Board BIOS shows "actual usage" 3.2 gigs memory, "physical" 4 gigs

Hi,
Just got the P35 Platinum Combo, love the board for my HTPC. Windows shows only 3 gigs of memory as well as stats in BIOS something like "actual usage" - "physical memory" shows 4 gigs. Not sure what the problem is.
Any help appreciated.
thanks

Quote
So, is the memory being used?
No, it cannot be addressed. Read here:
https://forum-en.msi.com/index.php?topic=108883.0

Similar Messages

X61s Bios shows 4 gig memory, System Prefs shows only 3....

I've got an X61s, and I just installed two 2 gig SODIMMs of PC2-5300 667 MHz memory..... The Bios shows 4 gig installed, but when I use the System function in the Control Panel, it only shows 3 Gig.... Any clue what's up?
Thanks in advance....
Matt

Yes. You're using a 32-bit version of XP or Vista, which can only use up to about 3GB max. Install a 64-bit version if you want to use all 4GB.
I don't work for Lenovo. I'm a crazy volunteer!

TS4036 My camera roll will not restore from iCloud after updating my iPhone 4 to iOS 6. It shows I have 1.7 gigs of photos stored on camera roll but none are appearing on my phone. Everything else restored from iCloud.

My camera roll will not restore from iCloud after updating my iPhone 4 to iOS 6. It shows I have 1.7 gigs of photos stored on camera roll but none are appearing on my phone. Everything else restored from iCloud. When I go to iCloud.com my photostream is not there.

A response I put together from another post. Also going into iTunes and choosing to sync phone to iCloud then back "this computer" sometimes works.
First thing.. Stop where you are. Don't try to sync, update, hard reset, iCloud... Just stop.
Check on your phone under 'SETTINGS' 'GENERAL' USAGE'. It should show some value for PHOTOSTREAM. Also, connect to iTunes and you will notice at the bottom of your phones summary page that there is a large amount of 'OTHER' data.
I used third party software called iExplorer (formerly iPhone explorer). In this program you select 'MEDIA FOLDER', then 'DCIM'. In the various apple folders (IE: 101APPLE) you should be able to preview your photos and copy them to your desktop.
From there sync them back to your device through iTunes or whatever method you use.
There is a simpler solution I'm sure, which may involve using iExplorer to delete some .plist files then restart the phone and let it rebuild. I'm going to try it myself AFTER I've finished copying all the photos to my MAC
Hope this helps.

I lost 3 GB storage capacity of my iPad mini2,the system says I have used 10.1 GB, I count it by myself, the actual usages of storage is 6.4 GB, I know the system it self count some space,I hate the iOS 7.1,I didn't encounter this kind of problem in ios6

I lost 3 GB storage capacity of my iPad mini2,the system says I have used 10.1 GB, I count it by myself, the actual usages of storage is 6.4 GB, I know the system it self count some space,I hate the iOS 7.1,I didn't encounter this kind of problem in ios6

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

Comparing the BOM usage with the actual usage for materials.

Hi All
My client want to compare the BOM usage with the actual usage and have a report for this within a period? More specified they want to calculate the BOM usage, based on the requirement quantity from confirmation - but with out the scrap %. mulitplied with the confimed quantity of the header material.
The actual usage should be based on goods issuing from stock, either as goods issue to order (backflushing) or as goods issue to cost center.
I havent been able to indentiy a standard report for doing this - does some of you know a standard report?
- I was thinking of the following method:
Look at tabel RESB and compare it with MSEG, but I have some diferent problems with this.
- In resb there is no qty before scrap.
- The data amount from MSEG, is so huge so it is not possible to make a data search for a whole period (eg. month)
Br. M

There is one std report MCRX which gives a comparison of quanity in order and actual consumption,
if it doesnt meet your need, you may have to create a custom report.
logic can be find the quantites as per BOM for the produced quantities
issued quantities to the order
tables you may need are AUFK AUFM
AFKO, STAS STPO
MSEG, MKPO
JEST ( if you want to filter using order status)

I am attempting to have cells use data from a selective month from the year before so that I can show actual from the prio. years each month.

