BO XI & CR product and service patch version number

hi,
anyone know
(1) how to find out the product & service patch version number matrix for BO XI and CR ?
e.g. I found from my BO XI that the version is 11.0.0.748, but don't know any service patch has applied.
can find a list like:
BO XI => 11.0.xxxx
BO XI R2 => 11.xxxx
BO XI R2 SP1 => 11.xxxx
CR XI => xxxx
etc.
(2) can a CR report created by CR version 11 be run in BO XI R2 ? what is the compatibility of BO XI and CR ?

Hi Eddie,
Adding more: how to get which all versions of BusinessObjects and Crystal Reports is installed on server or on client?
1. To get to know about the Service Packs for CR and BO:
-  Go to Start > Control Panel > Add or Remove Programs > here you will get the list of Crystal Reports and Business Objects Product along with the Service packs and Fix Packs  too.
However if BO has MHF or CHF then this information you will not get in Add or Remove programs.
2. about which MHF (Monthly Hot Fix) or CHF (Critical Hot Fix):
For BO:
Go to My Computers > Installation Directory: \ Program Files > BusinessObjects Enterprise 11.5 > Patch Folder (inside this folder you will get the details)
For Crystal Reports:
The information on what updates have been installed in Crystal Reports XI Release 1 can be found in C:\Program Files\Business Objects\Crystal Reports 11\Patches\History.txt.
Hope this helps you.
Regards,
Deepti Bajpai

Similar Messages

  • Need list of Crystal Reports Version Numbers by Product and Service Pack

    Hi All,
    Where can I get a list of Crystal Reports Version Numbers by Product and Service Pack? I'm trying to figure out which version we have is the most current version, because we have so many version installed threw out our company.
    Thanks.

    Hi Matt,
    Please check the crystal Report 2008 product versions
    Cr 2008+SP0 - 12.0.0.683
    Cr 2008+SP0 + FP1 - 12.0.0.796
    Cr 2008+SP0 + FP2 - 12.0.0.840
    Cr 2008+SP0 + FP3 - 12.0.3.900
    Cr 2008 + SP1 - 12.1.0.882
    Cr 2008 + SP1 + FP1.1 - 12.1.1.957
    Cr 2008 + SP1 + FP1.2 - 12.1.2.996
    Cr 2008 + SP1 + FP1.3 - 12.1.3.1028
    Cr 2008 + SP1 + FP1.4 - 12.1.4.1068
    Cr 2008 + SP1 + FP1.5 - 12.1.5.1096
    Cr 2008 + SP1 + FP1.6 - 12.1.6.1116
    Cr 2008 + SP1 + FP1.7 - 12.1.7.1144
    Cr 2008 + SP1 + FP1.8 - 12.1.8.1176
    Cr 2008 + SP1 + FP1.9 - 12.1.9.1290
    Cr 2008 + SP1 + FP1.10 - 12.1.10.1390
    Cr 2008 + SP1 + FP1.11 - 12.1.11.1454
    Cr 2008 + SP2 - 12.2.0.290
    Cr 2008 + SP2 + FP2.1 - 12.2.1.412
    Cr 2008 + SP2 + FP2.2 - 12.2.2.453
    Cr 2008 + SP2 + FP2.3 - 12.2.3.467
    Cr 2008 + SP2 + FP2.4 - 12.2.4.507
    Cr 2008 + SP2 + FP2.5 - 12.2.5.537
    Cr 2008 + SP2 + FP2.6 - 12.2.6.567
    Cr 2008 + SP2 + FP2.7 - 12.2.7.598
    Cr 2008 + SP2 + FP2.8 - 12.2.8.638
    Cr 2008 + SP2 + FP2.9 - 12.2.9.698
    Cr 2008 + SP2 + FP2.10 - 12.2.10.810
    Cr 2008 + SP3 - 12.3.0.601
    Cr 2008 + SP3 + FP3.1 - 12.3.1.684
    Cr 2008 + SP3 + FP3.2 - 12.3.2.753
    Cr 2008 + SP3 + FP3.3 - 12.3.3.812
    Thanks,
    Naga.

