
Position: 122
Error: ORA-00604: error occurred at recursive SQL level 1
ORA-00942: table or view does not exist
If I create the table with a CLOB storage option for the XMLTYPE, the insert works fine. If I repeat these steps in another database instance, same Oracle version, that's encoded as WE8ISO8859P1, it also works fine. It behaves the same in several clients. I also tried it with several different values for NLS_LANG and that didn't help.
I do want to say that this database instance has just been set up especially for me so I can do some R&D on AL32UTF8 and XMLTYPE to see if it fits our needs. So it might be a problem with the database instance.
Thanks for taking a look at this.
Ralph
Edited by: stryder100 on Jul 24, 2009 12:11 PM

Hi,
Use this
Load data
append Into TABLE HS_HRMIG_EMP_PER_20MAR07 fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS.
Here optional enclosed by is for doubles quotes which should needs to place in single quotes.
like '"'.
try with this.
--Basava.S

Video shaky ONLY after inserted into timeline

Hey guys, I shot some stuff on green screen, and most of the footage is great (shot in my school studio) except for two segments. The actual capture footage for these is flawless with no problems whatsoever. In the edit window they are fine, but when I mark in/out and drag the clip into the timeline, the video is shaky and almost kind of vibrating when i playback in the preview window. What gives? I've asked a lot of people and they have no idea what the issue is.
The clips, like I said before, are fine, but when I put them into the timeline, then they get all fudgy. I tried SmoothCam and the Stabilizer in Motion, and neither made any improvement (smoothcam might have made it worse, actually...which is odd).
Can anyone shed some light on this? It's much appreciated, thanks.
-Z

Which version of FCP are you using? If you are using 6 or higher, create a new sequence, drop a clip in there and click 'yes.' This will create a sequence that matches your clip exactly. What's going on is that you are cutting standard def footage in an HD sequence. If you don't want to recut, then change your sequence settings to match your clips exactly; you also will want to change your compressor to DVCPro50 or some other DV compression.

Web fonts are blurry/muddy when displaying in browser

It seems that the CSS code that Muse generates lacks a reset or clarification of font weight, either of which would fix this problem (for example, see here: http://css-tricks.com/watch-your-font-weight/). Will this bug be fixed in future versions of Muse? I hate having to go in and fix stuff like this myself, it makes using Muse too cumbersome, as every time I make a change to the site in Muse, I then have to export the files and re-edit them by hand again.
Thanks Muse team, not trying to be discouraging at all, and I really do think you're doing great work—we all know these things take time to perfect!

Hi Brad,
Thanks for your quick response! Here's section of a website I'm working on when I'm still in Muse:
And here is that same section when displaying in Chrome (looks like this in Firefox, too):
See how all the text looks weirdly stroked/muddy?
Thanks again!

DataGrid not reflecting changes after INSERT into Table. Delete from Table does.

