BOM Explosion using Function 'CS_BOM_EXPL_MAT_V2 '
Hi Gurus,
I am working on BOM and exploding the multilevel BOM using function CS_BOM_EXPL_MAT_V2.
I want to know what does 'field-RNDKZ' do in that.
Thanks!
Using Function module CS_BOM_EXPL_MAT_V2
As already has been said, the RNDKZ field is used for rounding. If you fill with '1', it will never round.
Example (the problem I had):
Material A consist of et al. 0.008 piece Material AA.
Material AA consist of 1.0 pice Material AAA,
of 7.0 piece Material AAB,
of 6.0 piece Material AAC,
of 12.0 piece Material AAD.
CASE 1: You fill RNDKZ field with '1':
You get the correct result which is:
You need for producing 1 piece of Material A
0.008 piece Material AA,
0.008 * 1 = 0.008 piece of Material AAA,
0.008 * 7.0 = 0,056 piece of Material AAB,
0.008 * 6.0 = 0,048 piece of Material AAC.
0.008 * 12.0 = 0,096 piece of Material AAD.
CASE 2: You let RNDKZ field blank.
In your user profile for BOM field "Round of" is set to blank (table field TCSPR-AMEKZ, TA S_ALR_87004496).
You get following result (which is wrong)
You need for producing 1 piece of Material A
1 piece Material AA,
1.0 *1.0 = 1.0 piece of Material AAA,
1.0 * 7.0 = 7.0 piece of Material AAB,
1.0 * 6.0 = 6.0 piece of Material AAC.
1.0 * 12.0 = 12.0 piece of Material AAD.
The number of decimals is seen depends as well from how many decimals is set for unit of measurement. In this case the number of decimals for "piece" was set to zero. (TA CUNI).
If you let the field RNDKZ field blank, the user profile field "Round of" (table field TCSPR-AMEKZ) is used.
Similar Messages
-
BOM explosion using CS_BOM_EXLP_MAT_V2.
Hi All,
i am using FM :- CS_BOM_EXLP_MAT_V2 for the BOM explosion, but the problem is when the material is exploid i get the component of that material according to the plant but the some component which i get have no more list component in the same plant,but that component have the list component in the other like with other component, so i am not able to list out how much deep i have to go in the hierarchy .
Thanks in advance.
Regards,
Ritesh JhaHi All,
i am using FM :- CS_BOM_EXLP_MAT_V2 for the BOM explosion, but the problem is when the material is exploid i get the component of that material according to the plant but the some component which i get have no more list component in the same plant,but that component have the list component in the other like with other component, so i am not able to list out how much deep i have to go in the hierarchy .
Thanks in advance.
Regards,
Ritesh Jha -
Multi-level BOM explosion using CS_BOM_EXPL_MAT_V2
Hi All,
I would like to know, if anyone has used the function module 'CS_BOM_EXPL_MAT_V2' to prepare a report to read multi-level BOM just like CS12. If anyone has, can you please let me know how we can read the individual materials in the BOM from this FM.
Hope my question is clear, await inputs.
VivekHi vivek,
We use this code to restrict the BOM line item for particular movements. C if that can help u out.
CALL FUNCTION 'CS_BOM_EXPL_KND_V1'
EXPORTING
capid = ''
datuv = sy-datum
emeng = 1
mehrs = 'X'
mtnrv = i_mseg-matnr
stlal = '1'
stlan = '1'
stpst = 0
svwvo = 'X'
werks = i_mseg-werks
vbeln = aufk-kdauf
vbpos = aufk-kdpos
VERID = ' '
vrsvo = 'X'
IMPORTING
TOPMAT =
DSTST =
TABLES
stb = ZStb
MATCAT =
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT zstb BY mtart.
LOOP AT zstb.
IF zstb-mtart = 'Material type ' OR zstb-mtart = 'Material type ' .
ELSE.
DELETE zstb .
ENDIF.
ENDLOOP.
CLEAR: v_menge, v_matnr, v_bwart, vv_menge, vvv_menge, zstb.
LOOP AT zstb.
SELECT menge matnr bwart
INTO (v_menge,v_matnr,v_bwart)
FROM aufm
WHERE aufnr = i_mseg-aufnr
AND werks = i_mseg-werks
AND matnr = zstb-idnrk
AND ( bwart = '261' OR bwart = '262' ).
and meins = 'FT2'.
LOOP AT zstb.
SELECT SINGLE matnr INTO vv_matnr FROM mara WHERE matnr = v_matnr
AND mtart = zstb-mtart.
IF sy-subrc = 0.
CASE v_bwart.
WHEN '261' .
vv_menge = vv_menge + v_menge.
WHEN '262' .
vvv_menge = vvv_menge + v_menge.
ENDCASE.
ENDIF.
ENDLOOP.
ENDSELECT.
CLEAR vf_menge.
vf_menge = vv_menge - vvv_menge.
CLEAR vv_menge.
CLEAR vvv_menge.
Regards,
Vishal -
BOM explosion using variant configuration
Hi
I have a material (LAPTOP) and it has two BOM(RAM and HARD DISK).
LAPTOP is my main material.
Through VA01, when I try creating a Sales Order, I give the Material as LAPTOP and when I click "Configuration" menu, I will be showing the Variant Configuration Characteristic values for this material (LAPTOP) namely RAM and HARD DISK.
When I select them and come back to VA01 scree, I could see both the sub materials (RAM and HARD DISK).
But my question, I want to see only the one which I select. If I select RAM, then only RAM shoudl be displayed in my sales order not HARD DISK.
