Update Equipment BOM using Function module (very urgent)

Hi All,
I am an ABAPER and trying to update equipemnt BOM.
I want to update equipment BOM using a function module. I am currently using 'CSAI_BOM_MAINTAIN' function module. But i am not able to update the Equipment BOM. After function call the sy-subrc value is 0, even though the BOM is not updated.
Please help its very urgent.
Kind Regards,
Sharat.

Hi Sharat,
I am facing the same problem. Could you please let me know what might be the reason.
Plz mail me at [email protected]
Plz update this section once u have mailed the answer.
Thanks a lot in advance.
Regards,
Himanshu

Similar Messages

Updating liveCache Data using Function Module or ABAP program.

Is it possible to update APO Live Cache using Function Module or ABAP Program.
Will the aggregation/disaggreagation remain the same if data is modified using Function Module or ABAP Program.
Regards,
Vikas

ello Vikas,
-> Please click at
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
& read about 'SAP liveCache'.
As you know objects stored in liveCache in the class containers can be accessed
and manipulated only via LCA routines which are methods of LCA objects.
The registration of the LCA routines is done automatically when
the liveCache is started by the LC10, check the lcinit.log file.
The shared procedures in the LiveCache are written in C++ and shipped
to the customers as binary shared libraries(LCA-Routines) < LCA build >
together with the LiveCache. The original C++ source code of the
libraries is not generally available to the customers.
The LCA routines could be called via "/SAPAPO/OM*" ABAP functions.
-> For SAP liveCache documentation in English:
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
< -> Database Administration in CCMS: SAP liveCache -> liveCache Assistant ->
liveCache: Monitoring -> Problem Analysis-> DB Procedures >
In transaction LC10 for the LCA connection choose liveCache:Monitoring
then go to Problem Analysis -> DB Procedures=>
The system displays an overview of all database procedures loaded into
liveCache, their input and output parameters, and other details.
-> Tr. /n/SAPAPO/OM16 ( in further releases /n/sapapo/om19 ) is provided by
SAP to get information about data stored in the LiveCache. If you would
like to get your own views, you should write a special report in ABAP using
"/SAPAPO/OM"-development class functionality.
-> There are standard function modules in ABAP available to extract/change data from/in liveCache.
-> In addition to the given information => find more information at:
SCM 4.0 -> http://help.sap.com/saphelp_scm40/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 4.1 ->
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 5.0 ->
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
You can go to the Advanced Planner and Optimizer documentation from the above links < Supply Network Planning Run -> Aggregated Planning -> SNP Disaggregation Or SNP aggregation . >.
If you still have open questions on the posted topic =>
Could you please give more information on your application scenario.
Thank you and best regards, Natalia Khlopina

How to use function module to update data

Hello ,
Can any body have idea how we can use function module SAVE_TEXT to update the master recipe header and operation long text.
I want to use this functional module to update the master recipe long text
step by step procedure is highly appreciated
thanks & regards
siddhasrth

Hi
SAVE_TEXT
SAVE_TEXT writes a text module back to the text file or the text memory, depending on the storage mode of the corresponding text object.
You can use this module either to change existing texts or to create new texts. If you know for sure that the text is new, use the parameter INSERT to indicate this. The system then does not have to read the text first, which improves the performance of the function module.
If the lines table passed with the function module is empty, the system deletes the text from the text file.
Function call:
CALL FUNCTION 'SAVE_TEXT'
EXPORTING CLIENT = SY-MANDT
HEADER = ?...
INSERT = SPACE
SAVEMODE_DIRECT = SPACE
OWNER_SPECIFIED = SPACE
IMPORTING FUNCTION =
NEWHEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
check thi sample code
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = t_header
SAVEMODE_DIRECT = 'X'
* OWNER_SPECIFIED = ' '
* LOCAL_CAT = ' '
* IMPORTING
* FUNCTION =
* NEWHEADER =
TABLES
LINES = t_long
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5
Reward all helpfull answers
Regards
Pavan

Batch status updating using function module BAPI_BATCH_SAVE_REPLICA

Hi,
I want to change batch status after creating the outbound delivery through inbound idoc, i was able to create delivery , but after creation, i should update the batch status using function module BAPI_BATCH_SAVE_REPLICA, but i was unable to execute this function module correctly,
Can any one provide details like what are minimum things that are required to update the batch status using this function module.
In my system batches are defined at plant level.
Please let me know the solution if any one knows this.
With regards.
P.Prasanth.

Look at BAPI_INCOMINGINVOICE_POST
Rob

Code For Delta Extraction Using Function Module

Dear Experts,
I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
[email protected]
Best Regards,
SGK.

