BOM Item Details fetching issue
Hello Friends,
Actually I am fetching BOM item details data, with the use of STAS & STPO tables but to my surprise I am not getting all counter values in STPO tables i.e. first I am passing BOM NO, Alternate & Item ID To STAS table to get counter details and then passing these counter values in STPO table to get item data like qty , variable size item data etc. But I am unable to find all counters which are available in STAS are present in STPO table e.g. in STAS table there are 113 counters but in case of STPO table only 37 counter values are found.
Kindly provide your valuable inputs for above mentioned issue.
Thanks in advance.
Regards,
Tejas
Hi Vivek,
Thanks for your reply.
Request if you can elaborate your answer.
Right now I am taking counter values from STAS and then passing them to STPO but many of counter values are not available even I checked deletion indicator it is not marked with X still those are not available in STPO.
Regards,
Tejas
Similar Messages
-
Item test in BOM item detail screen
Hi All,
I need to fetch tem text (POTX1) field in BOM item detail screen. But I have not found in any table.
Can you tell me me how to get it?Dear Chetan,
1) Just check the table STPO
2) in this table u can find field "POTX1"
Added
just Go to Settings & click on Field for selections
then click on field "POTX1" and press enter
Hope the above answers ur query
Regards
kumar
Edited by: kumar kumar on Sep 26, 2009 10:29 AM -
Bapi or Function module for getting Bom Item Details (Urgent)
Hi All,
I Want to get the Bom Item Details Corresponding to Production Order Number.
So Please Provide me Some Function Module or Bapi So that by giving the
Production Order number I will get all material related to that PO.
Thanks In Advance.Hi,
use the function module.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
capid = 'STD1'
datuv = sy-datum
mktls = 'X'
mehrs = 'X'
mmory = '1'
mtnrv = matnr
werks = werks
tables
stb = it_stb2
matcat = it_matcat
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
others = 8.
Regards,
Sankar. -
Batch Number for Valuation Type in BOM item detail
Dear PP Expert.
Is it possible to maintain batch number for valuation type in BOM item detail ? My requirement is for example in bom item 10, component A is maintained with batch number for valuation type so that in production order batch number field automatically filled.
Fyi i have tried user exit : Enhancement for BOM item: PCSD0002. Here we can maintain valuation type for component in item detail in customer tab. But unfortunately valuation type here is not link with batch number for valuation type in Production order.
Regards,
ArmanHi JH thanks for your quick reply,
Let me describe it more specific, I have two material FG and SFG. Material FG is maintained with valuation type so when we do goods receipt for SFG it's asked to input valuation type in batch field. In stock SFG material qty is separated for each valuation type like batch.
Now i want to maintain in BOM for FG, where component SFG has fix the valuation type / batch so that in production order we don't have to choose manually. Do you have any idea ?
Regards,
Arman -
Tables for Production order BOM item Details
Dear all,
I am new to PP Module i want know table where we can find BOM quantites used against Production.
Also Please help me with table Structure of PP Module.
Regards,
Gaurav SoodHi can you please tell how link this table with AFPO table
STLTY STLTY CHAR 1 0 BOM category
STLNR STNUM CHAR 8 0 Bill of material
STLKN STLKN NUMC 8 0 BOM item node number
Regards,
Gaurav -
Hi,
Whats the usage of table STAS and how different is it from STPO ??. Kindly respond.
RgdsSTAS BOM Item Selection
STPO BOM Item Details -
New business requirement for ECM changes to BOM item detail
Hello SAP ECM gurus,
I need your guidance on below requirement from the customer in ECM.
We have 'Date effectivity' in our system i.e. object changes become effective on 'valid from' date.
We also have a custom enhancement where BOM header status is controlled by the 'post approval' process via workflow.
i.e. BOM status is changed to 11 when 'Complete Change' status is set on OMR and changed back to '01' automatically when 'Release Change' is set on OMR.
We have a new requirement from business as described below:
For ex:
2 components (COMP1 & COMP2) are added to BOM through ECR1 effective from 01-AUG-2011 till Infinity
2 more components (COMP3 & COMP4) will be added to the same alternate through ECR2 effective from 01-SEP-2011 till Infinity.
ECR1 changes are made and OMR status set to 'Complete Changes' changes i.e. BOM status is 11 effective from 01AUG2011 till Infinity.
