BOE XI 3.1 and CR 2008 installation - which zip files?

I downloaded a set of .zip files for BOE XI 3.1 and 2 .zip files for CR 2008 and looking for information which files to unzip and install. Any instructions would be appreciated. I have installed BOE XI R2 and CR 11, but this set of files looks different. Thanks!

Hi Dan
When you unzip these files you will find a ReadMe document.Suggest you to read through to have an understanding of what you are about to install.
Please unzip the files for CR 2008 and run the setup.exe file from the folder if you want to install CR 2008 client tool.
By unzipping the BOE XI 3.1 file you will we able to see the setup.exe for installing the Enterprise software
You can keep the CR 2008 client on a separate machine and BOE XI 3.1 on the server machine.
Thanks

Similar Messages

Can't extract Hotfixes and CU2 becuase of multidisk zip file?

Hi experts,
Does anyone download hoxfixes and MSSQL 2008 CU2 from microsfot but can't extract?
I download CU2 hotfixes from microsoft but when I try to extract, there always shows self-extracting multidisk zip file. How do I solve this problem? I call microsoft but the supports say they can just extract without any problem? Why? I try on many PC/Servers.

My company's proxy has some issue, I change it to another and everything is fine.

Lines over images and around text in Captivate SWF file

My project works & views fine in captivate and when published, it views fine on my mac - through flash player and browsers. But when I send a swf file to the client to view they see odd lines above and below images.
But they dont see the lines when they view the htm file within a browser - then it views fine.
The lines only appear when there's text over an image.
Screen shots attached.
My captivate project was created by importing a Powerpoint document, with images and text on each slide.
I've changed the optimisation / slide quality through prefrences and on each slide to the highest quality.
I've also un-selected the advanced slide compression.
Is there another thing I can try to iron out these lines?
Some of the images within Powerpoint are stretched, would this cause the lines?
Is it a flash player issue?
Or a zooming issue?
Any help is much appreciated!

Thanks Lilybiri,
I am a new user & just finding my way
I understand how to publish and how Captivate creates a zipped file with a SWF, HTML, JS and CSS files etc. (Im using Captivate 7).
How do you send Captivate projects to clients for review / approval before you supply them with the whole project zipped file?
So far I've been sending them the swf file to check. And have had troubles with them viewing the lines over images and around text. Even though I cant see the lines.
I need the client to see what I'm seeing - a project without any lines.

Converting html file into zip file and send email attaching zip file

Hi Experts,
I am trying to send email with attachment(html). Which contains more than 7MB. So, It is throwing an error like Size exceeded.
So, Now i need to compress the data for less than 7MB.
I decided to convert HTML File into ZIP File.
Kindly suggest me to convert the HTML file into ZIP file and sending email with attached ZIP file.
Correct answer rewarded,
Thanks & Regards,
N. HARISH KUMAR

Hi Experts,
*// HTML_TAB converting into ZIP File
   DATA : zip_tool TYPE REF TO cl_abap_zip,
           filename TYPE string ,
           filename_zip TYPE string .
   DATA : t_data_tab TYPE TABLE OF x255,
           bin_size TYPE i,
           buffer_x TYPE xstring,
           buffer_zip TYPE xstring.
filename = text-007.                                                                          "'HTML_TAB
*describe the attachment
   DESCRIBE TABLE html_tab LINES tab_lines.
   bin_size = tab_lines * 255.
   CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
     EXPORTING
       input_length = bin_size
     IMPORTING
       buffer       = buffer_x
     TABLES
       binary_tab   = html_tab.
   IF sy-subrc <> 0.
*     message id sy-msgid type sy-msgty number sy-msgno
*     with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
*create zip tool
   CREATE OBJECT zip_tool.
*add binary file
   CALL METHOD zip_tool->add
     EXPORTING
       name    = 'FSSAI_MAIL.HTML'
       content = buffer_x.
*get binary ZIP file
   CALL METHOD zip_tool->save
     RECEIVING
       zip = buffer_zip.
   CLEAR: t_data_tab[],bin_size.
   CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
     EXPORTING
       buffer        = buffer_zip
     IMPORTING
       output_length = bin_size
     TABLES
       binary_tab    = html_tab.
Thanks & Regards,
N. HARISH KUMAR

How to compile and publish after modified a .java file?

Hello,
I am a newbie to Business Object. I am now working on a server that installed BusinessObjects Enterprise, to develop and run BO reports. I need to edit some java codes of the InfowView. I found that there are some .java, .class, .jar files under the installed folder. I know that it is a struts framework and I can find which .java file to edit, but I don't know how to compile and publish the codes. Is it necessary to install any development tool to do it?
Regards,
Philip

Since you are using CSV, you can read a line at a time and then use String.split() on it. One you have it split, you upload to your DB using JDBC or if your in the MS world and cannot get a JDBC driver, then use the JDBC/ODBC bridge.

