BOM for the materials in plant

Hi,
What is the tcode to find the materials i have in plant is having BOM?
Rex

Dear,
1)Possibly, you can query the table" MAST" for the list of materials with SE16.
2)If you want to find details of individual materials:
Use transaction codes:
CS03 - Material BOM here you will get list of material having BOM by pressing F4.
3) I don't think there is any such transaction available. (But you can get the list of material who has a BOM from MM02 (F4 options). To get the required list you need to develop a small customized report. The logic may be like: Input plant code on input screen. Let system to check all the available materials in the MARC table for given plant. This list of materials(MATNR) to be supplied to MAST table and those materials which doesn't have corresponding STLNR (BOM No.) can be outputted as the desired list. I hope this will help in resolving the issue. Please revert back in case of any further clarification.
4)There is one unique way is there which helps you to find our fert / Halb code without BOM.
Go to MD21 and select low level code 999 and execute.
Hope it will help you.
Regards,
R.Brahmankar

Similar Messages

  • The value  is not allowed for the field Cross-plant CM

    Hello All
    When i copy material in refernce to existin gone. I am getting this message
    "The value  is not allowed for the field Cross-plant CM"
    I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
    Any help will be good...Thanks in advance...

    Hi,
    Please check the check box in front of the field config material is checked?
    If so then this material is configurable material
    A material that can have different variants.
    For example, a car can have different paint, trim, and engines.
    Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
    Please check
    BR
    Diwakar

  • BOM for the Rawmaterial

    Dear all,
    I need your help to build a BOM for the Rawmaterial, my scenario is:
    I have a FERT material as "A'. Which has components B,C,D (B and C are Rawmaterials which is procurred externally and D is a semi-finished product).
    I have to maintain BOM for the component 'B' and having components X,Y and Z.   (Here the cost of X,Y and Z should not be rolled to the material 'B', so am not maintaining the costing relevancy indicators for the X,Yand Z materials).
    Now i have to sent the component 'X' for external processing and bring it back as Component 'D'.
    Please let me know how to process the above scenario.
    Thanks & Regards
    Dhanasekar

    Hi,
    As per your scenario you are manufacturing FERT A with compmonents as B,C & D. For component B you want to create bom with externally procured materials X, Y & Z.
    X is sent for externally processing & bring back as semifinshed product D.
    So you can map this scenario as,
    1. Create BOM for HALB material D with component as X (with the material master setting as SPK- 30 subcontacting to get it done from outside)
    2. Create BOM for FERT material A with the components B, C & D.
    3. You don't need to maintain BOM for ROH materials B & C as they are the externally procured materials.
    With this scenario when the BOM explosion is done for material A, then dependent requirements will be created for components B, C & D. Purchase requisition will be created for components B & C, and then they will be converted to purchase order. For component D planned orders are created & then purchase requisitions will be created for material X.
    Hope this resolve your issue, reward points if helpful.
    Regards,
    Avinash.

  • How to create  an alternative bom for the same product

    Hi expert,
       I want to know how to create an alternative bom for the same product. Can i use the different bom usage to create or use the same bom usage? In addition, how can i use the production version to link the alternative bom for the same product?
    Please help me solve the problem.
    Thanks in advance for any assistance.
    George shi

    HI
    you can go with t-code CS01
    if you have the BOM already and you want to create the alternative BOM then just goto create BOM
    and enter the material and plant and uasge system will auto matically prapose the next numner ie, if you have Alt BOM1
    then next system will prappose 2.
    then you can enter the components as per you requirement
    if you go to different BOM usage then sytem will not go for alternative BOM it gives again alt bom 1.
    prodcution version you need to craet from mateial master
    each version you can go woith alternative BOMS
    Version 1 will have alt BOM1
    Version 2 can haev ALT BOM2
    -ashok

  • Issue in Exporting the Sales Price List and Purchase Price List for the Materials from SAP Business ByDesign (SAP Cloud)

