BOM update BDC

Hi all,
I want to populate a field for each component of the BOM using CS02. For example I have two components for a particular BOM.
I am selecting each component and going into the details of each component.Here I want to populate the field.
After populating this field, I am selecting the second component and repeating the process.
I want to write a BDC program for this.Can anyone tell me how to use the concept of table controls in this case with an example.
Here I don't have two separate files i.e., one for header and the other for items.
thanks
Sandeep

Dear Sandeep,
Please go through the link:
http://www.sap-img.com/abap/program-loads-the-bill-of-material.htm
Regards,
Abir
Don't forget to award Points *

Similar Messages

To display flatfile rec's under 1 Alternative BOM using BDc recording.

Hi,
I m trying to display flat file entire(i.e.. 4 rec's i m using) records vertically under one (Alternative BOM) for CS01-BOM using BDC recording method.
Now i m tried with the following code,i m getting as one (Alternative BOM) for one ff record,by replacing one by one.
But i want as vertically under one (Alternative BOM).
Can anyone help me to overcome this.
report ZBOM
no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
matnr(18),
werks(4),
stlan(1),
END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
posnr(4),
END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
matnr(18),
werks(4),
stlan(1),
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
posnr(4),
END OF BDCDATA.
data ibdcdata type standard table of bdcdata WITH header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ','
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro using 'SAPLCSDI' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RC29N-STLAN'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29N-MATNR'
'SOFTDRINKS'.
perform bdc_field using 'RC29N-WERKS'
'WIND'.
perform bdc_field using 'RC29N-STLAN'
'1'.
perform bdc_field using 'RC29N-DATUV'
'16.09.2008'.
perform bdc_dynpro using 'SAPLCSDI' '0110'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29K-BMENG'
'1'.
perform bdc_field using 'RC29K-STLST'
'1'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-EXSTL'.
perform bdc_dynpro using 'SAPLCSDI' '0111'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-LABOR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLCSDI' '0140'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSTP(01)'.
perform bdc_field using 'BDC_OKCODE'
'=FCBU'.
perform bdc_field using 'RC29P-IDNRK(001)'
BDCDATA-IDNRK.
perform bdc_field using 'RC29P-MENGE(001)'
BDCDATA-MENGE.
perform bdc_field using 'RC29P-MEINS(001)'
BDCDATA-MEINS.
perform bdc_field using 'RC29P-POSTP(001)'
BDCDATA-POSTP.
perform bdc_dynpro using 'SAPLCSDI' '0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSNR'.
perform bdc_field using 'RC29P-POSNR'
BDCDATA-POSNR. "'0010'.
perform bdc_field using 'RC29P-IDNRK'
BDCDATA-IDNRK. "'15'.
perform bdc_field using 'RC29P-MENGE'
BDCDATA-MENGE. "'1'.
perform bdc_field using 'RC29P-MEINS'
BDCDATA-MEINS. "'ml'.
perform bdc_dynpro using 'SAPLCSDI' '0131'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POTX1'.
perform bdc_field using 'RC29P-SANKA'
'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
clear ibdcdata.
endloop.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL NODATA.
CLEAR iBDCDATA.
iBDCDATA-FNAM = FNAM.
iBDCDATA-FVAL = FVAL.
APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi Dilip,
Please change your code.
I request you to please go through BDC tutorials before even starting to write the program.
There are many online tutorials which can help you with.
Also, search in SDN.. there you will get more than thousand results.. with the search term BDC.
Take this suggestion seriously before nayone reports the moderators that u have been posting this thread daily without taking into consideration the previous replies.
Regards,
Vishwa.

How we load Bom through bdc pgm

Hi I want to load BOM through BDC pgm in wich i am unbale to record the screect flow b coz it asking abt materical not matiching so can u plz send me the navigation screen flow and exple of fields in with i can enter in BOM throus cs01 transaction ... this is very urgent.. Thanking U

