Boot Camp: Windows won't connect to AirPort router

I got the new AirPort router from Apple in March and since then it's been working perfectly with my Macs as well as on Windows using Boot Camp.
A few days ago, I switched my AirPort setting to be Wireless-N ONLY so I could see some speed improvement on my Mac. The next time I used Windows, it would not connect to the network, so I then went back to my AirPort settings and switched it back to 802.11 G and N compatible. But both my Windows computers still won't connect.
Please help me set up the correct options. Thanks.

I just saw your post - I posted the same thing a little after you did. Did you figure out the problem? I haven't gotten any answers yet to my post.

Similar Messages

  • Boot Camp  - Windows won't install

    Hi,
    I'm running OS X 10.10.2 on my iMac 7.1 (2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM). On completion of Boot Camp partition Windows 7 DVD won't install - I get a black screen prompting me to select boot mode. However, keyboard and mouse are disconnected at this stage leaving me powerless to do anything. There's nothing wrong with the Windows 7 DVD, I might add - installs perfectly when running Parallels Desktop 10/Parallels virtual machine. Can anyone tell me, how to resolve this annoying issue?
    Regards missil1

    missil1 wrote:
    Hi CellarDwellr,
    Thanks for your answer.
    Although my install DVD does indeed bear the "OEM" mark, I don't think the "OEM" is the root of the problem, as the DVD installed perfectly on my iMac by means of Parallels Desktop 10. Furthermore, I made a perfect and smooth installation of Windows Vista (OEM DVD) on my iMac some years ago by means of Boot Camp (running Snow Leopard at that time).
    Hence, I'm inclined to suspect this to be an OS X issue rather than anything else.
    Finally, I did comply with the Boot Camp manual on both occasions.
    Regards missil1
    You can't just compare your windows 7 oem to your old windows vista oem. There are many - probably hundreds - of oem versions out there. You probably have a limited notion of what "oem" stands for. An OEM version of Windows is a special version for a specific computer or models of computers and none of them are for Apple. Dell or HP might sell OEM versions of windows, tailor made to work with their models of computer. Which means they preinstall drivers specific for, say, a Dell Studio laptop. Often they will also force a partitioning scheme on a computer's harddrive as well. If it worked in Parallels, you were lucky.
    If you want to try Boot Camp again, use Boot Camp-assistant to delete your Boot Camp partition and start over.

  • OS 10.5 - Boot Camp - Windows won't read Mac Disc for Driver Install

    Hello everyone.
    I have been through half a dozen headaches and a dozen hours of time wasted on this problem. I've tried multiple windows discs untill finally I bought a brand new version of Windows XP Pro. I've followed all of the instructions in my printed boot camp manual and I continously run into one problem:
    Once windows is installed completely and I am at the windows desktop and need to eject the windows disc and insert the leopard disc to install drivers, I do so and windows does not recognize the mac disc whatsoever. It says the drive is empty, it is 0kb of 0kb, I cannot explore the drive, I cannot do anything. If I open it it is blank. I cannot access the internet in any way on windows because there are no corresponding drivers.. so I am at a loss.
    Can anyone please help me? What do I do? I really apologize if this question has been answered, but I could really use some help.

    Hi Sotaris,
    It's a little vague what you mean by the "leopard disk". Do you mean the disk of drivers Boot Camp burns, or the actual Leopard installation DVD?
    What you're supposed to do is launch Boot Camp while booted to the Mac OS. One of the first things it does is create a CD of Windows drivers that XP will need for your Mac. So you must have a CD-R or CD-RW on hand.
    After that, Windows XP is installed. When that's done, there will be a number of hardware components that XP naturally doesn't recognize. That's when you insert the driver disk Boot Camp creates. I may have listed the order of things a little bit off here, but the main point is it sounds like you're skipping, or missing the part to create the Windows driver disk and trying to put the Leopard DVD in the drive.

