Bex report does not display key figures

Friends,
Need help urgently.
We have a report of a multicube(MC1). key figures of one of the infocube(IC1) in the multicube(MC1) does not showup on the report.
If reported independly on that IC1 it does show all values. This sounds really weird but its taking up all my time.
Please friends, need your inputs on what else could have gone wrong.
FYI...earlier we had same problem but creating new report on this multicube resolved problem. But this time, we have a new KF added to the infocube(IC1). But no change to the reports are made. Even though problem occurs. I even transported all the rules, multicube and infocube.
Please help me identify what could be the cause for it.
-Raj

Gupta,
Thanks, this resolved my problem.
But here;s another issue that came up now.
I have a keyfigure (conversion factoor to EA) as attribute to master data infoobject (zmatnr). I have this included in the multicube. On the query, I have created a replacement path variable for conv. factor and this works well with all reports except this sales report which has key figures included from multicube(from multiple infocubes in muticube. Any idea what is that i am doing wrong?
thanks

Similar Messages

Bex report does not show loaded data at once

Hi experts,
Why Bex report does not show loaded data at once after loading is finished but after some time?
Could be the reason of it:
a) huge amount of data in infocube.
b) there are no deleting/creating indexes before/after loading, because it takes too much time
c) anothe reason?
Thank you,
Tigr_Z

Hi Tigr,
A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
C - it can be resource issue, so please look into all and double check with basis if thats the case.
Regards
Sunny

MobileMe Gallery from A3 Does not Display Key Photo

When I post from Aperture 3 to MobileMe, the Gallery preview pic does not display the key photo anymore. Skimming still works, but the preview pic as seen in the gallery is not displayed. Instead of the preview picture, an icon is displayed that is gray with two stacked pictures.
If I go to me.com and manage the gallery from there, I do see a preview picture but not the key photo. Instead, I see the first photo from the project.
In Aperture 2, I did not see these behaviors.
Anyone else seeing this problem?

Ron Kaplan wrote:
When I post from Aperture 3 to MobileMe, the Gallery preview pic does not display the key photo anymore. Skimming still works, but the preview pic as seen in the gallery is not displayed. Instead of the preview picture, an icon is displayed that is gray with two stacked pictures.
If I go to me.com and manage the gallery from there, I do see a preview picture but not the key photo. Instead, I see the first photo from the project.
In Aperture 2, I did not see these behaviors.
Anyone else seeing this problem?
Yes, I noticed this too.
I can skim the gallery (like an event) but then it just gives a generic thumbnail as the key photo.

Report does not display some data

Hi,
Using:
- Crystal Reports 2008 SP3 as development platform.
- Visual Studio 2008 to launch the crystal report.
- SQL Server 2005 SP3 as database
Crystal Report:
- rpt file has been set up for a couple of months, working fine uptill last friday
- dataset comes from a SQL Server stored procedure with some parameters. Executing this stored procedure with these parameters, returns the correct result set
- showing the report using the Crystal Reports Viewer, some fields remain blank since the beginning of this week. Why does the report does not show all the data that is in the result set of the stored procedure ?
Any idea for a solution ?
Any idea to debug such strange behaviour ?
Thanks a lot for any help.

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

BI Publisher Report does not display decimal numbers

Hi,
I have created a one page BI Publisher Report. I generally take the .xdm and .xdoz files and send it to the client which they upload on their server. The report has been coming up fine until recently there was a glitch on the Client Server. Now the report does not show a a section which has decimal numbers. I can see it perfectly on my machine. I am extremely frustrated to search for a solution and client is not very helpful in providing the information what went wrong or what was the fix on their server. Any help is greatly appreciated.
Thanks,
DRL

user8824622
If i am understanding your issue right i guess i have faced the same one while ago.
The solution for this one is, if you are on the latest patch or update, i am on July update
Go to
Administration--> manage Bi Publisher under Bi Publisher --> under run time configuration --> properties --> the last option on the list which is Use 11.1.1.5 compatibility mode true --> apply
now it should be working
Please let me know if it worked out and mark as correct if it have solved the issue
Thank You

Report Does Not Display Data from Non-BCS Cube

Hi,
I have the following scenario.
I have a MultiProvider with two real-time cubes. Cube A is used to store Actual data and Cube B is used to store Budget data.
Cube A is used by BCS, so the real-time load behavior is set to "Real-Time Data Target Can Be Planned; Data Loading Not Alllowed".
Cube B is not used by BCS, so data is being loaded using BW InfoPackages, with real-time behavior set to "Re-Time Data Target Can Be Loaded With Data; Planning Not Allowed"
My BCS has two Consolidation Group hierarchy. One is for Legal reporting and another one is for Business Segment reporting. So, if I have a Consolidation Unit, COMPANY1, it would belong both hierarchies, e.g. LEGAL1 and BSEG1.
In my query, I have no problem displaying Actual data when I specified Reporting Mode (0BCS_REPMOD) = Standard. (S). However, Budget data does not get displayed. FYI, I have uploaded data twice for each record i.e. LEGAL1 and BSEG1 in the Cons Group (0SEM_CGCOMP) characteristic.
Any idea on how can I get the budget data displayed?
Thanks.

