Bootcamp issue with MacOS system partition

I started a thread earlier today but was referred here:
https://discussions.apple.com/message/20236917#20236917
In a nutshell: Bootcamp will not accept my newly installed SSD, where I already cloned the Mountain Lion installation to. The issue probably is that I used Disk Utility to format and partition the SSD, already designating a partition for Windows.
What is new since the last thread: I let Bootcamp partition part of my HDD and then installed Windows, which is up and running. The idea was to clone this new partition to the partition on my SSD, but Carbon Copy Cloner let me down. At the moment I see 3 options:
1. Clone the Win partition to the SSD by some other means. I understand that there are other programs such as Clonezilla or EaseUS, but those are either rather expensive or too technical
2. Manage to install Windows cleanly onto the SSD partition (preferred option)
3. Backup MacOS, format the SSD, revert the MacOS installation and pray that Bootcamp will accept it this time. This is pretty much out of the question for me, as Bootcamp refuses to install Windows while both my SSD and HDD are hooked up and I have to keep dis-/connecting SATA cables. Running on a Mac Mini, this is a major inconvenience for me.
I appreciate any suggestions

Thanks, but missing the point.
In the end, I went for option 3, which went fine.

Similar Messages

  • Performance issues with version enable partitioned tables?

    Hi all,
    Are there any known performance issues with version enable partitioned tables?
    I’ve been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
    Tanks in advance,
    Vitor
    Example:
         Object Name     Rows     Bytes     Cost     Object Node     In/Out     PStart     PStop
    UPDATE STATEMENT Optimizer Mode=CHOOSE          1          249                    
    UPDATE     SIG.SIG_QUA_IMG_LT                                   
    NESTED LOOPS SEMI          1     266     249                    
    PARTITION RANGE ALL                                   1     9
    TABLE ACCESS FULL     SIG.SIG_QUA_IMG_LT     1     259     2               1     9
    VIEW     SYS.VW_NSO_1     1     7     247                    
    NESTED LOOPS          1     739     247                    
    NESTED LOOPS          1     677     247                    
    NESTED LOOPS          1     412     246                    
    NESTED LOOPS          1     114     244                    
    INDEX RANGE SCAN     WMSYS.MODIFIED_TABLES_PK     1     62     2                    
    INDEX RANGE SCAN     SIG.QIM_PK     1     52     243                    
    TABLE ACCESS BY GLOBAL INDEX ROWID     SIG.SIG_QUA_IMG_LT     1     298     2               ROWID     ROW L
    INDEX RANGE SCAN     SIG.SIG_QUA_IMG_PKI$     1          1                    
    INDEX RANGE SCAN     WMSYS.WM$NEXTVER_TABLE_NV_INDX     1     265     1                    
    INDEX UNIQUE SCAN     WMSYS.MODIFIED_TABLES_PK     1     62                         
    /* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */                                        
    UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1                                        
    SET z1.nextver =                                        
    SYS.ltutil.subsversion                                        
    (z1.nextver,                                        
    SYS.ltutil.getcontainedverinrange (z1.nextver,                                        
    'SIG.SIG_QUA_IMG',                                        
    'NpCyPCX3dkOAHSuBMjGioQ==',                                        
    4574,                                        
    4575                                        
    4574                                        
    WHERE z1.ROWID IN (
    (SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
    INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
    INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
    t2.ROWID
    FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
    UNIQUE VERSION
    FROM wmsys.wm$modified_tables
    WHERE table_name = 'SIG.SIG_QUA_IMG'
    AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
    AND VERSION > 4574
    AND VERSION <= 4575) j1,
    sig.sig_qua_img_lt t1,
    sig.sig_qua_img_lt t2,
    wmsys.wm$nextver_table j2,
    (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
    UNIQUE VERSION
    FROM wmsys.wm$modified_tables
    WHERE table_name = 'SIG.SIG_QUA_IMG'
    AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
    AND VERSION > 4574
    AND VERSION <= 4575) j3
    WHERE t1.VERSION = j1.VERSION
    AND t1.ima_id = t2.ima_id
    AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
    AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
    AND t2.nextver != '-1'
    AND t2.nextver = j2.next_vers
    AND j2.VERSION = j3.VERSION))