Wow, it's been a while.
Hope you guys can help.
This is my DataGrid:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
<DataGrid.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="BorderThickness" Value="0"/>
</Style>
</DataGrid.CellStyle>
<DataGrid.Columns>
<DataGridTextColumn x:Name="NodeColumn" Binding="{Binding node}" Header="VS Number" Width="*"/>
<DataGridTextColumn x:Name="SerialColumn" Binding="{Binding serial}" Header="Serial Number" Width="*"/>
<DataGridTextColumn x:Name="NameColumn" Binding="{Binding name}" Header="Asset Name" Width="*"/>
<DataGridTextColumn x:Name="TypeColumn" Binding="{Binding type}" Header="Asset Type" Width="*"/>
<DataGridTextColumn x:Name="_dateColumn" Binding="{Binding date}" Header="Date Allocated" Width="*"/>
<DataGridTextColumn x:Name="PoColumn" Binding="{Binding po}" Header="Purchase Order" Width="*"/>
</DataGrid.Columns>
</DataGrid>
This is where I add a new Row to the Table:
Private Sub Button_Click_1(sender As Object, e As RoutedEventArgs)
Dim cbblocation As ComboBox = Me.FindName("LocationComboBox")
Dim row As DataRowView = DirectCast(cbblocation.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
Dim cbbtype As ComboBox = Me.FindName("comboBoxType")
Dim cbbtext2 As String = cbbtype.Text
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.AddNewAsset(cbbtext, txbSerial.Text, txbName.Text, cbbtext2, Date.Today, txbPO.Text)
node = cbbtext
Dim mp As New MainPage
mp.RefreshGrid(node)
Me.Close()
End Sub
The RefreshGrid method:
Public Sub RefreshGrid(node As String)
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.FillByNode(RETAILISOAMDDataSet.tableAssets, node)
Dim TableAssetsViewSource As System.Windows.Data.CollectionViewSource = CType(Me.FindResource("TableAssetsViewSource"), System.Windows.Data.CollectionViewSource)
Dim be As BindingExpression = BindingOperations.GetBindingExpression(TableAssetsViewSource, CollectionViewSource.SourceProperty)
be.UpdateTarget()
End Sub
And this is what I use to delete a row from the table (and without doing anything special, the DataGrid auto-updates with the changes):
Private Sub Button_Click_4(sender As Object, e As RoutedEventArgs)
If TableAssetsDataGrid.SelectedIndex = -1 Then
MsgBox("You have selected nothing to Delete!", MsgBoxStyle.OkOnly, "Nothing Selected")
Else
Dim dgv As DataGridTextColumn = Me.FindName("NodeColumn")
Dim row As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText As String = row.Item("node")
Dim dgv2 As DataGridTextColumn = Me.FindName("SerialColumn")
Dim row2 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText2 As String = row.Item("serial")
Dim dgv3 As DataGridTextColumn = Me.FindName("NameColumn")
Dim row3 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText3 As String = row.Item("name")
Dim dgv4 As DataGridTextColumn = Me.FindName("TypeColumn")
Dim row4 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText4 As String = row.Item("type")
Dim dgv5 As DataGridTextColumn = Me.FindName("_dateColumn")
Dim row5 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText5 As String = row.Item("date")
Dim dgv6 As DataGridTextColumn = Me.FindName("POColumn")
Dim row6 As DataRowView = DirectCast(Me.TableAssetsDataGrid.SelectedItem, DataRowView)
Dim dgvText6 As String = row.Item("po")
Dim RETAILISOAMDDataSet As Retail_ISO_AMD.RETAILISOAMDDataSet = CType(Me.FindResource("RETAILISOAMDDataSet"), Retail_ISO_AMD.RETAILISOAMDDataSet)
Dim RETAILISOAMDDataSetTableAssetsTableAdapter As Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter = New Retail_ISO_AMD.RETAILISOAMDDataSetTableAdapters.tableAssetsTableAdapter()
RETAILISOAMDDataSetTableAssetsTableAdapter.RemoveAsset(dgvText, dgvText2, dgvText3, dgvText4, dgvText5, dgvText6)
Dim cbb As ComboBox = Me.FindName("cbbLocation")
Dim row7 As DataRowView = DirectCast(cbb.SelectedItem, DataRowView)
Dim cbbtext As String = row.Item("node")
RefreshGrid(cbbtext)
End If
End Sub
--------- End of Edit
It is bound to a Dataset which gets it's data from a SQL Database.
Loading the Data and Filtering the data based on certain conditions work 100%. The problem I am having is as follows:
I have a form on the Page that takes input and inserts a row into the Database. When this happens, the DataGrid won't automatically reflect the changes (even if I recall the Fill Method of the Dataset). No matter what I do, I have to refresh the entire page
and THEN Fill the Dataset to see any changes.
This is what strikes me as odd...
When I do a delete row operation on the Database (Custom Method on the Dataset with conditions), and just Fill the Dataset again (without doing anything special), the row deletes and the changes is reflected IMMEDIATELY.
What am I doing wrong here? Why would Delete Row reflect the changes on the DataGrid but no Insert Row?
Thanks in Advance.
(P.S. I am very rusty with my developing skills, I haven't done this in YEARS)

>>And what about the the most important question, how exactly is TableAssetsViewSource defined in the XAML markup and what is
its Source property set or bound to? And what about the reproducable sample...?
Here is the Markup of the TableAssetsViewSource:
<Page.Resources>
<local:RETAILISOAMDDataSet x:Key="RETAILISOAMDDataSet"/>
<CollectionViewSource x:Key="TableRegionsViewSource" Source="{Binding tableRegions, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableLocationsViewSource" Source="{Binding tableLocations, Source={StaticResource RETAILISOAMDDataSet}}"/>
<CollectionViewSource x:Key="TableAssetsViewSource" Source="{Binding tableAssets, Source={StaticResource RETAILISOAMDDataSet}}"/>
</Page.Resources>
The ItemsSource of the DataGrid is bound to the TableAssetsViewSource:
<DataGrid DataContext="{StaticResource TableAssetsViewSource}" ItemsSource="{Binding}" x:Name="TableAssetsDataGrid" AutoGenerateColumns="False" EnableRowVirtualization="True" Margin="15,10,10,10" RowDetailsVisibilityMode="VisibleWhenSelected" Grid.Column="1" HeadersVisibility="Column" CanUserResizeRows="False" IsReadOnly="True">
Just remember, this code was auto-generated with the drag & drop onto the Page, so I did little in terms of setting the actual bindings.
All in all, what I have done so far works as intended, except that when I want to add a row to the table it does not reflect, and that it only shows after refreshing/restarting the application.
I will try and put together a reproducable sample.

