BOM explode Button message

Hello All,
In Purchase req, pur order for subcontracting there is a Explode BOM push button in material data tab page. My requirement is that when user will click on it, system should give a warning message that" Do you want to Reexplode BOM". How can I do this

Hi,
This is available in the STD SAP, If you have the material bom correctly in CS03, then you can see this button and it will give the message as "Do you want to re-explode the bom".
Regards,
Mohd Ali.

Similar Messages

BOM Explode in delivery

when i am creating a delivery document with out reference using VL01NO transaction,whenever i enter a BOM article it has to explode.
(as an sap standard BOM won't explode in delivery document)
can anybody suggest solution for this requiremnet.

Hi Srinivas
Check item category.
For my knowledge BOM will explode in delivery. But Picking will be done for main item. If u have maintained
main item ERLA in Material Master.
The Material Ordered, Delivered and Billed consists of one or Several Components.
These components are called as Bill Of Materials
The Material Ordered by the Customer is referred as Main Item or Higher Level item. The Components are referred as Sub-items.
When we enter the Main-item in the Sales documents, the Components are automatically determined and this is called as expansion of Bill Of Materials.
In SD, we treat the processing of Boms in two ways.
     Processing at Main-item.
     Processing at the Sub-item
The Processing in both cases is controlled by the Item Categories and Schedule line Categories.
Step: 1
   Prepare the Martial Master for all the Materials, which is main-item and Sub-item.
In the Material Master, the Item Category group of the Main-item is important.
We need to Maintain the item category group for the Main-items and sub-items as follows.
Scenario               Main-Item                    Sub-Item
Processing at               ERLA                         NORM
Main-item level
Processing at               LUMF                         NORM
Sub-items
Item Category               TAQ                         TAE
Schedule line               CP                         CT
Category
Step: 2
Let us take Computer as a Bom. It has Varies parts like Mouse, keyboard, Motherboard, Ram, CPU.
Let us take Computer has the main-item, and sub-item as the rest.
Prepare Material Master. We have to Prepare Material Master for Main-item and Sub-items.
T-Code: MM01
First Prepare for Computer which is the Main-item.
In Sales: General/Plant. Maintain ERLA in the Item Category Group
Then Create and Save the Material Master
Step: 3
Create Material Master for the Sub-item. That is for Keyboard, Mouse,
Motherboard, Ram & CPU.
In Sales: General/Plant. Maintain NORM in the Item Category Group
Maintain NORM in Item Category Group
Step: 4
Create Material Bom.
T-Code: CS01
Enter the Details
Then Continue.
Step: 4A
Enter the details
All the Sub-item added in the Material
Then SAVE
Step: 5
Create Condition Record.
T-Code: VK11
Maintain Pricing for only the Main-item.
Maintain Pricing only for Main-item.
Then SAVE
Step: 6
Create Sales Order
T-Code: VA01
Enter only the Main-item.
Step: 7
The Bom Explodes with the Sub-item.
And pricing is only for Main-item (Computer) and not for Sub-item.
Bom Explodes with the Sub-item.
Pricing is done only for the Main-item.
Then SAVE
Step: 8
Create Delivery
T-Code: VL01N
Picking is happening only for the Main-item and not the sub-item
Then SAVE
Check the above things. Whether u have maintained.
Reward if useful to u
Message was edited by:
        narendran vajravelu

BOM Explode in Subcontracting

Hi Friends,
I have following BOMs for same material.
A = B+ C
A = B+ D
A = B + F
I have maintained the same thru alternate BOM. Each alternate BOM is assigned to differnt Vendor (manually outside SAP)
Is it posiible I get different items for each vendor (as per alternate BOM) when making PO with item category as "L" when BOM explodes. Is there any way for doing this.
Regards