  • My Iphone4 Home button sometimes work nicely and sometimes it stop working. India Apple care says they cant give me even paid support because i bought phone from Australia. i don't know what to do. i m disappointed with the product and service support

    My Iphone4 Home button sometimes work nicely and sometimes it stop working. India Apple care says they cant give me even paid support because i bought phone from Australia. i don't know what to do. i m disappointed with the product and service support

    When you buy an iPhone in the U.S. it's locked to that country with the carrier you bought it for.
    If you bought the device unlocked in the U.S. it's unlocked, you can use it on any carrier. Even one's outside the country.
    If you want to do a repair on a device you bought in the U.S. and your using it in another country, you must send it back to the U.S. Why? That's where you bought it from.
    AppleCare Protection Plans and AppleCare Limited Warranties are registered to your hardware.
    Your hardware is your iPhone.
    Wherever hardware that was bought then that's the country it was designed to be used in and that's where it was manufactured.
    Apple is very localized - if you call U.S. tech support, you'll speak to somone in your country.
    So, what does all this mean?
    In order to do a repair, you need to send it back to the country you got it from.
    And we're all customers like you. We understand that you're upset, but Apple isn't gonna bend the rules to one individual.
    Policy is policy. Get over it.

  • I have a Photoshop CC subscription but I cannot see it in "My products and services"

    I have a Photoshop CC subscription but I cannot see it in "My products and services".
    I tried to follow http://helpx.adobe.com/x-productkb/global/find-serial-number.html , but that DOES NOT HELP.
    Thanks.

    Hi ytwong,
    I am Email ing you an link which you have already recieved in mail when your was placed & approved. By using that link you got in the mail or that I will Email you, you will be guided appropriately.
    You have an active subscription.
    Kind Regards,
    Rajshree

  • Cisco products and services comparisons

    Wasnt sure where to post this...was hoping somebody could point me in the right direction...
    anybody have any site, whitepaper, document of any kind that gives an outline of products and services comparison between cisco products and other network equipment (ie...vs Juniper, vs Brocade, vs Nortel, etc...)
    thanks in advance.
    Bruce

    Hi Bruce,
    If youre a partner you can access the partner portal which has a small bit of competitive info.
    http://www.cisco.com/web/partners/sell/competitive/routing.html
    http://www.cisco.com/web/partners/sell/competitive/index.html
    Cheers,
    Conor

  • Transport products and software component version

    Hi,
    I created a Products and its Software Component Version in System Landscape Directory of XI development.
    I imported this Software Component Version into Integration Builder and developed design and configuration objects.
    The scenario is completed and now I want to transport the Products and Software Component Version to XI Production.
    Could someone please explain the transport procedure.

    Hi Shravan,
    Thanks four your instructions. I would like to have more details on the export/import procedure. Please confirm the following steps are correct:
    From SLD of XI development:
    1/ Edit new product and its software component version.
    2/ Click on icon Export: XI generates a zip file and downloads it in c drive.
    From SLD of XI Production:
    1/ Select Import utility under system catalog.
    2/ Browse and select the zip file
    In XI production there are existing third party products, and I do not want the transport of this new product causes any problem.
    Design and configuration objects will be exported/import ed after the successful transport of product and software component version transport. 
    Regards,
    Daniel

  • Production and Service order Release Log updation

    Hi,
    Can any one help me how to update the release log of Production and service order.
    I have a requirements to add new custom logs to the production and service order release process.
    sudha

    As far as I know the standard behaviour is that the PR is created upon order save and not upon the status of the order or items changing to released.
    To get around this you can set user status and use status management to prevent the PR getting created or use the BADI CRM_SRV_FIND_LOG_SC to supress creation of the PR.
    Hope this helps.

  • Nothing Appears Under My Products and Services

    I purchased Premiere Elements through Adobe online and downloaded it. I don't know if I ever registered it or what that even does. Now that I have my new computer I tried to download it again, but fould out that I deleted the email with my serial number. So I looked under My Products and Services but it says that I have none. Is there any way that I can get another email sent to me with my serial number?

    KJFist the next step then is as follows:
    If you have already checked Adobe.com for your serial number, and haven't received an email from Adobe, Chat with Adobe.
    For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to resolve the issue you have described.  Also if you can locate your purchase it would be beneficial in case they are not able to locate your account under a different e-mail address or phone number.

  • Products and Services listing for supplier master

    All,
    I am on R12 and adding a new supplier using payables resp.
    One of the details which i can add for suppliers is "Products and Services". Can someone please advise from where is this list being picked up ? Any lookup table.
    I have a requirement to add some more products with there brands to this list based on my business requirements.
    Thanks, Vishal.

    Hello,
    Try to check in the responsibility "Supplier Profile Manager" (iSupplier Module) if there is a configuration for Products and Services.
    HTH,
    Vikram

  • I bought and downloaded CS3 - Production Premium in 2008.  I no longer have the option to download on the "My Products and Services" page.  Why?

    When I go to "My Account" under "My Products and Services" I can see my purchase associated with my account but there is no longer an option to download.
    Any help please?
    Thanks you in advance!