Hi,
Have you Identified Characteristics and Selected Key Figures:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/cf/bc734190ba137de10000000a155106/frameset.htm
Without proper construction of multiprovider you'll not be able to see both cubes.

Report does not display data

I have a crystal XI report that when run will not display data; if the report should be six pages that is the number of pages that will be generated. The problem is that the pages show up as blank. If the blank pages are exported the exported file will contain data, if the report is sent to a printer the report will contain data, but no data is ever displayed on the screen. This report has been loaded on 15 other computer and runs perfectly. Any help would be greatly appreciated. By the way if this user logs in remotely and runs this report it will display data.

A few ideas;
1) Make sure you are working with [SP 6|https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe].
You are on SP 2...
[SP6 msm|https://smpdl.sap-ag.de/~sapidp/012002523100000634032010E/crxir2sp6_rdc_mm.zip]
2) Try different resolutions
3) Try to see if there is an updated video driver
4) Make sure there is a default printer driver installed.
5) Run [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] see if there are any differences in dlls loading on a box that works and the one that does not (CR and non CR dlls).
Ludek
Edited by: Ludek Uher on Feb 22, 2010 10:32 AM

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write(" <center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

BI publisher report does not displays parameters in dashboard

HI to all,
I have created a report in BI publisher with Parameters and list of values and it works as expected while running it through the BI Publisher.
I also added it into a dashboard, the dashboard displays the report correctly but it doesn't allow me to select/choose the list of values or to prompt for other values.
I wonder now if there is something wrong with the Publisher report and/or the dashboard or maybe OBIEE does not allows to place BI publisher report with parameters inside a dashboard.
Thanks
Roberto

If you embed the Bi publisher Report, you won't be able to see the parameters. Instead bring it in as a Link and then when you click on the link you should be able to see a new window pop up with parameters showing.
Alternatively, you can create dashboard prompts and have the publisher report filtered via those prompts.
Thanks!

Report does not display data in Oracle Applications

I created a custom report and registered the same under Oracle Order Entry. The report uses 1 parameter and whereas everything is registered in Oracle apps. correctly, the report draws a blank upon completion. The only visible thing is the header part.
This report though works fine if run directly from Reports Designer.
Anybody know what specific setting (if required) needs to be made in Oracle Applications? Further in order that you can know the picture, whatever is enclosed in the Repeating Frame does not show up in App. but as pointed earlier works just fine from Reports Designer.
Any help would be greatly appreciated.

I am using a browser (FireFox v2) based InfoView so I guess it is the DHTML viewer.
On the server it is java (Tomcat). The report uses a custom driver (crdb_ado).
Currently all the servers (RAS, page, cache etc) are running under LocalSystem account. I don't understand what a domain account is, is it administrator?
The interesting part is, I was able to upload and run 8 other reports before I experienced this problem. Have I hit some limit?
I appreciate your help. Please share any other ideas/insights on this issue.
Regards

ReportViewer control used with a remote report does not display any data.

Hi there,
I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
and it needs to impersonate the caller's identity because the database uses Windows Authentication.
Here is the code I use:
var reportViewer = new ReportViewer();
// Set Processing Mode
reportViewer.ProcessingMode = ProcessingMode.Remote;
// Set report server and report path
reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
// set the credentials
reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
// create report parameters and set them in the report
var param1 = new ReportParameter("First_Param", "Some string");
var param2 = new ReportParameter("Second_Param", "Some other string");
reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
using (var reportForm = new ReportForm(reportViewer))
reportForm.ShowDialog();
The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
public ReportForm(ReportViewer reportViewer)
InitializeComponent();
try
this.reportViewer = reportViewer;
reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
reportViewer.Dock = DockStyle.Fill;
reportViewer.ZoomMode = ZoomMode.Percent;
reportViewer.ZoomPercent = 100;
reportViewer.RefreshReport();
catch (Exception exception)
MessageBox.Show(exception.Message);
Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
Any suggestions?
TIA,
Ed

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Crystal Reports 13 VS2010 Report does not display new data

The project is written in VS2010 connecting to an Access 2007 DB. It is running on a local network. All reports work fine from the standpoint that data is displayed on the reports HOWEVER, if a data table is updated the newley entered records do not show up on the report yet when I examine the database the records have been added to the table.
I hit refresh and the new records still do not appear. I've closed out the session and re-started the software and the records do not appear. It's almost as if the DB is 'frozen'. Suggestions?