Hi Sai,
I agree with Mani Roopa, you should maintain 'source list' + 'quota arrangement + 'production versions''.
You should create production version for each alternative BOM and assign these 'production versions' through quota arrangement to sources of supply (to the subcontractors).
During MRP run, SAP will assign the vendors (exploding the relevant alternative BOM) to the PR (using QA).
Please check:
MRP & alternativ BOM
http://help.sap.com/saphelp_46c/helpdata/en/f4/7d2aea44af11d182b40000e829fbfe/frameset.htm
quota arrangement
http://help.sap.com/saphelp_46c/helpdata/en/f4/7d265244af11d182b40000e829fbfe/frameset.htm
production version
http://help.sap.com/saphelp_46c/helpdata/en/ff/515fd249d811d182b80000e829fbfe/frameset.htm
BR
Csaba

What is BOM explode?

Please explain about BOM explode in detail
Thanks in advance
Madhan

In general only :
let's say item A is a BOM Item with components B,C,D and B is a BOM item as well with components X,Y,Z and X also a BOM item with componets 1,2,3 and so on.
What BOM explode does in general is to get all the childs and grandchildrens, etc, etc from a particular item.
Hope that explains,

Which BADI craete a New Button 'Message' for PO and How?!

I just work in a retail project, and client wants to get one more button on purchase order screen (WebPage) as 'Message' to get to the screen to get access all output message assgined to this purchase order.
the customizing is:
SPRO -> Logistics general -> SAP Retail Store -> Purchase order -> Enhancements Using Business Add-Ins, with possible BADIs that can be used for this enhancement
How shall I define this BADI?!
Thanks in advance

Thanks for reply.
I'm still not still, because what we need it a button of 'Message' on PO page (WAS based on webpage), and I can press the message button for PO print as in SAPGUI.
Thanks

BOM explode in Stock Transfer Purchase Order

Hi SAP gurus,
Stock transport order from Manufacturing plant to Depot plant scenrio ,
In T.code ME21N while entering BOM maintained material it should explode its components in purchase order like Sales order .
In sales order when we are using the item categories TAQ and TAE system explode BOM materials with SD BOM 5. Is there any similar configuration / Item Categories available for STO Purchase order to explode BOM.
During Goods receipt (MIGO), BOM should explode.
Thank in advance.

hi
the bill of material is a kind of formula or ratio given to the finished product ,so that system will calculate the raw material for the finish product
so BOM will be use in item cat L as ur taking finished goods from vendor
bom is used in production for finished product
as u said in ur case we cant use the BOM as there is no consumption of raw material for finished product ,it is just transfer of material from one plant to another plant
hope it clears
regards
kunal

BUG: When using HTML buttons, message view goes to the end

As suggested by Host Kady, we are now extracting Bugs and Enhancements from our consolidation threads, and re-posting them individually.
Reported by Da Gopha:
When composing a post, selecting text and pressing one of HTML formatting buttons causes the message display to snap to the end of the text.
Whilst not a problem for small posts, it makes editing longer ones very irritating.
Kind regards,
Gopha

No, after you make the call, it's carrier business, the recipient has to contact Telstra about call that goes straight to the message bank.

Sales Bom explode for ATP subitem

Hi,
We have a senario that customer orders parent item, so we input parent item. In sales order, this parent item will go to APO for ATP check. then APT will force to create new subitem in the sales order after ATP check. After new item created, I want sales BOM can be exploded as the subitems of APO confirmed item.
It seems std SAP dun allow link any subitems to APO subitem. Does anyone has similiar solution to share? Thanks a lot.

Hi,
We have a senario that customer orders parent item, so we input parent item. In sales order, this parent item will go to APO for ATP check. then APT will force to create new subitem in the sales order after ATP check. After new item created, I want sales BOM can be exploded as the subitems of APO confirmed item.
It seems std SAP dun allow link any subitems to APO subitem. Does anyone has similiar solution to share? Thanks a lot.

