Bootcamp, Windows, and Parallels upgrades

Wow...lots of google hits, not much info on this combination of products. There are many hints on how to proceed with individual updates, but not much on how to approach a Loin/Parallels 6/Bootcamp/Windows XP transformation to Lion/Parallels 7/Bootcamp/Windows 7. Here's a few hints.
Make sure that your OSX software is up to date. Reconfigure your virtual machine to not share anything between Windows and OSX.
Start with the Windows Easy Transfer utility to save you XP settings. The Windows 7 install is going to wipe out your bootcamp-partition disk, so get over it. Drop those files on a USB drive (Fat Format). Also make sure that you have or can get install media for any Windows programs you need. To be safe, copy the entire "C" drive to the USB drive.
Let the Bootcamp assistant download and save the drivers for you to that USB drive. Don't let it delete/format the Windows partition or start the install (unless you need to change the size of the partition...then you're stuck with a double install).
Boot as a PC, and try to launch Setup for the upgrade from Windows. If that doesn't work, boot from the W7 install disk. This lets the W7 install see that you have an upgrade (assuming that you have the upgrade license and not a new install). Either way, the W7 install will format your windows partition (make sure you pick the right one). Don't forget to install the Bootcamp-created drivers as soon as the W7 install gives you control of the console.
The install runs, well, like a windows install. Don't enter the license key during the install, but wait for it to complete and run the Activate utility. If it works, great. If not, install again -- this time as an upgrade -- and let it take it's own sweet time again. Once the upgrade is complete, apply Windows updates until you get two successive reboots with no updates showing. You can also recover your settings (the Easy Transfer utility stuff) and install any windows software while you're in PC mode. It's a little quicker that way.
Now back to Mac land. Download and install (and pay for) Parallels 7. When the install completes, delete your original Virtual Machine and let Parallels create a new one. It takes a while for it to reconfigure Windows 7 -- and install the tools. But, when it's done, you're back to having a Windows-based PC as a nice helper app for Mac OS/X (as it should be). You might want to buy some more memory, though.

One additional tip ... don't activate windows until you're done with the Parallels setup. No biggie if you do, but you'll have to do it again after Parallels is done.

Similar Messages

Set up Windows and Parallels on Mac Pro

Can someone please give me step by step directions to best set up Windows and Parallels on my Mac Pro? Right now I am running Lion but will upgrade to Mountain Lion soon.
I want to mostly use Parallels to see how my website runs on PCs.
I have been a Mac/Apple user for 30 years so I know nothing about which version of Windows I need and how to go about setting it up. Do I need to partition my drive? Any other information would be helpful.
thanks, Lisa

You can use any version of Windows, 2000, XP, Vista or Win 7.
I suggest you look for an over the counter OEM version of XP. It will run all currently available Windows software and older Windows software.
It uses less resources then Win 7, Even Win 7 32bit versions.
If you are running a Stock MBP with the normally included 4GBs of RAM I suggest you upgrade that to 8GBs, especially if you install Win 7. Otherwise you may run out of available RAM for both OSs.

Performance Using Windows and Parallels?

We are getting new computers at work and are fighting to stay on the Mac, but we are running more and more Windows apps. How does performance of Windows apps under Parallels compare (relatively) to the old days of running Virtual PC? Seems to me that having an Intel processor would provide a big boost in performance, since you no longer have to emulate an Intel. I'm talking about RoboHelp, PowerPoint, and web-based applications, nothing too graphic or processor intensive.

Unless the Windows software you want to use is incredible CPU intensive, using Parallels or VMWare (or even the free VirtualBox) will probably suit you fine. I use PD and Win7 with a number of applications on a 2011 MBA. The ony time I notice any speed degredation is when Win7 is booting up or coming out of hibernation; once it is running there's no noticable performance hit. I can move back and forth between Windows and the Mac smoothly and the programs run fine. (There is, however a noticable hit on battery life because PD is a heavy CPU user.) BootCamp, because it allows you to run Windows natively, has no affect on the Mac because when you are running Windows in BootCamp you aren't running the Mac OS. With BootCamp you run one or the other at one time unlike PD which lets you run multiple OS versions at one time

Confused with Windows and Parallels

Dear all,
Please can someone help?!
I have a MacBook Air.
I've been able to download Parallels onto my MacBook Air.
But how do I get Windows to work via Parallels? Do I have to do the bootcamp thing for Parallels to recognise it?
A

You have to buy Windows. Having done that, run Parallels and select the option to create a new guest OS. Follow the prompts.