I have created the Characteristics as "Multiple Value" assignmetn
Please help.
Thanks in Advance,
PriyaHi Priya,
Use Dependency concept ,to achieve your requirement.
Regards,
Subash. -
Hi,
For multilevel BOM explode I have to use the "Functional Module" CS_BOM_EXPL_MAT_V2. I checked it in system but I didnt understand which input parameters I need to give (Which are mandatory) as ther are lot of input fields available.
Please suggest whether this Functional Module is fine OR there is any other way? also suggest about the input field data.Dear
Function module CS_BOM_EXPL_MAT_V2 is used for BOM explosion for a given material. It belongs to function group CSS4 u2013 BOM explosions. This function module can explose multi-level BOM with a given validation date.
You need to specify necessary input parameters to call this function module, such as CAPID u2013 App ID, DATUV u2013 Validation date, MEHRS u2013 Multi-level, MTNRV u2013 Material number, STLAL u2013 alternate, STLAN u2013 BOM usage.
Some useful tables you can provide to your ABAPer and discuss the same .
TABLES: MARA, "Master Data
MAKT, "Matl Desc.
MARC, "Plant Data for Matl.
MAST, "Bom to material link
STKO, "Bom Header
STPO. "Bom Item
Refer : Multi-level BOM explosion using CS_BOM_EXPL_MAT_V2
Regards
JH
Edited by: Jiaul Haque on Jan 3, 2011 10:24 PM -
Find BOM number by BOM explosion number
Dear all,
How can i find the BOM number used in a planned order ? by BOM explosion number ? Which tables shall i use ?
Cheers,
OlivierHi,
you can use following Function Module for BOM Explosion.
CSAP_MAT_BOM_READ
CS_BOM_EXPL_MAT_V2
CS_BOM_EXPLOSION
CS_BOM_EXPLOSION_MAT" or "CS_BOM_EXPL_MAT_V2
Tables related To BOM
STPO BOM Item Details
STPU BOM Sub Items (designators)
STKO BOM Header Details
MAST BOM Group to Material
STZU BOM History Records
STAS BOM Item Selection
STPF BOM Explosion Structure
PLMZ Allocation of bill of material items to operations
Regards,
Sankaran -
How about this implementation of BOM Explosion(simulate stack)
REPORT YZWX00301_06 LINE-SIZE 142
LINE-COUNT 65
MESSAGE-ID YM1
NO STANDARD PAGE HEADING .
INCLUDE
INCLUDE: YXXI00050.
*TABLES use table define
TABLES: MARA, " Material General Table
MARC, " Plant Data for Material
MDMA, " MRP Area table
EORD, " Vendor table
A018, " Vendor material mapping table
KONP, " Vendor condition table
MAST, " Material BOM table
STPO, " Material BOM Component table
STAS. " Material BOM Component table detail
*CONSTANTS define
CONSTANTS:
C_DAT_X TYPE C VALUE 'X',
C_MODE LIKE dxfields-fileoper VALUE 'R',
C_MASK LIKE dxfields-filemask VALUE '.',
C_FLG_LOCATION TYPE C VALUE 'A',
C_DFPATH(15) TYPE C VALUE '\bmwx\'.
Work Area Define
---- build stack structure -
DATA: BEGIN OF WK_STACK,
LEVEL(1) TYPE C, "Save Level
QUANT TYPE I, "Save Quantity
END OF WK_STACK.
---- BOM work area -
DATA: BEGIN OF WK_BOM,
LEVEL(1) TYPE C, "BOM LEVEL
MATNR LIKE MARC-MATNR, "MATERIAL 18
POSTP LIKE STPO-POSTP, "ITEM CATEGORY 1
MENGE LIKE STPO-MENGE, "BOM COMPONENT 13
DATUV LIKE STPO-DATUV, "VALID FROM 10
DATUB LIKE STPO-DATUV, "VALID TO 10
END OF WK_BOM.
---- DATA work area -
DATA: BEGIN OF DATAITEM,
LEVEL(1) TYPE C, "BOM LEVEL
MATNR LIKE MARC-MATNR, "MATERIAL
POSTP LIKE STPO-POSTP, "ITEM CATEGORY
MENGE LIKE STPO-MENGE, "BOM COMPONENT
DATUV LIKE STPO-DATUV, "VALID FROM!!!
DATUB LIKE STPO-DATUV, "VALID TO
EKGRP LIKE MARC-EKGRP, "PURCHASE ORG
LIFNR LIKE EORD-LIFNR, "Vendor code 10
MARK(1) TYPE C, "Mark
KBETR LIKE KONP-KBETR, "Rate price 11
KONWA LIKE KONP-KONWA, "Currency 5
KPEIN LIKE KONP-KPEIN, "Unit Qty 5
KMEIN LIKE KONP-KMEIN, "Condition Unit 3
DATAB LIKE A018-DATAB, "Condition from 10
DATBI LIKE A018-DATBI, "Condition to 10
END OF DATAITEM.
---- File Line work area -
DATA: BEGIN OF LINE,
WERKS(4) TYPE C, "Plaint 4
MATNR(18) TYPE C, "Material Number 18
EKGRP(3) TYPE C, "Purchase Group 3
LIFNR(10) TYPE C, "Vendor code 10
VDATU LIKE EORD-VDATU, "Vendor valid from 10
BDATU LIKE EORD-BDATU, "Vendor valid to 10
MARK(1) TYPE C, "Mark
KSCHL(4) TYPE C, "Condition type 4
KBETR(18) TYPE C, "Rate price 11
KPEIN(5) TYPE C, "Rate unit 5
KONWA(5) TYPE C, "Currency 5
KMEIN(3) TYPE C, "Condition Unit 3
DATAB LIKE A018-DATAB, "Condition from 10
DATBI LIKE A018-DATBI, "Condition to 10
END OF LINE.