    Hello Everyone,
    I would like to have a discussion on the issues, which I am facing at the time of Exporting the Sales Price List and Purchase Price List for the Materials from
    SAP Business ByDesign (SAP Cloud).
    (1). Sales Price List :
    We have maintained Customer Group Specific Sales Price List for the Materials in the following Location.
    Location :         Product and Service Portfolio Work Center > Pricing > Price Lists > Customer Group Specific Price List (Type of Price List)
    Target :             We want to export the entire records in some reports or excel sheet.
    Records :          Number of Materials in the Customer Group Specific Price List is more than 2,00,000
    Issues : 
                                         (A). In the SAP Business ByDesign Screen we can filter by number of records but we can export till  50,000 records.
                                                 And if we are trying to export records more than that limit, then it throws "HTTP 500 Internal Server Error".
                                         (B). We could not find any SAP standard reports in Product and Service Portfolio and/or Business Analytics Work Center
                                                for getting the entire record set of the Sales Price List, so that we can have the entire set of records together.
    Searching For :
                                          (A). Is there any SAP reports or data source available for getting the entire Sales Price List records?
                                          (B). Can we have any other filter conditions for exporting the Sales Price List records in a single shot or module wise?
    (2). Purchase Price List :
    We have maintained the Purchase Price List for the Materials in the following Location.
    Location :           Product Portfolio Work Center > List Prices > Active List Prices (Type of Price List)
    Target :               We want to export the entire records in some reports or excel sheet.
    Records :            Number of Materials in the Purchase Price List is more than 4,00,000.
    Issues :  
                                           (A). In the SAP Business ByDesign Screen we can not see more than 10,000 records and the actual number of
                                                   records are more than 4,00,000. We could able to download the records till 10,000 but that is not sufficient.
                                                   We want to export the entire records in an excel sheet.
                                           (B). We could not find any SAP standard reports in Product Portfolio and/or Business Analytics Work Center for
                                                  getting the entire record set of the Purchase Price List, so that we can have the entire set of records together.
    Searching For :
                                           (A). Is there any SAP reports or data source available for getting the entire Purchase Price List records?
                                           (B). Can we have any other filter conditions for exporting the Purchase Price List records in a single shot or module wise?
    Please go through the attached screen shots for the references and more clarity on the issues.
    I am waiting for the valuable responses.
    Thanks and regards,
    Susanta Dey Sarkar
    Bangalore, India
    19th March, 2015

    Dear Michael,
    The number of records :
    2 Million (Approximately) is for the Sales Price List Material Price Data
    4 Million (Approximately) is for the Purchase Price List Material Price Data.
    Regards,
    Susanta Dey Sarkar

  • Automatic creation of PR from sales order (SO) for the materials compement

    Hi
    I would like to create un PR from a sales order , but only for the material component (defined on Tcod CS01)
    I already know how to create un automatic PR from SO By using the TAS post type
    But the problem is that this method create only a PR for the material in SO him self and not for his component "what I really want"
    I search every where in VOV6  and VOV7 but I didn't find what Iu2019m looking for
    Thanks in advance For your advices and help
    S.Ghafai

    hello
    did you have any idea about this problem?
    I want to create automatically an PR for the Component of the Production BOM on saving my sales order
    exp :
    Material component = 1010 Qte 2  and 1011 Qte 25
    Sales material = 10XX Qte 1
    In my PR created the materials must be 1010 Qte 2 & 1011 Qte 25
    I hope my question is more clear now
    thanks in advanve

  • How to map Product Group for the Materials in BW.