Created second partition in bootcamp Windows and converted whole disk from basic to dynamic

Hi everyone. I don't post here often however I hope the following helps someone else down the road.
I currently user ML and have bootcamp installed. I needed more space on my ML partition so decided to free up space from bootcamp. Going about this completely the wrong way I booted into my bootcamp partition, ran the computer management app and shrank my boot camp partition by 8 GB. This created free unused space which I decided to format over to NTFS with a view to booting back into ML, deleting and adding to my ML partition (how wrong was I).
Prior to completing the format of the newly created free space in bootcamp I was presented with the usual 'yes' / 'no' warning dialogue saying something along the lines of 'formatting this disk from basic to dynamic will prevent any installed operating systems from booting'. I made three monumental blunders at this stage: a) not reading the dialoge box b) completely disregarding the severity of the warning in the diaglogue box c) (you guessed it) pressing 'yes'.
The moment I pressed yes it was the start of a four hour feeling of grief as I thought of the last 6 years of my life wiped from below my nose with no time machine backup.
Upon rebooting bootcamp to get into ML the reality of the situation hit home as no OSX boot, no apple logo, no boot sound, my mac is trying to boot into windows without the option key being held in or warning to present me with a BSOD.
One thought in my mind: "oh Sh*t!!!"
3.5 hours passes and much reading online, learning of linux commands, downloading of linux distros, finding out how to install software and successfully setup a bootable linux usb and I'm typing this up on my mac while I time machine my data away to a freshly formatted external drive. Many lessons learned.
This is what I did amongst the vacating of my bowels and absorption of much nicotine.
There are two pointers to this guide. I was lucky enough to have another computer at hand to conduct the research and create a bootable usb. It a windows 7 toshiba z930. So you're going to need at a minimum: another computer (windows for the guide), a usb stick 2~4GB should be ok.
1) download a linux iso, I downloaded ubuntu, you can download what ever you like, but you're going to need linux (the rest of my mini guide will use ubuntu 13.10 during examples) http://www.ubuntu.com/start-download?distro=desktop&bits=64&release=latest
2) download Universal USB Stick Installer 1.9.5.1 (from now on as UUSI) http://www.pendrivelinux.com/downloads/Universal-USB-Installer/Universal-USB-Ins taller-1.9.5.1.exe
3) plug in your usb drive. make sure there is nothing on it that you need to keep as it will be formatted and lost. also plug your mac into a router connected to the internet. this will help prevent any issues with wireless drivers when booting into ubuntu later on.
4) once the downloads are complete, run UUSI, get past the prompts until you get to the 'setup your selections page'
5) (A) select 'ubuntu' from step 1. (B) browse to your freshly downloaded ubuntu iso in step 2. (C) tick show all drives. (D) select the drive letter of your usb in step 3. tick we will format *drive letter here*. (E) depending on the size of your usb set some persistent storage - I had an 8gb usb to hand so I set 1GB, less will probably do. (F) double check your settings and click create then let the program do it's thing, it can take some time depending on the speed of your usb drive, mine took 10 mins.
6) safely remove the usb and plug it into your mac, turn the mac on and hold the option key, once the usb drive is found hit enter and select ‘try ubuntu without installing’
7) wait for the ubuntu os to load and click the settings icon from the left tool bar
8) under settings click user accounts
9) click the + symbol in the bottom left hand corner
10) select administrator from the account type box and type a name for your account then click add
11) select the account and change the password, then confirm it and click change