At this point of time, ECR2 is created. When changes are being made to the same BOM using ECR2, COMP1 & COMP2 (added through ECR1) appear in the BOM.
This is not desirable for the customer. They do not want to see COMP1 & COMP2 to appear when changes are being made to ECR2 as ECR1 is still not post approved. They expect COMP1 & COMP2 to appear in the BOM only when ECR1 is post approved.
How can we control effectivity of COMP1 & COMP2 such that, they become available in the system ONLY WHEN 'Release Change' is set on OMR?
Can 'Parameter Effectivity' be used in this scenario?
Thank you very much for your advice and guidance,
BKHi JH thanks for your quick reply,
Let me describe it more specific, I have two material FG and SFG. Material FG is maintained with valuation type so when we do goods receipt for SFG it's asked to input valuation type in batch field. In stock SFG material qty is separated for each valuation type like batch.
Now i want to maintain in BOM for FG, where component SFG has fix the valuation type / batch so that in production order we don't have to choose manually. Do you have any idea ?
Regards,
Arman -
Bom item data - Document assignment not getting saved in table STPO
Dear All,
As per out customer requirement, they want to display assigned drawing documents of Bom items in CS11. But it is not reflecting in cs11 eventhough we have assigned documents in Bom item detail overview Document assignment tab page. Moreover this is not getting saved in table STPO.
Waiting for solutions
Thanks & Regards
Dhananjay KulkarniPlease understand my customers requirement,
Presently they are assigning drawing document of each mat in material master. And if they want to see the drawing of each component of bom through Bom maintenance then they double click on component in bom, goes to mat master then additional data then document data and then drawing. In this way they need to open minimim 5 windows, which they want to make minimum 2 windows.
In bom they are having more than 300 components. This is not possible to define document as component with item category D of so many components. One more idea I given to them is to club all drawings in one document and define that document as component with item category D, but in this way they can't identify the individual drawing with part name.
One more idea I given to them is to assign drawing document of individual component in item overview - Document assignment tab page from where they can open the drawing but it needs to open minimum 3 windows. So they are ready to assign drawing document in item overview - Document assignment tab page but they want, it should reflect in CS11 document column, from where they can easily open the drawing document.
One more thing I observed that, assigned document to item overview - Document assignment tab page is not getting saved in Table STPO. I can't see this field content in STPO, which may be the reason that it is not reflecting in CS11.
Is anything missing from Document management system?
Please think and reply friends it's Urgent.
Thanks & Warm Regards
Dhananjay Kulkarni -
Issue in MIGO item detail tab Enhancement
Hi,
I have enhanced MIGO by adding a text tab in the item detail section which shows the PO texts as in ME23N
'texts' tab.
Now when the user executes tcode MIGO and enters the PO number for doing goods receipt
the the text tab screen flashes before the material tab is displayed at the item level.
The text tab screen is designed like the ME23N text tab with a tree control and editor.
I searched SDN but could not find any related link for this issue.If there are any such issues answered
please give me the link for the same.
Thanks,
R.PaulHi,
Did you use MB_MIGO_BADI?
Regards,
Arpan -
PCM 10 Line Item details (BOM model)
Hi there,
What is the purpose of the line item details. has anyone already used this dimension and can explain what for?
Regards.Line Item Details are exactly that: details of your line items.
e.g. You decided to spread all salary costs by the driver nr. of FTE's to your Activities.
But the salary cost has multiple components: base salary, bonus, pension, etc.
Now, LineItemDetails allows you to keep that detail out of the main PCM cube. This limits the amount of driver assignments you have to maintain, and is also good for performance (smaller cube!).
However, you lose the traceability (CostObjectValues can only be viewed by LineItemValue, and not LineItemDetailValue). But then again, it's not allocated differently, so you can always lookup the components of salary in a different report (on LineItemDetailValue table).
You need a LineItemValue rule to push the detail out of the LineItemDetailValue table to LineItemValue in order for this to work, e.g. :
Function CellValue
RestrictDimension("Line Items","Salary")
CellValue = LineItemDetailValue(,,,"Salary")
End Function -
BOM item category T not accepting zeros
how can i config. the system so that a component with item categort T (text) for a BOM can accept 0s ? it always asks me for a qty when there shouldn't be?
Hi Raf,
Just put it 1 and then in Material detail screen set Bulk Material tick on.After doing so you can find the component in Process order component screen but there is no need to issue it.