  • ITunes (Windows) won't connect to Airport Express

    I've recently upgraded to version 10.2.1 and now when I try to play music on my Living Room speakers, I get an error saying, "An error occurred. The network connection failed." (My Mac computer has no problem) Apparently, issue is with 10.2.1 and Windows 7. I tried the "repair" function in Control Panel, but it didn't help. Any suggestions would be appreciated. Thanks.

    I just saw your post - I posted the same thing a little after you did. Did you figure out the problem? I haven't gotten any answers yet to my post.

  • Boot Camp Windows 7 No Longer Connects to Internet

    Hello, I have a mid 2011 iMac with Boot Camp Windows 7 installation.  It has run flawlessly for more than a year.  Recently however, I have been untable to connect to internet when running Windows.  The connection works fine as a Mac.  While in Windows, I can momentarily (about 10 seconds) connect by disconnecting and reconnecting the LAN cable.  Then the "no internet."  I have all the latest Boot Camp support software installed.  All MAC and Windows software updates are installed.  My network devices are configured correctly.  I have rolled back to previous Windows updates with no resolution.  Does anyone have any suggestions?

    your router, your Windows firewall, you are using something other than Windows Defender (8) or Essentials (7), something else on the cable.
    you had a storm and the modem is on life support and your ISP can login and see what errors the modem is showing, you don't have network surge protection (APC tend to interfere, Cyberpower tend to work).
    What else is on the LAN?
    I found Windows to be funny about network but 8 and 8.1 have never had trouble. With 7 I sometimes had to reboot.
    Besides Apple and Windows, some drivers are or often still needed - manually.

  • Boot Camp Assistant won't read my windows 7 professional installation dvd, HELP!!

    Hi Guys,
    For some reason Boot Camp Assistant won't read my Windows 7 Professional x64 Installation DVD? It appears in Finder, however there is only 1 readme.txt file on the disc in Finder. I had Boot Camp set up and working on my Macbook for almost a year but had to remove it and start again, so I can't understand why all of a sudden it can't seem to load any Windows DVD's? I even tried my Windows 7 Home Premium disc but again, the same message keeps popping up that I need to insert my installation disc and wait a few seconds for it to be recognised
    Can someone pretty, pretty, possibly please help me out here in some way?

    Hi Guys,
    For some reason Boot Camp Assistant won't read my Windows 7 Professional x64 Installation DVD? It appears in Finder, however there is only 1 readme.txt file on the disc in Finder. I had Boot Camp set up and working on my Macbook for almost a year but had to remove it and start again, so I can't understand why all of a sudden it can't seem to load any Windows DVD's? I even tried my Windows 7 Home Premium disc but again, the same message keeps popping up that I need to insert my installation disc and wait a few seconds for it to be recognised
    Can someone pretty, pretty, possibly please help me out here in some way?

  • Mac mini, boot camp, windows vista/windows 7, DVI to HDMI, no display

    I have a mac mini from 2008 on which I have put windows Vista via boot camp. I have connected the mini using DVI to HDMI, to my Sony Bravia 1080p HDTV.
    When I log into the mac 10.6.2, all seems fine and I can see the display alright.
    When I log into Windows Vista, I cannot. The display stays black even though I hear the Windows startup sound.
    I tried force-upgrading to Windows 7 and the same thing. In fact at some point I can see some of the stuff (like when starting in safe mode), but as soon as it boots up, the display goes blank.
    Normally I can see the display up to the point where it says loading Microsoft windows (with the small progress bar) and then, nothing.
    Any clues what may be happening?

    No response

  • Boot Camp Assistant won't work - keeps asking me to use Software Update.