*Local Data Object Define
DATA: WK_CNT TYPE I, "Count variable
WK_LVL TYPE I, "BOM level
WK_QTY TYPE I. "BOM component qty
DATA: WK_LIFNR LIKE EORD-LIFNR,
WK_MATNR LIKE MARC-MATNR.
*Internal Table define
DATA TAB_STACK LIKE STANDARD TABLE OF WK_STACK. "STACK TABLE
DATA TAB_BOM LIKE STANDARD TABLE OF WK_BOM. "FOR BOM
DATA TAB_DATA LIKE STANDARD TABLE OF DATAITEM. "FOR ALL
Parameter in Block1
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME. "TITLE TEXT-001.
PARAMETERS:
P_WERKS LIKE MARC-WERKS DEFAULT 'WX01', "Plant
P_STLTY LIKE STPO-STLTY DEFAULT 'M', "BOM Category
P_MATNR LIKE MARC-MATNR OBLIGATORY, "Material
P_STDAT LIKE EORD-VDATU OBLIGATORY DEFAULT SY-DATUM. "Standard Date
SELECTION-SCREEN END OF BLOCK B1.
Parameter in Block2
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: P_SCREEN RADIOBUTTON GROUP R1. "Screen output
SELECTION-SCREEN COMMENT 03(21) TEXT-001.
SELECTION-SCREEN POSITION 32.
PARAMETERS: P_FILE RADIOBUTTON GROUP R1. "NTFILE output
SELECTION-SCREEN COMMENT 34(17) TEXT-002.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
Parameter in Block3
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME.
PARAMETERS:
P_NTFILE(45) TYPE C LOWER CASE OBLIGATORY.
P_PCFILE LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B3.
INITIALIZATION
INITIALIZATION .
CLEAR : WK_CNT,
WK_LVL,
WK_QTY,
WK_MATNR,
WK_STACK,
WK_BOM,
DATAITEM.
WK_LVL = 0.
WK_QTY = 1.
REFRESH: TAB_STACK,
TAB_DATA,
TAB_BOM.
*& AT SELECTION-SCREE ON VALUE-REQUEST
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_NTFILE.
PERFORM F_SHOW_FILE_POPUP CHANGING P_NTFILE. "Popup display
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PCFILE.
PERFORM F_FILENAME_GET USING P_PCFILE
CHANGING P_PCFILE.
*& Form F_FILENAME_GET
--> ST_DAT_PATH : Preset path
<-- ST_DAT_FILENAME : Selected file name
FORM F_FILENAME_GET USING st_dat_path
CHANGING st_dat_filename.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = SPACE
def_path = st_dat_path
mask = ',.,.,'
mode = '0'
title = 'TXT-file select'
IMPORTING
filename = st_dat_filename
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE s002(yf1) WITH 'F_FILENAME_GET' sy-subrc.
ENDIF.
ENDFORM. "F_FILENAME_GET
MAIN PROCESS
START-OF-SELECTION.
---- Check material -
PERFORM CHECK_PROD.
---- get vendor data -
PERFORM GET_VENDOR_DATA.
---- output screen/file -
IF P_SCREEN = 'X'.
PERFORM SET_OUTPUT. "Output to screen directly
ELSEIF P_FILE = 'X'.
IF P_PCFILE <> ''.
PERFORM DOWNLOAD_DATA. "Write data into ntfile
ELSE.
MESSAGE E007(00) WITH 'P_PCFILE'.
ENDIF.
ENDIF.
END-OF-SELECTION.
ULINE (142).
WRITE: /002 'Component Material Count:', WK_CNT.
TOP-OF-PAGE
TOP-OF-PAGE.
WRITE: /002 'Product:', 013 P_MATNR,
030 '****** BOM Price List ******',
070 SY-DATUM,
095 'PAGE:',
100 SY-PAGNO.
ULINE (142).
WRITE: /001 '|Level',
007 '|Material',
026 '|Cat',
030 '|Quantity',
044 '|From',
055 '|To',
066 '|PurG',
071 '|Vendor',
082 '|MK',
085 '|Price',
101 '|Crncy',
107 '|UnitQty',
115 '|Unit',
120 '|From',
131 '|To',
142 '|'.
ULINE (142).
*&FORM CHECK_PROD
text
-->p1 text
<--p2 text
FORM CHECK_PROD.
SELECT SINGLE * FROM MARC
WHERE WERKS = P_WERKS " Plant
AND MATNR = P_MATNR " Material
AND DISPR IN ('F100','F200'). " Product
IF SY-SUBRC = 0.
PERFORM CHECK_BOM1 USING MARC-MATNR MARC-WERKS. " CHECK_BOM1
ELSE.
MESSAGE E022.
ENDIF.
ENDFORM. " CHECK_PROD
*&FORM CHECK_BOM1
text
-->p1 text
<--p2 text
FORM CHECK_BOM1 USING VALUE(FP_MATNR) VALUE(FP_WERKS).
SELECT SINGLE * FROM MAST
WHERE MATNR = FP_MATNR AND "Material
WERKS = FP_WERKS. "Plant
IF SY-SUBRC = 0.
PERFORM PUSH_STACK USING WK_LVL WK_QTY. "Save parent attribute
PERFORM CHECK_BOM2 USING MAST-STLNR. "Check BOM2
ENDIF.