Hi
See the Below sample Program ....
Program Loads the Bill of Material
*&   REPORT ZPP0120                                                    *
*& Module : PP                                                         |
*& Application : The program loads the Bill of Material                |
*&                                                                     |
*| Modification Log                                                    |
*| ----------------                                                    |
REPORT zpp0120 NO STANDARD PAGE HEADING
                                  MESSAGE-ID z0
                                  LINE-SIZE 132
                                  LINE-COUNT 65(2).
*                      Internal Tables                                 *
*Internal table for the BOM file.
DATA: BEGIN OF i_bom OCCURS 0,
      matnr(18),
      werks(4),
      stlan(1),
      stlal(2),
      stktx(40),
      bmeng(16),
      menge(16),
      posnr(4),
      postp(1),
      meins(3),
      datuv(10),
      fmeng(1),
      idnrk(18),
      potx1(40),
      ausch(7),
      END OF i_bom.
* Extracting Document and Doc type for POSTP = D.
DATA : BEGIN OF i_stpo OCCURS 1,
       doknr(25),
       dokar(3),
       posnr(4),
       stlnr LIKE mast-stlnr,
       END   OF i_stpo.
* Local work area
DATA: g_my_rec_in   LIKE i_bom.
** Declare internal table for Call Transaction and BDC Session
DATA: i_bdc_table LIKE bdcdata OCCURS 0 WITH HEADER LINE.
*                      Global Variables                                *
DATA: g_counter(2) TYPE n,
      g_field_name(18) TYPE c,
      zc_yes TYPE syftype VALUE 'X'.
*                      Selection Screen                                *
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
PARAMETERS: p_fname1 TYPE localfile .
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-002.
PARAMETERS: p_rloc1 AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-005.
PARAMETERS p_group(12) OBLIGATORY DEFAULT 'ZBOM'.
SELECTION-SCREEN END OF BLOCK c.
SELECTION-SCREEN END OF BLOCK b.
SELECTION-SCREEN END OF BLOCK a.
**WRITE the report header
TOP-OF-PAGE.
INCLUDE zheading.
*                      Start of selection                              *
START-OF-SELECTION.
* Load Input file
PERFORM f_load_input_file.
* Create BDC records.
PERFORM create_bdc_records .
*&      Form Create_BDC_records
*       text:* perform the BDC for the records in the internal table
* --> p1        text
* <-- p2        text
FORM create_bdc_records .
DATA: v_stlnr LIKE mast-stlnr.
DATA: v_postp(1) VALUE 'D'.
IF NOT i_bom[] IS INITIAL.
** Open BDC session
    PERFORM open_bdc_session.
    SORT i_bom BY matnr werks posnr.
    SELECT SINGLE stlnr INTO v_stlnr
    FROM mast
    WHERE    matnr = i_bom-matnr
     AND     werks = i_bom-werks.
    SELECT doknr dokar posnr stlnr
                INTO TABLE i_stpo
                FROM stpo
                FOR ALL ENTRIES IN i_bom
                WHERE postp = v_postp
                AND   posnr = i_bom-posnr
                AND   stlnr = v_stlnr.
    SORT i_stpo BY posnr stlnr.
    LOOP AT i_bom.
      g_my_rec_in = i_bom.
      READ TABLE i_stpo WITH KEY posnr = i_bom-posnr
                                 stlnr = v_stlnr
                                 BINARY SEARCH.
      AT NEW matnr.
        CLEAR i_bdc_table[].
        PERFORM insert_screen_header.
      ENDAT.
* Setting up counter for 20 line items
      IF g_counter = 20.
        g_counter = 1.
      ENDIF.
      PERFORM bdc_field USING 'BDC_OKCODE'
                                    '/00'.
*next screen
      PERFORM bdc_dynpro USING 'SAPLCSDI' '0140'.
      PERFORM bdc_field USING 'BDC_CURSOR' 'RC29P-FMENG(01)'.
      PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
      CONCATENATE 'RC29P-POSNR(' g_counter ')' INTO g_field_name.
      PERFORM bdc_field USING g_field_name i_bom-posnr.
      CONCATENATE 'RC29P-IDNRK(' g_counter ')' INTO g_field_name.
      PERFORM bdc_field USING g_field_name i_bom-idnrk.
      CONCATENATE 'RC29P-MENGE(' g_counter ')' INTO g_field_name.
      PERFORM bdc_field USING g_field_name i_bom-menge.
      CONCATENATE 'RC29P-MEINS(' g_counter ')' INTO g_field_name.
      PERFORM bdc_field USING g_field_name i_bom-meins.
      CONCATENATE 'RC29P-POSTP(' g_counter ')' INTO g_field_name.
      PERFORM bdc_field USING g_field_name i_bom-postp.
      CONCATENATE 'RC29P-FMENG(' g_counter ')' INTO g_field_name.
      PERFORM bdc_field USING g_field_name i_bom-fmeng.
*next screen
      PERFORM bdc_dynpro USING 'SAPLCSDI' '0130'.
      PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
* Check the Item category to direct the screen flow accordingly.
      CASE i_bom-postp.
        WHEN 'B'.
          PERFORM item_text_insert.
        WHEN 'Z'.
          PERFORM item_text_insert.
        WHEN 'T'.
          PERFORM item_text_insert.
        WHEN 'N'.
          PERFORM bdc_field   USING 'BDC_CURSOR' 'RC29P-AUSCH'.
          PERFORM bdc_field   USING 'RC29P-AUSCH' i_bom-ausch.
* next screen
          PERFORM item_text_insert.
*next screen
          PERFORM bdc_dynpro USING 'SAPLCSDI' '0133'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_field   USING 'RC29P-EKORG' ' '.
        WHEN 'D'.
          PERFORM bdc_field   USING 'RC29P-DOKNR' i_stpo-doknr.
          PERFORM bdc_field   USING 'RC29P-DOKAR' i_stpo-dokar.
* next screen
          PERFORM item_text_insert.
* When POSTP = X, L.
        WHEN OTHERS.
          PERFORM bdc_field   USING 'BDC_CURSOR' 'RC29P-AUSCH'.
          PERFORM bdc_field   USING 'RC29P-AUSCH' i_bom-ausch.
* next screen
          PERFORM item_text_insert.
      ENDCASE.