    I am trying to use Boot Camp to install Windows but my Boot Camp Assistant won't work - it keeps asking me to use Software Update. So, even though I know everything is up to date, I start Software Update and it confirms that indeed everything is up to date. I try Boot Camp Assistant again, but the same message appears. I search every possible Boot Camp upgrade to download from Apple but they are all .exe files and need Windows to run, so those don't seem to be what I need. So I am caught in a circle of nothing working. Figures - the ONE weekend I need to install Windows and use a Windows-based program!!! And of course Apple support is closed over the weekend - another great asset to spending thousands of dollars on a product. ANY SUGGESTIONS?

    I too am having a similar problem. I am trying to install Windows in a newly created Boot Camp partition. I have Windows 7 but Boot Camp Assistant only mentions XP and Vista. I put in my installation disk of Windows 7 but it refuses to install it. My OS is fully up to date.

  • Please help with my Boot Camp/Windows problems

    I need to install windows on to my iMac to continue a course I’m taking at uni. Sadly it’s been a nightmare so far.
    I backed up all of my data and opened Boot Camp Assistant and tired to partition a section of my hard drive for windows. However it gave me an error each time I tired. After asking around I was told to buy idefrag and that should fix the problem - it didn’t. I was then told to format the hard disk and reinstall OSX. I did that and Boot Camp was now happy to partition my hard drive.
    I insert a copy of legitimate copy of Windows 7 Professional (x64) and clicked the Install Windows button when Boot Camp prompted me to.
    Windows installation menus open after a quick restart but quickly tells me it cant see any partitions/drives to install on.
    I googled the problem read that the partition should be formatted to NTFS for windows seven to install and that OSX wont do that. I installed a free program called NTFS-3G and that formatted the partition to NTFS.
    Windows now saw the drive and went through the installation process. After it has gone through its automated routine it restarts the Mac and takes me to a "Press any key to boot from CD or DVD..."
    I press Enter and it takes me back to the very first installation menu and restarts the whole thing until it has once again gone through its automated routine and restarted the Mac and told me to press any key.
    This happened ever time. During the install I am presented with the options of "Installing Windows" or "repairing windows". When I tried the automatic repair it told me it could find no fault.
    So I started again by deleting the partition from within OSX and making a new one and installing windows and restarting but this time remove the windows 7 disk.
    All this did was boot the Mac up in OSX. I then restarted the Mac and held down the options key. This presented me with the choice of booting from the Mac HDD or the windows partition. I chose the windows partition and it takes me to a black screen with a flashing line/prompt and does nothing else.
    I assumed Windows 7 might not like my Mac for some strange reason so brought a copy of Vista business with SP2 (x86).
    I deleting the partition from within OSX and made a new one. I began installing Vista. It told me it could only install on NTFS formatted partitions/drives.
    Once again I used NTFS-3G to formatted the partition to NTFS and relaunced vista.
    It installed fine and restarted itself. Once again it took me back to the first installation screen just as windows 7 did. I tried restarting without the disk (hold options again) and it took me back to the black screen with the flashing line and sat there forever.
    I restarted the Mac with the OSX 10.6.1 install disk in the drive and it booted up ignoring the disk. I launched the disk from desk top and looked through the install options hoping to find some drivers or extra installs for boot camp/windows. I couldn’t see anything.
    I don’t know what else to try.
    I have a 21.5' iMac:
    Model Name: iMac
    Model Identifier: iMac10,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 3.06 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 4 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: IM101.00CC.B00
    SMC Version (system): 1.52f9

    Re-read in the PDF guide in Boot Camp Assist where it tells you to format the "BOOTCAMP" FAT volume when in Windows.
    http://www.apple.com/support/bootcamp
    But I have really only one question:
    Was this an electronic school download edition? they offer students Windows 7 Pro. If this was an electronic version from school, fine, but it has to be burned at *reduced 2x speed* or it won't work, and can have various (and different for everyone) problems, BUT: it is pretty well known and semi "documented."
    You do NOT need NTFS driver. That is totally wrong.
    Sorry you bought Vista, I used it but once Windows 7 went Beta and then RC I've used 7 and never looked back (what Vista should/could have been but was not, even with SP2).