    Ppgiron you can contact our support team to re-enable your downloads at Adobe - Contact Support – Download and Installation.  Alternately you are welcome to download the installation files at Download CS3 products.  I would recommend making a back up in case you need a copy of the installation files again in the future.

  • I purchased elements 12 last year. When I launch the program it tells me my trial subscription ended. I had purchased the product and put the serial number in? Thoughts

    I purchased elements 12 last year. When I launch the program it tells me my trial subscription ended. I had purchased the product and put the serial number in? Thoughts

    Moving the discussion to Photoshop Elements.
    Thanks,
    Atul Saini

  • NB205 - very poor product and service, do not buy Toshiba!! Completely dead in 6 months

    I am posting this to warn as many people as possible to avoid buying Toshiba in the future.  Not only was the product faulty, which I can understand sometimes happens w mass production.  But the service was completely unacceptable, which was the deciding factor for me.
    1.  My new Netbook NB-205/BL started intermittently shutting down for no reason (complete black screen, not even to blue screen).  By the time I returned home from my trip it had stopped working altogether.  The power light will come on, and the fan/hard disk will try to spin for a split second and then go silent and stop completely.
    2.  Upon calling tech support who walked me through a bunch of diagnostic attempts (removing and re-inserting battery, etc.), they concluded it was dead and I needed to send it in.
    3.  The only thing I really care about is my data as I had stored a bunch of invaluable photos and downloaded about $200 worth of Amazon MP3s since receiving the Toshiba NB205.
    4.  Tech support assured me they would back up the hard drive for me and ship either a fixed or new computer with all my data still intact.  They asked me to register it w their warranty department and call them back so they could send me a shipping box to send it back in.  I did all that and it's been >3 weeks and no box.
    5.  So today I called Tech Support again and the guy goes "Oh yes, you have shipped your computer in for a hard drive failure?".  At which point I had to explain how A) it's not a hard drive failure B) I haven't shipped anything anywhere because I never got the box I was promised.
    6.  Then I proceed to ask him again if my data would be safe, to which he informs me it's Toshiba policy/practice not to back up data for customers.  I found this to be unacceptable and then I didn't know who to trust so I asked for a supervisor.
    7.  This supervisor wasn't able to help me either as he further informed me that they will not back anything up for me AND that I had to pay for shipping AND pay an authorized Toshiba Repair Center to back my hard drive up.
    8.  I suggested what everyone who I've talked to has said:  Toshiba could send me a new computer since they've diagnosed the old one as being dead.  I could swap out the hard drives, or they could send me one without a hard drive.  And I could send them back the dead NB205.
    9.  NO was the answer.  Toshiba wouldn't do anything for me, because software issues are NOT under warranty.  And backing up my hard drive is considered to be a software issue.  I repeatedly told him that it's their defective hardware that is causing the need for data backup.  But this went ignored and I was told they don't cover anything in this case.
    I either had to lose my data or pay probably $100 for a Toshiba dealer to back up my data for me.  Oh yeah, and there isn't one of those within 20 miles of me and I live in Silicon Valley!!  Oh yes, and they want me to pay to ship them the dead computer.
    10.  I finally asked him how he would feel if he was the customer, and if he felt this was any way to treat Toshiba customers.  He replied by saying they have a process, and this is the process!
    Well the next time I and any of you are in our "process" of deciding which brand of technology to buy, I'm certainly not going to consider Toshiba anymore.  This is the second chance I'm giving Toshiba after having a very poor laptop AND service experience in 2000.  Well, it took me 9 years to give them another shot, and I'm never going to trust them again.  I told myself "well, it's a high quality Japanese brand, one that commands a premium in price that people are willing to pay so it should be an excellent product.  AND if things do go pooryly, Toshiba will stand behind their name."
    I was SO wrong!!!  Let this be a message to all people out there, as I did read these forums before buying my product, but the NB205 was so new it didn't have many posts.
    Fool me once, shame on you.  Fool me twice, shame on me!  I'm done with you Toshiba, it's really too bad that you will not honor your brand with fair treatment of your customers.
    Ming Wu

    It isn't that difficult to back up the data from the hard drive.  You can easily do it yourself for about $20.  http://www.datarecoverytutorial.com/recover-data-from-failed-laptop-notebook/
    As for Toshiba backing up your data, ALL of the manufacturer's have that same policy.  NONE of them will backup the data for you nor will they guarantee that your system will be returned with the existing data intact.  This is spelled out in the Warranty documents and is fairly common knowledge amongst most computer users. 
    If the data was that important you should have been backing it up to USB flash drives, a usb external hard drive, or some other backup device on a daily basis just for this very reason.  The fact that you failed to do so doesn't make it Toshiba's problem.
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Lack of Availability of Products and Services in C...