      g_counter = g_counter + 1.
* next screen
      PERFORM bdc_dynpro      USING 'SAPLCSDI' '0140'.
      PERFORM bdc_field       USING 'BDC_CURSOR' 'RC29P-POSNR(01)'.
      PERFORM bdc_field       USING 'BDC_OKCODE' '=FCBU'.
      AT END OF matnr.
        PERFORM insert_bdc_new.
      ENDAT.
    ENDLOOP.
    CLEAR i_bom[].
    PERFORM close_bdc_session.
** Release the BDC sessions created
    PERFORM release_bdc.
ENDIF.
ENDFORM.                    " open_group
*&      Form bdc_dynpro_start
*       Initialize the screen
*      -->P_G_PROGRAM_1
*      -->P_G_SCREEN
FORM bdc_dynpro USING    p_g_program_1
                                p_g_screen.
CLEAR i_bdc_table.
i_bdc_table-program = p_g_program_1.
i_bdc_table-dynpro   = p_g_screen.
i_bdc_table-dynbegin = 'X'.
APPEND i_bdc_table.
ENDFORM.                    " bdc_dynpro_start
*&      Form bdc_field
*        Insert field                                                  *
FORM bdc_field USING f_name f_value.
CLEAR i_bdc_table.
i_bdc_table-fnam = f_name.
i_bdc_table-fval = f_value.
APPEND i_bdc_table.
ENDFORM.                    "bdc_insert_field
*&      Form open_bdc_session
*      Open the BDC session
FORM open_bdc_session .
** Open BDC session and creat and update condition records
CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
      client                    = sy-mandt
*       DEST                      = FILLER8
      group                     = p_group
*       HOLDDATE                  = FILLER8
      keep                      = 'X'
      user                      = sy-uname
*       RECORD                    = FILLER1
*       PROG                      = SY-CPROG
*     IMPORTING
*       QID                       =
EXCEPTIONS
   client_invalid            = 1
   destination_invalid       = 2
   group_invalid             = 3
   group_is_locked           = 4
   holddate_invalid          = 5
   internal_error            = 6
   queue_error               = 7
   running                   = 8
   system_lock_error         = 9
   user_invalid              = 10
   OTHERS                    = 11
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " create_bdc_session
*&      Form insert_screen_header
*       Insert the Header data into the screens
FORM insert_screen_header .
g_counter = 1.
PERFORM bdc_dynpro USING 'SAPLCSDI' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29N-STLAL'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'RC29N-MATNR' g_my_rec_in-matnr.
PERFORM bdc_field USING 'RC29N-WERKS' g_my_rec_in-werks.
PERFORM bdc_field USING 'RC29N-STLAN' g_my_rec_in-stlan.
PERFORM bdc_field USING 'RC29N-STLAL' g_my_rec_in-stlal.
PERFORM bdc_field USING 'RC29N-DATUV' g_my_rec_in-datuv.
* next screen
PERFORM bdc_dynpro USING 'SAPLCSDI' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29K-BMENG'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'RC29K-STKTX' g_my_rec_in-stktx.
PERFORM bdc_field USING 'RC29K-BMENG' g_my_rec_in-bmeng.
*next screen
PERFORM bdc_dynpro USING 'SAPLCSDI' '0111'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29K-LABOR'.
ENDFORM.                    " insert_screen_header
*&      Form insert_bdc
*      Insert the BDC session
FORM insert_bdc_new .
CALL FUNCTION 'BDC_INSERT'
     EXPORTING
       tcode                  = 'CS01'
*       POST_LOCAL             = NOVBLOCAL
*       PRINTING               = NOPRINT
*       SIMUBATCH              = ' '
*       CTUPARAMS              = ' '
     TABLES
       dynprotab              = i_bdc_table
EXCEPTIONS
    internal_error         = 1
    not_open               = 2
    queue_error            = 3
    tcode_invalid          = 4
    printing_invalid       = 5
    posting_invalid        = 6
    OTHERS                 = 7
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR i_bdc_table[].
ENDFORM.                    " insert_bdc
*&      Form close_bdc_session
*       Close the BDC session
FORM close_bdc_session .
CALL FUNCTION 'BDC_CLOSE_GROUP'
       EXCEPTIONS
            not_open    = 1
            queue_error = 2
            OTHERS      = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " close_bdc_session
*&      Form f_load_input_file
*      Load the file into the Internal table
FORM f_load_input_file.
IF p_rloc1 = zc_yes.
    CALL FUNCTION 'WS_UPLOAD'
         EXPORTING
              filename                = p_fname1
              filetype                = 'DAT'
         TABLES
              data_tab                = i_bom
         EXCEPTIONS
              conversion_error        = 1
              file_open_error         = 2
              file_read_error         = 3
              invalid_type            = 4
              no_batch                = 5
              unknown_error           = 6
              invalid_table_width     = 7
              gui_refuse_filetransfer = 8
              customer_error          = 9
              OTHERS                  = 10.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      STOP.
    ENDIF.
ENDIF.
ENDFORM.                    " f_load_input_file
*&      Form release_bdc
*      Release BDC session
FORM release_bdc.
SUBMIT rsbdcsub WITH mappe EQ p_group
                  WITH von EQ sy-datum
                  WITH bis EQ sy-datum
                  WITH fehler EQ '.'
                  EXPORTING LIST TO MEMORY
                  AND RETURN.
ENDFORM.                    " release_bdc
*&      Form item_text_insert
*       Repetitive code in the screen flow
FORM item_text_insert.
PERFORM bdc_dynpro USING 'SAPLCSDI' '0131'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC29P-POTX1'.
PERFORM bdc_field USING 'RC29P-POTX1' i_bom-potx1.
ENDFORM.                    " item_text_insert

