BO for pp01

Hello friends.
I have a requirement, to trigger a workflow when a position is created.
Can anybody please tell me what is the approach or what is the BO for the tcode PP01.
Thanks and regards.

Check this BO
PDOTYPE_S  Position
PDOTYPE_SH HR Position
Thanks
Arghadip

Similar Messages

  • LSMW for PP01 Tcode

    Hi all,
    I have a requirement in which I need to use LSMW for Tcode PP01 to update some fields of a custom OM Infotype.
    My question is : Is it okay to use LSMW for PP01 tcode or whether I should go for BDC ?
    Are their any constraints in using LSMW for PP01 Tcode ?
    Kindly assist

    you can use LSMW method, because its have screen level validation , if you can go for BDC you need to write logic for validation....

  • User Exit for PP01

    Is there a user exit for PP01.  I want to trigger something off the back of a position getting created.

    List of exits
    Enhancement/ Business Add-in            Description
    Enhancement
    RHGB0001                                Function Group RHGB Customer-specific field (list)
    RHIV0001                                OrgManagement: Customer-specific number assignment
    Business Add-in
    HRBAS00_T77S0                           HR: Switch Attributes
    HRBAS00_STRUAUTH                        Business Add-In for Structural Authorization
    HRBAS00_SEARCH_EXCL                     Exclusion of Individual Search Help
    HRBAS00_SEARCH                          HR: Object Search
    HRBAS00_RHBAUS00                        Business Add-In for RHBAUS00
    HRBAS00_RELAT                           HR: Exit for Relationships
    HRBAS00_GET_PROFL                       Determine user profile from table T77PR
    HRBAS00INFTY                            Update By
    ARC_BC_HROBJ_WRITE                      Archiving Object BC_HROBJ: Additional Table Entries
    ARC_BC_HROBJ_CHECK                      Archiving Object BC_HROBJ: Archivability Checks

  • Workflow for PP01 ( Maintain Data)

    Hi Experts,
    Could you please let me know the workflow for PP01 ( Maintain Data ). whenever the Object type is  changed from Active/Planned/Submitted/Approved/Rejected.  an E-mail has to be sent through Workflow.
    Thanks in Advance.
    Regards
    Santosh Kumaar.M

    There are some events that are triggered on changing data........
    you can go to swels to activate the event trace
    and swel to read it.......
    change the data and identify the event getting triggered.......
    go to swe2
    to identify if there is any workflow available linked to this event and then activate the linkage...... if available otherwise you can put your custom workflow with the event....
    Regards,
    Divya

  • BDC for PP01 ( Delimit the record )

    Hi Genius,
        Am recording The Transaction PP01. in During Recording popup screen does not appear.
    But in program execution POPUP screen appear.. how to skip this popup or how to record this screen.

    Hi,
       I am also working on a similar requirement for prices conditions, i have tried BAPI_PRICES_CONDITIONS,
    i am unable to find the record in KONH table, i even used RV_CONDITION_MAINTENANCE though it creates the record but
    uses gui screen as VK11 we don't want that. Any suggestions will be help ful thankyou.

  • LSMW for PP01

    Hi gurus.
    We are trying to input some data for HRP1001, linking P with S.The HCM consultant prepared a LSMW mapping PP01 but we start it, it appears this ,msg on screen:
    Field PPHDX-RECORD_NR (not allowed entries).
    And the positions (S) are not updated.
    Regards.

    Remove this field from recording. This field is not shown while linking Person to a Position.
    This field displays the record number ...
    Record 1 of 1.

  • LSMW for PP01 infotype 1050 -Job Evaluation results

    While doing the recording for IT1050 using LSMW, in the Process recording field the field for Job evaluation results doesn't get picked up.
    When the recording is done, in the maintain Object Attributes step of LSMW, I select the Object type as S , enter an object ID and then select the Job evaluation result infotype and then click on create. I enter the values in the respective fields and then save it. Now I am in the Process Recording screen and I enter the field details. There in the INS screen the Markfield value for the Job evaluation result infotype is not getting picked properly.
    Can u plz help as to what settings need to be done for correctly inserting the infotype fields with the values provided?
    Thanks!!
    Regards,
    Vijetha

    Hi Bala,
    Thank U for the reply.
    I tried it using the PP02 and i cud successfully complete the LSMW process.
    Thank You.
    Regards,
    Vijetha

  • Authrorization for Training and event management module

    HI Friends,
    I am facing an issue related to authorization for users in TEM module. I have created new role by copying Standard Role ofu201DSAP_HR_PE_TRAININGADMINu201D Training Administrator. I have activated only TEM related transactions in u201CP_TCODEu201D in Human Resource Node.
    I have assigned this role to user. I executed transaction u201CPSV2u201D. I can see training Catalog but when I go in to any business event group or type and then select u201CChangeu201D button, System displaysu201D No Authorizationu201D.
    I executed Su53 to check which auth is missing. System needs PP01 transaction in P_Tcode and S_Tcode part.  We canu2019t give PP01 auth to users.
    Could you please suggest any solution for this issue? Or how can we restrict auth for PP01 with object types related to Tem module so that user canu2019t see details maintained for other objects like job, position etc.
    Kindly help me regarding this issue.
    Thanks and Best Regards
    Puneet

    Hi,
    it si possible to restrict the access to specific object types. You can do it via structural authorizations, or using authorization object PLOG. assign this object to the user, and just assign under OTYPE the objects the user should access.
    Rergards,
    Ana

  • Bdc  PP01

    Hi friends,
    I have a BDC for PP01 that delimits cost center for a position  and assign a new cost center , it shows record created . In pp01 i am getting the new cost center  with old one delimited properly . But when I go to holder of the position in Pa20 , I  am not getting the new cost center it still shows old cost center.
    Thanks a lot.