ENDFORM. "CHECK_BOM1
*&FORM CHECK_BOM2
text
-->p1 text
<--p2 text
FORM CHECK_BOM2 USING VALUE(FP_STLNR).
SELECT * FROM STPO
WHERE STLTY = P_STLTY AND "BOM category
STLNR = FP_STLNR. "BOM number
PERFORM POPOUT_WK. "Pop out to work area
WK_BOM-LEVEL = WK_LVL. "Current BOM level
WK_BOM-MATNR = STPO-IDNRK. "Material number
WK_BOM-POSTP = STPO-POSTP. "ITEM Category
WK_QTY = STPO-MENGE * WK_QTY. "For Stack
WK_BOM-MENGE = WK_QTY. "BOM Component qty
PERFORM CHECK_BOM3 USING STPO-STLTY STPO-STLNR STPO-STLKN.
PERFORM CHECK_BOM1 USING STPO-IDNRK P_WERKS.
ENDSELECT.
PERFORM POPOUT_STACK.
ENDFORM. "CHECK_BOM2
*&FORM CHECK_BOM3
text
-->p1 text
<--p2 text
FORM CHECK_BOM3 USING VALUE(FP_STLTY) VALUE(FP_STLNR) VALUE(FP_STLKN).
SELECT SINGLE * FROM STAS
WHERE STLTY = FP_STLTY "BOM category
AND STLNR = FP_STLNR "BOM number
AND STLKN = FP_STLKN "BOM item
AND DATUV <= P_STDAT "Valid from
AND LKENZ = ' ' . "Valid
IF SY-SUBRC = 0.
WK_BOM-DATUV = STAS-DATUV. "Valid from
ENDIF.
SELECT SINGLE * FROM STAS
WHERE STLTY = FP_STLTY "BOM category
AND STLNR = FP_STLNR "BOM number
AND STLKN = FP_STLKN "BOM item
AND DATUV > P_STDAT "Valid from
AND LKENZ = 'X' . "Invalid
IF SY-SUBRC = 0.
SELECT SINGLE * FROM STAS
WHERE STLTY = FP_STLTY "BOM category
AND STLNR = FP_STLNR "BOM number
AND STLKN = FP_STLKN "BOM item
AND DATUV > P_STDAT "Valid from
AND LKENZ = 'X' . "Invalid
IF SY-SUBRC = 0.
WK_BOM-DATUB = STAS-DATUV. "Valid to
APPEND WK_BOM TO TAB_BOM.
ENDIF.
ELSE.
WK_BOM-DATUB = '99991231'. "Manul input
APPEND WK_BOM TO TAB_BOM.
ENDIF.
ENDFORM. "CHECK_BOM3
*&FORM PUSH_STACK
text
-->p1 text
<--p2 text
FORM PUSH_STACK USING VALUE(FP_LVL) VALUE(FP_QTY).
WK_STACK-LEVEL = FP_LVL + 1.
WK_STACK-QUANT = FP_QTY.
APPEND WK_STACK TO TAB_STACK. "Push stack
SORT TAB_STACK BY LEVEL. "Sort table by level
ENDFORM. "PUSH_STACK
*&FORM PUSH_STACK
text
-->p1 text
<--p2 text
FORM POPOUT_STACK.
DESCRIBE TABLE TAB_STACK LINES WK_CNT.
IF WK_CNT > 0.
DELETE TAB_STACK INDEX WK_CNT. "Popout stack
SORT TAB_STACK BY LEVEL. "Sort table by level
ENDIF.
ENDFORM. "POPOUT_STACK
*&FORM POPOUT_WK
text
-->p1 text
<--p2 text
FORM POPOUT_WK.
DESCRIBE TABLE TAB_STACK LINES WK_CNT.
IF WK_CNT > 0.
READ TABLE TAB_STACK INTO WK_STACK INDEX WK_CNT. "Popout stack
IF SY-SUBRC = 0.
WK_LVL = WK_STACK-LEVEL. "Current Level
WK_QTY = WK_STACK-QUANT. "Parent Qty
ENDIF.
ENDIF.
ENDFORM. "POPOUT_WK
*&FORM DOWNLOAD_DATA
text
-->p1 text
<--p2 text
FORM DOWNLOAD_DATA.
DATA: L_RETURN TYPE SY-SUBRC.
PERFORM GUI_DOWNLOAD
TABLES
TAB_DATA
USING
P_PCFILE
'X'
CHANGING
L_RETURN.
IF L_RETURN <> 0.
MESSAGE S020.
ELSE.
MESSAGE S021.
ENDIF.
ENDFORM. " DOWNLOAD_DATA
*&FORM GET_VENDOR_DATA
text
-->p1 text
<--p2 text
FORM GET_VENDOR_DATA.
LOOP AT TAB_BOM INTO WK_BOM.
CLEAR DATAITEM.
SELECT * FROM MARC
WHERE WERKS = P_WERKS "Plant
AND MATNR = WK_BOM-MATNR. "Material
DATAITEM-EKGRP = MARC-EKGRP.
SELECT SINGLE * FROM MARA
WHERE MATNR = MARC-MATNR AND "Material number
MTART IN ('1211','1221').
IF SY-SUBRC = 0.
SELECT COUNT(*) FROM EORD
INTO (WK_CNT)
WHERE WERKS = P_WERKS AND "Plaint
MATNR = WK_BOM-MATNR AND "Material
VDATU <= P_STDAT AND "Valid-From
BDATU > P_STDAT. "Valid-To
IF WK_CNT > 1.
DATAITEM-MARK = '*'.
ELSEIF WK_CNT = 0.