Design Standard CS3 for Mac - cannot update either through installers or through "update' button - message: cannot connect to internet

Hello:
Hoping someone can help me.
I have a mid 2010 MacBook Pro.
I use the Design Standard CS3 Adobe suite.
I have the following issues:
1. CANNOT update from Illustrator CS3 13 to 13.0.2.
- If I try hitting the update button through the Illustrator menu I get the error message " Cannot connect to the Internet. Please check your settings and/or firewall" .
- I try using the standalone updater recommended as a fix in the forums, that says update failed as well.
Have uninstalled. re installed, clean installed CS3 about 5-7 times so far with no luck.
Followed all the rules, ran the cleaner
The update problem has always been there as long as I can remember. I think the issue started with Mountain Lion when I lost access to printers via CS3 and Illustrator/Photoshop would frequently crash after a layer "move".
Since like everyone else Ie paid a small fortune for this software, I finally decided I needed to do everything I could to update it, but am still unable to!
2. Since recently upgrading to Yosemite, Illustrator launch is very random - sometimes it does, sometimes it doesnt.
- Have installed Java RunTime as mentioned in forums, hasn't helped.
Slightly at my wits end here with this madness, any workarounds or solutions much appreciated, especially for point 1.
Many thanks!

Hi venkatnil, I am suddenly having the same problem with my CS3 after recently upgrading to Yosemite. I have actually been working with Photoshop, InDesign and even opened Illustrator to make sure I still could. No problems until one morning I couldn't open Photoshop. It was saying it "could not initialize because it couldn't find the disk". But just Photoshop; all the others still work fine.
So, I have another disk (not the one that originally installed CS3 all those years ago) to load Photoshop CS3. But it won't load and says "required resources are missing".
Looking around here for some answers I saw your post and realized that I've always had that same problem with the updater not able to find internet connection, too. AND I had to download an older version of Java RunTime, which seemed to go smoothly.
Now that a month or so have passed, I'm hoping you found a way to deal with this problem and can share it with me?! Or have we run into some small bug between CS3 and Yosemite that no one is going to bother with?

"please restart your computer from the power button" message

Hi,
I woke up yesterday and the computer´s fans where running like crazy. Everything was frozen so I pushed the power button in for a few seconds and restarted the computer. When it came up I used it for like half an hour and it froze again. I did the same thing because the keyboard was´t working eather.
It did that a couple of more times during the day. So I started shutting it down when I wasn´t using it.
Last night, the last time it happened, I was checking my email and this message came on full screen in 4 languages.
*"Please restart you computer by pressing the power button for a few seconds"*
Or something very similar to this.
I did it and I haven´t turn it on since then.
In the middle of all this I checked the disk and it said is was fine, the permissions as well. I don´t know if it means something thought.
I don´t know if it´s a hardware or software issue, any ideas?
Thanks!!!!

Hi japamac,
This morning the computer froze again... no messages but I had to restart it.
So, I did the things you pointed:
+-Boot to the OS X Install disc, in the second window after the language selection, from the Menu bar, select Utilities/Disk utility, and use that to "Repair Disk" on your hard drive.+
I did this and the disk was fine... it said something like +nothing to repair+
+-In the original software discs is one with the Apple Hardware test.+
+Boot to that disc and run the extended hardware test to verify system performance.+
Did the extensive test and as soon as the dialog box came up, under test results next to MEMORY, it said: error detected at startup. Then It went throughout the devises and everything passed (including the MEMORY) but there was an error code *post/0/2048 DIMMO/J11*
So, I tried to download Rember but it`s for 10.5 and higher... I´m still using 10.4... is there a similar software for my OS?
Thanks for your help!
Message was edited by: vickatter