Dear KJ,
Thank for your response. I saw the code that you sent, you have used some ztables like ZSC_DELTA_IP, ZSC_SAFETY_DELTA, ZSC_SET_EXT_TIME
What are the fields that you have created in these tables , what is use of these tables, can you send the fields that you have used in these tables.
Thanks & Regards,
SGK

Delta Extraction Using Function Module ( Customization )

Dear Experts,
I want a sample code for Delta Extraction using Function Module ( If it is customized already working code very helpful ), I have already created Function Module but Full update is happening. If I give delta update again it is retrieving all records. It is very urgent, if you have please send me to the following mail ID.
[email protected]
Best Regards,
SGK.

Hi SGK,
I've done this for a delta based on a timestamp and it's actually pretty easy. The basic steps are:
1) Create an extract structure in SE11. Make sure the structure has a date or timestamp field in it that you can use for delta. You'll need to include the field twice if you also want to extract it to BW/BI since once it's chosen as the delta field then it will be hidden in the interface.
2) Create the extractor function module in SE37. You can use RSAX_BIW_GET_DATA_SIMPLE as a template. Make sure your logic restricts the data it retrieves according to the selections that are passed in I_T_SELECT, including restrictions on the delta field.
3) Create a generic DataSource in RSO2. Click Extraction by FM then fill in your extract structure and function module. Click Generic Delta and pick your delta field and the appropriate radio button (time stamp or calendar day). If your delta field is a timestamp field then be sure to set the upper and lower safety limits to -86400 and 86400 respectively. This might not be necessary on your version of SAPI but on mine there is a bug where it doesn't translate between system time and UTC (GMT) correctly so this was necessary.
You don't need to program any special delta handling logic in your function module as long as you restrict the data you retrieve based on the delta field (I_T_SELECT). This is because the SAPI takes care of catching the init, delta and repeat requests, translating them to the appropriate delta field values, and then passing them to your function module as if it was a full extraction for a specific date or timestamp range.
Hope this helps!
Jason

Error in Data selection in R/3 Generic Extraction Using function Modules

Hi Friends,
I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
data selection successfully started
Data selection successfully ended
All Data packets completed.
are showing in red.
after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
it is giving this message wir no RSM 78.
Please let me know it

Hi Jerry,
Thanks for the immediate replay
But here in my source system job is getting terminated.
this is the status of job in Job logs.
the job is running till this step not going ahead.
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records
Result of customer enhancement: 157 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records
Result of customer enhancement: 157 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
pl. update me if any idea.

How to create Billing Plan in sales order using Function module /BAPI

hi,
How to create Billing Plan in sales order using Function module /BAPI
i hv check few FM such
BILLING_SCHEDULE_READ
BILLING_SCHEDULE_GET_NUMBER
BILLING_SCHEDULE_SAVE
But unable to create billing plan for a sales order.....any other method to create???

Hi,
Use this link.
Create sales order with billing plan via LSMW and BAPI BUS2032
BAPI or Function to update Billing Plan in Sales Order Items
Hope this will help you.
Regards,
Vijay

Please send me some sample codes of ALVS using function modules only

Hi,
i am new to alvs
Please send me some sample codes of alvs using function modules only.
My mail id is [email protected]
Thanks & regards,
hari priya

hI
http://www.sapdev.co.uk/reporting/reportinghome.htm SPECIAL FOR ALL ALV PROGRAMS WITH EXAMPLE CODES
Check the below links :
http://www.sap-img.com/abap/sample-programs-on-alv-grid.htm
http://www.sap-img.com/abap-function.htm
http://www.sap-basis-abap.com/sapab034.htm
http://www.erpgenie.com/abap/example_code.htm
These all are very simple ALV programs ,good luck
Reward if usefull

Generick Extarction using Function Module.

Hi,
Give me the steps Generic Extraction using function module.Thanks for your help.
Thanks & Regards,
Suresh.

Hi,
Check the below threads:
Using function module as the generic extractor
Generic Delta Update using Function Module
Document regarding R/3 extractors using function module/user exits
Generic extractors using FM
Also refer the document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
Reg
Pra

Sending email and alert notifcation using function module

Hi All,
I am trying to send email and alert notification messages using function modules in CRM. I am unable to send mail using 'SO_DOCUMENT_SEND_API1'. Getting a short dump message "dictionary mismatch". If anyone knows any FM which can be used for sending mails, please let me know. I also want to send alert messages using some FM. Please let me know any FM in this case as well.
All help appreciated. This is urgent and please get back to me soon.
Thanks
Deno

Hi Ranjit,
Thanks a lot for the reply. I already tried these FMs and getting the error message
Trigger Location of Runtime Error
    Program                                 SAPLBUPA_INTERFACE_TDTRANS
    Include                                 LBUPA_INTERFACE_TDTRANSTOP
    Row                                     4
I dont know the reason behind the error. The SO_document_send FM is used inside all these FMs. So It wont work.
Thanks
Deno

Why we use function module u0091SSF_FUNCTION_MODULE_NAMEu0092 in smartform driver p

Why we use function module SSF_FUNCTION_MODULE_NAME in smartform driver program?

