BODS 4.2 Cannot import the metadata table, RFC_ABAP_INSTALL_AND_RUN syntax error

Hi all, we installed BODS 4.2 server to substitute a 4.1, but we are facing the error:
Error: Cannot import the metadata table <name=T001>
RFC CallReceive error <Function /BODS/RFC_ABAP_INSTALL_AND_RUN: RFC_ABAP_RUNTIME_FAILURE -(Exception Key: Syntax error in program /BODS/SAPLBODS....
We already tried the solution for when people get the error related to unicode.
Also, we are able to pull data via extractors, it only fails when loading Tables....
Any help is greatly appreciated.

Dear,
You will have to import the new ABAP Function Group "BODS/BODS".
Here are some details:
Installing Functions on the SAP Server
SAP BusinessObjects Data Services provides functions that support the use of the ABAP, BAPI, and
IDoc interfaces on SAP servers. You will need some or all of these functions in the normal operation
of the software in an SAP environment. These functions perform such operations as dynamically loading
and executing ABAP programs from Data Services, efficiently running preloaded ABAP programs,
allowing for seamless metadata browsing and importing from SAP servers, and reporting the status of
running jobs. Some of these functions read data from SAP NetWeaver BW sources.
You must upload the provided functions to your SAP server in a production environment. It is
recommended that you always upload the functions to your SAP server whether you are in a
development, test, or production environment. The functions provide seamless integration between
Data Services and SAP servers.
The default installation places two function module files for SAP servers in the ...\Data
Services\Admin\R3_Functions\transport directory. You then upload these files to SAP servers
using the SAP Correction and Transport System (CTS) or manually. Using CTS allows for version
control as the functions evolve across releases.
The installation provides two versions of transport files (depending on the server version you are using)
to install the functions on the SAP server. To obtain the names of the latest transport files for installing
or upgrading these SAP server functions, see the readme.txt file
And I've found those files and text files in the local install folder....in:
Program Files\SAP BusinessObjects\Data Services\admin\R3_Functions
(that's where I've installed it).
There you'll find some descriptive txt as how to proceed.
After installing, it might happen that the executing user is missing some authorizations.
Here my authorizations team helped me by tracing the user and then adding the necessary rights.
Sure hope this will help you.

Similar Messages

Importing the METADATA ONLY using DBMS_DATAPUMP

Hi DBAs,
Using the DBMS_DATAPUMP , how can I import the metadata only for a particular table . Also I dont want to import any associated INDEXES and TRIGGERS. I have the following codes but it is trying to import every thing. Also if the table exist, it is not importing the METADATA rather erroring out.
handle1 := DBMS_DATAPUMP.OPEN('IMPORT','SCHEMA', 'QAXDB.WORLD');
DBMS_DATAPUMP.METADATA_FILTER(handle1, 'SCHEMA_EXPR', 'IN (''HR'')');
DBMS_DATAPUMP.SET_PARAMETER(handle1, 'INCLUDE_METADATA', 1);
Thanks
-Samar-

See the below link,
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_datpmp.htm
Hope this helps,
Regards,
http://www.oracleracexpert.com
Click here for [Cross platform Transportable tablespace using Datapump|http://www.oracleracexpert.com/2009/08/transportable-tablespace-export-import.html]
Click here to learn [Oracle data pump export/import with examples.|http://www.oracleracexpert.com/2009/08/oracle-data-pump-exportimport.html]

OMB plus Creating Locations Modules And Importing the Metadata?

