PRODUCT AND SOFTWARE COMPONEBT VERSION

Hi Gurus,
I am using SAP PI 7.0 with SP .
Actually i have to create one product with my own name and one SWCV with name E-FILING GB.
But this SWCV already exist in SLD.
Now I am uing this SWCV and SAP HR 6.0 in IR by importing it from XI Standard Content.
In ID, I am using Integration Scenario by importing it from IR. Where I can get one application component SAP ERP 6 and one Templet with two different roles.
I have assinged one Business system to SAP ERP 6 application component on A2A tab and one party and one service on B2B tab.
And two Business services to other party.
I have added SWCV SAPHR 6.0 to SAP ERP 6 Standard pruduct in SLD.
But any where I not using the product which I created in the SLD.
What is the impact of this on the ID objects?
How to add a existing SWCV to the product which I created in SLD?
Regards
Sreeni

Hi,
>>What is the impact of this on the ID objects?
>>How to add a existing SWCV to the product which I created in SLD?
create your own product and own SWCV
then if you want to use objects from any standard SWCV just
add dependecies and you will be able to reuse objects from those
standard
that's how you should do it
Regards,
Michal Krawczyk

Similar Messages

Transport products and software component version

Hi,
I created a Products and its Software Component Version in System Landscape Directory of XI development.
I imported this Software Component Version into Integration Builder and developed design and configuration objects.
The scenario is completed and now I want to transport the Products and Software Component Version to XI Production.
Could someone please explain the transport procedure.

Hi Shravan,
Thanks four your instructions. I would like to have more details on the export/import procedure. Please confirm the following steps are correct:
From SLD of XI development:
1/ Edit new product and its software component version.
2/ Click on icon Export: XI generates a zip file and downloads it in c drive.
From SLD of XI Production:
1/ Select Import utility under system catalog.
2/ Browse and select the zip file
In XI production there are existing third party products, and I do not want the transport of this new product causes any problem.
Design and configuration objects will be exported/import ed after the successful transport of product and software component version transport.
Regards,
Daniel

Products and software components not found in SLD?

Hello All,
I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
I am trying a create a third party system for POS in SLD and i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
But i amot able to find the products and software components in the SLD.
SAP (GM) POS system:
Product (one of the following)
SAP TRANSACTIONWARE GM 9.5
SAP POS 1.0
SAP POS 2.0
Software Component Version (all of the following)
XI CONTENT STORE CONNECT 2.0
XI CONTENT GM STORECONNECT 1.0.
what may be the reason?
Thanks and best regards,
Anil

Hello All,
I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
I am trying a create a third party system for POS in SLD and i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
But i am not able to find the products and software components in the SLD.
SAP (GM) POS system:
Product (one of the following)
SAP TRANSACTIONWARE GM 9.5
SAP POS 1.0
SAP POS 2.0
Software Component Version (all of the following)
XI CONTENT STORE CONNECT 2.0
XI CONTENT GM STORECONNECT 1.0.
what may be the reason?
Thanks and best regards,
Anil

Product and Software component in SLD

Hi,
What is the basic concept of product and Software component.I have few questions.
If our company is going for Sap implementation of ISmedia
and XI as middleware for interfacing with other systems then what do we need to do for product and SWC.
Do we need to create a third party product and SWC for this project in sld?
We can create differnt Software component under the existing Product of SAP ISM
What are the best practices
Thanks,
Naveen.

Hi,
about Software Product and component go thru this part of SAP help-
http://help.sap.com/saphelp_nw2004s/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/frameset.htm
Do we need to create a third party product and SWC for this project in sld?
>>yea, you can create a thridparty product.
We can create differnt Software component under the existing Product of SAP ISM
>>>You can create software components for the product.
I think, the documentation will help you understand this.
Regards,
Moorthy

Naming conventions/hierarchies for products and software components

Hi,
Can someone please advise what they have found works well for naming products and software components and recommended hierarchies?
Following the SAP model it seems to make sense to have a custom product for each SAP product when we are developing custom interfaces for the related system, e.g. ZPRODMYCOMPDEVS_R3, ZMYCOMPDEVS_CRM etc.
Beneath this level as similar convention could be used for the software component, e.g. ZSWCMYCOMPDEVS_CRM or if it is a modular SAP system like R/3 perhaps a grouping per key application area? (e.g. HR, Finance, Logistics etc)
I know it's not compulsory to start these with 'Z' but it would help group custom developments.
Any advice greatly appreciated.
Alan