Opening .RAR and .ZIP files

Does anyone know of any free programs that open .rar, .zip, etc...?

You don't need anything, you should be able to just double click on the file to open a .rar or .zip. If you want to compress a file(s) or folder, simply right click on it and choose Compress and that will create a .zip file.
Regards,
Roger

HOW DO I UNZIP AND ZIP FILES

This Mac uses 10.5.8 and apparently will not open .zip files that come to it nor can my bookkeeper zip excel sheets to email to me.
Anybody? Please?
Bill

Hi Bill,
What happens when you double click on a zip file? It should decompress.
If not... The Unarchiver 2.6 will do...
http://wakaba.c3.cx/s/apps/unarchiver
To zip a file, right click or control+click on a file, choose compress.

CR XIr2 and CR 2008 in BOE XI 3.1

I am looking for a document detailing how to install CR XIr2 and CR 2008 on same client. I need both of these apps to be able to post to BOE XI 3.1 is this possible? How will I be able to tell once a report is published if it is a r2 or a 2008 version.
Thanks
Bryan

Hi Brain,
We can install multiple versions of a crystal on same server.
We can publish the CR XI R2 and CR 2008 reports to BOE XI 3.1 server.
But in the Enterprise there is no such option available to know which version the reports are developed.
As there is no such functionality avaialble till now , we need to manually run the reports in designer applications.
Regards,
Naveen.

Crystal report 2008 installation on top of BO XI R2

Hi,
      I would like to install the Crystal Reports 2008 with SP3 and Xcelsius2008 on top of BO XI R2 Version.
      Is there any disadvantage by doing this activity on XI R2?
      Could you please tell me the installation steps for crystal report 2008 and Xcelsius2008 on top of Business Objects.
Regards,
Sridharan

Nope.
Coz every tool installation has different Setup files.
You can install CR2008, Xcelsius 2008 etc..., on top of BOE. No issues.
Only it matters which datasources you have and it needs Integration kits also.
I-Steps: Follow and give text , Keycodes etc wherever it asks, nothing more.
Thank You!!

Acrobat 9.0 Pro and Office 2008 updates download but won't install

I hope I'm not alone experiencing the following difficulties installing third party patches and updates and that someone who reads this may recognize the problem…and its solution. I've run Adobe Updater (6?) for CS4 Design Standard which includes Acrobat 9.0 Professional, and subsequently, Microsoft Autoupdate for Office 2008 v12.0.1, but find that neither will install the downloaded updates which disappear immediately after an (unsuccessful) installation attempt.
Disk space is not a problem (500GB HD) nor is memory (4GB RAM); I'm using OS 10.6.4 (10F569) which is the most current set of OS updates I can locate. I had successfully been running CS4 with Adobe's most recent patches (e.g. P'Shop 11.0.2 and Acrobat 9.3.3) until the 9.3.4 patch failed to install with the message that +"Safari and Acrobat apps must be closed in order to proceed"+—they were closed as was everything else that wasn't essential according to a check of the Acitivity Window. A grab of the alert panel reads:
+"AcroProUPd934_all Update Failed: The Patch has failed because the application has been modified since it was originally installed (for example, plug-ins may have been disabled). Please go to the Adobe support website for more information regarding how to re-enable disabled components prior to installing the patch, or you can uninstall and reinstall the application, and then reinstall the patch."+
Of course, uninstalling CS4 and reinstalling the entire suite of apps reverts all of them to their original versions, now none of them will accept an update…whether manually downloaded and fed to it or by using Adobe's most recent AutoUpdater. The most consistent message is an alert panel stating that in order to continue, Safari and Acrobat applications must be closed—which they are.
Not surprisingly, after nearly 8 hours on a cell phone with Adobe Tech Support in Delhi, 5 different techs and a manager, the case remains open a week later; it seems +"no one has ever seen or heard of this problem before"+ and an overly apologetic manager could only repeat +"it's [Adobe] policy to remove all copies of CS4 from existence once CS5 is introduced."+ While we waited for 500MB of updates to download more than once, a helpful tech suggested I'd have more luck finding a used copy of CS4 on the net than getting a link to another download from Adobe.
With regard to Microsoft Office 2008, I'd been running v12.0.1 and the MS Autoupdate app has tried to download and install v12.1.0 (and those which follow) but when installation is attempted, an alert panel reads:
+"There is a problem with the Office database. Office might be unable to access the data base or the database file might be damaged. Without the database, you might be unable to use the Address Book, Scrapbook, and other features that store your personal information. To rebuild the database, Open Microsoft Office 2008/Office, and then open the Microsoft Database Utility. For more information, open the Database Utility application, and on the Help menu, click Database Utility Help."+
All attempts to rebuild the database fail, noting…
+ERROR: Failed to open database [Head]+
+ERROR: Corruption opening database [16003:""]+
======================
+Scan Ended+
====================
Two hours on the phone with a relentlessly pleasant Nova Scotian tech for Microsoft revealed little but the suggestion that +"the app doesn't seem to be able to recognize your hard drive. I've never seen this problem before."+
With luck, perhaps someone reading this far recognizes the issue and can offer a solution? It will be gratefully received! Thanks,
David

