BOM data source ... Li Xu???

Hi Li,
In one of your earlier posts I saw that you have created a custom data source for BOM extraction. I am desperately trying to create a BW data source for BOM with explosion to lowest level. Can you please help me with the logic and the code for the custom extractor..
Delta? Time dependency?
I would really appreciate your help.
My email is [email protected]
Thanks in advance!
Ani.

Hi Ani,
the BOM data source we implemented is based on R/3 tables. The steps:
1. you may need to identify the tables and fields and their relationship and requirement first together with your R/3 biz/IT partners.
2. create a table view by joining the tables and fields identified above.
3. create generic customer data source against the view.
4. replicate DS in BW and assign it to IS ....
we didn't use ABAP coding for this data source.
Hope it helps.

Similar Messages

Not able to Find Some BOM Related Standard Data Sources in PP.

Dear Gurus,
I am not able to find the Standard Data Sources for Loading the Master Data for the Following Standard Info Objects
1. 0BOM
2. 0COMPONENT
3. 0HG_LV_ITEM
I have activated the objects in BW side, but not able to find the data sources to Get the Data from.Kindly help me out regarding this issue.
with regards
vikram..

At least, for BOM i have no found any datasource and any time i had to implemented myself.

Generic data source for muliple level BOM

Hi Bhanu & everyone,
Whats the best way to create a gereic data source for muliple level BOM (STKO, STPO & MAST tables) in BW? I also need to maintain the history.
Thanks,
Aniruh.

Hi Anirudh,
You can create a view of those tables using transaction se11 and then create a datasource using transaction rso2.
Hope this helps.
Regards,
Diego

Generic Data source using FM for BOM Item data is not saving

Hi Experts,
This is the first time I post on this forum.
I am creating a custom datasource (ycp_bom_itm) based on Function Module in R/3 which get data from MAST and STPO.
I have defined the Function Module and the extraction structure as well.
So While saving the Data source i am getting Error as
" Units field MEINS for field ZMENGE of DataSource ycp_bom_itm is hidden
Message no. R8147"
Does any of you have experience of this issue? Please Help to solve this issue
Thank's In advance

Hi,
Go to Rsa6 and select relevant d.s (Custom) there will be 4 options for each field selction, hide fieldi ,nversion,field only .
check MEINS field details either it is checked/unchecked (Enable/disabled) hide field , need to be un checked.
Thanks.

BOM DAta Access in SRM

Hi,
WE are implementing a PLM - SRM integration wherein products once finalised would need to be communicated over to the Vendors for finalising product design. we would be having SAP R/3 as the system which would be the bedrock so as to say. after product design stage where the BOM would be constructed, how can we access the BOM DATA through SRM ? i checked the SRM master data, ALL of which would be sourced through R/3 using CRM Middleware, what i want to knwo is, how will we import BOM data into SRM ?
regards
authi

SRM does not have native capability to store structured items (like bill of materials or bill of services) like in R/3. Even if you somehow replicate the BOM into SRM (using CRM middleware) the procurement documents cannot handle such structure items.
Kind Regards, Suresh.
Message was edited by: Suresh Ramanathan

Which data source will suit

Hi all,
I need to work on conversion of plan order to production order blue print in PP.Could you please suggest me which below data source is suits for particlar rek.
2LIS_04_PEARBPL
2LIS_04_PECOMP
2LIS_04_PEMATNR
2LIS_04_P_ARBPL
2LIS_04_P_COMP
2LIS_04_P_MATNR
Thanks
Raj

Hi Raj
2LIS_04_PEMATNR and 2LIS_04_PECOMP. SAP has provided standard cubes for each of these datasources 0PP_C07 and 0PP_C08.
2LIS_04_PEMATNR datasource is for Repetitive Manufacturing Material View,
and 2LIS_04_PECOMP datasource is for Repetitive Manufacturing Component View
From datasource 2LIS_04_PEMATNR you can take Quantity of goods received for header material and from datasource 2LIS_04_PECOMP can take Requirement Quantity , Quantity withdrawn for BOM component.
Hope this help you, pls provide point
Atul

What are all the Standard Data targets&Data source for Warehouse management

Hi,
What are all the Standard Data targets & Data source for Warehouse management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

What are all the Standard Data targets&Data source for Transportation Manag

Hi,
What are all the Standard Data targets & Data source for Transportation Management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

How to enter BOM data in BOM header

I need a small help from SAP GURUS regarding the subject given above. When i was trying to enter BOM data in DIR enabled object links of BOM header, it was not allowing (Disabled) to enter the same.
How to enter BOM details in BOM header in DIR?
Is their any proceedure to enter the BOM data in DIR object?
Thanks in advance.
Regards
Suresh. J