I am attempting to have cells use data from a selective month from the year before so that I can show actual from the prio. year each month. I need to create a spreedsheet using the the Acutlas from the year-to-date and from last year-to-date, but need to report each month.

Hi Tony,
Answering your question would be easier given a screen shot of the source table and one of what you want the summary table to look like.
Is the data you want for each month in a single cell o the source table, or does the summary table need to collect February's data (for example) from several cells and do some math with those numbers before presenting them on the summary table?
Regards,
Barry

When I try to sync my ipod it shows that i have 2 gigs of other stuff. I dont know what it is and it is taking up space. how do I get it off?

When I try to sync my ipod it shows that I have 2 gig of "other" stuff and I don't know what it is and it is taking up space. How do I get it off?

You need to restore you iPod to gedure the "other" to its normal of less than 0.5 GB. A restore from backup works if the large other is not in the backup. Make sure that you turn off outo syncing (iTunes>Preferences>Device and check the box that says Prevent iPOds....syncing. Otherwise, the backup will contain the other.

Report to show FBRA usage

Dear Forum Users,
Does anybody know of a report or T-code or SE16 table that shows the usage of the FBRA t-code which is considered by our auditors to be a high risk activity?
I've discovered from searching that there is a relationship between FBRA and the SE16 table BKORM but I'm not sure exactly what that relationship is. I'm not hugely knowledgeable about FBRA though I believe it can be used to stop payments.
The fields the auditors are hoping to see are Payment Ref, Vendor Number, Payment Value, Reason for FBRA usage, Date, Company Code.
I'm a bit out of my usual habitat here. I'm more comfortable in BI so any help or pointers would be really appreciated.
Thanks,
Positive Parrot

Hi,
I want to clarify that t-code FBRA can be used to cancel the payments posted (not to stop payments). Assuming that we are now talking about canceling a payment document using FBRA, you can use SE16 to report most of the data required by your auditors.
Payment document will have a document type (BKPF-BLART) say, ZP so you can use this value in table BKPF and t-code (BKPF-TCODE) FB08 and the posting date range (say, Jan 1 2009 to Jan 31 2009).
Use of FBRA requires entering a reason code so you can either use standard SAP reason codes or create your own. This is identified in BKPF as the reversal reason.
Now using SE16, table BKPF and using the above selection screen values you can get the report. Payment value, payment ref and vendor name are not available but using this report you can use table REGUH or BSEG to get those details.
The best way is to create an ABAP query or a BW cube combining the above tables.
Sharabh

A Standard RRB report that shows actual project cost line items .... ?

A Standard RRB report that shows actual project cost line items but that also shows amount/qty by rejected, billed, to be billed, postponed?
I'm looking for something that will allow project managers to reconciile with the RRB totals and be able to dril in a see a level detail not available in RRB to decide what should be billed, what should should be deferred (postponed) and what should be rejected out of hand.
Thanks.

Thanks Virendra Pal but the VAx5 reports are not really the answer - maybe a custom report will be required right enough.

Not showing Texhnical Usage in MOPZ

Dear Guru's,
I am going to install NW 2004s EHp1 in my existing PI 7.0 system.
It is not showing Texhnical Usage while i created maintance transaction in MOPZ.
Whereas it is showing for my ERP systems(ECC 6.0).
Please let me know,why it is not showing "Technical Usage" in Soultion Manager 7.0 EHp1.
Please suggest how i can procesed.
Thanks & Regrads,
Venkat

Hello there,
The upgrade to Netweaver 7 EHP1 is not supported by Maintenance Optimizer.
Please check http://service.sap.com/solman-mopz for a list of the supported upgrade paths.
Best regards,
Miguel Ariñ