Disk space is not a problem (500GB HD)
How much space is available out of the 500GB?
Have you tried any of the following:
Disconnect all peripherals from your computer. Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select *Disk Utility.*
Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
Click _*Repair Disk.*_
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and try the installations again.

BO 3.1 after Xcelsius 2008 installation

Hello everyone,
I have a problem with BO 3.1 environment after Xcelsius 2008 installation. When i try to open Webi reports in InfoView (which worked fine before the installation), "Cannot execute this operation: a valid license was not found (Error: INF)" message appears.
I have applied licence codes from partner's temporary license files (Xcelsius 2008 Enterprise license and BO 3.1 Enterprise license).
I tried to unistall Xcelsius to prevent Webi reports from crashing but after that CMS is not able to start. Actually Configuration Manager shows that it works just fine but there is not a possibility to log on to it.
Anyone have some suggestions regarding this issue
PS. my system is Windows 2008 Server.
Best regards
Wojtek Materna

Thanks for the quick response Wojtek!
However, reinstallation of Xcelsius didn't work for me and removing it only made things worse so now I have redone the whole BOXI 3.1 installation and things seems to work so far. It was only a demo server so it wont be to much hassle getting content back.
Rgds
/Fredrik

BOE XI R2 on Windows Server 2008 64 Bit Machine

Hi,
We are trying to install BOE XI R2 on Windows Server 2008 64 Bit Machine.
For some reason when the install finishes we dont get all the Program Icons (Like .Net Admin Launchpad).
Are there any different steps that we have to take to get a successful installation? Will XI 3.1 take care of this?
Thank you
Edited by: Charlie DeSaussure on Jan 22, 2010 8:44 PM
Edited by: Charlie DeSaussure on Jan 22, 2010 9:40 PM

Hi Charlie,
64 bit it supported on XI R2 but Windows Server 2008 is not . Have a look at this Supported Platforms document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50e8f572-48d0-2c10-4ea6-83bf8567e28a?quicklink=index&overridelayout=true
I hope this was helpful.

SQL server 2008 Installation media

HI all,
I am trying to install SQL server 2008 express, and in the "SQL Server Installation Center" i select "New SQL Server stand-alone installation or Add features to an existing installation" After selecting that option a window pops up and prompt me to "Browse for SQL Server 2008 Installation Media"
Now, what exactly is "SQL Server 2008 Installation Media"? how am i suppose to locate/browse the installation media on my computer?
i am totally new to SQL server and i am self-learning it from a book, the problem is that the book does not explain where to browse for instillation media!
my system info:
Windows 7 Home premium
64-bit OS
AMD 2.60 GHz
6.00 GB RAM

This is a solution for Windows 7 users who used the Web Platform Installer (I'm going to call it WPI).
1 - Make sure you have power shell installed.
2 - Install the sql 2008 SP1. google it and download it.
Now comes the detailed part...
You have to get a hold of the installation files without using WPI.   The WPI stores the installer executable on your computer and you have to run it and then get a hold of the directory it extracts before it deletes it.    You need to locate the WPI installation file and then run it manually. Mine was located at...
C:\Users\**username**\AppData\Local\Microsoft\Web Platform Installer\installers\SQLExpressAdv\12A6B9C2237817DEEEB3DCE22AFFA25B6794850C
Of course you substitute your own username.   You may need to reveal hidden folders.   If you can't find it try running a search for the SQLExpressAdv folder.
In that folder you will find a file named "SQLEXPRADV_x64_ENU.exe" or something close to it. Run it and either on the first or second step you will see it extract a bunch of files.   Don't go any further after it runs that extraction.   Go to that folder and copy all the contents it extracted to a new folder and whamo.   That's where you will point your sql browse box to.
Now you can uninstall, set up servers, whatever it is you were trying to do.
-N8