MOVE-CORRESPONDING WK_BOM TO DATAITEM.
APPEND DATAITEM TO TAB_DATA.
ENDIF.
SELECT * FROM EORD
WHERE WERKS = P_WERKS AND "Plaint
MATNR = WK_BOM-MATNR AND "Material
VDATU <= P_STDAT AND "Valid-From
BDATU > P_STDAT. "Valid-To
MOVE-CORRESPONDING WK_BOM TO DATAITEM.
DATAITEM-LIFNR = EORD-LIFNR. "Vendor code
SELECT * FROM A018
WHERE LIFNR = EORD-LIFNR AND "Vendor code
MATNR = EORD-MATNR AND "Material
EKORG = EORD-EKORG AND "Purchase org
DATAB <= P_STDAT AND "Valid-from
DATBI > P_STDAT. "Valid-to
DATAITEM-DATAB = A018-DATAB. "Condition From
DATAITEM-DATBI = A018-DATBI. "Condition To
IF SY-SUBRC = 0.
SELECT * FROM KONP
WHERE KNUMH = A018-KNUMH AND "Cnd Number
KSCHL = A018-KSCHL AND "Cnd Type
KAPPL = A018-KAPPL. "Cnd Cat
DATAITEM-KBETR = KONP-KBETR. "Price
DATAITEM-KONWA = KONP-KONWA. "Currency
DATAITEM-KPEIN = KONP-KPEIN. "Price Unit
DATAITEM-KMEIN = KONP-KMEIN. "Unit of Material
APPEND DATAITEM TO TAB_DATA. "Append TAB_DATA
ENDSELECT.
ENDIF.
ENDSELECT.
ENDSELECT.
ELSE.
MOVE-CORRESPONDING WK_BOM TO DATAITEM.
APPEND DATAITEM TO TAB_DATA.
ENDIF.
ENDSELECT.
IF SY-SUBRC <> 0.
MOVE-CORRESPONDING WK_BOM TO DATAITEM.
APPEND DATAITEM TO TAB_DATA.
ENDIF.
ENDLOOP.
ENDFORM. "GET_DATA
*& Form SET_OUTPUT
text
--> p1 text
<-- p2 text
FORM SET_OUTPUT .
CLEAR WK_CNT.
LOOP AT TAB_DATA INTO DATAITEM.
WRITE: /001 '|', 002 DATAITEM-LEVEL, "Material Number
007 '|', 008 DATAITEM-MATNR, "Purchase Grp
026 '|', 027 DATAITEM-POSTP, "Item category
030 '|', 031 DATAITEM-MENGE, "BOM Component qty
044 '|', 045 DATAITEM-DATUV, "BOM valid from
055 '|', 056 DATAITEM-DATUB, "BOM valid to
066 '|', 067 DATAITEM-EKGRP, "Purchase Org
071 '|', 072 DATAITEM-LIFNR, "Vendor
082 '|', 083 DATAITEM-MARK, "Mark flag
085 '|', 086 DATAITEM-KBETR, "Price
101 '|', 102 DATAITEM-KONWA, "Currency
107 '|', 108 DATAITEM-KPEIN, "Unit Qty
115 '|', 116 DATAITEM-KMEIN, "Unit OM
120 '|', 121 DATAITEM-DATAB, "Cnd From
131 '|', 132 DATAITEM-DATBI, "Cnd To
142 '|'.
WK_CNT = WK_CNT + 1.
ENDLOOP.
ENDFORM. " SET_OUTPUTPrabhu Peram,
Thanks very much.
I want to show an idea of BOM explosion by constructing a stack.
BOM explosion uses first-root-searching and pushes the "root" material into stack.If the "root" has no left-child,pops out the "root" material and searchs the right-child....and completes the entire BOM explosion.
Message was edited by:
Mic chen
Message was edited by:
Mic chen -
CS11- BOM explosion with status inactive
When a BOM is marked as inactive( at the header level), the BOM explosion using CS11 is not possible. The systems says there is no effective BOM. However I can pull up the same using CS03 and drill down level by level.
Is this standard SAP behaviour? Are there any settings in Customizing that will make the explosion for inactive BOM's using CS11 possible?Alternative to select inactive BOM
BOM status = inactive in BOM header
In OS31
Create a selection ID = 09, selection priority = 1, BOM usage = 1
OS 30
Create a BOm application copy from PP01 let us say ZP01
In which enter the selection ID = 09, what you created before
Remove all the ticks of check BOM
Save
That is all.
In cs11, select the application as ZP01 and you will get the BOM explosion. -
Use of CS_BOM_EXPL_MAT_V2 fro BOM explosion on plant basis
hello ,
I dont have any documentation for this FM and need to use it for BOM explosion on plant basis plz let me knw how to use it?Try something like this :
* Tables "call CS_BOM_EXPL_MAT_V2 "
DATA: BEGIN OF t_stb OCCURS 0.
INCLUDE STRUCTURE stpox.
DATA: END OF t_stb.
DATA: BEGIN OF matcat OCCURS 50.
INCLUDE STRUCTURE cscmat.
DATA: END OF matcat.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
auskz = ' '
capid = 'PP01'
datuv = sy-datum
emeng = '1.000'
stlan = '1'
stlal = mast-stlal
mtnrv = matnr
mehrs = 'X'
mmory = '1'
stpst = '0'
werks = werks
IMPORTING
topmat = selpool
dstst = dstst_flg
TABLES
stb = stb
matcat = matcat
EXCEPTIONS
material_not_found = 4
no_plant_data = 8
no_bom_found = 12
no_suitable_bom_found = 16.