Hey Ludek,
Problem with that sample is it hits the MDB directly and not the ODBC DSN. The Jet engine is being deprecated by MS so the solution is to use ODBC or OLE DB to any version of Access.
I've posted this multiple times but here it is again:
Try using the replace connection method to update the location of the DSN:
private void ReplaceConnection_Click(object sender, EventArgs e)
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
ISCDReportClientDocument rcd;
rcd = rptClientDoc;
rptClientDoc.DatabaseController.LogonEx("dwcb12003", "xtreme", "sb", "pw");
//Create the logon propertybag for the connection we wish to use
CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag logonDetails = new CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag();
logonDetails.Add("Auto Translate", -1);
logonDetails.Add("Connect Timeout", 15);
logonDetails.Add("Data Source", "dwcb12003");
logonDetails.Add("General Timeout", 0);
logonDetails.Add("Initial Catalog", "Orders");
logonDetails.Add("Integrated Security", "True");
logonDetails.Add("Locale Identifier", 1033);
logonDetails.Add("OLE DB Services", -5);
logonDetails.Add("Provider", "SQLOLEDB");
logonDetails.Add("Use Encryption for Data", 0);
logonDetails.Add("Owner", "dbo"); // schema
//Create the QE (query engine) propertybag with the provider details and logon property bag.
CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag QE_Details = new CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag();
QE_Details.Add("Database DLL", "crdb_ado.dll");
QE_Details.Add("QE_DatabaseName", "Orders");
QE_Details.Add("QE_DatabaseType", "OLE DB (ADO)");
QE_Details.Add("QE_LogonProperties", logonDetails);
QE_Details.Add("QE_ServerDescription", "dwcb12003");
QE_Details.Add("QE_SQLDB", "True");
QE_Details.Add("SSO Enabled", "False");
QE_Details.Add("Owner", "dbo");
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo newConnInfo = new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo oldConnInfo;
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfos oldConnInfos;
oldConnInfos = rcd.DatabaseController.GetConnectionInfos(null);
for (int I = 0; I < oldConnInfos.Count; I++)
oldConnInfo = oldConnInfos;
newConnInfo.Attributes = QE_Details;
newConnInfo.Kind = CrystalDecisions.ReportAppServer.DataDefModel.CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
rcd.DatabaseController.ReplaceConnection(oldConnInfo, newConnInfo, null, CrystalDecisions.ReportAppServer.DataDefModel.CrDBOptionsEnum.crDBOptionDoNotVerifyDB);
See if that works for you. You'll have to change the info to ODBC from OLE DB. You can get the info from an app also, Ludek has a link to it, it will generate code to use RAS to set log on info...
Don

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

Bex report doesn't display full text information......

Hi Experts,
My bex report is not displaying full text information.
I have set that particular infoobject length as 40 and also have selected long text and Long Description in Bex Tab of the InfoObject.
In my DSO the data is available in complete lenght but in my Bex report it just displays half information
Instead of displaying Service Order Released its displays Service Order Rel
Can anyone help me to resolve this issue please.
Thanks

Hello,
Setting up the BEx Property for Object, is not sufficient enough to display in the query output. You can always overwrite the object level settings in the query designing.
Moreover, when you create a query, system always overwrite your object level settings and apply the query level settings.
Make sure, you have selected Long Text in the query for that characteristic.
- Danny

Subject: Displaying key figures without currency unit in BEX reports

Hello,
Is it possible to display key figures without currency unit in BEx reports? For example; Material Costs 1000 EUR
should be shown as 1000. Currency unit EUR and also scaling factor (*1000 EUR) does not interest us.
When we use display options in query properties, we just see an option of displaying key figures with/without scaling factors, which does not solve our problem.
Thanks for your reply.
Regards,
Nuran Adal

Hi Eugene,
thank you very much for your quick reply. We have very detailed reports with min. 10 columns, I should have defined 10 more formula columns to realize this (NODIM), but anyway there is no other way to do this, am I right?
Best Regards,
Nuran

Bex report does not display key figures

Similar Messages

Maybe you are looking for