12) go back to the desktop and select the power off symbol in the top right hand corner and select your name from the list, this will log you out of your current session and ask you to log in under your newly created login
13) once logged in click the settings icon again from the left hand menu and under settings go to software and updates
14) in software & updates under the ubuntu software tab tick ‘community maintained free and open source software (universe)’ and ‘software restricted by copyright or legal issues (maintained)’ then click close and close the settings window. Also check at the bottom of this window under ‘installable from cd-rom/dvd’ for two entries ‘cdrom with ubuntu 13.10 ‘saucy salamander’ - uncheck on of these entries if both are the same. Not sure if this was just me or a common problem. I found that trying to do the apt-get update would run into errors at the end if one of the entries wasn't deselected.
15) hold ctrl + alt + T to bring up the terminal
16) in the terminal window type sudo passwd root then enter a password for the account
17) in the same terminal window type sudo -i and enter the password given from step 16 if requested
18) in the same terminal window type apt-get update and wait for the update to finish without errors
19) in the same terminal windows type apt-get install testdisk and wait for the installation to finish without errors
20) in the same terminal window type testdisk
21) select create log and then the drive you want to work on e.g. your main apple OS hard disk then select proceed
22) select your file system type - for my ML installation I had to select ‘EFI GPT’ I don’t know if this will be the same throughout all macs / macbooks
23) select analyse, the step should take less than a few seconds and testdisk may report back errors with the partitions or it may proceed to the ‘current partition structure’ screen. If errors are displayed proceed past them until the next screen.
24) at the ‘current partition screen’ select quick search, you will have an opportunity to backup your drive here. I won’t go through this step (never learn) as I did not complete it myself
25) after the searching has completed all the partitions on the disk should be shown. Find your OSX partition using the size reference at the bottom by pressing the up and down keys. Once you have found the partition that relates to the OSX partition that is failing to start hit the right key to make it a primary partition a ‘P’ should show to the left of the partition data. I had to make sure my EFI System and Mac HFS (155GB) partitions were marked as primary.
26) hit the enter key to continue to the next screen and use the right arrow key to select ‘write’
27) the program will warn you it will write the partition table so hit ‘Y’ and a confirmation should be displayed that this has been successful.
28) reboot the computer and remove the USB stick (i removed it at the white loading screen after the reboot, not sure if it makes any difference)
29) allow the computer longer to boot, mine took about 35 seconds to show the apple symbol whereas it normally took between 3~7 seconds before I destroyed it.
30) get into OSX and backup everything to time machine or whatever you use then it probably a good idea to kill off your bootcamp install and refresh your mac from the fresh backup.
Hope this helps someone. I couldn’t find anything conclusive on the net when I ran into problems (all my own fault really for not reading the dialogues correctly) however I used bits from multiple forums and found out parts myself especially the linux parts as I don't know the os at all . Certainly won’t be making this mistake again anytime soon.
Well I’ve had an awful night and have work in two hours but at least the last 6 years of my (now backed up) life is intact and in my hands. I’d rather lose a night of sleep than lose all my data.
Sorry if some of the stuff above is wrong as I don't do this thing on osx / linux at all really. At least it might point you in the right direction.