    Hi,
    you have to start the report RHINTE30.
    please also
    have a look at
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/bb/bdc1e8575911d189240000e8323d3a/frameset.htm
    Regards
    Bernd

  • PP01 BADI

    Hi All,
    I have a requirement in which i need to update the PA0001 infotype with the Supervisor Details ,when a position is assigned with the Realtion A 002 in "PP01".
    So in PP01 when the relation reports to is assigned then we need to update the infotype PA0001,
    Where i have to write the code, Help me whether it is a BADI or User Exit.
    Actually i need to write the code in a badi for PP01 Transaction, not at the infotype level.
    The requirement is when a pernr is assigned with A 003 relation, then the Infotype 0001 should be updated with Supervisor details.
    Thanks & Regards,
    Naresh
    Edited by: NareshBD on Dec 7, 2011 10:47 AM
    Moderator message : Duplicate post locked, continue with original thread.
    Edited by: Vinod Kumar on Dec 7, 2011 3:58 PM

    Hi,
    There are 3 BADI's available which are listed below.
    HRBAS00_GET_PROFL
    HRBAS00_STRUAUTH
    HRBAS00INFTY
    HRBAS00INFTY would be opt for your requirement.
    Regards,
    Syam.

  • Is there a display Tcode for PP02 Tcode?

    Hi all,
    I was wondering if there is a display only Tcode for PP02 as they have PP01_DISP for PP01. I tried PP02_Disp and PP02d but no use.
    Thanks..         

    Don't think so. Check out TSTC table, it lists down all the existing t-codes and given table doesn't show any display transaction for PP02.
    Rgds
    Neha

  • What are the tables updated by transaction PP01?

    HI,
    Can anyone help me out finding tables updated by PP01 transaction.
    Thanks,
    Anil.

    Hi
    1) The Data Base trace: before you enter in the option that will read the data you want, open a new section and run transaction ST05. Press start trace 'Trace On'. Go back to the other section and proceed with the action. When the data you want appear in the screen, go back to the sectio where the ST05 is on and press 'Trace Off' and 'Trace List'. You will have a list of all tables read by R/3.
    2) If you know the the program name where the data you want is used, you can use the SE38 transaction. It will show all tables read and updated/used by the program
    For PP01 program is  SAPMH5A0.
    With Regards
    Nikunj shah

  • Production Order Type In Costing.

    Hi Gurus,
    i have some Doubts in Costing, i have Run The Ck11n and Released it it is updated in MM Costing View.
    1. i have completed All the Production process andAfter the Goods Recipt I tried to settle the Order in ko88.i got error that variance shuold be calluclated  before settling the order. then i tried to calluclate the variance for the order there i got error stating no cost collector could be determined, creat cost collector.
    then i tried to creat cost collector i got error that the order type is ctegory 10 it is not suuported to cost cgange catogiry 05.
    1. sap  standard order type pp01 holds category 10. then why systm is not allowing to create cost collector for pp01?
    2. is it mandatory to use order category 05 if we want to use costing for the production order type.?
    Regards,
    Venkat.

    Venkat,
    You do not enter a production version in the order. The system cannot assign the order to any product cost collector. To solve this problem you create the order for the production version.
    you have defined that the product cost collector is created for the production version. The corresponding product cost collector exists in the system. However, you create the order for BOM and routing.
    Follow this link and do the set up first.
    Order TYpe for Cost Collector
    Thanks
    Hrusikesh

  • LSO Training room and Qualifications

    Hi Friends,
    I am new to LSO and i am doing data migration for LSO with LSMW tool, i need to create the following
    1. Training Events Rooms
    2. Employee Qualifications (Object Q)
    How do i create these?
    which transaction code do i need to record the above data and what are the steps to be followed.
    Regards,
    Lee.

    Employee Qualifications (Object Q)
    Since it is an object i think LSMW for PP01 Tcode would be better
    Lets wait for other expert views

  • Create OM data without BDC

    Hi
    I have to upload data for OM module for PP01 tcode and i dont want to go for BDC  which FM i should use pls help me out
    Regards
    Meeta

    The easyest way is by the FM RH_INSERT_INFOTYPE.
    Starting mainaining the Infotype 1000 and then all the next you need.
    If you don't know the OBJID of the Object you are creating then use this FM to know it.
    CALL FUNCTION 'RH_GET_NEXT_NUMBER'
            EXPORTING
             action                           = 'DIRECT'
              ext_number                       = lv_objid
              otype                            = lv_otype
              plvar                            = gv_plvar
        TEST_MODE                        =
           IMPORTING
             number                           = lv_objid
           EXCEPTIONS
             invalid_action                   = 1
             number_must_be_zero             = 2
             invalid_object                    = 3
             no_external_interval_found       = 4
             no_internal_interval_found       = 5
             invalid_number                   = 6
             no_more_numbers_available        = 7
             OTHERS                           = 8
    enjoy

Maybe you are looking for