Hi All,
First of all I would like to thank you all of you in advance for all your time and concern. I have serious of questions and I will ask them in 3 different portions as they are slightly different.
How can I implement the steps below using OMB plus? If you could provided sample script and notation it will be highly appreciated.
-- Creating an Oracle Location for a Schema and Registering it
-- Creating an Module and relating it to the location that was created.
-- Importing the metadata for all the objects in this Schema in to this module.
For example,
You have a schema called ORACLE_SRC. I need to create the location and module for this schema and tie them each other. Then I need to import all the metadata for all the objects in this ORACLE_SRC schema. During this import all the preserve statements should be unchecked. And I need to accomplish all these using OMB plus and TCL scripting.
-- Creating an Non Oracle (SQL server 2005) Location for a database and Registering it
-- Creating an Module and relating it to the location that was created.
-- Importing the metadata for all the objects in this Schema in to this module.
For example,
You have a schema called SQLSERVER_SRC. I need to create the location and module for this schema and tie them each other. Then I need to import all the metadata for all the objects in this SQLSERVER_SRC schema. During this import all the preserve statements should be unchecked. And I need to accomplish all these using OMB plus and TCL scripting.
-- Creating an Flat File Location for a folder structure and Registering it
-- Creating an Module and relating it to the location that was created.
For example,
You have a schema called FLATFILE_SRC. I need to create the location and module for this schema and tie them each other.
Thanks again for all your help and concern!
Kind Regards,
Mike

In addition to the performance issue above I have faced an extremely more important problem. When I have used the same logic for importing Materialized views I am getting an error at the last step of the script. It is exactly the same case also for EXTERNAL_TABLE objects. TABLE and VIEW objects are fine. OMBIMPORT command throw the error message below.
PUB04201: Encountered an internal fatal error during processing of oracle module XXX_DMY_DWPROD_TST: unsupported obj type.
I would like to mention that MATERIALIZED_VIEW is the object name I took from OWB scripting Reference guide. I have tried couple other naming conventions too but it didn't work.
Strange thing is If I were to change MATERIALIZED_VIEW to TABLE it works but the materialized view gets imported into 'Tables' folder under the module.
Please help?
     #IMPORT FOR MATERIALIZED VIEWS STARTS
#pull the names of the object inthe schema
     set MVIEWLIST {}
     set sqlStr "select distinct Mview_Name from all_mviews where owner = upper('$DbNm') order by Mview_Name"
     #execute the query
     set oraRs [oracleQuery $oraConn $sqlStr]
     #Loop through the list of objects
     while {[$oraRs next]} {
          set mvwName [$oraRs getString Mview_Name]
          lappend MVIEWLIST $mvwName
     #and close the query
     $oraRs close
     set listCntr 0
     set listTotal [llength $MVIEWLIST]
     set mviewName [lindex $MVIEWLIST $listCntr]
     #First object
     OMBALTER IMPORT_ACTION_PLAN 'IMPORT_ALL' ADD ACTION 'MAT_VIEWS' SET REF SOURCE MATERIALIZED_VIEW '$mviewName' SET REF TARGET ORACLE_MODULE '$ModNm'
     OMBCOMMIT
     puts "$mviewName is being imported"
     incr listCntr
     while {$listCntr<$listTotal} {
          #Rest of the objects
          set mviewName [lindex $MVIEWLIST $listCntr]
          incr listCntr
          OMBALTER IMPORT_ACTION_PLAN 'IMPORT_ALL' MODIFY ACTION 'MAT_VIEWS' SET REF SOURCE MATERIALIZED_VIEW '$mviewName' SET REF TARGET ORACLE_MODULE '$ModNm'
          OMBCOMMIT
          puts "$mviewName is being imported"
     set listCntr 0
     set listTotal 0
     #IMPORT FOR MATERIALIZED VIEWS ENDS
          OMBIMPORT FROM METADATA_LOCATION FOR IMPORT_ACTION_PLAN 'IMPORT_ALL'
          OMBDROP IMPORT_ACTION_PLAN 'IMPORT_ALL'

How to import the internal table into subroutine as parameter

how to import the internal table into subroutine as parameter, and its structure can be recognized inside the subroutine

Hi Yong,
try this:
parameters: p_tabnm like dd03l-tabname.
field-symbols: <fs_tabname> type standard table.
data: itab_ref type ref to data.
create data itab_ref type standard table of (p_tabnm)
                     with default key.
assign itab_ref->* to <fs_tabname>.
select * from (p_tabnm) into table <fs_tabname>.
perform subroutine tables <fs_tabname>
                   using p_tabnm.
*&      Form subroutine
      text
     -->P_<FS_TABNAME> text
     -->P_P_TABNM text
form subroutine tables   p_tabname type standard table
                 using    p_tabnm.
Here p_tabname already has the structure of the table you gave as input
parameter
endform.                    " subroutine

"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'name'. Make sure it exists and that its name is spelled correctly.