    Hi All,
    We have an requirement for one of the report called as Progress validation Report.
    We have to craete thsi repotr which would pulll out Inventory value, Production Plan value, Total Lates, Current week deliveries and WIP for a quarter.
    Cube whihc provides details about production plan has data by Material, plant and product group wise.
    But rest of the cube from which we extract the key figures does not have data by Product grop wise.
    Product group is been picked from PGMI table in R/3.
    How I can related the materials  which are in other cube to the respective Product group.
    Material and the relevant prdoct group data doesnot flows in BW.
    There is even a scenario where ahve seen a material falls under 2 product groups..
    PLease guide as how i can realted already existing materials in the Cube to the product group.
    Points will be assigned
    Thanks & Regards
    Vaishali Patil

    Hi,
    Product Group is master data for material master. It is part of Matreial Clssification data in R/3.
    Please check if you are having the same already loaded as attribute of Material master. I guess it will be there, if it s not there then you should try to load the same in material master object which you are using in all the cubes.
    If the maintinenece in master data is nopt possible then you got to populate the same in cube.
    There will be a combination of keys (materail/plant/prduct family etc.. ( for which Product group will be unique). then load product with the help of these key combinations in all the cubes via update routine.
    There is one more way to have this but which is performance intensive.
    You may create one master data object called Product Group and keep material number as attribute (with compunding all other key fileds to get the unique combination). Then you may create an infoset using cubes and this master data object. Join the materail numbers in all. Display this object in report.
    I hope it will help.
    Thanks,
    S

  • Selling good to cutomer after taking for the materials in vehicle

    The sales process for a scenario goes like this,every day certain qty of material is loaded in vehicle and at each customer point order is taken material is delivered.How to bring this process under SAP.Ex(Dealer loads material in his vehicle goes to his route takes order from retail stores).So stock should deduct when certain material is loaded,unsold stock have to taken back at the end of the day

    Pradeep,
    I think this perticular scenario reminds me of Consignment sales, in which we fill up the goods at a customer location, and all the rights on the materials remains with company till it is issued to his end customer then that material will be billed. The rest of the material will be brought back by consignment pick up process, and if any returns from the end customer it will be a consignment return.
    In this case suppose the van sales man is made as customer, and company has issued stock to him by consignment fillup, if he sells it will be consignment issue, and if he bring back the unsold items will be consignment pickup and so on.
    I think this would help you in mapping your process now.
    Regards,
    Sridhar.

  • Characteristic values for the material and plant combination...

    Hi Friends,
    I would like to know how can we maintain the characteristic values for the combination of Material and Plant though the material is not batch managed?
    Thanks in advance,
    Ram

    Hi Rajendra,
    Thanks for quick reply. I am maintaining under classification view but it does not ask plant any where. So the value will be same across all the plants but i want to maintain characteristic values separately under each plant for same material.
    Regards,
    Ram

  • How can do the un-packing for the materials issued to sub-contractor

    Hi,
    I have a requirement to un-pack the return sub-contact orders.
    Basically the materials should be distributed back..
    I do not understand how i can do for the child products.
    Any ideas?

    Well, that's different. Most people do not install anything on their PC to read an HFS+ disk, so I assumed it was formatted for the PC. [See my above post|http://discussions.apple.com/thread.jspa?messageID=12843313#12843313].
    Note that it is the same as what you asked about, except with numbers instead of the letter equivalents.
    Posix permissions are for User;Group;Other (ugo) and each one can have read/write/execute permissions. Read = 4, Write = 2, and Execute = 1. So, for rwx you set 421=7.
    I try to make it safe by not typing in the file path. If you do what you posted, you will change the startup volume's permissions. The path to your external is /Volumes/ext hd mount point. If you start typing the path and accidentally hit return before finishing the full path, you could fubar something you didn't want to. So, I type the command, leave a space, and then drag the target to the Terminal window.
    You might also consider the GUI based permission changing program, [BatChmod|http://www.macchampion.com/arbysoft/BatchMod/Welcome.html].
    Message was edited by: Barney-15E

  • How to create the Access sequence for the Vendor+material+plant combination

    Hi all
    Please let me know How to create the Access sequence for the Vendormaterialplant combination..
    Whats the use? What its effect in purhcase and taxe..
    brief me please

    Hi,
    you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
    goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
    find the tax condition type. see in it which access sequence is attached.
    if there is none then use JTAX used for taxes in India.
    or you can create the similar one for your.
    to create the same goto OBQ2.
    new entry or copy JTAX.
    and assign the access sequence to condition type.
    this will resolve your problem if you just need to assign the access sequence.
    regards,
    Adwait Bachuwar

  • Configuration part for the activation of plant maintenance

    Sir/Madam
    i have to implement SAP in metrology for gauge/instrument updation. What are the configuration i have to do for that?