Crystal Reports Version to Work With Vb 6 and VS 2008

Hi,
We have some legacy VB 6 applications which are too large to port over to Visual Studio which use Crystal 7.0
Recently at one site there have been problems with another application which uses a new version of Crystal. Either one or the other will work but not both. This might be solved by ugrading to Crystal XI R2 ( I believe that newer versions can run side by side). However, we also have new projects starting that are to be developed in VS 2008. As I understand it, Crystal XI R2 will not work with VS 2008 and CR 2008 will not work with VB 6.
We really donlt want to have to buy both versions !!
Anyone got any ideas ?
Many Thanks
Paul

CR 7 did not support side-by-side installs. Likely what is happening is the your app and the other app is loading crpe32.dll from the \windows\system32 folder. Which obviously will not support each other. This is the only dll that is common among all versions of CR, see below for more info, and that due to it's location can cause issues like this. Newer versions from 8.5 do version checking and athough the dll's have the same name XI R2 will not load other versions, there are exceptions. The exceptions are UFL and some legacy database drivers that will work in any and all versions.
A few possible work arounds, in your app do version checking when loading crpe32.dll or specifically if crpe32 is residing in a memory space that some other app has loaded it and Windows will share, check the version of the dll and if in your case it's not 11.5.x.x. then pop up a message indicating they must close the other Crystal app before continuing.
Move all the runtime files into the applications startup folder, what's specified in the Icon on the your desktop or short cut. Moving them there may fix this, we start looking for our runtime where your EXE is located and then in the working Folder, then in the \system32 folder and finally down the PATH statement. We also have hard coded specific location in our load methods. In this case you may have to rename the \windows\crystal folder from the CR 7 install. But I don't recall if this will break the CR 7 app.
Also if you are moving the version 7 runtime or the other app it may break that application so make note what you did so you can restore it. Also highly suggested to back up everything and test this on a test machine before applying to the production PC's.
You can use tools like Filemon and modules from our site. You can get filemon from www.sysinternals.com.
Other than that it will not likely work due to 7 not supporting side-by-side and will load anything it finds. And of course, Don't support or install both versions of software on the same PC.

Enterprise Hotfix Rollup for Win7 and Server 2008 R2 via WSUS

I stumbled across the fact that Microsoft released a hotfix rollup for Win7 and Server 2008 R2 that contains 90 hotfixes
http://support.microsoft.com/kb/2775511/en-us
The articled I linked above talks about after installing 2775511 (the big hotfix rollup containing 90 hotfixes) it is also necessary to install three more hotfixes:
After this update is installed, you must install update 2732673 to fix a regression issue in the Rdbss.sys file
After this update is installed, you must install update 2728738 to fix a regression issue in the Profsvc.dll file
After this update is installed, you must install update 2878378 re-released on November 11, 2013 to fix a regression issue in the Advapi32.dll file
I have imported all four of these hotfixes into my WSUS server. Do I need to install 277551 first and then install the other three or can all four be approved and go out at once? I guess I am hung up on the language of "After this update is installed
.... ". I want to put all 4 of these on our Win7 machines as well as my 40+ WinServer 2008 R2 machines

I read somewhere that over half of the updates included in Win7 SP1 and WinServer 2008 R2 SP1 were originally released as hotfixes. This means Microsoft made the decision that a large number of hotfixes would benefit every user of these two OSs
I think your conclusion is flawed. The only thing that you can draw from the presented statistic, is that Microsoft determined that a significant percentage of updates originally released as hotfixes warranted the additional investment in regression testing
to subsequently release those hotfixes as updates.
The fact that they bundled these 90 hotfixes together leads me to the same conclusion.
In fact, exactly the opposite conclusion applies: What you have in this package is all the rest of the stuff that didn't make that cut. What you have in this package are still NOT-regression tested hotfixes, they've just been bundled up for easy deployment
(and note that three of them got further broken in the process of bundling), causing yet three more hotfixes to have to be released.
In fact I read the MS Team Blog about this big hotfix release and they say the same thing, all users of these OSs would benefit from the installation of this hotfix rollup, not just a subset of users.
I suspect there are a notable number of patch administrators and systems administrators who would disagree with that self-serving promotion. If, in fact, it's true that "all users" would benefit, then the product team should have invested the effort in properly
regression testing those hotfixes, and releasing them as REAL updates. They did not; ergo the *actual* value is less than claimed.
Of course the bugaboo here is the fact that three other individual hotfixes need to be installed after the big hotfix rollup is installed.
Exactly! (And those are just the attempted fixes that broke something. Who knows how many other "fixes" may still result in newly discovered "broken stuff" that was never broken in the first place.)
The second part of this question should revolve around an itemized review of the hotfixes contained in this rollup with one simple question asked for each:
Have we actually *experienced* the issue addressed by this hotfix.
Where hotfixes are concerned one very simple but important rule applies:
If it ain't broken, don't try to fix it!
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

BOE XI 3.1 and CR 2008 installation - which zip files?

Similar Messages

Maybe you are looking for