  • Boot camp Windows xp SP2 wireless is extremly slow

    boot camp Windows xp SP2 wireless is extremly slow or doesn't work at all. It shows connected on weird 270Mpbs good connection. Other PC and laptops work fine. They are on Linsys wireless N GB router.
    I heard some people have problem with SP3, but I am on SP2. If I boot into MAC os, it works perfectly.
    It's MacBook 13, just bought it last week. All drivers are updated.
    Any suggestion?
    Thanks

    I tried what Snackyotter did with no success. I don't really use the Caps Lock Key, or the Option Key at boot, when I want to switch to Boot-Camp and Mac OS X I just change the Boot Disk in System Preferences & vise-versa. Thanks for trying to help though. This weekend I am returning my Apple Slim Wireless Keyboard at the Apple Store. I still have the original packaging and receipt, I bought it offline and received it a few days ago. If the return doesn't go as planned and I'm stuck with this keyboard I will keep this question labeled 'unanswered'. If the return does go well I will label it solved, there is no need really to keep this topic waving around when I no longer have the Apple Wireless Keyboard. I have never EVER even thought of returning an Apple product before, wish me luck. To Apple though I must say that I am disappointed that you have had many months to fix this simple issue since this keyboard came out, but have decided not to. I will try to keep you updated. Again Thank You for your kind support.
    tmt345

  • How do you switch iMac 27" display when in Boot Camp (Windows 7)?

    Hello,
    My 27" iMac works great as an external display as long as the iMac is booted into OS X and I hit command-F2. 
    When I boot my iMac into Boot Camp (Windows 7) however, hitting command-F2 doesn't work to use my iMac as an external display.
    Is there any way to get the 27" iMac to enter external display mode if you have booted it into Windows 7 rather than OS X?
    Thanks!

    I have the same problem, 64bit Win7 Home Ed. loaded with all the recent updates including a Bootcamp patch from last week.
    I posted on 9/2/10 and haven't gotten a reply. Did a lot of Google searching but only found it is a problem many have, but that no "real" solution is available.
    Since I have had issues in Win7 after it crashes this way and after on/off (unlike you), I'm not willing to mess with it anymore.
    I doubt Microsoft will commit to fixing this and it's not likely to be a top priority for Apple.

  • HT201541 Mac mini Late 2014 Boot Camp Windows 7 sound issue

    Hi,
    I'm wondering if anyone can help me with my Mac mini (Late 2014) and Boot Camp (Windows 7). The problem I'm having is that there's no audio when I boot into Windows 7, though everything works fine under OS X. After installing Boot Camp and Windows, the audio worked perfectly up until yesterday, and now there's nothing. I've tried updating as well as uninstalling and reinstalling drivers, but this hasn't helped at all.
    When I open Volume Mixer and Playback Devices, the sliders show that audio is playing, but I hear nothing - either from the built-in speaker or when I headphones.
    The Device Status indicates that "This device is working properly" and that the drivers are up to date. Tthe following drivers are installed:
    dmk.sys
    HdAudio.sys
    ksthunk.sys
    portcls.sys
    SysFxUI.dll
    WMALFXGFXDSP.dll
    Has anyone else encountered this issue, or does anyone have any tips on how I might fix this?

    Is the volume Muted? The Mac has an Audio database of devices and volumes in NVRAM, so an SMC Reset or PRAM reset might help. Please see this link for appropriate keys Startup key combinations for Intel-based Macs - Apple Support.

