Both Side Printing in HP printer photosmart 5510

I have a Macbook running on lion 10.7.3 and i can't figure out how to print on both sides of the paper in my hp photosmart 5510 printer. Is there no driver that I can download so that the printer does it automatically ? I'm confused I think it is such a waist of paper if you can't print on both sides.

Hello,
The Photosmart 5510 hardware does not provide Automatic Duplex functionality as you may find listed by the spec below:
http://www8.hp.com/uk/en/products/printers/product-detail.html?oid=5063600&jumpid=oc_r1002_uken&lang...
Manual duplexing can be done by any of the methods below:
Method one: Perform manual print duplexing using the Page to Print setting:
In order to perform manual duplexing, you shouls use the Pages to Print setting, as you may find listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01663233&tmp_task=useCategory&cc=us&dlc=en&lang...
Method two: Using the Two-Sided Printing application:
http://ftp.hp.com/pub/softlib/software12/COL35975/mp-88750-2/HP_Two-sided_Printing.dmg
You can access this tool by clicking the PDF button at the bottom of the print dialog, then select Two-Sided Printing and follow the on-screen instructions.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Both side print not working in network using windows 7

                           I have HP laserjet 1018 printer,Printer connected in windows 7 system.
          When i print both side print in same system is work done,but in network not work both side print,single print work good.i need help to solve this

Hi Dinesh_G,
Sorry for the delayed response. Try adding an alternate driver. Here is a link that will provide steps for that. Click Here Check which PCL driver you are currently using and add the alternate (PCL5/PCL6). Please see the below for additional clarification.
Utilize the above link for exact steps on adding the driver.
1. Check which driver currently used-PCL5 or PCL6-this will be located near name of driver in print folder or print properties
2. Follow steps provided in link to add whichever one the currently installed driver is using
     A. Select HP as manufactuer
     B. Select HP universal printing PCL 6 or HP universal printing PCL 5
3. Attempt duplex print job
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Problem while both-side printing

Hi ,
I develop a specif form for a customer. In my form i got 2 main page, the first one should appears only one times and the second one should appears many time as necessary. That works fine.
Now i want to insert between page1 and page2 a new page let's call page3 where there's only static text like Terms and Condition . I should also insert this page after each page 2 .
The result should be :
Page 1
Page 3
Page 2(1)
Page 3
Page 2(n)
Page 3
So in the designer i insert the page 3 between page 1 and 2 . In the dynamic part of page 1 i set next page to page 3 . In the dynamic part of Page2 i set that on overflow go to page 3 .
That works nearly fine , i got page 3 between each page 1 and 2 , but after the last page 2 i don't have page 3 .
Does somebody face the same requirement and how does it solved ?
Regards.

instead of print both sides, print odd page first, flip over the page, then print the even page. yellow blink light on the printer means that the other side is ready, just reinsert the paper with other side up and press continue on your computer.

Laserjet 1018 both side printing WinXp SP2 problem

Hello I hope this is the right section for posting this , if not I apologise in advance. I run WinXp SP2 with a Laserjet 1018 printer installed and I need to print a document with 2 pages per sheet and I used the Print on both sides option (to save paper). When the first half of the print job is done the warning led (with the exclamation mark) goes on and I don't get the continue option (mentioned in the manual). i have tried reinstalling the drivers but with no luck. I can do normal print jobs with no problem though.

Hi
You can try running the following utility at the link below. It sounds like a network issue since you are able to print fine when you give the users admin rights.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02726548&cc=us&dlc=en&lang=en&lc=en&product=439...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

SMART FORM Both side printing

Hi,
I need help in printing smartform in both side. it has to print terms and conditions on back side of page after printing main window for each page.

Hi Praveen,
Try this logic!!!
Create total 3 pages. For example
Page 1 (items page)
Page 2 & page 3 (terms & conditions)
page1 (next page) = page2
page2 (next page ) = page1
page3 (next page) = blank
Now In your main window in page 1, just after the table create a command and give next page as page3.
I hope this will help you to close this thread.
Appreciate if found helpful.
Cheers!!!!
Vinit
Edited by: vinit005 on Mar 12, 2011 11:01 AM

My printer,(photosmart 5510 series), refuses to copy

My printer used to copy when I pressed the touch-screen button; now it doesn't. I've checked all that I can think of but, still, no joy. Help!

Hi @wellsgreen,
Welcome to the HP Forums!
I understand that you cannot copy with your HP Photosmart 5510 printer. I am sorry to hear this, but happy to look into this copying issue for you!
A few questions for you, if you do not mind:
What happens when you try to copy?
Do you see any error messages?
Does the paper go through at all?
Does the paper come out blank?
Are you low or empty on any of the ink cartridges?
In the meantime, please see this guide, Vertical Bands, Lines, or Streaks in Copies or Scans. (Even though the guide title may not match your issue, I believe the solutions will help).
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Black and white printing Photosmart 5510 Windows 7

How can I set my Photosmart 5510 printer to print in black and white? I'm used to seeing that option on other printers. Also can I change that setting from my PC remotely? I am connected wirelessly.