Hi everyone. I don't post here often however I hope the following helps someone else down the road.
I currently user ML and have bootcamp installed. I needed more space on my ML partition so decided to free up space from bootcamp. Going about this completely the wrong way I booted into my bootcamp partition, ran the computer management app and shrank my boot camp partition by 8 GB. This created free unused space which I decided to format over to NTFS with a view to booting back into ML, deleting and adding to my ML partition (how wrong was I).
Prior to completing the format of the newly created free space in bootcamp I was presented with the usual 'yes' / 'no' warning dialogue saying something along the lines of 'formatting this disk from basic to dynamic will prevent any installed operating systems from booting'. I made three monumental blunders at this stage: a) not reading the dialoge box b) completely disregarding the severity of the warning in the diaglogue box c) (you guessed it) pressing 'yes'.
The moment I pressed yes it was the start of a four hour feeling of grief as I thought of the last 6 years of my life wiped from below my nose with no time machine backup.
Upon rebooting bootcamp to get into ML the reality of the situation hit home as no OSX boot, no apple logo, no boot sound, my mac is trying to boot into windows without the option key being held in or warning to present me with a BSOD.
One thought in my mind: "oh Sh*t!!!"
3.5 hours passes and much reading online, learning of linux commands, downloading of linux distros, finding out how to install software and successfully setup a bootable linux usb and I'm typing this up on my mac while I time machine my data away to a freshly formatted external drive. Many lessons learned.
This is what I did amongst the vacating of my bowels and absorption of much nicotine.
There are two pointers to this guide. I was lucky enough to have another computer at hand to conduct the research and create a bootable usb. It a windows 7 toshiba z930. So you're going to need at a minimum: another computer (windows for the guide), a usb stick 2~4GB should be ok.
1) download a linux iso, I downloaded ubuntu, you can download what ever you like, but you're going to need linux (the rest of my mini guide will use ubuntu 13.10 during examples) http://www.ubuntu.com/start-download?distro=desktop&bits=64&release=latest
2) download Universal USB Stick Installer 1.9.5.1 (from now on as UUSI) http://www.pendrivelinux.com/downloads/Universal-USB-Installer/Universal-USB-Ins taller-1.9.5.1.exe
3) plug in your usb drive. make sure there is nothing on it that you need to keep as it will be formatted and lost. also plug your mac into a router connected to the internet. this will help prevent any issues with wireless drivers when booting into ubuntu later on.
4) once the downloads are complete, run UUSI, get past the prompts until you get to the 'setup your selections page'
5) (A) select 'ubuntu' from step 1. (B) browse to your freshly downloaded ubuntu iso in step 2. (C) tick show all drives. (D) select the drive letter of your usb in step 3. tick we will format *drive letter here*. (E) depending on the size of your usb set some persistent storage - I had an 8gb usb to hand so I set 1GB, less will probably do. (F) double check your settings and click create then let the program do it's thing, it can take some time depending on the speed of your usb drive, mine took 10 mins.
6) safely remove the usb and plug it into your mac, turn the mac on and hold the option key, once the usb drive is found hit enter and select ‘try ubuntu without installing’
7) wait for the ubuntu os to load and click the settings icon from the left tool bar
8) under settings click user accounts
9) click the + symbol in the bottom left hand corner
10) select administrator from the account type box and type a name for your account then click add
11) select the account and change the password, then confirm it and click change
12) go back to the desktop and select the power off symbol in the top right hand corner and select your name from the list, this will log you out of your current session and ask you to log in under your newly created login
13) once logged in click the settings icon again from the left hand menu and under settings go to software and updates
14) in software & updates under the ubuntu software tab tick ‘community maintained free and open source software (universe)’ and ‘software restricted by copyright or legal issues (maintained)’ then click close and close the settings window. Also check at the bottom of this window under ‘installable from cd-rom/dvd’ for two entries ‘cdrom with ubuntu 13.10 ‘saucy salamander’ - uncheck on of these entries if both are the same. Not sure if this was just me or a common problem. I found that trying to do the apt-get update would run into errors at the end if one of the entries wasn't deselected.
15) hold ctrl + alt + T to bring up the terminal
16) in the terminal window type sudo passwd root then enter a password for the account
17) in the same terminal window type sudo -i and enter the password given from step 16 if requested
18) in the same terminal window type apt-get update and wait for the update to finish without errors
19) in the same terminal windows type apt-get install testdisk and wait for the installation to finish without errors
20) in the same terminal window type testdisk
21) select create log and then the drive you want to work on e.g. your main apple OS hard disk then select proceed
22) select your file system type - for my ML installation I had to select ‘EFI GPT’ I don’t know if this will be the same throughout all macs / macbooks
23) select analyse, the step should take less than a few seconds and testdisk may report back errors with the partitions or it may proceed to the ‘current partition structure’ screen. If errors are displayed proceed past them until the next screen.
24) at the ‘current partition screen’ select quick search, you will have an opportunity to backup your drive here. I won’t go through this step (never learn) as I did not complete it myself
25) after the searching has completed all the partitions on the disk should be shown. Find your OSX partition using the size reference at the bottom by pressing the up and down keys. Once you have found the partition that relates to the OSX partition that is failing to start hit the right key to make it a primary partition a ‘P’ should show to the left of the partition data. I had to make sure my EFI System and Mac HFS (155GB) partitions were marked as primary.
26) hit the enter key to continue to the next screen and use the right arrow key to select ‘write’
27) the program will warn you it will write the partition table so hit ‘Y’ and a confirmation should be displayed that this has been successful.
28) reboot the computer and remove the USB stick (i removed it at the white loading screen after the reboot, not sure if it makes any difference)
29) allow the computer longer to boot, mine took about 35 seconds to show the apple symbol whereas it normally took between 3~7 seconds before I destroyed it.
30) get into OSX and backup everything to time machine or whatever you use then it probably a good idea to kill off your bootcamp install and refresh your mac from the fresh backup.
Hope this helps someone. I couldn’t find anything conclusive on the net when I ran into problems (all my own fault really for not reading the dialogues correctly) however I used bits from multiple forums and found out parts myself especially the linux parts as I don't know the os at all . Certainly won’t be making this mistake again anytime soon.
Well I’ve had an awful night and have work in two hours but at least the last 6 years of my (now backed up) life is intact and in my hands. I’d rather lose a night of sleep than lose all my data.
Sorry if some of the stuff above is wrong as I don't do this thing on osx / linux at all really. At least it might point you in the right direction.