"The disk you inserted was not readable by this computer" box appears when printer cable inserted into USB connection.

When I plugged my printer cable into my MacBook today I received a message "the disk you inserted was not readable by this computer" with options to Ignore or Eject. The printer worked fine yesterday but does not respond today. Additionally there is abox titled "All Messages" appearing on my screen which is producing new messages every minute or so the most common of which is disk1: I/O error and disk1:alignment error, SAM Multimedia: Read or Write failed.
I tried unsuccessfully yeseterday to install a scanner on this MacBook.Everything seemed to progress normally during the install but the Scanner did not show in my applications after my attempt to install.
Any ideas?
Thank you in advance

I uninstalled and reinstalled my printer and everything seems to work fine now.

Playback control changes when animation is inserted into anothr movie

Hi,
I have created a couple of movies and used a specific
playback control. When these movies (saved in swf format) are ran
separately, everything is fine and the appropriate palyback control
is shown. However, when I insert these animation (swf) into another
project, the playback control are different of this animation are
different !!! Any idea ?

Hi,
The problem still exists even if I have re-created the child
movies (swf version 8) with other playback control.
I have removed the playback control of the child movies and
then just re-imported them back to the master movie. The master
moview has been then published to EXE and it is fine (the child
movies dies not show anymore the playback control).
Then i have re-inserted the playback control into the child
movie, and re-imported them back into the master, then the master
published to EXE. And the problem is back, the child movies are
showing a diffeent playback control (the same as dpierre - the skin
used is dark grey, align top left, and the buttons don't actually
work.)
Is there a way to clear any cache that exists in the files
(if the problem is the chache) ? I have a huge project with 20-25
child movies to import into the master movie. It looks like a bug
?

Swf not working after inserted into dreamweaver

I'm rather new to flash and Dreamweaver CS5. I created a media playback swf that displays pictures. It works perfectly when I view it in Flash but when I insert the swf into my website in Dreamweaver the images do not show up, the backgound and everything else show up in my preview in Dreamweaver but no images....All the images and swf files are all in the same directory, all the code looks correct to me but I cannot figure out what is wrong. Any help would be greatly appreciated.
Thanks,
Kurt

this is my test page....
www.themoderatorsband.com/picturesnew.html

Blurry images when I combine files into a PDF with Acrobat

I have created 4 files in Photoshop with a combination of graphics and text. I am trying to make a PDF that can be emailed, so it only has to look good onscreen. I have saved each file in numorous ways (jpg, tiff, pdf, bmp etc...) I have eliminated any compression. When I pull the files up individually they look great, but when I try and combine them in a PDF the images get blurry. I have selected the largest file size, change compression for jpg (and the others) in acrobat. I can't figure out what I am missing. Why do the files look good until I combine them?

A little confusing. How to eliminate compression when using JPG or PDF?
If you export the images from Photoshop to PDF, will they look good on screen? If so, and you import and combine in Acrobat, they should not be changed, unless you select "Save as optimised PDF", because then optimisation settings could re-encode the images to lower resolution.

How do I swap out jpgs for tiffs after importing a project edited in Pr, to AE?

the original Pr project was created from an image sequence of jpgs.
I'm doing stop motion using Dragonframe to capture the images and here's the workflow i was refered to
Dragon Frame (DF)
Capture in Hi-Res (RAW) and low res jpegs.
Export 720P file for editing in Premiere (establish file name).
Light Room (LR)
Resize RAW files to 2K(tiff), flatten image
Export 2K image sequences (name the same as 720P files)
Premiere (PR)
Cut 720P files to a picture lock.
After Effects (AE)
Import Premiere project.
Swap out 720P files for 2K(tif) image sequences.
Work on shots as compositions.
Composite environmental elements.
Remove rigs.
Export final project.</li>
</ul>

File --> Replace Footage
Mylenium

Blurry Jpgs when displaying after insertion into project

Similar Messages

Maybe you are looking for