Are you trying to print a photo in black in white or just a regular document ?
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Both Side Prints

Dear Gurus,
Right no in SAP we take Purchase order printouts. This prints comes on single page only.
Can anything be done to print matter on both sides. We have printer capable of double side prints

Hi
Have you defined printers in SAP and using them.
If so you can maintain this setting for the printers created in SAP
In the Output attributes tab of the Output devices you need to maintain the print mode as duplex: Print on both sides.
If you are using a default printer, then set the settings in the Local default printer and set the print mode to Default: Printer default setting.
SPAD is the transaction for doing these changes, usually maintained by BASIS person, you can take help of them
Thanks & Regards
Kishore

Both side printing problem

I use Jasper in Swing applications as a means for generating reports.
When generating multiple pages report I set in the Printer Options "Print on boht sides/ Landscape" (rotation of the page along the left border of the paper).
Jasper prints on two sides with rotation along the upper side of the paper. And on the contrary, when asking to print along the upper side, it rotates the text along the left side.
I checked the printer driver by specifying the same parameters when printing Word documents. Everything works correctly in this case, and the rotation is performed through the desired part of the paper.
Would somebody please help me?

ricardo,
understanding your question correctly, i assume you want to start the instances of your main repeating frame always on an odd page (e.g. 1,3,5,7,9) resulting in printing on the facing page in duplex printing.
you can do this by putting an object on the beginning of your block (e.g. a white line) and create a format trigger, that shows this object only on even pages. then you specify the page-break before property.
what happes is, that the first object that is formatted on the first page of each repeating-frame instance will be this object. if it happens to be on an even page (back of the physical sheet of paper), the object is formatted but before that a page-break is performed, hence the object will end up an an odd page (=facing side of the physical sheet of paper). in case your instance happens to be formatted onto an odd page, the object is not formatted and the page-break is not performed.
regards,
philipp

When I first installed my HP 7510 All in one it would automatically print both sides not now

When I first installed my HP 7510 onto my HP Pavillion Slimline it would print both sides automatically and wait for the ink to dry before taking the paper back in to print the other side. Now if I want both side printing I have to take the paper out manually and reinsert it.. I am running Windows 7

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

About HP envy 4500 printing for both sides for mac os x 10.9.4

I got the printer recently. I have installed the lastest software and set up air print successfully. I was trying to print out mt notes for both sides of the paper but I did not see the " print both sides" option. I looked up the old post in the forum and tried to follow the set up step by step, but it is still not working. Can anyone tell me how to set up the both sides printing option.
Thank you so much.

Hi @chloe_chie,
Welcome to the HP Forums!
I understand that you are wondering how to print on both sides with your HP Envy 4500 on your Mac OS X 10.9.4, and I am happy to help!
Please make sure that the correct driver has been selected on the Mac. Meaning, it should read HP Envy 4500, not the Airprint driver.
To do this go to the Apple Icon, System Preferences, then Print & Scan and look for the images below:
Once we have verified that we have the correct driver selected, then please follow through this guide, Printing on Both Sides of the Paper (Duplexing) for HP Deskjet 3540, 4640, ENVY 4500, and Officejet ....
Hope this information helps, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How to disable "print on both side"

I installed adobe reader 10.1.2, and found when I printing ,the default setting always print on both side, how to disable that by registry file or other ways?
My printer has both side print function but we did not set up this as default.
why I hope disable this by registry file is I have over 500 users, I hope i can do it by .bat file.
any idea?
Thanks,
Ant

Hi,
Please refer to the following KB article and the forum link for the solution on the duplex issue and registry keys for the same,
http://kb2.adobe.com/cps/928/cpsid_92870.html
http://forums.adobe.com/message/4161507

Automatic Double Side Printing

Here is HP LaserJet Enterprise 600 Series Printer manual check page 117 for settings with screenshots how to set up automatic both sides printing.

Hi Team,
I am using an HP LaserJet Enterprise 600 Series Printer, can I print on both sides automatically without manually feeding the paper back into the printer? If so print share some of the step to achieve that and also assist me with a video link if there is any.
Thank you.
This topic first appeared in the Spiceworks Community

Photosmart C6280 not printing color/both sides with Mac

Hello HP Community,
I have a Macbook Pro running iOS X 10.9.2 and a AIO Photosmart C6280. I am have downloaded the printing/scanning software and drivers. Everything installed without problem. I have also scanned with no problem. However, no matter what program I am trying to print from on my Macbook, the printer will not print in color and also will not print on both sides - even when the double sided feature is checked off.
I have been to all the discussion forums of relevance and can't find anyone with my same problem. Those that have similar problems, are running different versions of iOS and the steps suggested they take are not possible with this version. Please Help!

Hello HP_USER,
Welcome to the HP Forums.
I see that you're unable to print in color from you Mac 10.9.2. I will try to help you with this.
Have you tried making a color copy from the printer? If not please do so, this is to see if the printer is having the issue stand alone.
I would also recommend looking at these documents:
Missing, Faded, or Dull Colors
Wrong Colors
As for it not duplexing, according to the User's Guide, this printer doesn't duplex as in it doesn't have a duplexer. If you are manual duplexing that would be slightly different, as it requires you to be flipping the page after the first side has come out. This document can assist you with that: Print on Both Sides of the Paper (Manual Duplexing)
I hope this helps you out, thank you for posting on the HP Forums.
I worked on behalf of HP.

CAN PHOTOSMART 5510 WORK IN BOTH MODES-USB AND WIRELESS TO PRINT FROM I-PAD OR I-PHONE 4S.

CAN PHOTOSMART 5510 WORK IN BOTH MODES-USB AND WIRELESS TO PRINT FROM I-PAD OR I-PHONE 4S.

SEPPLES86,
In order to print from your I-Pad or I-Phone you would need to be connected through wireless. Air Print works when your printer and device ( ipad or iphone) is connected to the same WI-FI network.
Here is a link to a post with a lot of good information concerning Air Print.
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/AirPrint-how-to-use-Apple-s-AirPrint-solution-...
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Both Side Printing in HP printer photosmart 5510

Similar Messages

Maybe you are looking for