Show license usage output

Hi Experts,
Do you know where i can find reason as to why one of the MDS switches showing:
FS1.DRC# show license usage ENTERPRISE_PKG
Application
ROnly Zoning
But Nothing shows up for these two other switches.
FS1# sh license usage ENTERPRISE_PKG
FS2# sh license usage ENTERPRISE_PKG
I have attached the "sh tech" output of this MDS switches
Thanks in advance

Hi,
FS1.DRC have a zone with read-only attribute (EN12PR03_HBA0_SAN1DRC_SPA0) in vsan31, this vsan is not configured on the other switches.
Rgds Filiph

I hAVE A 2011 macbook pro, i've noticed that hardrive usage from 180 gig went up slowly to 260 gig after several months, and i didn't even install any software or saved anything at all that big? Why is that? Is it becasue of the many software updates that

I hAVE A 2011 macbook pro, i've noticed that hardrive usage from 180 gig went up slowly to 260 gig after several months, and i didn't even install any software or saved anything at all that big? Why is that? Is it becasue of the many software updates that Apple sends? I already checked my files but i don't find anything that would cause that much of a big jump.

Hey hippie, this should help you figure out where your disk space is going http://pondini.org/OSX/DiskSpace.html

How do you reset P6N SLI board Bios?

Does this board have a reset button on it somewhere? When I turn on my pc, it wont even shut down when holding the power button. I have to flick the PSU switch to turn off the system. After I switch off the PSU, the board make a loud noise and it really worrying me.
Can anyone help me on how to reset this board bios?

Hi and welcome to the forum. The manual guides you through the bios setup and one of the items covered is what the power button does and it must be set in bios. This mb has a reset button which is identified in the manual.

(Solved) P67A-G43 Won't OC After BIOS 5.4 (BIOS Shows OC, but CPU-Z Does Not)

After upgrading a P67A-G43 with BIOS 5.4 in preparation for a 3770k, the existing 2600k doesn't OC.
Setting the CPU ratio in BIOS shows the correct ratio in top right stats and in the ratio setting and, after disabling graphic splash, the correct multiplier is even shown on the POST. However, CPU-Z in the OS and benchmark results show only the stock 3.4.
In normal mode I tried 35, 37, 40, 44. OCG mode has the same problem. Although it show 42, CPU-Z shows only stock.
I can down-clock fine (and CPU-Z shows the correct down-clock ratio), but going above 3.4 is a non-starter.
[SOLVED]
If you disable Turbo, the core limits are not shown in the CPU settings. You have to enable Turbo, set the core limits, and then disable Turbo.

Quote
Can I just flash to the 4.1 bios using the pendrive method I used to flash to 4.2??
Yes.
> 4.1 <
Note: GD65(B3) takes the same UEFI/BIOS version.

Question on "show resource usage"

Hi,
Hope you are doing great!
the "show resource usage" indicate the resource usage of the security appliance or for each context.
I am wondering the below output:
FWSM# show resource usage
Resource              Current         Peak      Limit        Denied Context
SSH                         1            2          5             0 System
Syslogs [rate]           1573        65155 unlimited             0 System
Conns                   29937       192916 unlimited             0 System
Xlates                   6751       180865 unlimited             0 System
Hosts                    6218        65515 unlimited             0 System
Conns [rate]              665        32500 unlimited             0 System
Fixups [rate]             467         4617 unlimited             0 System
FWSM#
does it mean the FWSM is generating 1573 syslogs/second currently? and it used to generate 65155 syslog/second?
I don't believe the FWSM can generate 65155 syslogs per second....
does it mean anything else?
Thanks!

Hello,
The command can be use on single and multiple mode:
Example:
show resource usage context admin
Check this links for more information about this command:
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/s4.html#wp1527546
Not sure if the syslogs are per second or what is interval, but yes, those are the amount of logs being generated.
Regards,
Felipe.

Board BIOS shows "actual usage" 3.2 gigs memory, "physical" 4 gigs

Similar Messages

Maybe you are looking for