Hi,
Please refer to this blog...
/people/michal.krawczyk2/blog/2005/04/09/xi--saps-document-templates
that is mentioned in the thread
Name space
Regards,
Bhanu

Transporting Products and Software components

Hi ALL,
I have two new products for which I have created the export file to be imported into the target system. The target system already contains few other products and Software components. Is it true that the new export file from source system will over write all entries in the target system?? or will it be an append ??
The " How to handle SLD for XI" doc tells that it will overwrite..I am a little concerned as there has been no SLD transports done in these boxes and all products currently in the target box have been manually created.
-Ken

/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation

SLD and Software Component versions Import

When I try importing Software Component versions from SLD, I was not able to see what I created in SLD. All of the created Software components ( there are some software components created earlier and are in Production as well ) are not visible during import into Integration Repository.
Thanks

Hi,
All these checks are done and we will not able to connect to SLD if there is a problem right?.
>>>These checks will help you to make in sync with SLD and the repository..
If you are not able to see the SWCs in the SLD itself, then check with other user ids ...During SLDCHeck is it pointing to correct SLD ?
Check out this SAP note- 764176 It may help u
Regards,
Moorthy

XI products and software components in SLD

We are starting to implement XI in order to exchange messages between R/3 systems.
Is it better to create a custom software component within the standard SAP R/3 Product (in the SLD), or do you suggest to create also a custom product (even if the systems involved are SAP systems) ?
Which are advantages and disadvantages ?
Thanks in advance.

I am not sure if the question is answered. I am trying to see what is correct. SAP appear to say build under the specific Product supplied. Or else, what is that used for ?
I am not a seasoned XI developer by far, however, upon reading XI books and documentation, i see that S/W components are attached to Products, and the Products are Imported into the Intergration Builder. I have also seen, and been told, that it is common practice to create a Product that reflects the Project, and then attach the S/W components under that, for which XI would be interfacing. For example, if I were working on a new project, say, "myProj" I would create a product called "myProd", then attach the S/W components involved, say, CRM under that. When the Product gets imported into the Intergration Builder, I continue my developments under a new namespace, that is under the Product "myProj".
Is this right?
In reality, "myProj" is not a Product, it is a project.
I hope this is clear
thanks
Glen

BO XI & CR product and service patch version number

hi,
anyone know
(1) how to find out the product & service patch version number matrix for BO XI and CR ?
e.g. I found from my BO XI that the version is 11.0.0.748, but don't know any service patch has applied.
can find a list like:
BO XI => 11.0.xxxx
BO XI R2 => 11.xxxx
BO XI R2 SP1 => 11.xxxx
CR XI => xxxx
etc.
(2) can a CR report created by CR version 11 be run in BO XI R2 ? what is the compatibility of BO XI and CR ?

Hi Eddie,
Adding more: how to get which all versions of BusinessObjects and Crystal Reports is installed on server or on client?
1. To get to know about the Service Packs for CR and BO:
- Go to Start > Control Panel > Add or Remove Programs > here you will get the list of Crystal Reports and Business Objects Product along with the Service packs and Fix Packs too.
However if BO has MHF or CHF then this information you will not get in Add or Remove programs.
2. about which MHF (Monthly Hot Fix) or CHF (Critical Hot Fix):
For BO:
Go to My Computers > Installation Directory: \ Program Files > BusinessObjects Enterprise 11.5 > Patch Folder (inside this folder you will get the details)
For Crystal Reports:
The information on what updates have been installed in Crystal Reports XI Release 1 can be found in C:\Program Files\Business Objects\Crystal Reports 11\Patches\History.txt.
Hope this helps you.
Regards,
Deepti Bajpai