Hi Suresh,
unfortunatly it is not possible to add a BOM header link from document side.
Generally the linkage of objects to a DIR is designed as such that a
user can create and maintain the link from object-side as well as from
document-side. There are, however, some exceptions like the production
order (PORDER), BOM item (STPO_DOC) and BOM header (STKO_DOC). Links to
these objects can only be created and maintained from object-side.
Regarding BOM objects the reason for this restriction is due to the
engineering change master, which is completely connected to BOM. The
functionality at this level only allows the display of BOM objects from
the DMS application.
The check for these objects is done in the following coding:
Main Program     SAPLCV130
Source code of   LCV130O01
MODULE (PBO)     L201_BLANKLINES
***special settings
IF drad-dokob = 'PORDER' or drad-dokob = 'STPO_DOC' or
     drad-dokob = 'STKO_DOC' or drad-dokob = 'DPR_OBJLNK'.
    PERFORM display_col_change USING 'PORDER-CO_POSNR' 1 1.   " no icon
    GF_no_edit_screen_link = 'X'.
ENDIF.
if not gf_no_edit_screen_link is initial
and display_mode NE c_dms_display.
    message w321 with intdrad-dokob.
endif.
ENDMODULE.                             " L201_BLANKLINES OUTPUT
I hope this information is usefull for you. In that case please reward points.
Best regards,
Christoph

Error in Creation of BW data source

Hi All,
While creating a data source, i am selecting the Origin type Business ware house cube & in the RFC destination field i can able to select the BW syste. The problem is when i go to the next filed BW report and try to get the relevant BW report from F4 the system shows a log error as "System error in System" Message no. CRM_MKTTG_DS_MISC033.
In second case
I have taken an existing BW Data source and tried to recreate it manually filling all the fields with existing data source, RFC destination, BW report, Business partner and Function module.
In this case the system doesnu2019t throws any error, it is working fine if I create manually.
I am in a dilema why the system behaving like this. could you please throw some light on this issue.
Thanks in advance,
Vijay.

Hi,
See the link.
http://help.sap.com/saphelp_crm50/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
regards
Srinu

Unable to capture the Data Source into a Transport Request

Hi All,
We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
Regards,
Sachin Dehey.

Hi Sachin,
Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
In BW, datasources are not transported, only their replica is transported.
Transportation of Datasource is done in R/3. Only their replica is transported in BW.
So wht ever you have done till now is correct. So go ahead.
While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
Regards,
Vishnu.

Using a SQL data source and XML data source in the same template

I am trying to develop a template for the Request for Quote report generated in Apps 11.5.10. I have loaded the data from the XML output into the template, but I am missing one field - I need the org_id from the po_headers table. Is it possible to use a sql data source (i.e., "select org_id from po_headers_all where po_header_id = [insert header_id from xml data]...") in addition to the xml data source to populate the template at runtime? When you use the Insert > SQL functionality is it static at the time the template is created, or does it call to the database at runtime? I've looked through all the docs I could find, but this isn't clear.
Thanks for any help or suggestions you may have.
Rhonda

Hi Pablo
Thats a tough one ... if you go custom with a data template you will at least get support on the data template functionality ie you have a problem when you try and build one. You will not get support on the query inside the data template as you might have gotten with the Oracle Report, well you could at least log a bug against development for a bad query.
Eventually that Oracle Report will be converted by development anyway, theres an R12 project going on right now to switch the shipped OReports to data templates. AT this point you'll be fully supported again but:
1. You have to have R12 and
2. You'll need to wait for the patch
On reflection, if you are confident enough in the query then Oracle will support you on its implementation within a data template. Going forward you may be able to swap out your DT and out in the Oracle one without too much effort.
Regards, Tim

"Open sql" report no data sourced defined in windows

when I want to import data from sql database, the Open sql window report error
"There are no data sourced defined. Please create one to continue",
but I have defined the odbc data source using windows 's odbc administrator, why the error?
chuliang

A couple of possibilities.
First are you licensed for Sql interface? If not, you might get that message.
Second, where did you create the ODBC connection on your computer or the server. It has to be on the server.
Third, did you create the odbc as a system driver? it needs to be so
Fourth, what operating system? If it's unix or AIX there is a hole bunch more you need to do to get odbc connections working. If it's windows, it's pretty easy.
Fifth, did you test the connection before trying it in Essbase?

Excel-2007 cannot connect to Oracle ODBC data source, Control Panel can.


I cannot make an ODBC connection from Exce-2007 to Oracle work. I am an expert Excel and VBA user (since 1994) and I have frequently used Excel to access ODBC databases, including Oracle (I have done this with Excel-2003 both with worksheet queries and have written VBA ADO-connection routines). And even though in Excel-2007 a worksheet ODBC query is supposed to be easier to create than in previous version of Excel, my connection fails. Any suggestions and all help are welcome and much appreciated.
DETAILS


1) What is my system? I am using Excel-2007 on Windows Vista x64 and Oracle server v.11g on my computer (all this is on my computer, no network issues).
2) Why use Excel with Oracle at all? I use Excel-2007 to access Oracle rather than Access-2007 (or any other application like TOAD, etc.) because I do engineering calculations with the data stored in Oracle. These calculations are easier done in Excel (I suppose that one alternative to this could be to use some sql or Access to get the data from the database, then store it as plain vanilla CSV file, then open this file in Excel, then do the math (the math involves complex optimisation algorithms), then save the results as CSV, then use some sql or Access to put the data back into the database. Howwever this does not strike me as a quick or neat solution. And after all Excel has been designed to access ODBC databases, so why not use it?)
3) What do I do in Excel-2007 that won't work? I create an ODBC link to Oracle that does not work. In Excel-2007 this is straightforward:

<ul>
<li>define an ODBC connection (Data tab --> From other sources --> From data connection wizard);</li>
<li>define a query on the worksheet -- that's it, this is all!</li>
</ul>

I start with creating an ODBC connection:
a) I choose an ODBC data source type: ODBC DSN
b) Excel-2007 displays the list of the available ODBC data sources. I see in it my Oracle database name and I select it.
c) Excel-2007 displays the Data Link Properties:
- the "Provider" has a list of the OLE DB drivers with preselected "Microsoft OLE DB Provider for ODBC Drivers". I keep this default selection.
- the "Connection" tab has a connection string "DSN=<my database name>" which I keep, it also has fields for the user name and the password, which I fill with the correct credentials.
- Finally there is a button "Test Connection", which when I click produces the following error message:
"Test connection failed because of an error in initializing provider. 
Unespecified error"

4) Additional food for thought:
a) In the above walk-through the only data, which I type, are the user name and password, everything else is selected from lists offered by Excel-2007, hence any possibility of typos being the cause of the problem can safely be discarded.
b) I can test the ODBC driver in the Control Panel and it shows that it can connect to the Oracle database:
- in Control Panel --> Admin Tools --> Data Sources (ODBC) on the "User DSN" tab I can see the list of the available ODBC data sources (same list as in Excel-2007, point 3b above) with the name of my database in it;
- selecting the name of my database from the list of the sources and clicking "Configure" button opens a tab with Data Source Name (same as in Excel-2007), TNS Service Name and User ID. I enter <user name>/<password> and click "Test Connection" button. A message "Connection successful" appears (just for a test I enter incorrect user credentials and "Unable to connect" message appears)
BOTTOM LINE


The procedure for using an ODBC connection from Excel is very simple, in the past I have created and used such connections numerous times with Excel-2003 and earlier on Win-XP and earlier. But now on Excel-2007 and Vista-x64 I cannot make it work.
Also, testing an ODBC connection driver is really easy and simple to be done in the Control Panel. There testing the same ODBC connection, which fails in Excel-2007, results in success.
I am frustrated by the simplicity of the problem and yet the persistant error. I have lost now two full days in failed attempts to make the simple procedure work and in searching the internet for answers.
All help is highly appreciated <img class="emoticon" src="images/emoticons/happy.gif" border="0" alt="" width="16" height="16" />,
Plamen


Did you find the solution to your problem?
If not, I think I may know.
Excel 2007 is a 32-bit application.
When installing 32-bit applications in a 64-bit environment, the "default" location is:
C:\Program files (x86)\...
Excel then launches from this location.
However, when it connects to Oracle and passes the name of the calling program, Oracle attempts to "interpret" the value of (x86) as if
the value within the parenthesis are being passed as a reference. Of course, iOracle doesn't find anything, so the result is (),
and then it cannot return the connection info back to the calling application.
I corrected it by installing Excel in C:\Program Files\, and once launched from that location, it works the same as on the 32-bit machines.
However, at my location, they are FORCING Excel to be installed in the(x86) location.
What I'm trying to discover now is:
Is it possible to flag Oracle to NOT process the embedded variables?
Or, is it possible to assign a variable in Oracle such that x86 = "(x86)", so that the end result is viable?
Have you had any luck with your installation?
thanks,
Paul

Refreshing the Data Source View in Analysis Services

I have added columns to the SQL Database table that is used as a dimension in an Analysis Services Cube. The new columns will be used as additional Property Fields for the dimension. When I attempted to refresh the Data Source view so that the additional columns are present, I am given the following error:
System.Data
Property not accessible because 'Parent Columns and Child Columns don't have type-matching columns'
I have done nothing to the columns used for the parent of child and the error message provides nothing to gon on. Does anyone have any ideas on this?
Gary

Olga,
Thanks for your response. I will try and answer your questions
1) I have not tried removing the columns yet. I will try that this afternoon but have limited hope. The two columns I added are simple text columns that will be used as attributes in the dimension. I have made no change to the parent or child columns.
2) The table I modified is the source table for a parent-child dimension.
3) The reference to the "check list" does not take me to any kind of check list.
4) The parent-child dimensions I am trying to modify have been in use for months and the parent and child columns do have the dame data types.
5) I have also check the data types between the dimension table and the fact table. they use the same data types (small int).
6) I have not made a collection for the parent key, it is a single column. The remainder of your last paragraph is not clear to me. Can you give me an example.
I am fairly inexperienced with Analysis Services, please talk slow and use small words :-)
Thanks again for your help!
Gary

BOM data source ... Li Xu???

Similar Messages

Maybe you are looking for