    Hello Tanuja,
    For the link from Portal to work, the SPRO configuration should be in place.  Every link in Portal should have a corresponding Service/Resource in SPRO. 
    Refer this link - [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e05d564f-6e1c-2d10-42b2-9e21a211950d|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e05d564f-6e1c-2d10-42b2-9e21a211950d]
    If you still face problems configuring, provide exactly where you are facing the problem and also more information on the same.
    Cheers
    Madhu

  • Error while maintainin business place for the combination of plant

    hi experts,
    Input values must be defined in Table J_1BBRANCH
    how to solve this its urgent
    points will be rewarded for useful answers.
    regards,
    priyanka reddy.

    Looks like you are trying to assign a business place which is not existing.  First create business place, activate it and then assign it to the plant.  All the relevant nodes are in the following IMG path.
    Cross-Application Components -> General Application Functions -> Place of Business ->

  • Standard report to see the Batch numbers for the materials

    Hi Gur's
    I am searching for a standard report that would give out details from the purchase order. The details that i need are as following fields 1. Purchase order batch, 2. Purchase order number 3. material
    can you any one help me on this
    regards
    AM

    Hi Teja
    You can use T-Code - MB51, here you can generate report material wise purchase order with batch numbers and here to see stock in so give movement type 101 to see all Batches received against purchase orders
    regards
    madhu

  • Display multilevel BOM for multiple materials

    Hi,
    I am to trying to display multilevel BOM explosion for multiple BOMs valid to custom date. Then I would like to export this list of all components to Excel.
    Best solution would be if to create QuickView to do this.
    So far I have been able to Join tables MAST - STPO, this shows me only one level of BOM (sort of like CS03 transaction) not a multilevel view (CS12). Is it possible to modify this to display multilevel view?
    Thank you,
    Tomas

    Dear Thomas,
    in order to have a multilevel Bom explosion you must use only fm : CS_BOM_EXPL_MAT_V2 because you won't succeed to have a multiplevel with a simple query.
    I advise you set MEHRS = X for active multilevel logic.
    Let me know if i have been useful for you
    Daniele

Maybe you are looking for

  • Difference between FINT and F.24 for interest calculation

    Hi all! I am currently configuring the calculation of interest on arrears. To be more specific - an interest has to be calculated only on overdue items cleared with a payment. SAP advises to use F.24 transaction in this case. The problem is that F.24

  • External monitor not being detected

    I recently sent my macBook away for repairs, it was only software problems, the engineers it seemed simply uninstalled and reinstalled the software. Since I have had it back, I cannot get it to detect my Dell 2209WA. It was fine before. I am using a

  • Want to add company logo in sharepoint site 2013 login page..

    hi, I am trying to setup a customize SharePoint login page with company logo, while searching I found that it requires FBA authentication enabled which I did. now I have challenge, how to add company logo in SharePoint login page so while heats to si

  • IPhone 6, manual sync of contacts and calendar with Google?

    I usually prefer a manual sync of things like contacts and calendar with Google, rather than an automatic periodic sync. I don't change my calendar or contact list very often, so manual sync works best for me. I could do this with Android, but with i

  • Running an fcp studio project (5.0.4)  on macbook pro software

    I'm running a project on final cut pro studio 5.0.4 and would like to screen footage on a laptop - preferably on a new macbook. i'm wondering if i can run a project that's compatible with both versions of the software. i'd like to screen and select s