Error in Integration Scenario: No software Component version exists

Hi Experts,
We have external product and software component like Product "Project Management" we have imported the CIM content for it
Now when we create an Application Component for the same in Integration Scenario in ESR (PI7.1)
while trying to do right click --> Edit Action it gives Error
"" No imported software component version exists for product"
Also note that it allows us to Add new Action there
that is we can right click --> Add action
Kindly help with your suggestions to resolve this << Moderator message - Everyone's problem is important >>.
Regards,
Jagadish
Edited by: Rob Burbank on Nov 10, 2010 3:56 PM

Hi Experts,
Tried the steps given in SAP Note: 768148
Still it is not resolved.
I appraiciate if any one suggest some more options to resolve this.
Regards,
Jagadish

This morning I ask about the requirement to download the adobe Cs6 before i buy the product and the salesperson told me that i met the requirement for that particular software, so my surprise now when i open the file it says an error because my computer d

this morning I ask to a sales person about the requirement to download the adobe Creative Cs6 before i buy the product and the salesperson told me that my computer met the requirement for that particular software, so my surprise now when i open the file it says an error because my computer doesn't meet this requirement, my computer is a OS X 10.5.8 and the requirement is OS X v10.6.8 or v10.7 what can i do?

The requirements are online. For the Master Collection the requirements on Macs are:
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7
4GB of RAM (8GB recommended)
15.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash-based storage devices)
Additional disk space required for disk cache, preview files, and other working files; 10GB recommended
1280×900 display with 16-bit color and 512MB of VRAM; 1680×1050 display required and second professionally calibrated viewing display recommended for Speedgrade
OpenGL 2.0-capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
Java™ Runtime Environment 1.6
Eclipse™ 3.7 Cocoa version (for plug-in installation of Flash Builder); the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playbackOptional: Adobe-certified GPU card for GPU-accelerated performance in Premiere Pro; see the latest list of supported cards
Optional: Adobe-certified GPU card for GPU-accelerated ray-traced 3D renderer in After Effects; see the latest list of supported cards
Optional: Tangent CP200 family or Tangent Wave control surface for Speedgrade
Optional: 7200 RPM or faster hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.* Phone activation is not available.
You should have been given the correct information. Adobe offers 30-day money back guarantee.
You can find return information here:
Return, cancel, or exchange an Adobe order

Can I get product key for older versions of Illustrator with Creative Cloud Student and Teacher edition

I have purchased the Creative Cloud Student and Teacher edition and I now need to install illustrator on Windows Vista. All the new versions are not available for Vista. I have managed to find older versions for download but it is asking me for a product key. Is it possible to get the product keys for older version with Creative Cloud Student and Teacher edition?

You cannot purchase older versions of Adobe software thru Adobe. If you have a full subscription you can acquire the CS6 version thru that. I have had CS6 running on a Vista system for years without problems.
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

HT1338 I am using 10.5.8 and for a particular product download I need version 10.6.8. Any advice would be appreciated

I am using 10.5.8 and for a particular product download I need version 10.6.8. Any advice would be appreciated

You need to click here, buy the DVD, install it, and run Software Update.
(74763)

HT201272 Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?

Where do I get the serial number and product key for the version of AutoCAD LT for Mac that I bought from the ITunes store?

The iTunes Store doesn't sell software for the Mac. I presume you mean the Mac App Store. To the best of my knowledge, no software sold in the Mac App Store has serial numbers nor product keys. For what reason do you think you need them?
Regards.

HT1338 I have a macbook and I keep pressing software update and my computer version 10.5.8 and it says there are no updates anything I can do?

I have a macbook and I keep pressing software update and my computer version 10.5.8 and it says there are no updates anything I can do?

10.5.8 is the last release for OS X 10.5.
If you want to upgrade your operating system, you have to buy it, and it's not available via download. The next upgrade for you would be to OS X Snow Leopard 10.6. In the US, call the Apple online store at 800-MY-APPLE and order 10.6 from the legacy products list. They will send you a DVD, which you can install, then use Software Update to get to the last release of 10.6.8.
If you want to upgrade further, and your sytsem will support it, you can call the Apple online store again to buy Lion or you can connect to the App Store to buy and download Mountain Lion. If your system will support Lion or ML, you probably should have 4GB of memory for reasonable performance.

PRODUCT AND SOFTWARE COMPONEBT VERSION

Similar Messages

Maybe you are looking for