    Hello Vitor,
    There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
    One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
    Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
    Thank You,
    Ben

  • Strange issue with Exchange system

    Hello,
    I'm experiencing a strange issue with one of the Exchange 2013 mailbox servers running on Windows 2012. When trying to upgrade it to the new CU5, I'm getting the following errors:
    Error:
    The local domain needs to be prepared using Setup /PrepareDomain before server roles can be installed.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.DomainPrepRequired.aspx
    Error:
    The Mailbox server role isn't installed on this computer.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UnifiedMessagingRoleNotInstalled.aspx
    Error:
    The Mailbox server role isn't installed on this computer.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.BridgeheadRoleNotInstalled.aspx
    Error:
    An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support Windows Server 2008 R2 SP1 or later and Windows Server 2012.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
    In the Exchange organization there are 2 CAS servers, 2 MBX servers.
    Memento Mori

    Hi Vick,
    Based on my research, I suggest you should upgrade the AD first.
    1. Exchange 2013 CU5 contains schema changes. To upgrade the Schema to CU5 you can execute the following command:
    Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    2. And you also should upgrade the
    Configuration Partition and the Domain Partition with the following command:
    Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
    Setup.exe /PrepareDomain /IAcceptExchangeServerLicenseTerms
    3. After finished above two steps, now you can start to upgrade an Exchange 2013 server to CU5. Open a command prompt and enter the following command:
    Setup.exe /Mode:Upgrade /IAcceptExchangeServerLicenseTerms

  • Bootcamp Issue with headphones

    Hey guys I recently reformmated my Windows Bootcamp Partition, and everything was fine at first until I had an issue with my headphones.
    Sound sounds very muffled and underwater like. Its definitely not the headphones because they work with my ipod and I tried a different headset and those still have that muffled effect. Its not the jack because it works just fine in OSX. I reformatted again and the problem went away, but it just came back a few days later. I tried reinstalling the latest drivers from Bootcamp from the apple website, but alas theres still a problem.
    Does anyone know what to do? Thanks in advance.

    Keiths-MacBook-Pro:~ $ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            249.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data BOOTCAMP                250.0 GB   disk0s4
    Keiths-MacBook-Pro:~ $ diskutil cs list
    No CoreStorage logical volume groups found
    Keiths-MacBook-Pro:~ $ sudo gpt -vv -r show /dev/disk0
    Password:
    gpt show: /dev/disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
    gpt show: /dev/disk0: Suspicious MBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 976773167
          start       size  index  contents
              0          1         MBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640  486812704      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      487222344    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      488491880       1176        
      488493056  488280064      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      976773120         15        
      976773135         32         Sec GPT table
      976773167          1         Sec GPT header

  • Facing issue with adding systems in SMSY - solution manager

    Hi all,
        We are facing an issue with the solution manager in tcode smsy. When i create a system in the corresponding component say ECC with product version ECC6.0.The next screen shows that the <SID> has been added successfully. But when i navigate to the path and i unable to see the system SID which i have created.
       Again i have tried to create the same system with same SID, but it shows that " SID already exists "
       Also i need another suggestion, we have planned to add 60 systems in the same solution manager. Kindly suggest me , how many systems we can add in single solution manager in maximum and for configuring EWA ?
    Thanks
    Raj

    Hi Raj,
    You can delete the old system entry and then try creating the saem again..
    Also while creating mention correct product and version and the installation number.
    You can also use the assistant for this.
    Have you added all your servers and DB?
    regards,
    Raja. G
    Edited by: Raja Gunasekaran on Aug 28, 2009 1:26 PM

  • Any Bootcamp issues with the new MBP? What about right clicking?

    Tried out the new MBP at the Apple store... was wondering how Bootcamp would work with it. I use Bootcamp all the time for work so I'm interested to here the pro's and con's for the new models. Seems like the new trackpad clicking would be cause issues with the "two-finger click" in Bootcamp.