Sales Order BOM(Usage 5)-Manual re order point VB-No BOM Explode-MD02

Hi Guru's,
I have typical requirement from my client.
Requirement is as follows.
1)There is no Production in the Plant, so NO PP module.
2)All parts are like Kit, Purchase will be Component wise and at the time of Sales, Sales will assemble(Sales BOM)
3)Requirement should trigger from Manual re order point-VB
4)Am using Material type HAWA-Trading Material
5)I have changed Usage type 5 as Production and sales, because system should Explode the BOM at MD02 and as well it should use in Sales order.
Problem is
1)If i Set MRP type PD, Strategy 10, and Demand from MD61 then system is exploding BOM and giving PLanned order and PR
2)If i set MRP type VB or V1, No strategy and Requirement should arrise from Safety stock and re order point, system wont Exploding in MD02 for Component level(child part)
Please give me advise on this issue.
Thanks,
VR

Hi Karthi,
Currently Stock is Zero and my reorder point is 10 and safety stock 5 for Parent and same this is applicable for child part.
Yes , For Parent material system generating Requirements but not exploding BOM(Child part)
Thanks,
VR

BOM exploding too early

Hello!
I'm facing a weird problem, and after spending many hours trying to figure how to solve it, I gave up.
I'm working with Manugistics, and every night the system communicates with SAP, which "downloads" all PldOrds. We produce Personal Care products, such as Shampoos and Conditioners, so part of the BOM is package, and the other part is the bulk.
The problem is that some PldOrds explode the packaging on the same date it is planned (as we expect), but the PldOrd for the production of the bulk (and therefore all raw materials below it) is exploding way before it should be (in some cases, more than 3 months before)
This also happens with subcontrating POs, exploding way before its creation date. Please take a look at two examples:
http://imageshack.us/photo/my-images/190/explosao.jpg/
PldOrd from 13/10 exploding raw materials 04/07
http://imageshack.us/photo/my-images/651/explosao2.jpg/
subcontrating PO from 10/10 exploding raw materials 04/07
http://imageshack.us/photo/my-images/838/explosao3.jpg/
PO order report: packaging explosion date is OK, but bulk is way early
what parameters should I look for? where does this come from?
Thank you for your time.
Pedro.

Hi,
System uses opening date to read PP master data. Please check the opening date of the planned orders. Opening date is determined by subtracting opening period from the order start date. Opening period is maintained in the scheduling margin key and assigned to materials in MRP2 screen. Check the openning period in the scheduling margin key assigned to the materials.
Regards.

Restart or Power Button Message doesn't end!!

Ok So when i open my computer like power it up.
There is a message saying You need to restart your computer by]
pressing the power button or restart button. I did it many times but never end?
What should I Do?

It sounds like you are experiencing a 'Kernel Panic'...read over this link and see what may help..
http://www.thexlab.com/faqs/kernelpanics.html

BOM exploding problem

Hi All,
When I am trying to process a sales order with one material witch is a BOM material It could not explode the BOM. I am getting the error as Structure explosion for item 000020 is not possible.
I checked the item category group for the material i.e ERLA and other materials also.while creating the BOM selected usage 5,itc L.Please let me know if I am missing some thing.
Thanks,
AKHI.

Hi akhi,
Now please check the header material item category settings (TAQ), there structure scope field should be A or B.
Please check the item category for the line items in the sales order.
For header items:
OR + ERLA = TAQ
For sub items:
OR + NORM + TAQ = TAE
if it is there it must work, IF it is not so, please make an assignment in VOV4 like above.
Also check u have created BOM with application 5 (SD).
I am sure u will get it. Any further queries, please post.
Reward points if it is useful

BoM exploding and hiding items in Sales Order

Hi All,
We have a requirement which needs some suggestions.
The client needs the BoM item to be supressed. I know we can do that through Sales Order Type. I am not sure if we can do through Item Categories as well. But the requirement is incase some region needs to correct price for child items, how do we display these hidden child items after we have hidden. Is it a enhancement ?
rgds..Ameet

Hello Ameet
You change the display range while in the order. Once you are in the first screen of the order (Overview usually) , use menu option Edit> Display range> All items to display the sub items also. However you might want to control this through authorization in such a way that only authorized users can view /change them. Hope this helps.

BOM explode Button message

Similar Messages

Maybe you are looking for