Automatic Costing Run after BOM updates

Hi All,
My client requirement is that is there any possiblity of Automatic costing Run after BOM updates?
or any message can be triggered to Finance dept from SAP after BOM updates.
Thanks,
dev

Dear Dev,
In standard SAP it is not possible.
In case if you are using ECM - Change numbers for BOM creation/change then we can trigger a message.But in order to trigger
a report has to be developed,but in my understanding it is good to take only costing run for a period and the made BOM
changes will get reflected in the next costing run for the next period.
Incase if in the same period a new cost estimate has to be carried out means first CKR1 has to be executed.
Check and revert back.
Regards
Mangalraj.S

I want to load BOM through bdc how?

Hi i want to load BOm through bdc wht fields i can fill and plx help in screen flow while recording in shdb

Goto SHDB an dto recording with the help of your Function team. They will tell you which fields they want to fill and what.

Creating BOM using BDC :How to display no of records from flat file under

Hi,
      How to display no of records from flat file under one (Alternative BOM) vertically.
    When i execute, the records are replacing one by one.
Here my coding:
report ZBOM1
       no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
      END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
       idnrk(18),
       MENGE(18),
       MEINS(3),
       postp(1),
      END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
         matnr(18),
         werks(4),
         stlan(1),
         idnrk(18),
         MENGE(18),
         MEINS(3),
         postp(1),
         posnr(4),
      END OF BDCDATA.
data: ibdcdata type standard table of bdcdata WITH HEADER LINE.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              'SOFTDRINKS'.
perform bdc_field       using 'RC29N-WERKS'
                              'WIND'.
perform bdc_field       using 'RC29N-STLAN'
                              '1'.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                              BDCDATA-IDNRK.
perform bdc_field       using 'RC29P-MENGE(01)'
                              BDCDATA-MENGE.
perform bdc_field       using 'RC29P-MEINS(01)'
                              BDCDATA-MEINS.
perform bdc_field       using 'RC29P-POSTP(01)'
                              BDCDATA-POSTP.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                               BDCDATA-POSNR.            "'0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              BDCDATA-IDNRK.             "'15'.
perform bdc_field       using 'RC29P-MENGE'
                              BDCDATA-MENGE.             "'1'.
perform bdc_field       using 'RC29P-MEINS'
                              BDCDATA-MEINS.             "'ml'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO   = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR iBDCDATA.
    iBDCDATA-FNAM = FNAM.
    iBDCDATA-FVAL = FVAL.
    APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi,
the BDCDATA structure must be fnam, fval,dynbegin,dynpro,program.
You have to declare like this and pass this in your CALL TRANSACTION statement.
Please give some other table name for BDCDATA you declared for and also for IBDCDATA.