    Right clicking issues galore!
    (at least in the windows side of things...)
    The 64bit windows worked fine....
    The 32bit windows had many issues, even after 2 attempts. (via boot camp)
    The main issue: the functions keys are locked on. Normally, I would hold down "fn" and push "f10" to mute but that doesn't work. All I have to do is hit "f10" and its muted. That is all good until I have to right-click using the "shift+f10" method since the bottom-right-of-trackpad and two-finger-clicking doesn't work whatsover. The "shift+f10" method won't work now since the fn keys are locked on. We have NO IDEA what the problem is. Could it be a driver issue...though it works fine with x64bit and OS X side of things.
    Oh, and mac doesn't give support if one installs Vista and Microsoft won't give support since it isn't on a 'native' pc, so we are screwed. They have both protected themselves and blamed it on the other and the customer is left out to dry.

  • Anyone having login issues with iCloud system preference ?

    have been having issues with Login in to make changes in iCloud system preference. When I click on my icloud account inside systme prefrence it ask me to enter the password , after entering the password still everything is grayed out and cant make any changes. what is wrong?

    Same thing happened. It seems to default to another me.com address I had before changing to the current me.com address. Resetting the default keychain exaxtly does what? Does it also remove all other keychain enties?
    Thanks

  • Bootcamp issue with new iMac

    Hi - I just purchased a new 21.5 inch iMac with Intel Core i7.  I used Bootcamp to partition a new drive, and I installed 32bit Windows 2007 Home Premium.  Everything worked without a problem, until I tried to install Bootcamp in the Windows environment.  It says that "the version of this file is not compatible with the version of Windows you are running".  I searched the forums for similar issues - I tried to re-download the Bootcamp update in OSX; I tried to use the command prompt to go right to the msi file, and nothing worked.  Unfortunately, I cannot connect to the internet through Windows until I instal all the drivers, so I am stuck.
    Does anyone know if the Bootcamp drivers are supported on the new iMac i7?

    Hi, ta know, they don't mention it here, but I'm wondering if 10.8 might not require 64 bit Win7?
    http://support.apple.com/kb/HT4840
    http://support.apple.com/kb/HT3986
    I's not the 3 TB Drive you got is it?

  • Weblogic 9.2 MP3 Issue with EPM System 11.1.1.3

    Hi,
    I am currently running into issues when trying to configure Shared Services via the EPM System Configurator 11.1.1.3. I've installed Weblogic 9.3 MP3 with all of the default options (including establishing Node Manager as a service). I've also created a seperate userId in Weblogic called hyperion (with the password of hyperion) so that EPM can access the instance against the default web server.
    When I run the configurator to try and deploy to application server, the status sits there on the "Starting WebLogic 9 Admin Servers" and does nothing.
    Sometimes is does get past that but then the deployment fails because it is unable to deply the interop.war.
    Any help would be greatly appreciated as I'm 100% stuck!
    Thanks,
    Anju

    The Hyperion EPM forum is here:
    Hyperion EPM
    You'll probably have better luck there.

  • Time Machine Issue with new system board.

    OK MAC Fans here is an issue that I discovered with Time Machine (TM).
    First I have a 17” MacBookPro that has two 1TB external HDs and a 30” monitor attached to it.
    Something happened to my system and the system board had to be replaced.
    The Mac was sent to TX and a new system board was put in it and the very latest OS (10.5.2) was installed on the hard drive.
    The Apple store added my profile so you think everything would be good?
    Wrong!
    None of my applications made it through.
    But I was thinking let just use Time Machine to restore them. WRONG in a way.
    The first thing I did when I got home was set up TM. I pointed TM to the external HD that has all of the previous backup files and TM wanted to backup the system. During the backup I notice that TM created a new directory for the backup files.
    The name of the directory was the name of my MAC. The old directory was also the name of my MAC but with the new OS software release it was stated that you could not use any special characters when naming your MAC or TM may not recognize your backup files (there is a note on this under support).
    The new name is FirstnameLastnameMacBookPro17 the old name was Firstname Lastname’s MacBookPro 17”. TM created a new directory named FirstnameLastnameMacBookPro17 and this was the only files that are visible in TM.
    I deleted the new directory and renamed my MAC back to the old name and TM created a NEW directory with the old name. Now there were 2 directories with the same “old” name. I can not get TM to use the old directory and display the old backup files.
    I was able to drag and drop the files and applications I needed from the previous backup folders back to where I needed them to be so all is not lost but I can not restore files from TM.
    Also I renamed my MAC back to FirstnameLastnameMacBookPro17 and TM automatically changed the name of the new directory to the new name.
    I tried to drag old backup folders from the old TM directory to the new TM directory but received an error that the files can not be modified.
    The only thing that I can think is that when the system board was replaced TM got confused and did not recognize it as the same system. So now I am starting my backup history all over again. The old backup files are good, the only thing is that I have to drag and drop items I want from those folders to the location I want. I can not use the old backup files in TM.
    Dose any one have a magic pill (red or blue) I can take to make the old files visible in TM?