Viruses, windows, and parallel 6 -?-

I recently got parallel 6 but am unsure about using it. If I install windows using the program, but don't download any anti-virus software, and I only use internet using the mac system, will the computer be at risk from viruses? Or, if I do use internet using windows, do I need to get anti-virus software for mac as well as PC? Or can I just get it for PC? Thnx

abufarouk wrote:
If I install windows using the program, but don't download any anti-virus software, and I only use internet using the mac system, will the computer be at risk from viruses?
You are always "at risk", but under this configuration, your risk is very, very low.
Or, if I do use internet using windows, do I need to get anti-virus software for mac as well as PC? Or can I just get it for PC?
You do not need antivirus for the Mac under any circumstances. The more you use Windows for internet activity, the more likely you will be to need antivirus.

Bootcamping windows and no internet on windows 8 side?

Hi,
I recently boot camped my 2014 macbook pro with windows 8. I thought I had done everything correctly until I fired up the windows partition and I was unable to connect to the wifi. It appears as if the windows side cannot access the macs built in wifi, which works flawlessly on the OSx partition... Any information on how to proceed?

Then you are going to have to contact VMware. I have found their support to be pretty good. But support is optional with them. If your support has run out, or you did not purchase it to start with, e-mail is all you get. Other tools may also help, remember google is your friend.
A call to Apple will not help (their computer works fine) nor will a call to Microsoft (their OS is working... at least sort of). You have a problem with networking while using Windows on your Mac under VMware.
The only time I have that problem is when I have screwed up the IP addressing on windows. NAT requires IP and DNS to be set to automatic under windows.

How should I install/setup a single OS of windows 7 to run through bootcamp and parallels 7 on my new macbook pro?

I just bought a new macbook 8g ram and 750g harddrive and want to be able to run windows 7 through bootcamp and parallels. How do I setup that up and install a single version of windows (want to be able to utilize heavy programs - photoshop, 3D modeling CAD etc. - by installing them once and being able to use them through parallels 7 or bootcamp)? Please let me know of anything that may red flag by doing this and clear concise instructions of which to do first/ settings for bootcamp and parallels

BootCamp is directly booting your computer into Windows for full hardware access and performance, just like a PC. It's free from Apple.
https://www.apple.com/support/bootcamp/
Virtual machine software (paid) like Parallels and VMFusion both can take the Bootcamped Windows and make a copy for use in OS X in a window at the same time as using OS X, but less performance. It's usualyl easiler to use.
A free virtual machine option is VirtualBox, but it might not have all the bells and whistles of the payware options above, but works just fine.
We can't provide detailed installation instructions, it's too much, you will have to read Apple's instructions and the manual for your virtual machine software.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

Need help with Windows on Bootcamp vs. Parallels

Hello,
I installed windows 7 on a boot camp partition of my hard drive. I also installed windows 7 on Parallels with the same activation key (afterwards).
The activation key is legit, or at least should be, I bought it online.
The issue I'm having after 30 days of use is this: The parallels version of windows is telling me my version of windows isn't 'genuine', I get a black background, but can still use windows and parallels fine.
The boot camp version of windows... (the version I installed first) is running fine, no 'not genuine' messages.
Here are my questions:
1. Am I getting the error because I have 2 versions installed with the same key?
2. The software I need to run is running better on parallels than on boot camp (the interface and resolution look more appropriate and it's just easier to use). I'd like to just delete the entire boot camp partition. Will doing so solve my issue with windows, or should I deactivate windows on that side first?
3. If I should deactivate windows 7 on my boot camp partition, how do I do that?
Thanks for any help.