Hope this helps,
Erwan -
How to use the select option to get the multiple bom explosion
hi friends,
i have completed the bom exp using parameters to get one material
input,but i need to adopt select option to give from and to materials
i ll gives from and to materials with description and bom deails
i here gave the coding also, pl give me a suggestion how to adpot the select
optoins instead of parameters ,very urgent
REPORT PP_BOM_EXPLOSION.
tables :mara,marc,stpo.
TYPE-POOLS : SLIS.
*parameters: p_werks like t001w-werks obligatory.
SELECT-OPTIONS : p_matnr FOR mara-matnr obligatory.
**select-options : p_matnr for mara-matnr obligatory.
PARAMETERS : P_WERKS LIKE T001W-WERKS OBLIGATORY,
P_MATNR LIKE MARA-MATNR OBLIGATORY.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
matnr like mara-matnr,
maktl like makt-maktx,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data : topmat like cstmat.
data: w_topmat like cstmat.
DATA : IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
DATA : IT_EVENTCAT TYPE SLIS_T_EVENT.
DATA : WA_EVENTCAT_LN LIKE LINE OF IT_EVENTCAT.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: S_COL_POS TYPE I.
start-of-selection.
perform explode_assembly.
PERFORM BUILD_FIELDCATALOG.
PERFORM DATA_DISPLAY.
*end-of-selection.
*perform write_report.
*top-of-page.
*perform print_header.
*form print_header.
*write: /(18) 'Component'(h00),
*(40) 'Description'(h01),
*'Mat.Group'(h02),
*(18) 'Quantity'(h03).
*uline.
*endform.
*form write_report.
*write: / w_topmat-matnr under text-h00 color col_heading,
*w_topmat-maktx under text-h01 color col_heading.
*loop at it_comp.
*write: /
*it_comp-idnrk under text-h00,
*it_comp-ojtxp under text-h01,
*it_comp-matkl under text-h02,
*it_comp-menge unit it_comp-meins under text-h03,
*it_comp-meins.
*endloop.
*uline.
*endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
SELECT MATNR FROM MARA INTO CORRESPONDING FIELDS OF TABLE IT_MARA
WHERE MATNR IN P_MATNR.
Explode highest level:
*LOOP AT IT_MARA.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = P_MATNR
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
*write: / w_msg.
exit.
endif.
Don't process documents
delete it_stb where idnrk is initial.
Don't process valid from furure:
delete it_stb where datuv >= sy-datum.
Explode phantom assemblies up to last level
*do.
it_stb2[] = it_stb[].
*delete it_stb2 where dumps is initial.
*if it_stb2[] is initial.
*exit.
*endif.
*delete it_stb where not dumps is initial.
delete it_stb where VPRSV <> 'S' OR MMSTA = '61'.
loop at it_stb2.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
capid = 'PP01'
auskz = c_x
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = it_stb2-idnrk
werks = p_werks
tables
stb = it_stb3
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
*write: / w_msg.
else.
delete it_stb3 where idnrk is initial.
delete it_Stb3 where sobsl = 50.
loop at it_stb3 .
multiply it_stb3-menge by it_stb2-menge.
modify it_stb3 transporting menge.
endloop.
append lines of it_stb3 to it_stb.
endif.
*ENDLOOP.
endloop.
*enddo.
Build table of components collecting the same components from
all levels
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
CALL FUNCTION 'CONVERSION_EXIT_CUNIT_OUTPUT'
EXPORTING
INPUT = IT_STB-MEINS
LANGUAGE = SY-LANGU
IMPORTING
LONG_TEXT =
OUTPUT = IT_STB-MEINS
SHORT_TEXT =
EXCEPTIONS
UNIT_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
*READ TABLE IT_COMP INDEX 1.
*IF SY-SUBRC = 0.
IT_COMP-MATNR = w_topmat-matnr.
IT_COMP-MAKTL = w_topmat-maktx.
INSERT IT_COMP index 1.
*ENDIF.
ENDFORM.
FORM TO APPEND DATA INTO ALV FORM
FORM BUILD_FIELDCATALOG.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Component'.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Component'.
*loop at it_comp.
PERFORM BUILD_FIELDCAT USING 'MATNR' 'Material'.
PERFORM BUILD_FIELDCAT USING 'MAKTL' 'Material Description'.
PERFORM BUILD_FIELDCAT USING 'IDNRK' 'Component'.
PERFORM BUILD_FIELDCAT USING 'OJTXP' 'Description'.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Material Group'.
PERFORM BUILD_FIELDCAT USING 'MENGE' 'Quantity'.
PERFORM BUILD_FIELDCAT USING 'MEINS' 'Unit Of MEASUREMENT'.
*endloop.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM BUILD_FIELDCAT USING L_FIELDNAME LIKE DD03L-FIELDNAME S_TEXT LIKE DD03P-SCRTEXT_M.
CLEAR WA_FIELDCAT_LN.
ADD 1 TO S_COL_POS.
WA_FIELDCAT_LN-REF_TABNAME = 'IT_COMP'.
WA_FIELDCAT_LN-FIELDNAME = L_FIELDNAME.
WA_FIELDCAT_LN-SELTEXT_M = S_TEXT.
WA_FIELDCAT_LN-COL_POS = S_COL_POS.
WA_FIELDCAT_LN-QFIELDNAME = SPACE.
WA_FIELDCAT_LN-HOTSPOT = SPACE.
WA_FIELDCAT_LN-JUST = 'R'.
