LSMW for PP01 Tcode

Hi all,
I have a requirement in which I need to use LSMW for Tcode PP01 to update some fields of a custom OM Infotype.
My question is : Is it okay to use LSMW for PP01 tcode or whether I should go for BDC ?
Are their any constraints in using LSMW for PP01 Tcode ?
Kindly assist

you can use LSMW method, because its have screen level validation , if you can go for BDC you need to write logic for validation....

Similar Messages

  • LSMW for PA40 Tcode

    Hi all,
    I have created a LSMW for the Tcode PA40 to upload the employees data for the initial infotypes 0000,0001,0002.   The record uploaded successfully.  But the employees no. is generated by skipping one dummy no.
    For example, if 2 records I am uploading means,
    Employee no.
    1006455    -   Uploaded succes
    1006456    -   skipped
    1006457   -    Uploaded.
    How to stop the employee no. skip as dummy.
    Regards,
    Raj

    Yes Mr. Raj,
    In the case of uploading, or when doing the cut-over activity the numbers ranges must be kept in External Range.
    Once the system goes live you can keep it as internal.
    Regards
    Venu

  • LSMW for PP01

    Hi gurus.
    We are trying to input some data for HRP1001, linking P with S.The HCM consultant prepared a LSMW mapping PP01 but we start it, it appears this ,msg on screen:
    Field PPHDX-RECORD_NR (not allowed entries).
    And the positions (S) are not updated.
    Regards.

    Remove this field from recording. This field is not shown while linking Person to a Position.
    This field displays the record number ...
    Record 1 of 1.

  • LSMW for PA70 Tcode and APPRAISAL infotype in HR ABAP

    Hi Experts,
    Please help on this, how to create LSMW for PA70 transaction and appraisal Infotype in HR ABAP.
    Thanks,
    Kumar.

    Try searching BDC for table control.
    Lot of things are available you need to include that .
    For Appraisal.
    Check using below FM and try to develop a legacy data upload prog
    RHPA_APPRAISAL_DELETE - To delete the appraisal
    RHPA_APPRAISAL_ACTIVATE - To activate appraisal before modification
    RHPA_APPRAISAL_READ - To change rating and status for an employee
    RHPA_APPRAISAL_1045_MODIFY - To modify rating and change date for appraisal
    RHPA_APPRAISAL_HISTORICIZE - To change status of appraisal to completed
    Performing all actions in order should help to load appraisals.
    Thanks

  • LSMW for PP01 infotype 1050 -Job Evaluation results

    While doing the recording for IT1050 using LSMW, in the Process recording field the field for Job evaluation results doesn't get picked up.
    When the recording is done, in the maintain Object Attributes step of LSMW, I select the Object type as S , enter an object ID and then select the Job evaluation result infotype and then click on create. I enter the values in the respective fields and then save it. Now I am in the Process Recording screen and I enter the field details. There in the INS screen the Markfield value for the Job evaluation result infotype is not getting picked properly.
    Can u plz help as to what settings need to be done for correctly inserting the infotype fields with the values provided?
    Thanks!!
    Regards,
    Vijetha

    Hi Bala,
    Thank U for the reply.
    I tried it using the PP02 and i cud successfully complete the LSMW process.
    Thank You.
    Regards,
    Vijetha

  • Regarding LSMW Recording for Custom TCodes

    Hi Experts,
    Can we do the recording in LSMW for Custom TCodes.Actually I have created a table(fields with data elements,provided technical settings) through LSMW Batch Input Method Recording.When I specify the file in 7th step it goes to dump.Could you please help me how to do this problem?

    Yes LSMW recording can be used for Custom TCodes, that is actually the main purpose for the recording option.
    Why you get a dump can only be determined by reading the dump. Usually this info is among the first 7 pages .

  • Explain how to use standard LSMW for MM01

    Can anyone explain how to use standard LSMW for MM01 Tcode.pls explain briefly.

    Hi
    Create a project using 0020 as method.
    Max

  • LSMW for MB1B

    Hello,
    Can any one help me LSMW for MB1B tcode.
    Header details : Movment type,Plant,storage location
    Item details     : Receiving plant,Mat no ,qty ,batch no.
    Regards,
    Chitra

    ok,we can use recording.
    one recording,we have 2 input structure  ( Header + Item).
    1.How will you make relationship between source and target.
    we dont know,while execution how many item record will come for item part?
    2.While recording how will you do it?
    Regards,
    Chitra

  • LSMW for Asset Data (Tcode-AS01)

    Hello All,
    I am working on LSMW for Asset master data creation for transaction AS01. When i go to tcode AS01 there is a field with description called "NUMBER OF SIMILAR ASSETS". The LSMW program for the asset data uses two structures BALTD and BALTB. But the field description field is not available in these stuctures. So i am not able to create asset data through t code AS01.
    Can anybody help me out. I will reward you with points. 
    Thanks,

    Hi,
    The number of similar assets
    enables you to create multiple similar assets in one master transaction. These assets initially differ from each other only by their main and/or sub-number. When you save, you can also enter a description and inventory number for each individual master record.
    This function does not allow you to create multiple assets that automatically have the same long text.
    In order to work with lsmw you are creating asset in reference to old asset number/subnumber. i think the default number of assets are 1. in case you require more assets to be created of same type you may have to pass different long texts.
    Reward if find useful.