    I decided not to worry about the syncing my TM. I was just at the Apple store and they have decided to replace my MacBookPro. I am going to start my backups on the new system all over again. I know I can drag and drop files that I want from the old files to the new system if I want and that will be go enough.

  • NImDNSResponder and NILXIDiscovery cause issues with VPN & system

    The two windows processes nimDNSResponder.exe and niLxiDiscovery.exe are installed after installing LabView 8.6.  They run automatically in the background, but have negative effects on system performance.  DNSResponder corrupts the routing table, thus rendering Juniper VPN inoperative.  If that process is stopped niLxiDiscovery begins to consume computing resources (>80% of processor time).  If both processes are stopped, the PC & VPN seem to run normally.  I uninstalled and reinstalled LV 8.6, and have the same results - apparently it wasn't a corruption at install.  Can you direct me to the parts of LV that I must un-install to eliminate the issues associated with these processes?
    Thank you,
    ...jerry

    Related Post
    Spex
    National Instruments
    To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

  • USB Connect issues with Infotainment system

    iPhone 6+ with iOS 8.1.2
    Standard Infotainment system in Subaru Outback 2015
    When USB is connected to iPhone, tapping play on infotainment screen does nothing. If I tap play on iPhone, then music plays.
    I have not reset phone (as I have read suggested in other forums).
    Bluetooth connection seems to work ok.

    Hi, Pl4nt5NR4g5.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are unable to control your iPhone via your car controls.  I have experienced this issue myself and forcing all open applications, restarting your phone may resolve this issue.  Make sure to try additional cables as well.  If this issue persists, try the remaining troubleshooting steps in the second article below.  
    Force an app to close in iOS
    http://support.apple.com/kb/ht5137
    Get help using your iPhone, iPad, or iPod touch with your car stereo
    http://support.apple.com/en-us/HT203412
    Cheers,
    Jason H.

  • Issue with common system files for  Sneak Preview SAP NetWeaver 2004

    Hello,
    I am trying to install Sneak Preview SAP NetWeaver 2004 and 7.0 - Full Java Edition with SAP NetWeaver Portal onto my machine.
    On the third step of installation-- install common system files-- I am getting the some error messages and the installation was stopped. Can anyone kindly provide some assistance?
    THANK YOU in advanced.
    Errors:
    INFO[E]    2007-09-10 00:18:17 [synxcuser.cpp:102]
               CSyUserImpl::CSyUserImpl(const CUserData&, bool)
    FSL-01027  Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
    WARNING    2007-09-10 00:18:18 [ianxcreghelper.cpp:235]
               CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
    Error 1307 (This security ID may not be assigned as the owner of this object.
    ) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
    ERROR      2007-09-10 00:18:18 [ianxcreghelper.cpp:482]
               CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
    MUT-03001  Value of type HKeyClass has illegal value '0'.
    ERROR      2007-09-10 00:18:18
               CJSlibModule::writeError_impl()
    MUT-03001  Value of type HKeyClass has illegal value '0'.
    ERROR      2007-09-10 00:18:18 [iaxxgenimp.cpp:736]
               showDialog()
    FCO-00011  The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
    INFO       2007-09-10 00:24:23 [iaxxgenimp.cpp:779]
               showDialog()
    An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
    INFO       2007-09-10 00:24:23
               CJSlibModule::writeInfo_impl()
    Setting ACL of registry entries for SAP system J2E...
    INFO[E]    2007-09-10 00:24:32 [synxcuser.cpp:102]
               CSyUserImpl::CSyUserImpl(const CUserData&, bool)
    FSL-01027  Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
    WARNING    2007-09-10 00:24:32 [ianxcreghelper.cpp:235]
               CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
    Error 1307 (This security ID may not be assigned as the owner of this object.
    ) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
    ERROR      2007-09-10 00:24:32 [ianxcreghelper.cpp:482]
               CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
    MUT-03001  Value of type HKeyClass has illegal value '0'.
    ERROR      2007-09-10 00:24:32
               CJSlibModule::writeError_impl()
    MUT-03001  Value of type HKeyClass has illegal value '0'.
    ERROR      2007-09-10 00:24:32 [iaxxgenimp.cpp:736]
               showDialog()
    FCO-00011  The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
    INFO       2007-09-10 00:24:46 [iaxxgenimp.cpp:787]
               showDialog()
    An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
    Exit status of child: 1