This indicator also works same for other Item Catagory also.
Bulk Material means - This materail is always available at the workcenter and there is no need to issue it.
Indicator: Bulk Material
This indicator defines a BOM item as a bulk material, which is available directly at the work center (for example, washers or grease).
The dependent requirements of bulk materials are not relevant to materials planning. This means they are not taken into account for net requirements calculation. Therefore planning for bulk materials should be consumption-based.
If bulk materials are subject to material requirements planning, you must create planned independent requirements for them.
Use
Dependent requirements are only created in the planned order for information purposes and they can be displayed there. Dependent requirements for bulk material are not shown in the MRP list or the stock/req. list.
You can maintain this indicator in both the material master record an the BOM item. The indicator in the material master record has higher priority.
If a material is always used as a bulk material, set the indicator in the material master record.
In this case, the Bulk material indicator in material master record is automatically set in the BOM item.
If a material is only used as a bulk material in individual cases, set the indicator in the BOM item.
Regards,
Dhaval -
SAP Note 1486147 - TDS line item details not flowing in Form 16 A Samrtform
1. Old Form 16 certificate is printed before 01.04.2010 and new certificate after 01.04.2010. (its correct SAP has written code in such a manner Old one is SAP script and new on is Smartform.)
Old FORM 16 A gets Acknowledgement No details correctly.
2. Acknowledgment No details are not flowing in the NEW Smart Form of Form 16 A.
When I debug the program I can see PARTNER No details are copied in PAN NO field in TABLE : IT_LFA11[]
BUT PARTNER NO details are copied to PARTNERNO field in TABLE IT_LAFA1[].
TDS line item details on Smart Form is printed based on Partner no. here partner no. is blank as IT_LFA11 table is passed to smartform..
Program name : J_1IEWT_CERT
Include name : J_1IEWT_CERT_F01.
Code:
FORM CALL_FORM .
DATA: h_formname TYPE tdsfname,
h_fmname TYPE rs38l_fnam,
h_output_info TYPE ssfcrescl,
h_spoolids TYPE LINE OF ssfcrescl-spoolids,
h_output_options TYPE ssfcompop,
spoolno(10) TYPE c.
DATA : it_lfa11 TYPE STANDARD TABLE OF J_1I_LFA1 INITIAL SIZE 0,
it_printtab TYPE STANDARD TABLE OF J_1I_PRINTTAB INITIAL SIZE 0,
it_deduc TYPE STANDARD TABLE OF J_1I_DEDUCTEE INITIAL SIZE 0,
it_qrtrtab TYPE STANDARD TABLE OF J_1I_QRTRTAB INITIAL SIZE 0,
it_challan TYPE STANDARD TABLE OF J_1I_CHALLANDETAB INITIAL SIZE 0.
SORT challandetab BY j_1iextchdt DESCENDING.
it_lfa11[] = it_lfa1[].
it_printtab[] = printtab[].
it_deduc[] = it_deductor[].
it_qrtrtab[] = qrtrtab[].
it_challan[] = challandetab[].
h_output_options-tdnewid = 'X'.
h_formname = layout.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = h_formname
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = h_fmname
* EXCEPTIONS
* NO_FORM = 1
* NO_FUNCTION_MODULE = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION h_fmname
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS =
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
OUTPUT_OPTIONS = h_output_options
* USER_SETTINGS = 'X'
IMPORTING
* DOCUMENT_OUTPUT_INFO =
job_output_info = h_output_info
* JOB_OUTPUT_OPTIONS =
TABLES
it_lfa1 = it_lfa11
it_printtab = it_printtab
it_deductee = it_deduc
it_qrtrtab = it_qrtrtab
it_challandetab = it_challan
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
IF sy-subrc = 0. "1375614
CLEAR :spoolno,h_spoolids.
READ TABLE h_output_info-spoolids INTO h_spoolids INDEX 1.
IF h_spoolids IS NOT INITIAL.
spoolno = h_spoolids.
CONDENSE :spoolno.
MESSAGE i155(id_wt) WITH spoolno.
PERFORM update_cert_tables.
ENDIF.
ENDIF.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Can anyone Please help me to get TDS details on the Smartform.
Regards,
DivyaLalwani.