  • Lsmw for tcode QS21

    Hi,
    I have to upload the data for the tcode QS21 for which there is a proper system available in the system,but i don't know how to use it ? i am new to the LSMW ,can anybody provide me guidelines that how to use it.

    goto LSMW tcode
    goto 1st step
    and select 3rd method(BAPI)
    Business Object       QPMK         Master inspection characteristic
    Method                    SAVEREPLICA                 Replication of QM master
    Message Type          QPMK                        Replication of QM master
    Basic Type                QPMK01                      Replication of QM Master
    2nd step
    create one strcture name
    3rd step
    create your strcture fileds
    4th step
    mapping the strcture
    5th step
    map your strcture fileds to standard strcture
    7th setp  select your files
    8th step  assging your files
    then follow next steps...

  • Error in the LSMW for vendor master using standard batch/direct input

    I am facing the problem in the LSMW for the Vendor master data. The vendor is initially created for the company code 350 by using LSMW. NOw when I try to uploasd the same vendor using the same LSMW for the company code 450 then I get the error in the Bach input creation as follows:
    Batch Input Interface for Vendors
    FB012                    Session 1 : Special character for 'empty field' is /
    FB007                    Session 1 session name VNDR_CREATE_ was opened
    FB104                    Trans. 2 XK01 : Acct already exists; general area not being processed
    FB125                    ... Data in table BLFA1 cannot be processed
    FB016                    ... Last header record ...
    FB014                    ... BLF00-STYPE 1
    FB014                    ... BLF00-TCODE XK01
    FB014                    ... BLF00-LIFNR 300951
    FB014                    ... BLF00-BUKRS 402
    FB014                    ... BLF00-EKORG /
    FB014                    ... BLF00-KTOKK VEND
    FB017                    ... Last data record ...
    FB014                    ... BLFA1-STYPE 2
    FB014                    ... BLFA1-TBNAM BLFA1
    FB014                    ... BLFA1-ANRED /
    FB014                    ... BLFA1-NAME1 SAVOIE AUTOMATISME DEXIS
    This is because when we use XK01 to create the vendor by using the

    Please check this answered link:
    Re: LSMW for Vendor Master
    LSMW Upload vendor master data
    Edited by: Afshad Irani on May 5, 2010 12:42 PM

  • Problem on LSMW for STPO

    Dear all,
    I had try upload STPO by LSMW with PO standard object
    ( Object: 0085, Method: 0001, Program Name: RM06EE10, Program Type: Direct Input),
    but 2 error message is come out at the last stage - Start Direct Input Program :
    message 24 - "Order type UB is not allowed"
    message 6 - "Item category U not allowed".
    Do any one has any idea on it ? I can't found out any issue from OSS.
    Thanks !
    Regards,
    Eric

    HI Eric
    I hope this is relating to Tcode  Me21n in R3 and you want to upload STPOs in R3.
    Actually me21n does not support LSMw for some reason.
    kindly go through this post .
    Re: LSMW For T-code ME21N
    we tried in my last project but could not suceed and ultimately we did though program using BAPI.
    Regards,
    Nimish sheth
    pls rewards points for helpful answers.

  • LSMW for Vendor Master (t-code XK01)

    Hi guys,
    I'm creating a LSMW for Vendor Master (t-code XK01) using direct input but the following error message appears:
    In the step "Create batch input session", I get the following error:
    FB012 Session 1 : Special character for 'empty field' is /
    FB007 Session 1 session name VENDOR was opened
    FB112 Trans. 1 : No transaction code was transferred
    FB016 ... Last header record ...
    FB014 ... BLF00-STYPE 1
    FB014 ... BLF00-TCODE /
    FB014 ... BLF00-LIFNR DETES998
    FB014 ... BLF00-BUKRS /
    FB014 ... BLF00-EKORG /
    FB014 ... BLF00-KTOKK 0001
    FB013 ....Editing was terminated
    I mapped the TCODE filed using xk01 and the same error still displays; in the first step I select Object 0040, method 0002 and the program is RFBIKR00, is this correct?
    Some of the fields are stored ina different table; How can I mapped this fileds?
    Any you can provide will be great......

    Hi,
    Are you getting this error immediatly or later half?
    1. This could be with same Vendor number which would be existing in the system.
    2. Data inconsistencies.
    What are the flat files that you have is it a single file or more than one?
    Thanks,
    Prashanth

  • LSMW for Vendor master

    Hi All,
    I am trying to use LSMW for Vendor Master upload.
    I have gone through all the steps and it is showing correct data in "Display Read Data".
    Also the data in "Display Converted Data" is correct.
    However when i am running step "Create Batch Input Session" , it is giving following errors:
    (1) Transaction XK01 is not supported
    (2) editing ws terminated.
    Wt could be possible reason for this,I am using standard Batch method for object 0040 and program name RFBIKR00.
    ("Maintain Object Attributes" details).

    hello,
    in the field mapping step, check whether tcode field has been assigned as XK01 properly.
    Reward Points if it is Useful.
    Thanks,
    Manjunath MS

  • Topic: LSMW for twoTCODEs at a time

    Hi experts,
    1.can we upload the data for two transaction at a time.
    eg. i want to upload the data for quotation in ME41 .once the quotation is created we have to maintain quotation in tcode ME47. Is it possible. How please explain me.
    2.I have 3 legacy files to upload. In that 2 files for one tcode & 1 file for another tcode. How can i define it according to Tcode. How to maintain the relationship between the strucures? Do we need to code for this? can u explain me from LSMW step 2 to 6 for this requirement.
    thanks in advance

    Hello,
    The first thing to do, is to specify TWO (or more) transaction recordings in step 1.
    Then, in step 2, you should specify the source structures - one for every transaction recording.
    In step 3, you should maintain fields for your structure.
    In step 4 you relate recordings with source structures.
    In the next few steps, you'll have to assign fields, specify your files, then assign files to structures.

Maybe you are looking for