    I am not sure if this helps, but SAP_J2E_LocalAdmin exists in my system as a group not user.

  • Bootcamp issue with Security Update 2014-005.

    My MacBook Pro with Bootcamp won't boot in Windows 8.1 mode after the recent Security Update 2014-005. Any suggestions on how to diagnose and repair the startup.
    I am using a MacBook Pro (13 inch, Mid 2012) with a 2.5 GHz Intel Core i5, 4 GB 1600 MHz DDR3 with a Macintosh HD.

    Keiths-MacBook-Pro:~ $ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            249.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data BOOTCAMP                250.0 GB   disk0s4
    Keiths-MacBook-Pro:~ $ diskutil cs list
    No CoreStorage logical volume groups found
    Keiths-MacBook-Pro:~ $ sudo gpt -vv -r show /dev/disk0
    Password:
    gpt show: /dev/disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
    gpt show: /dev/disk0: Suspicious MBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 976773167
          start       size  index  contents
              0          1         MBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640  486812704      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      487222344    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      488491880       1176        
      488493056  488280064      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      976773120         15        
      976773135         32         Sec GPT table
      976773167          1         Sec GPT header

  • Arch PPC issue with creating bootstrap partition

    On second thought, I'm doing good.
    Last edited by Kebertx (2012-01-13 22:35:32)

    On second thought, I'm doing good.
    EDIT: Didn't want to be a help vampire. Something I recently learned about, and felt bad to identify as.
    So, in case anyone is trying to install Arch on a PowerMac G4, and messed up around the mac-fdisk step, I stumbled upon a thing that you shouldn't do.
    After you hit i to initialize the partition map
    DON'T hit p too early to print the table. You're supposed to enter the full block size. Doing this causes fdisk to believe you are setting up a 4 block partition. The bootstrap partition has to be 64 blocks, so that will just be completely non-working.
    A very simple foolhardy mistake. Forgive me forum, I did not see. That little letter p in the wrong line... nightmarish, now that I look back on it.
    The Wiki will lead you well until you get to the kernel.
    # type name length base
    ( size ) system
    /dev/hda1 Apple_partition_map Apple 63 @ 1
    ( 31.5k) Partition map
    /dev/hda2 Apple_Bootstrap bootstrap 1600 @ 64
    (800.0k) NewWorld bootblock
    /dev/hda3 Apple_UNIX_SVR2 root 31457280 @ 1664
    ( 15.0G) Linux native
    /dev/hda4 Apple_UNIX_SVR2 swap 3072000 @
    31458944 ( 1.5G) Linux swap
    /dev/hda5 Apple_UNIX_SVR2 home 121770544 @
    34530944 ( 58.1G) Linux native
    Block size=512, Number of Blocks=156301488
    DeviceType=0x0, DeviceId=0x0
    For the kernel the wiki is giving you something outdated. When you're installing the base, do this:
    pacman -r /mnt -S base --ignore linux-pmac64 --ignore linux-pmac
    And installing the kernel is like this:
    pacman -r /mnt -S linux-pmac
    pacman -r /mnt -S linux-pmac64
    ^If you are using x64.^
    Am I a helpful community member now?

Maybe you are looking for