Thanks for the reply.
I'm not running bootcamp through paralells so I have installed two copies.
Can you tell me what the M$ IVR line is, do you just mean customer service?
Something interesting is that when I checked my code with Microsoft it said that "The product ID number that you entered is not supported in the country that you have selected." Does this ring bells or mean anything to anyone? Does it mean the key was pirated, or just intended for sale in a different country? I bought it from a software retailer online, and I'm assuming it's legit because it runs fine on the bootcamp side. So I'm wondering if this error message could be related to the double install or what?
Can someone provide me a link instructing how to delete the bootcamp partition? Is that a pretty straight forward process?
Thanks

Going from Windows to Mac - Upgrade for Elements?

I have Elements 10 for Windows and am upgrading to an iMac. Can I get upgrade pricing even though I am installing on a new (different) machine?

Yes, you can purchase an upgrade for a different OS than the version you are upgrading from.

Upgrade to OSX Lion – iMac late 2009 – with Parallels & BOOTCAMP Windows XP SP3 (32 bit)

I downloaded Lion just after release and tried to install only to receive the error message “cannot install – no recovery” or words to that effect. I was also not given the option to proceed without creating the recoveryand instead the system was restarted in Snow Leopard.
After potentially giving up and accepting that I had wasted A$31, I tried again 2 months later.
Before I did, I read many forums indicating that Lion could not be BOOTCAMPED with Windows XP. I also found forums saying it could, but only from an older Mac such as mine shipped with Snow Leopard. If you have a newly shipped Mac with Lion pre-installed it appears you must use Windows 7.
First step was to upgrade my Parallels to the new Version 7 from 5. I suggest you do this and ensure that all upgrades are also performed on the Windows side.
Then, the most useful forum I found was the following: http://www.mac-forums.com/forums/os-x-operating-system/245192-installing-lion-no -recovery-error.html
To create the partition,use “disc utilities” and articles on the Apple site if you are unsure how to do it.
You now have 3 partitions: Mac HD, new partition, Original BOOTCAMP.
Now proceed to install Lion, which worked perfectly.
After installation I found that the new partition was also labelled BOOTCAMP. The BOOTCAMP I wanted to use was the 3rdpartition, the original BOOTCAMP.
After no success launching my BOOTCAMP but knowing it was still there, I decided to delete the 2ndpartition and take this out of the equation (make sure you resize your MAC HD partition to take up the empty space this leaves). I’m not an IT expert so it’s possible I don’t have recovery anymore but I did copy Lion to a USB and I have Time Machine doing regular backups.
I also referred to Parallels - http://kb.parallels.com/en/111629. I removed Hard Disk 1 and replaced with HardDisk 1 that seems to direct it to the newly installed Lion. I could not link it with BOOTCAMP as stated in the article.
Once all this was done, it still wouldn’t boot my Windows and I was ready to give up. I left it for a couple of hours to decide whether to reinstall Snow Leopard, then tried one more time with SUCCESS! I think what was happening is that Lion was still busy indexing and that everything took time to catch up. This is my only explanation.
So now everything isworking exactly as before with no issues, very happy I persevered!

If you have not already entered in your wireless providers info, you will need to do that. Just like you did when you entered your network info on the mac side.