Forum Search
Use the form below to search the forum content. You can choose to search all content or restrict it to certain forums or dates. Also, you can filter the results by a username or user ID.
Search Forum Content
Search Terms:        Search Tips
Category or Forum:
Date Range:
Results Per Page:
Welcome, Clemens Li      Help
Your Control Panel      Your Control Panel
Your Reward Points      Your Reward Points
Your Questions      Your Questions
Search Results » Messages: 271 - Search Terms: why we require form interface section in smartform?      Sort by:
Pages: 19 1 2 3 4 5 6 7 8 9 10
   1. Why we require FORM INTERFACE section in smartform?
      Posted on: Sep 12, 2007 10:47 PM, by user: p d -- Relevance: 100% -- Show all results within this thread
      Why we require FORM INTERFACE section in smartform?
   2. What is the driver program & why we require driver program?
      Posted on: Sep 12, 2007 10:48 PM, by user: p d -- Relevance: 17% -- Show all results within this thread
      What is the driver program & why we require driver program?
   3. Re: form interface in smartform
      Posted on: Feb 21, 2006 11:51 AM, by user: Hasmath -- Relevance: 14% -- Show all results within this thread
      hard-coded driver program in the tables section. for this u have to define the same structure in the form interface of the smartforms and can use the same structure for sending the data to the smartform ...
   4. Smartform: Form Interface
      Posted on: Aug 24, 2007 2:34 PM, by user: vivek pandey -- Relevance: 13% -- Show all results within this thread
      Hi, If we want to use a workarea/internaltable in the form interface of Smartform of a user defined structure ...
   5. Form Interface in Smartforms ?
      Posted on: Oct 27, 2006 5:32 PM, by user: SAP BEE -- Relevance: 12% -- Show all results within this thread
      ztest ) on the table and print the value : &gs_vbap-total&. I activate the form ...it is fine ...as well as program !! Now , when i do the print preview of the form , It gives an error : Reference ...
   6. SmartForms form interface - tables
      Posted on: May 18, 2005 2:44 PM, by user: Diliip Gupchup -- Relevance: 12% -- Show all results within this thread
      Hi All, In smart forms how to declare our internal table in form interface? By using types in global itried but it is ...
   7. Calling thru Form Interface of Smartforms
      Posted on: May 4, 2007 3:03 AM, by user: Subhasish Ganguly -- Relevance: 11% -- Show all results within this thread
      In a Smartforms, how can I call a internal table thru 'Form interface' which has been declared in the driver program? ...
   8. Form Interface in SMARTFORMS
      Posted on: Jun 1, 2006 10:56 AM, by user: Rams V -- Relevance: 11% -- Show all results within this thread
      Hi There, Is it mandatory to create a custom structure in ABAP dictionary to use it in SMARTFORM interface? regards, Rams. ...
   9. Line Types and Table types & Smartform form interface
      Posted on: Sep 21, 2005 3:38 PM, by user: Aadarsh K -- Relevance: 10% -- Show all results within this thread
      types ?? 2. In smartforms form interface, in the importing parameter, can tables be passed ?? [we use tables parameter generally, but even if passed in export parameter, no error is being given and ...
10. regarding complex section in smartforms
      Posted on: Aug 25, 2007 7:49 AM, by user: ravi -- Relevance: 10% -- Show all results within this thread
      learning smartforms on 5.0ecc and i got the documents which is showing the complex section but in 5.0 ecc we have no complex section cud u plz let me know where sud i add the contents of the complex section ...
11. why is it that some function module require an endselect
      Posted on: Aug 8, 2007 3:40 PM, by user: mathias Mbizvo -- Relevance: 10% -- Show all results within this thread
      why is it that some function module require an endselect and some can work without the endselect...
12. Complex section in smartforms
      Posted on: Aug 11, 2007 7:29 PM, by user: narendra veduru -- Relevance: 9% -- Show all results within this thread
      Hi I am practicing smartforms in 4.7. I have a tutorial based on 4.6c and they have complex section in the nodes. How do i ...
13. form interface using currency fields - smartforms urgent!!!!
      Posted on: Aug 17, 2005 1:11 AM, by user: skmysore -- Relevance: 9% -- Show all results within this thread
      called function module. what is the error here? How can i correct this to display data into the form? Please help me it is urgent!!! Thanks Santhosh ...
14. why do we activate a program
      Posted on: Feb 28, 2007 5:50 AM, by user: Rose -- Relevance: 8% -- Show all results within this thread
      hi, why do we activate a program or tables in sap.Though there is a option known as save why do we activate? ...
15. Re: what is form interface and global definitions
      Posted on: Jun 5, 2007 8:25 AM, by user: Venkatesh -- Relevance: 8% -- Show all results within this thread
      Function modules. and global definitions are the variable or tables declared with in the smartform. we can pass values to the smartform from the driver programme through the form interface. if helpful ...
Pages: 19 [ 1 2 3 4 5 6 7 8 9 10 | Next