APPEND WA_FIELDCAT_LN TO IT_FIELDCAT.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM DATA_DISPLAY.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = TEXT-001
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = IT_FIELDCAT
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_COMP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
Thanks in advance
Regards
senthilkumar Dtables :mara,marc,stpo.
parameters: p_werks like t001w-werks obligatory.
*p_matnr like mara-matnr obligatory.
*select-options : p_matnr for mara-matnr obligatory.
select-options : P_matnr for mara-matnr.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data: w_topmat like cstmat.
data : begin of itab occurs 0,
matnr like mara-matnr,
end of itab.
*data : itab type table of mara with header line.
start-of-selection.
perform explode_assembly.
end-of-selection.
perform write_report.
top-of-page.
perform print_header.
form print_header.
write: /(18) 'Component'(h00),
(40) 'Description'(h01),
'Mat.Group'(h02),
(18) 'Quantity'(h03).
uline.
endform.
form write_report.
write: / w_topmat-matnr under text-h00 color col_heading,
w_topmat-maktx under text-h01 color col_heading.
loop at it_comp.
write: /
it_comp-idnrk under text-h00,
it_comp-ojtxp under text-h01,
it_comp-matkl under text-h02,
it_comp-menge unit it_comp-meins under text-h03,
it_comp-meins.
endloop.
uline.
endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
select matnr from mara into table itab where matnr between p_matnr-low and p_matnr-high.
loop at p_matnr.
itab-matnr = p_matnr-low.
append itab.
itab-matnr = p_matnr-high.
append itab.
clear itab.
endloop.
Explode highest level:
loop at itab.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = itab-matnr
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
write: / w_msg.
exit.
*else.
endif.
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
endloop.
endform.
i got the low and high from selectoption and then move it into itab.
then i pass itab-matnr into fm. using loop.
but i got only one output
but ineet to got from and to output.
give me a solution
Regards
ds -
What is the functionality of Bom explosion individual/collective in MRP 4 View
Hi Experts.Please give idea about what is the use of functionality of BOM explosion Individual/collective in MRP view 4.How this function will work in strategy 10 and 20.
thanks in advance.Hi,
This is a very generic question...If you explore in forum or net you will get lot of information...
This is normally used in make to order strategies like 20, 50 etc...
The individual/collective indicator in the material master record determines
whether a component is procured for a special customer requirement in the
individual segment.
The indicator "1" for individual requirements means that the material is being
specially manufactured or procured for a sales order. A special individual segment
is created for each requirement. An individual requirement is only created if the
higher-level material does not create a collective requirement.
The indicator "2" for collective requirements means that the material is produced
or procured for various requirements. You can find these requirements in the net
requirements segment.
The indicator "blank" means that the component is to be planned in the same way
as the higher-level assembly.
In the above example, two individual segments are created for the shaft for sales
orders A and B.
Thanks
Kumar -
Adding new items in ME21N using USEREXIT/BADI with BOM explosion
I have following business scenario. There is purchase requisition consisting just one material. In ME21N we are creating new purchase order. This purchase order needs to consist that item (we drag&drop this item from purchase requisition).
The problem is, that this item is in fact BOM, so we would like to explode it and select just some entries from them basing on some Z* configuration and we can't use standard BOM explosion from ME21N.
The idea to solve that issue is following:
1. Explode there BOM for material;
2. Filter out not needed items from that explosion using Z-config table;
3. Copy filtered items using USER-EXIT / BADI , ENHANCEMENT-SPOT into purchase order items.
The best, if this USER-EXIT / BADI, ENHANCEMENT-SPOT will be used only when drag&drop purchase requisition item into new purchase order.
The point is that I'm not able to find out such USER-EXIT, BADI or ENHANCEMENT-SPOT.
P.S. There is for instance exit "MM06E007 Change document for requisitions upon conversion into PO", but interface of that exit completely doesn't fit my needs.
Any ideas?Hello Tomasz Suchanek ,
There is no BADI/ Enhancement Spots / User Exits that you can use for this requirement.
You are trying to change the SAP standard Functionality.
You need to contact SAP for consulting .
Thanks,
Greetson -
BOM Explosion (CS_BOM_EXPL_MAT_V2) - inactive alternative BOM
Hi,
I need to display the alternative BOM entered in the selection screen even if the entered alternative is inactive. i.e. status is inactive. i have used FM - CS_BOM_EXPL_MAT_V2.
Kindly advise.
Regards.Using Function module CS_BOM_EXPL_MAT_V2
As already has been said, the RNDKZ field is used for rounding. If you fill with '1', it will never round.
Example (the problem I had):
Material A consist of et al. 0.008 piece Material AA.
Material AA consist of 1.0 pice Material AAA,
of 7.0 piece Material AAB,
of 6.0 piece Material AAC,
of 12.0 piece Material AAD.
CASE 1: You fill RNDKZ field with '1':
You get the correct result which is:
You need for producing 1 piece of Material A
0.008 piece Material AA,
0.008 * 1 = 0.008 piece of Material AAA,
0.008 * 7.0 = 0,056 piece of Material AAB,
0.008 * 6.0 = 0,048 piece of Material AAC.
0.008 * 12.0 = 0,096 piece of Material AAD.
CASE 2: You let RNDKZ field blank.
In your user profile for BOM field "Round of" is set to blank (table field TCSPR-AMEKZ, TA S_ALR_87004496).
You get following result (which is wrong)
You need for producing 1 piece of Material A
1 piece Material AA,
1.0 *1.0 = 1.0 piece of Material AAA,
1.0 * 7.0 = 7.0 piece of Material AAB,
1.0 * 6.0 = 6.0 piece of Material AAC.
1.0 * 12.0 = 12.0 piece of Material AAD.