Program To Update BDC Session Status in SM35

Existing Process : Currently we create orders using a function module which internally uses BDC Session method for transaction VA01. If the session ran successfully then we check the status and use SAVE_TEXT to upload the long text for the order. But in some cases the order fails. Then the session will be errored out in SM35 and user runs the session manually and fixes the problem and post order. So the text cannot be uploaded now as the user ran the session manually. So I wrote a Z program to run the session using program RSBDCCTU which the runs the session in forground and get the text from memory which I exported to memory while initial transaction and upload it using SAVE_TEXT after the session ran successfully. This program works fine.
Problem : After running my Z program the order is posted and text is uploaded but the session is still in error status in SM35. The standard program RSBDCCTU just runs the session in foreground but does not update the status.
Is there any other way we can do this or any other standard programs available to update the status of the session.
Any help will be appreciated.

How are you importing text in the z program, which is exported in the function module? they are totally unrelated internal sessions.
You can as well import text and use SAVE_TEXT using user exit USEREXIT_SAVE_DOCUMENT_PREPARE in include MV45AFZZ after executing the error session in SM35, you don't need a Z program.
Use condition SY-BINPT = 'X' and T180-TRTYP = 'H' in the user exit to process SAVE_TEXT.
Regards
Sridhar

BOM Update using a function module - 'CSAP_MAT_BOM_MAINTAIN'

Hi,
I have problem in updating the item status for a BOM using a function module - 'CSAP_MAT_BOM_MAINTAIN'.
My goal is reset the Checkbox for 'Indicator: item relevant to production'. When i pass the value ' '[Space] to the structure field 'T_STPO-REL_PROD' it doen't work.
Do let me know if you come across such problem & what needs to passed as input to reste the checkbox in the BOM.
Thanks & Regards,
Bhargava

PLM wants to manipulate the Indicators u2013 u201CBulk Materialu201D & u201CCost Relevancyu201D in BOM.
Note: The 2 indicators [u201CBulk Materialu201D & u201CCost Relevancyu201D] are interlinked with each other for a business functionlity given by SAP. So, if we try to set both indicators we get the below SAP standard error.
E 29127 Bulk material not allowed for items relevant to costing
SAP Field Name                             RFC Tag       SAP values    PLM values Meaning for SAP field
Indicator: bulk material                   BULK_MAT   Space             !                   No
Indicator: bulk material                   BULK_MAT    X                   X                  Yes
Indicator: item relevant to costing REL_COST    Space            !                    Not relevant to costing
Indicator: item relevant to costing REL_COST     1                   1                   Not relevant to costing
Indicator: item relevant to costing REL_COST     2                   2                   Packaging operation
Indicator: item relevant to costing REL_COST     3                   3                   Packaging material
Indicator: item relevant to costing REL_COST     X                   X                  Relevant to costing
To achieve the clear/reset/set value for 2 indicators [u201CBulk Materialu201D & u201CCost Relevancyu201D] from PLM, only eitheir of indicators status needs to sent [i.e 1 indicator status @ a time].

Function module for BOM Update all line items at a time

Hi,
Please enlightenn us, which FM is do the update for BOM item datas. ( current FM is updated line item one item then come out and log in again updating another line item , thus cause more error are facing.)
we want a FM to update one time all the line time and come out from the screen.
Thx
Sathiya

HI,
As suggested above use CEWB or if you want to manage it via a Z program then use:
CSAP_MAT_BOM_MAINTAIN
or
CSAP_MAT_BOM_OPEN
CSAP_BOM_ITEM_MAINTAIN (Use these 3 in sequence, refer to the help file on the FM)
CSAP_MAT_BOM_CLOSE
Hope it answers your query.
Regards,
Vivek

BOM updation in REM

This is related to REM scenario.I have run MRP based on certain demand.Now some of my BOM components get changed.How can i update these new BOM to my existing planned order.
Whether i need to delete the planned order for updating the new BOM. Please clarify.
Regard's
Guruprasad