When I run the code below I get the following error:"RUN-TIME ERROR '3078': The Microsoft Access database engine cannot find the input table or query 'False'. Make sure it exists and that its name is spelled correctly. Note that I do not call
anything by the name of "false" anywhere in this code.
The subject code (the underscored line of code is highlighted in the debugger when the error occurs):
Option Compare Database
Private Sub JobAssign_Click()
MatLotListAvail_openform
End Sub
Function MatLotListAvail_openform()
Dim dbsAPIShopManager2010 As DAO.Database
Dim rstMaterialLotJobJoint As DAO.Recordset
Dim strSQL As String
Set dbsAPIShopManager2010 = CurrentDb
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID" = "tempvars!JobID" And "MatLotID" = "tempvars!MatLotID"
Set rstMaterialLotJobJoint = dbsAPIShopManager2010.OpenRecordset(strSQL, dbOpenDynaset)
If rstMaterialLotJobJoint.EOF Then
DoCmd.OpenForm "JobAssignMatConf", acNormal, "", "", acEdit, acNormal
Forms!JobAssignMatConf!PartapiIDVH = TempVars!PartapiID
Forms!JobAssignMatConf!JobapiIDVH = TempVars!JobapiID
Forms!JobAssignMatConf!JobIDVH = TempVars!JobID
Forms!JobAssignMatConf!MaterialLotIDVH = TempVars!MatLotID
Forms!JobAssignMatConf!Desc = TempVars!MatDesc
Forms!JobAssignMatConf!recdate = TempVars!recdate
DoCmd.Close acForm, "MaterialLotListAvailable"
Else: MsgBox "This material lot has already been assigned to this job."
DoCmd.Close acForm, "MaterialLotListAvailable"
End If
End Function

I think the SQL statement should be
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID=" & _
tempvars!JobID & " AND MatLotID=" & tempvars!MatLotID
This assumes thatJobID and MatLotID are number fields.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Database trigger cannot read the updating table

I want to create a database trigger :
after insert or update on EMP
for each row
begin
select sum(EMP.salary) from EMP WHERE .....
end;
However, I got an error is that I cannot read the updating table if the trigger is 'for each row'. Can anyone help me to to this?
More, I must use 'for each row' trigger for this case.
null

I think the SQL statement should be
strSQL = "SELECT * FROM MaterialLotJobJoint WHERE JobID=" & _
tempvars!JobID & " AND MatLotID=" & tempvars!MatLotID
This assumes thatJobID and MatLotID are number fields.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Cannot import the selected file. What can I do?

I am trying to import a 2010 pptx or a ppt ile into Captivate.5.
The error message reads "cannot import the selected file. Refer to the documentation to ensure that you have installed the correct version of Microsoft Office." I am running 2010. What should I do to fix this?

Could you once try to save the PPTX as a PPT-file and see if it will be imported then?
Lilybiri

Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059

I just updated Window 8.0 to 8.1 for the second time as the first Time there was an UEFI issue... the 8.1 installs and update seemed smooth... I shut down, and I leave for work. I come home fire up my PC it seems slow!! it boots...
I notice some live tiles are active I prefer mine off so I shut off a couple Live tiles. so then I decide to open the Mail tile and it locks up... and then one of my browsers freezes up!!! I could not open task manager at all to end the
proses, so I decided to restart and then an app was not allowing windows to restart!!! so windows ended the task on its own could not make out what program or app it was!!! and the machine booted up slower again. I went into the event viewer
and what do I find in there is this stuff and now looking at it this all started after the windows 8.1 update... I get it we all want the latest and greatest OS but as my mom said good things come to those whom wait don't rush into anything!!!
and I think Microsoft you are rushing to push stuff out onto the Market... so now I have to sit here and wonder why my PC now takes 2 + minutes to load!!! (BS) and on win 8.0 it took 60 seconds... fix this please I will watch and see if
this happens again if it keeps up I will have to once again revert back to 8.0 and at that point I will want some $$$ compensation for my loss... why should I have to go through hoops for something with the word Mircrosoft attached to it...
I wonder how many others have had this same issue and don't even know its happening....
1.
Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059
2.
taskhostex (2888) WebCacheLocal: The shadow header page of file C:\Users\Dale\AppData\Local\Microsoft\Windows\WebCache\V01.chk was damaged.The primary header page (4096 bytes) was used instead.
3.
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{362b48de-4382-11e3-be6e-3085a9a945d8}#0000000000007E00.
4.
Driver detected an internal error in its data structures for
5.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: e14
Start Time: 01cf3eb70280ca6e
Termination Time: 4294967295
Application Path: C:\WINDOWS\syswow64\wwahost.exe
Report Id: f7b4be2f-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: Microsoft.SkypeApp_2.0.0.5011_x86__kzf8qxf38zg5c
Faulting package-relative application ID: App
6.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 15bc
Start Time: 01cf3eb66f89a193
Termination Time: 15
Application Path: C:\WINDOWS\system32\wwahost.exe
Report Id: 0fd54265-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: microsoft.windowscommunicationsapps_17.4.9600.16384_x64__8wekyb3d8bbwe
Faulting package-relative application ID: Microsoft.WindowsLive.Mail

I have the something similar happening as reported in event viewer in the warning section:
System
- Provider
   [ Name] Microsoft-Windows-Security-SPP
   [ Guid] {E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}
   [ EventSourceName] Software Protection Platform Service
- EventID 1058
   [ Qualifiers] 32768
   Version 0
   Level 3
   Task 0
   Opcode 0
   Keywords 0x80000000000000
- TimeCreated
   [ SystemTime] 2014-08-13T04:35:49.000000000Z
   EventRecordID 80761
   Correlation
- Execution
   [ ProcessID] 0
   [ ThreadID] 0
   Channel Application
   Computer Monzworks
   Security
- EventData
   0xC004F059
installation of the proof of purchase from the acpi table failed 0xc004f059
My System Properties page says "Windows is activated" and a product Id is displayed. I am on a window 8.1 core OS after applying the update successfulling from Window 8. My computer is an AsusTek Computer Inc. ,
Asus Desktop PC CM1745 Series - 64-bit Operating System x64-based processor.
I had trouble with AODDriver4.2.0 causing errors because the system could not find the path, It turned out to be uncleared program remnants in the registry were looking for an old version of the driver, in the wrong place , instead of the current one.
Oh, and I tried sfc/scannow and DISM /Online /Cleanup-Image /RestoreHealth from elevated cmd prompt and elevated powershell ise everthing was reported with no errors and with powershell, the report said windows store corruption was repaired.
Before this I had used apps.diagcab and it said my IE 11's temporary internet files folder was in the wrong place that it was going to put it back. Well, it messed up my IE 11 so the folder location was in the same place but it was not listed in the
location:                 . <----- Just like this. Plus the amount of disk space available was 8mb-which messed up any sort of operations for example putting in a new search
engine could not be completed. I had to use a system restore.   I currently have no errors showing up but warnings yes. thankfully most are minor.This is the other event viewer report which could be related:
- System
- Provider
   [ Name] Microsoft-Windows-Security-Auditing
   [ Guid] {54849625-5478-4994-A5BA-3E3B0328C30D}
   EventID 5061
   Version 0
   Level 0
   Task 12290
   Opcode 0
   Keywords 0x8010000000000000
- TimeCreated
   [ SystemTime] 2014-08-13T03:48:26.671362500Z
   EventRecordID 290021
   Correlation
- Execution
   [ ProcessID] 676
   [ ThreadID] 728
   Channel Security
   Computer Monzworks
   Security
- EventData
SubjectUserSid S-1-5-21-4255092528-2166032690-2543152005-1002
SubjectUserName Monz Prez
SubjectDomainName MONZWORKS
SubjectLogonId 0x239d9
ProviderName Microsoft Software Key Storage Provider
AlgorithmName UNKNOWN
KeyName CD1CC265-0DA0-4230-8419-CB6F808FE688
KeyType %%2500
Operation %%2480
ReturnCode 0x80090016
I am tired so talk among yourselves.
Sincerely Tired