    I've started this thread, to address the annoying problem of not having the same models and services avaialble in Canada as in other countires in the world but especially comparing to the U.S. I dont understand how the U.S., a country right next to us is getting almost all the new models of phones and we either get them a year later or not at all. We dont have any technical or customer support in Canada, apparently we have to call the closest one in the U.S. I know our population is smaller and whatnot, but its soo stupid and annoying not being able to purchase a phone, knowing it came from finland, and with warranty etc or if it breaks know where to go to talk to someone about it... It's not fair!! Loyal customers are frustrated and deserve more respect and services.

    Hi,
    For creating a cube u need to have dimensions in sense characteristics in APO....The characteristics can be product type location type , time characteristics , uom etc.,,
    The values of the characteristics are nothng but the master data of the APO that comes from ECC.So even when u create u r MPOS these values should be present in APO data mart.If u r using the same characteristics in infocube then u will not have to transfer again the data from ECC.If u want to see the CVC'S that u generated in apo u can look into T-Code :/sapapo/mc62.
    If u want u r CVCs and keyfigures to be displayed in cube using T_Code : listcube.
    Hope this answer will help u.
    Thanks

  • PRODUCT AND SOFTWARE COMPONEBT VERSION

    Hi Gurus,
    I am using SAP PI 7.0 with SP  .
    Actually i have to create one product with my own name and one SWCV with name E-FILING GB.
    But this SWCV already exist in SLD.
    Now I am uing this SWCV and SAP HR 6.0 in IR by importing it from XI Standard Content.
    In ID, I am using Integration Scenario by importing it from IR. Where I can get one application component SAP ERP 6 and one Templet with two different roles.
    I have assinged one Business system to SAP ERP 6 application component on A2A tab and one party and one service on B2B tab.
    And two Business services to other party.
    I have added SWCV SAPHR 6.0 to SAP ERP 6 Standard pruduct in SLD.
    But any where I not using the product which I created in the SLD.
    What is the impact of this on the ID objects?
    How to add a existing SWCV to the product which I created in SLD?
    Regards
    Sreeni

    Hi,
    >>What is the impact of this on the ID objects?
    >>How to add a existing SWCV to the product which I created in SLD?
    create your own product and own SWCV
    then if you want to use objects from any standard SWCV just
    add dependecies and you will be able to reuse objects from those
    standard
    that's how you should do it
    Regards,
    Michal Krawczyk

  • Adobe After Effects CS3 upgrade doesn't show as product purchased on "My Products and Services" page

    Hi,
    I have purchased both Adobe Photoshop 6.00, a upgrade from it to Photoshop CS2, Adobe After Effects 8, and a upgrade from it to After Effects C3.  The Adobe Photoshop 6.00 shows up with its corresponding serial numberand the Photoshop CS2 upgrade shows up separtely with its serial number.  After Effects shows up as version 8 but has the serial number from the CS3 product and there is only one entry for it. 
    Did I lose my After Effects CS3 upgrade when I used it to get the discount for the Creative Cloud and that is why it is showing up as version 8?
    Thanks, Ron

    Thank you. 
    I should have looked at my old version's box and I would have relized that. So, there is no loss of ownership or anything of that nature in using Adobe After Effects CS3 for the Adobe Cloud discount?  I would be free to even sell it?
    Thanks, Ron

Maybe you are looking for

  • Remove users from all distribution groups in Microsoft 365

    Hello I would like to know if there is a way I can remove a user from all distribution groups in Microsoft 365. I have a rather large list of users that this would need to be applied to though. Any help would be greatly appreciated. John

  • Questions about MacBook Pro 13"

    Hello, Im thinking of buying a Macbook Pro for school. Im doing some kind of Graphic Design education and I use a lot of photoshop and adobe programs. Now I have two questions regarding to this. What are the advantages of using a Macbook Pro for crea

  • Routine help

    Hi All, I need help in abap code for writing routine in Transfer structure........ some records are posted with  value "Y" for field  N_WBSEOM and some are posted without any value " " BLANK into field N_WBSEOM at R/3 Side. Now in BW i have same fiel

  • I keep getting message in cs3 "could not print (filename) due to program error!" why?

    I keep getting message in cs3 "could not print (filename) due to program error!" why?

  • Leopard backup compatible with Snow Leopard?

    Hi I tried to upgrade my macbook from 10.5.8 to SL 10.6.3 but seems to be stucked in the boot process. I did make an backup before installing but I wonder if it is compatible with Snow Leopard? Should wipe the disk and reinstall and can I still find