Edited by: kishan P on Feb 23, 2011 1:28 PMHi,
Achnowledgement details comes in table it_qrtrtab at run time in the smartform, you can dibug the program j_1iewt_cert and smartforms J_1iewt_cert where at run time you will able to see data avaialability, If values are not available in this internal table then check related notes given by SAP, I have already implemented this note and also faced same issue but my FI consultant has given me the related note and my issue was resolved.
Please checkout related notes and data population in the dibugger.
Regards,
Umang Mehta -
Populating the custom filed - added in BOM item.
Hello Friends,
I have a requirement like, for the custom field added in BOM item data, it should come filled while executing the CS02/CS03/CS12/CS73....transactions.
I have added a field which is one of the field from MARA table. what I have to do is to pass the MARA record into the custom field added based on IDNRK.
This should happen as soon as enter button is pressed after entering material, plant, bom usage value.
Please let me know if any exit is there wherein I can put the code OR if any other way!
Thanks.i have solved this issue by doing some R&D.
-
STPO's --- load date is not appearing in the item detail
Hi SAP Expert's,
We have a issue with inter company STPO, the Qty of mtrl is80 Kg. we received 10 kg on 1st feb.
In item detail --Delivery schedule tab it showing the delivery date is 1st feb and goods issue is 5 th feb.
Same like they delivery 10 kg .Delivery date is 25th feb,but the system not showing the Transport date, load date and goods issue date. Mtrl availablity date is past date of delivery date (1st feb).
When we change the delivery date 26 th feb. the system showing the transport date, load date and goods issue date. Now the mtrl availablity date is 25th feb.
Please any one can clarify my doubt. Why the system is not showing the transport date, load date, and goods issue date.
Please tell me that where its from the system picks these dates..
Thanks in Advance.
Thanks and Regards
Chandru.Hi Venkatesh,
Check the condition record in transaction NACE. Whether the print output field is present in the condition record.
Regards,
Gajendra. -
Error in Rush Order type with BOM item!!
Hello,
I am facing a very strange error while creating a rush Order with BOM item.
System Error:
1. No item category available (Table T184 SO ERLA TAQ).
I except the error. I get next error as
2. Structure explosion for item 000010 is not possible.
After this BOM explodes with only first 2 Sub Items ( Item cat for main item is determind as TAQ and Sub Items as TAE) , where as the complete BOM has 7 Sub items.
I have made the required configs in item cat determination in T184 table for order type SO, as follows.
SO ERLA - TAQ for Main Item of the BOM
SO NORM TAQ TAE for the Sub Item of the BOM
The same item (BOM ) works very well in OR/BV kind of sales order types, by exploding the BOM to full level(i.e all the 7 sub items are determined).
Has any one come across such an issue. Please let me know what could be the solution?
Thanks in adv,
ShripadHi,
Thanks,
In vov7 for TAQ Item Cat. the structure scope is maintained as 'A'. And that's the reason for Standard order 'OR' , the BOM is exploding properly.
It is only with Rush Order , the BOM is not exploding correctly.
BR
Shripad
Maybe you are looking for
-
Hi, I can not access CRM from outside the office network - Access denied You do not have sufficient access rights or privileges to perform this action. I can access CRM with same user id and password from our office inside the network. I can get th
-
How do I clone the console in dual monitors with a nvidia videocard?
Hi, I have two TFT monitors, one of 24" with a HDMI/DVI input and another of 17" with a VGA input. My nVIDIA videocard only has a DVI output (primary) and a HDMI output (secondary), so I'm forced to use the 17" monitor as primary until I hit the X se
-
Release Of Forecast From DP To SNP (For Some Locations, Only Baseline)
Dear All, Generally, we follow the following procedure....In the month begining, we generate the baseline forecast for all the locations (we are having around 20 branches). Then we used to open the DP planning book for a couple of days to our branch
-
Driver's SQLAllocHandle on SQL_HANDLE_ENV failed
I have an excel file which would connect to an Oracle database and run queries. It was working fine somet times back until i uninstalled/reintalled the oracle client. I have windows 7 running oracle client 11gR2. Below are the errors i am getting. "T
-
How to install + where to get: JDBC-drivers for Oracle8i
hi, i need to install the JDBC drivers (to use oracles XSU). where can i get them (for oracle 8i) and how do i install them. im not familiar with java so im looking for a step-by-step install-manual. thanks in advance