The Web Dynpro component cannot be generated due to serious (syntax) errors

Hi everybody,
While I was developing a web dynpro application, I had an error but I couldn't understand this error. Before I took this error message, only I changed bound one context node to another context node in a RadioButtonGroupByKey.Therefore, when I pushed activate button, I took an error message.This error message said "The Web Dynpro component cannot be generated due to serious (syntax) errors". What does it mean ? How can I find out where is the error in the application. Also, I think the reason of this error message is about a BC problem. I am waiting for your comment urgently.

Hi ,
Just delete the context (by using the context binding) and bind the field with the correct node and try to activate .
One more suggestion is that after deleting the binding and before binding to other node check it that whether that binding was properly deleted or not.Some times its not deleting the binding.
Hopely my suggestion may work.
Regards,
Satya

The system cannot find the file specified.Windows sockets error code:2.

Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.

Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

None of the fact tables are compatible error

Hi All,
I do see this error (none of the compatible fact table) after setting the content level aggregation on the dimension tables and the fact table. This error i get only when i try to pull the calculated item which is based on a attribute in the fact table. I have an attribute like year in the fact table i need to display like 'CY'||'2013' in a calculated logical column and when i pull this into answers i get this error -
1) joins are ok ; only one fact table and 3 dimension tables
2). content level on the fact table are specified at the detail level and also for the dimensions
any suggestions - thanks for your time

can anyone please provide some suggestions -
> i looked at the fact table LTS and specified the logical level for each dimension as the detail
> specified the LTS for each dimension table
> I have a column in my fact table which is calendar year and i want to have a derived column like rep_cal_year with 'CY'||cal_year - so when i pull this derived column in my answers i get the error - none of the fact tables are compatibile with the query;
what could be missign?

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values)

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values).
Press Ctrl+Shift+O for next error or Press Ctrl+Shift+I for error details
Please help me, Thank in advance.
Sravan.

Hi Sravan, this means that one or more of the fields are required to be filled in or have validation set up on them so that the information entered matches a certain criteria. Make sure what's entered matches what's required. If the form still can't be
submitted, check the rules set in InfoPath and the list/library to see what's causing the error(s).
cameron rautmann

I cannot empty the trash. I get Error -8003.

I cannot empty the trash. I get Error -8003. How can I empty the trash or securely empty the trash?

http://download.cnet.com/Trash-It/3000-2094_4-25829.html
Works for me, especially with the annoying PDFs that won't trash.

The formula contains a syntax error

Hi i keep getting the following message errors The formula contains a syntax error. I have working with lookup formula so when i change hours is changes the price. Just need to get a total for hours x number of people x price cant seem to get there.
Thanks Danny

It's hard to say from your screenshot, but it appears you are either attempting to make a cell reference itself, or the reference is empty.
There is no need for the parentheses since algebraic hierarchy will result in the same answer.
Capture the row and column data, post a more descriptive screenshot, or describe the required calculation in greater detail.

BODS 4.2 Cannot import the metadata table, RFC_ABAP_INSTALL_AND_RUN syntax error

Similar Messages

Maybe you are looking for