Not Again! Window Ultimate Parallels and Bootcamp

I have read hundreds of threads and I don’t want this to be another but I have question that were not specifically answered on not answered at all. I am a life long Windows user and finally made the jump a few months ago. I am a photographer and I have many thousands of dollars in (Windows) software. I considered repurchasing some of them, just keeping an old PC, buying new MAC license for the software that offered it but I have decided to run a dual OS MAC.
Specs:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP55.00AC.B03
SMC Version (system): 1.47f2
System Version: Mac OS X 10.6.1 (10B504)
The big question, Bootcamp or Parallels?
I will use Windows (Vista Ultimate 32bit) for Adobe Master Collection (mainly PS, DW and Flash). I have a few other pieces like Light Room, Aperture and one or two PC only apps. My main uses are minor/moderate .jpg photo retouches/edits in Photoshop and maintain my websites with Dreamweaver.
Questions:
1. With my needs, does it sound like BC or Parallels might be a good fit? (File sharing in mind)
2. What will I see when I fire up the MAC? Will Windows and MAC OS boot at the same time? Is there a choice of what to boot?
3. File Sharing; Can I take an image that I have brought in via iPhoto, edit it in Photoshop and send it back to the iPhoto library?
4. I understand that PS and DW are CPU hogs and not really memory. Is this true and should I take my 2gb of memory up to 4gb?
5..I have seen several comments about a Bootcamp portioned drive being better but no one has explained what that is. Can some one elaborate what that is and is that something done via the Parallels app and if not what is the difference between the Bootcamp partition and what Parallels does?
6.I will keep my online activities on the MAC side except for my ftp transfers for my sites. With this limitation and limited exposure do you think I need to install a virus protection on the windows side? Does loading Windows increase my exposure to viruses?
7.With Parallels, Can I shut down the Windows portion and have it apply all the resources back to the MAC os?
8.I have purchased but not opened Parallels 4.0. I see that 5.0 is out at the same price. Should I go with the new or stick with 4.0 which has been out for a while?
9.For those that say no to Parallels, should I just work with Bootcamp and a jump drive to move files back and forth?
10.Finally, with the specs below, how much space should I partition to carry the load?
*Specs for Parallel:*
Memory Requirements 1 GB of RAM (2 GB recommended to run Windows Vista). Support for any memory configuration (up to 16 GB), without modifying your host system.
Disk Space
Software Installation — 450 MB of available hard drive space for Parallels Desktop 5 for Mac installation (plus space to allocate to your virtual machine).
*Windows Ultimate Specs:* Not sure exactly how much space it eats up.
Min Processor Type: Intel x86 - 1 GHz
Min RAM Size: 1 GB
Min Hard Drive Space: 40 GB
*Adobe Master Collection Specs:*
2GB of RAM (more RAM recommended when running multiple components)
24.3GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)

Questions:
1. Boot Camp. Graphic/processor intensive apps should generally not be run in a virtual environment
2. It will startup in whatever OS you have chosen the computer to boot from
3. Yes
4. Yes..upgrade to 4GB
5. Running Windows through Boot Camp is no different than running it on any other PC...that's why it's better.
6. Of course. Windows is Windows no matter how or what it's installed on. It's still vulnerable to the same viruses.
7. Yes
8. See if you're entitled to free upgrade to Parallels 5
9. That's your call. Nobody can make that decision for you.
10. Depends on how big the hard drive is.

Can Bootcamp and Parallels share the same Windows applications and data?

I'm looking at getting an Intel iMac which will let me throw away my old PC - Yeah!
I will have a couple of Win apps that I will need to hang on to (Quicken - Quicken for Mac is horrible, but that's another tghread). Anyway, can Bootcamp and Parallels share the same Windows applications and data?
My thought would be to allow my wife to access Quicken from Parallels and not have to reboot. She will only need lightweight access and the overhead of running virtualization wouldn't impact her. I, on the other hand, would want to occasionally boot natively into Windows and run the same application with the same datafile. Is this possible?
Thanks and looking forward to joining the MacIntel world!

Thanks for all of the freplies. I suspected that BootCamp and Parallels could not shar ethe same partition, but wanted to verify. To address some of the other posts:
Re: Quicken vs MoneyDance - I looked at MoneyDance a while back and while it is comparable to Quicken for Mac, it isn't comparable to Quicken for Windows (ergo, Quicken for Mac isn't comparable to Quicken for Windows!). But, as I said, that is a topic for another thread!
Re: Using Bootcamp/Parallels for only one app: I actually have several apps that I still need access to on Windows. I work with many business applications than only run/are supported on Windows as well as receive some complex Office documents which Office for Mac cannot handle. Quicken (for Windows 2007) was just the best example of a consumer app where I could see wanting access from both OS X and Windows.

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Is it dffernet to install windows through parallels and use bootcamp ?????

I've used to bootcamp install windows , Can i use parallel to use it

If Parallels will run okay with Panther then you can install Windows into it. Parallels runs like a native Apple program on your desktop. Windows runs in Parallels the same as it would in Virtual PC. If you use bootcamp then you are setting up your Mac to dual boot Windows or the Mac OS. I have tried both and Parallels is way more convenient.

Bootcamp, Windows, and Parallels upgrades

Similar Messages

Maybe you are looking for