Hi,
Re-run MRP again (MD02) with below parameters
Planning Mode = 2 (Re-explode BOM and Routing)
Regards,
Sankaran

Synchrounous Processing and Synchrounous database updates - BDC

Hi,
I like to know the difference between Synchrounous Processing and Synchrounous database updates In BDC, I have read many threads regarding the same but I didn't find anything which explains my query. Please explain me with an example.
Thanks,
Narayan

Hi,
Synchronus method:
In synchronus method until one record process takes place into database next record will not process.
Incase if there is any change in the table all the related tables will be changed accordingly and then
sy-subrc will be returned. So, in All synchronous update the sy-subrc is set to 0 only when the particular
transaction is executed and also the changes have done to the database.
Asynchronus method:
In asynchronus immedate updation of data into database table.
In case if there is any change in the table the sy-subrc will be immediately returned and then the related tables will be updated.
In asynchronous even if the related tables are not updated the sy-subrc will still be returned as 0. i.e.
the sy-subrc is set to 0 if the transaction is executed without any fail not the database changes.
I hope it helps.
Thansk,
Archana

BOM (cs01) bdc code

Hi All,
I need BDC code for BOM (cs01), i don't know how to handle "Table Control" in BDC.
Flat file is also required. Because, i think flat file arrangement will be differ from regular flat file format.
It is very urgent.
Thanks & Regards,
Srinivas

Hi Satya,
To handle table control you need to do the recording of cs01 accordingly.
Record the transaction entring the header data and when you come to the table control, enter one or two rows and press new entries, which gives you new rows for value entry. Finally once you are done with the recording, get the program from the recording.
At the point where you entered value for table control you can see the row/colum indexes. The "New Entry" okcode will give you an initialized index for the new rows.
you need to dynamically increment the indexes for the table control while you loop throught the table control data (item data).
after you pass say 5 to 10 records to the table control, you have to call the OKCODE for the "New Entry" button which gives you fresh rows for value entry and you need to initialize the indexes for the table control rows. This cycle continues until you complete the entried for table control and then proceed with further processing.
Reward Points if this helps.
-Thank you-

Updating BDC: Help required...

Hi All,
I have a requirement to update a Transaction 'FD32' using BDC. But in my case the user doesnt have authorization to this Transaction.
My question is...
Can the BDC update the transaction for an unauthorized user.
If NO...What is the way to update the Transaction for this unauthorized user...
Thanks in Advance
Nanda

Hi Nanda,
Have you looked standard program RFBIDE00?
Please check program documentation perhaps it may help.
Regards,
Ferry Lianto

BOM updation in production order

Dear All
I have created production order against one specific BOm
Then i changed the BOM line items & again i have created one more production order but new BOm items are not updaetd in the new production order
pl help
regards
Kiran

Kiran,
I would suggest you to check the Valid from Date of specific component you are taking about, probably you would have added with effectivity date 10.01.2008. Now when order is exploded it is looking for valid components as on 03.01.2008, this may be the problem.
A simple suggestion here is that you execute Read PP Master data for this order in the change mode(CO02), from the menu bar Functions--->Read PP Master Data. You would get a Pop-up screen Read PP Master data.. here in the screen "Cont." button. One more screen pops up, here in the BOM explosion date you give it as 10.01.2008. Hope you will get the new component also in your production order now.
Regards,
Prasobh

CS01 CS02 BOM Update

Hi,
In CS01, CS02 transactions, i need to update de field STPO-DSPST. I tried to use BADI BOM_UPDATE, CEWB_BOM_UPDATE, exit PCSD0xxx and BTE CACS0000 but in all of them i didn´t get to modify the valeu of this field.
Can anyone help me?
Thanks!!!!!
Ricardo

Hi ,
Please read the below help for Explosion type .
If the Explosion type is Phantom assembly off
You use the Phantom assembly off indicator, to determine how an assembly with the Phantom assembly special procurement key is exploded.
If the header material of an assembly has the special procurement key for a phantom assembly in its material master record, the standard SAP System:
Transfers dependent requirements for the superior assembly directly to the components of the phantom assembly
Generates planned orders or purchase requisitions for the components of the phantom assembly
If you set this indicator, dependent requirements are also generated for materials that have the Phantom assembly indicator.
So when you are using the badi or function check your material master record which a link to explosion type.
Please reward if useful.

BOM update BDC

Similar Messages

Maybe you are looking for