Using function module PT_ARQ_REQUEST_EXECUTE to approve leave requests

I'm building a screen to approve or reject multiple leave requests using function module PT_ARQ_REQUEST_EXECUTE as the SAP standard program RPTARQAPP does, and this seems to be working fine. However, I also need to include a note from the approver which is a bit of long text that ends up in table PTREQ_NOTICE. This is something that RPTARQAPP does not do.
I cannot find any way of passing this text into PT_ARQ_REQUEST_EXECUTE. The only way I can find of doing this is to call FM PT_ARQ_REQUEST_PREPARE first (command = PREPARE_APPROVE), update the CURR_NOTICE field it sends back in structure EX_REQUEST, then pass the changed EX_REQUEST structure into FM PT_ARQ_REQUEST_CHECK (command = CHECK_APPROVE) and then call PT_ARQ_REQUEST_EXECUTE (command = EXECUTE_APPROVE). This works fine for a single leave request, but when I try to use this process to approve two leave requests the CHECK FM gives me an error on the second record with a message referring to a time conflict with the first message even though the dates on each are not the same.
I've searched and there are a few posts about these FMs, but I still can't fix this problem. Has anyone ever dealt with this situation before and found a solution?

I've replaced the call to FM PT_ARQ_REQUEST_CHECK with the following and it seems to work pretty well. Though of course it will need a lot more testing.
STATICS:
    request TYPE REF TO if_pt_req_request.
CALL METHOD ca_pt_req_header=>agent->get_request
      EXPORTING
        im_request_id     = p_im_request_id
      IMPORTING
        ex_request        = request
      EXCEPTIONS
        request_not_found = 1.
CALL METHOD request->set_notice
      EXPORTING
        IM_NOTICE               = p_approver_text.

Delta Problem while extracting the data by using function module

Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
Venkat

Hi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya

Adding a color to row of a alv grid using function modules

Can anybody clearly explains me how to add a color to a row to an alv grid using function module reuse_alv_grid_display.
thanks in advance
regards
anil.

hi,
chk this ample pgm
report zxyz_0004
 no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
 matnr type mara-matnr,
 mtart type mara-mtart,
 maktx type makt-maktx,
 color_line(4) type c,
 tcolor type slis_t_specialcol_alv, "cell
 end of imara.
data: xcolor type slis_specialcol_alv.
start-of-selection.
perform get_data.
perform write_report.
Get_Data
form get_data.
imara-matnr = 'ABC'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for ABC'.
append imara.
imara-matnr = 'DEF'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for DEF'.
append imara.
imara-matnr = 'GHI'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for GHI'.
append imara.
loop at imara.
 if sy-tabix = 1.
 imara-color_line = 'C410'. " color line
 endif.
 if sy-tabix = 2. "color CELL
 clear xcolor.
 xcolor-fieldname = 'MTART'.
 xcolor-color-col = '3'.
 xcolor-color-int = '1'. "Intensified on/off
 xcolor-color-inv = '0'.
 append xcolor to imara-tcolor.
 endif.
 modify imara.
endloop.
endform.
WRITE_REPORT
form write_report.
data: layout type slis_layout_alv.
layout-coltab_fieldname = 'TCOLOR'.
layout-info_fieldname = 'COLOR_LINE'.
perform build_field_catalog.
CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 is_layout = layout
 it_fieldcat = fieldcat
 tables
 t_outtab = imara.
endform.
BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '18'.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Type'.
fc_tmp-fieldname = 'MTART'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '4'.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-emphasize = 'C610'. " color column
append fc_tmp to fieldcat.
endform.
anil , pls chk this link also.
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm
very hlpful.
rgds
anver
pls mark points if ur issue solved
Message was edited by: Anversha s
Message was edited by: Anversha s

Update Equipment BOM using Function module (very urgent)

Similar Messages

Maybe you are looking for