The number of decimals is seen depends as well from how many decimals is set for unit of measurement. In this case the number of decimals for "piece" was set to zero. (TA CUNI).
If you let the field RNDKZ field blank, the user profile field "Round of" (table field TCSPR-AMEKZ) is used. -
Comp. Backflush using Comp. Scrap(No BOM explosion(manual comp. entry))
Hi Friends,
*Component Backflush + MFBF Functionality:*
Go to MFBF --> Select the radio button COMPONENT BACKFLUSH --> and click on
COMPONENT SCRAP (application toolbar).
Now select the radio button NO BOM EXPLOSION(manual comp. entry).
Enter the Material Number and Production Version.
Now click on PROCESS COMPONENT LIST (application toolbar).
Enter Material, Quantity, UOM, Storage Location, Reason Code and press ENTER.
By default the movement type will be '551'.
Now when you click on SAVE button on the top. It will give you a material
document number.
I have created a new FM according to the standard component backflush functionality and called the BAPI BAPI_REPMANCONF1_CREATE_MTS in my Z FM. But the functionality of the standard BAPI is not giving expected results.
I would appreciate if someone who had gone thru the same situaton could help me. I have done my research in different ways. But ended up finding none. Is there any other BAPI or procedure to achieve the above scenario.
Thanks.Hi Keshav,
Thanks for getting back to me.
Below is how I populated the data.
"I am not populating Backflush quantity and UOM because according to my
"standard MFBF functionality I have choose NO BOM EXPLOSION(manual comp. entry)
FLAGS-BCKFLTYPE = '12'.
FLAGS-COMPONENTS_TYPE = '1'.
GENDATA-POSTDATE = SY-DATUM.
GENDATA-DOCDATE = SY-DATUM.
GENDATA-MATERIALNR = MATERIAL.
GENDATA-PRODPLANT = PLANT.
GENDATA-PRODVERSION = VERSION.
"Z_IMPORT_TABLES is the custom structure which I have declared at TABLES in FM
"I_GOODS is of type BAPI2017_GM_ITEM_CREATE
LOOP AT Z_IMPORT_TABLES.
WA_GOODS-MATERIAL = Z_IMPORT_TABLES-MATERIAL.
WA_GOODS-PLANT = Z_IMPORT_TABLES-PLANT.
WA_GOODS-STGE_LOC = Z_IMPORT_TABLES-STGE_LOC.
WA_GOODS-MOVE_TYPE = Z_IMPORT_TABLES-MOVE_TYPE.
WA_GOODS-ENTRY_QNT = Z_IMPORT_TABLES-ENTRY_QNT.
WA_GOODS-ENTRY_UOM = Z_IMPORT_TABLES-ENTRY_UOM.
WA_GOODS-MOVE_REAS = Z_IMPORT_TABLES-MOVE_REAS.
APPEND WA_GOODS TO I_GOODS.
ENDLOOP.
CALL FUNCTION 'BAPI_REPMANCONF1_CREATE_MTS'
EXPORTING
BFLUSHFLAGS = FLAGS
BFLUSHDATAGEN = GENDATA
IMPORTING
CONFIRMATION = CONFIRMATION
RETURN = RETURN ---------> error in this parameter
TABLES
GOODSMOVEMENTS = I_GOODS.
When I execute this in debug mode, it is giving me an error in my RETURN parameter asking me to enter the backflush quantity and UOM which doesn't suits my scenario.
Appreciate if you could let me know where I am doing wrong in my code and guide me in a better way to achieve this.
Thanks. -
Update Equipment BOM using Function module (very urgent)
Hi All,
I am an ABAPER and trying to update equipemnt BOM.
I want to update equipment BOM using a function module. I am currently using 'CSAI_BOM_MAINTAIN' function module. But i am not able to update the Equipment BOM. After function call the sy-subrc value is 0, even though the BOM is not updated.
Please help its very urgent.
Kind Regards,
Sharat.Hi Sharat,
I am facing the same problem. Could you please let me know what might be the reason.
Plz mail me at [email protected]
Plz update this section once u have mailed the answer.
Thanks a lot in advance.
Regards,
Himanshu
Maybe you are looking for
-
Make Non-editable Column in Table Control of ME21N and ME22N
Hi Experts, I was trying to look for a solution to make the columns for field MEPO1320-SLFDT(Stat Deliv. Date), MEPO1320-EEIND (Deliv. Date) and MEPO1211-NETPR (Net Price) from transaction ME21N and ME22N to be non-editable ONLY when Qty Received (ME
-
Multiple Online Numbers - Only want one forwarded
Hey there, am hoping someone can help with my query re multiple online numbers. I have one Skype account, and multiple online numbers. One number is for a 'home' number, the other is for a 'business' number. I was hoping to set up call forwarding suc
-
GDM update: directory permissions differ on /var/log/gdm/
Hello, Running Arch 64Bits kernel 3.9.9-1 with systemd and i got the following warning during a gdm update today: (1/6) upgrading libgdm [######################] 100% (2/6) upgrading gdm [######################] 100% warning: directory permissions di
-
Product update/upgrade policy by Adobe
Adobe is selling software with less validity than a yogurth: I bought the upgrade of Elements suite to version 8 in August this year and One and a half month later this product has expired because Adobe released version 9. Any decent company would pr
-
Clusterwide exception: Failed to start dependent interface ''caf/eu/gp/api'
Hello ! We are working with SAP Netweaver 2004s SP11 with a local repository. We are trying to deploy a web dynpro project using the guided procedures api. But we have a problem at deploy time : Finished with warnings: development component ... :Caug