  • Boot Camp / Windows Partion... Can it be installed on a separate hard drive

    I am just beginning to explore the idea of installing Boot Camp & Windows on a new Intel Mac I will be buying. I've been reading a lot of references to the Windows partition...
    Can I dedicate a separate hard drive to Windows rather than partition my primary hard drive? If so would it be best to use an internal drive rather than a Firewire or USB drive. What would a reasonable minimum drive size be?
    Thanks for you feedback.
    Mike

    Hi Mike,
    since only the Mac Pro can have more than one internal HD, I assume you are talking about getting one of them
    With more than one internal HDs you can put Windows on the second, third, fourth internal HD with the BootCamp Assistant.
    On a side note: Windows does not support to be booted from external HDs (neither FireWire nor USB).
    Reasonable size depends on what you want to do with it.
    Windows XP itself takes up to 3.5GB of HD space after installation, Vista takes up to 10GB.
    Add to that the HD space you need for the programs and data you use/produce.
    And when keeping in mind the hassle it takes to enlarge the Windows partition if needed, my personal suggestions are:
    Windows XP at least 30GB, Vista at least 50GB.
    Have you already had a look here http://www.apple.com/support/bootcamp/ especially at the Installation Guide ?
    Regards
    Stefan

  • Boot Camp Assistant Won't Launch

    I have not been able to get Boot Camp Assistant to launch. I double click on it but nothing happens. No error messages. Nothing.
    Background: I just replaced the hard drive in my MacBook Pro Core Duo 2.4 GHz. Using the Restore Option of Disk Utility I copied a backup I had made of the full original Mac OS X partition from my old internal drive (I also had a Boot Camp Windows partition but that's another matter I think) to an external USB drive. Booting and operation from the new hard drive once restored seemed fine, but when I tried to launch Boot Camp Assistant to create a partition for Windows nothing happened. I restarted off my external USB backup drive and tried to launch Boot Camp Assistant from that drive, still nothing.
    I then performed an Archive & Install of Tiger (I'd been running Leopard 10.5.8) and Boot Camp Assistant still wouldn't start. I'm currently updating Tiger to Leopard on my MacBook Pro but I'm not hopeful Boot Camp Assistant will launch after the update. Why would it? It didn't launch under Leopard after I restored it to the new hard drive. It wouldn't launch in Leopard when I started off my external drive. It wouldn't launch under Tiger after an Archive and Install. Obviously I've used Boot Camp Assistant before to create the Windows partition on my old drive so it would seem my firmware is current enough. I'm not getting any error messages to the contrary. I have no idea why Boot Camp Assistant will not launch.
    I'm wondering if there may be something in one of the Previous Systems folders that is preventing Boot Camp Assistant from launching. The old hard drive was pretty messed up with hundreds of "Missing Folders" in the Rescued Items folder which I think was created by Disk Warrior.
    Any ideas? Thanks.
    Also, I'm wondering if there is any way to go back and use a Previous System. You see, I'm going to have to reinstall a lot of software if I can't do that. I'd rather avoid that hassle. Thanks again.

    In addendum to my original post: If I open the Boot Camp Assistant package contents and drill down to the BootCamp Executable file and double click that, Terminal opens with the following message:
    Last login: Fri Jun  3 10:34:18 on console
    Macintosh:~ photoruss$ /Applications/Utilities/Boot\ Camp\ Assistant.app/Contents/MacOS/Boot\ Camp\ Assistant ; exit;
    2011-06-03 10:36:25.865 Boot Camp Assistant[122:10b] No Info.plist file in application bundle or no NSPrincipalClass in the Info.plist file, exiting
    logout
    [Process completed]
    If I do the same thin on my MacPro I get a different message and Boot Camp Assistant starts:
    Last login: Fri May 27 10:17:08 on console
    /Applications/Utilities/Boot\ Camp\ Assistant.app/Contents/MacOS/Boot\ Camp\ Assistant ; exit;
    macpro:~ russgreene$ /Applications/Utilities/Boot\ Camp\ Assistant.app/Contents/MacOS/Boot\ Camp\ Assistant ; exit;
    logout
    [Process completed]
    Does this help?

  • Remove Boot Camp Windows Partition

    I would like to know how to remove the Boot Camp windows partion all together from my computer.

    When I try to use the Boot Camp Assistant it does not give me the option of removing it.

Maybe you are looking for