Bottom and right with getwidth or getheight

I need to get the size of a button in a applet I am building the problem is that when I use Button.getHeight() IE 5.0 throws a java exception. Are there any other ways I can do this? Other then getheight and getwidth.

getSize().width, getSize().heigth

Similar Messages

  • Half frame rendered black- as if a mask cropped the bottom and right side

    Here's a mindboggler. And I'm sure it's totally my fault... Newbie here... I know I can go back and redo this in 2k but wondering if anybody has an answer that can save me days of work...
    SO, I shot on RED, edited in pro-rez HQ, uprezed with Redcine to 3k prorez for FX- applied FX in AFX then rendered back to 3k. Compiled back in FCP then sent to Color... I found out then that Color can't work with 3k, so I changed my FCP comp to 1920X1080 and scaled the 3k images down to fit (in FCP). Resent to color and everything seemed fine. I did grading in color and rendered. Everything seemed normal until I looked at the renders out of color. The frame size is correct but the image looks like it has a backwards L across the bottom and right side of the frame. As if the geometry rendered only the top part of frame. I check the Geometry room and everything's normal.
    Anyone know why it looks fine in Color but when rendering it comes out like this?
    Thanks so much in advance.
    Tim

    What was the resolution setting sent to COLOR by FCP? In the "Send" roundtrip, all Geometry settings are ignored by COLOR in the render stage.
    jPo

  • Swipe left and right with magic mouse doesn't work in safari

    Hey there,
    I accidently deleted something in the navigation bar in safari.
    Now when i swipe left and right with my magic mouse, it doesn't go to the previous pages anymore. But the wierd thing is it still works with my magic trackpad.
    And even wierder the swipe left and right of my magic mouse still works in other programs.
    So can anyone help me with this?
    Thanks in advance!

    Check Gestures in System Preferences > Trackpad
    It's working here on Safari 7  /  v10.9 Mavericks

  • InDesign Showing white line on bottom and right sides

    I made sure that my design overlapped for bleed however when exporting to a PDF file it's showing a white line on the bottom and right of the design. I double check to make sure there is overlap and it's still showing up. I have tried searching to see if anyone else has had this issue but no luck.
    Any ideas?
    Thanks in advance!

    Never mind... just got an email from InDesignSecrets that answered my problem. Rookie mistake. It was the fact I did not select the use document bleed settings on export.
    Thanks for the help!

  • Can I typeset Chinese in InDesign CC? The text goes from top to bottom and right to left.

    Hi!
    Can I typeset Chinese in InDesign CC? I have downloaded the Chinese version of InDesign CC, but couldn't get the text to go from top to bottom and right to left. Do I need to download some sort of plug-in for this type of work?
    Thanks!

    There's little to nothing Adobe Reader can do about this.
    The free Adobe Reader cannot create PDF, cannot export PDF page content and cannot manipulate PDF page content.
    What is "on" a PDF reflects what was "printed" to PDF from back in the authoring file.
    It is within the authoring file where you must make adjustments.
    A related "source" issue is what label stock is specifically supported by the authoring application.
    While all vendors claim their stuff is alway the same as your stuff that is often not the case.
    A 1/64 th of an inch or less difference will put a wooden shoe in the works.
    Be well...

  • Greyish puffs on bottom and right edge of display?

    I started to notice some greyer areas along the bottom line of the display as well as on the right side: Have any of you noticed the same defect and, for that matter, returned the machine as a result? It's a soft, grey area like a stain.

    Kane,
    I'm going to chime in with Alan and say that what you're describing is normal. Like Alan stated, "slight compression of the screen where it's mounted to the lid." I'm sitting here on a PB G4 12 in. with what you're describing (color varies depending on background). You'll notice it most on a lighter background/window.

  • When playing games such as Cityville, Farmville etc. I never get the complete screen. The bottom and right side are cut off

    When I open these games, parts of the game screen do not show up.If I click for full screen in Farmville it all shows up but in Cityville I can't click for full screen because that part of the screen is missing. If I open these games in IE. the whole screen shows up.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • BitmapData.draw() and displayobject with 3D transformations

    Hi all,
    I have a sprite with some objects in it which are transformed in 3D (positioned and rotated). The objects form a coneshape in such a way that the objects that make up the back are hidden.
    When I use that sprite as a source for the bitmapData.draw() it is drawn from another viewpoint so it seems. In my case the copy is viewed slightly from the bottom and right.
    Bottomline:
    Does anyone know of a way to duplicate the image of a sprite which contains 3D manipulated graphics?
    thanks in advance,
    Manno

    Nevermind:
    var pp:PerspectiveProjection = new PerspectiveProjection();
    pp.projectionCenter = new Point( 0, 0 );
    sphere.transform.perspectiveProjection = pp;
    Where sphere is the object to use as a source in the draw method. It seems OK now it has it's own perspectiveProjection set.

  • Adobe Pro X - cutting off bottom and sides of document

    Hi. 
    I had to convert a word doc to a PDF (I managed that)
    I then had to put a video in the PDF - so I installed Acrobat Pro X to do this
    However, since getting Acrobat Pro X, the bottom and sides of the document have been cut off, and there's a white border along the bottom and right hand side.
    I can't uninstall Pro as I need to put videos into the PDF, but I can't submit PDFs with the bottoms and sides cut off either.
    Please please can somebody help me?
    Thanks so much

    Go back to the original WORD document and convert to PDF using either the Adobe PDF printer or PDF Maker (Adobe menu item in WORD). If that solves the problem you are fine. If not, then give us details on how you did the conversion.

  • Bottom and righ of frame cut off in IE but not in Chrome?

    Hello,  this is just happing on my computer and I do not know how to fix.  When I run one of my captvate projects in Internet explorere 9,10 or 11 the bottom and right side of the frame is cut off.  I have the shell set to 1024x768 and I also set it to 800x600 and the same thing is happing.  I ran the course in chrome using the HTML link in the folder and it ran fine.   I have IE11 on my test computer and it is working there too.  Any Ideas or updates that Microsoft may have done that I could be missing or need to change.
    thanks,
    Marty K.

    Sounds like you just need to clear the cache in Chrome.

  • I format a cell with a double line at the bottom and it appears until I move to another cell and the formatting is lost.

    In Numbers, I format a cell with a double line at the bottom and it appears until I clik on another cell and then it disappears.

    When you describe the "double" line are you talking about something like this?
    If so this is only selecting an edge of a cell.  You still have to select:
    1) Line style using the menu to the right of the one I have circled (currently  "Thin")
    2) Line width using the menu to the right of the previous one and, finally,
    3) the line color using the menu to the right of the previous one
    Even so I have not found a way to copy cell border formatting so I ALWAYS wait until the very end to add border formatting.

  • Windows bottom corner left and right edges are not rounded

    Hello,
    I have an issue with my macbook pro retina 13inch.
    The left and right bottom corner are not rounded like they are supposed to be, I can see the pixel.
    They do not always appear so it is not a display problem (dead pixel) but a software problem.
    For example with full screen mode in safari sometimes they appear sometiems they do not.
    A clean install of my mac did not solve the issues.
    Here is a picture to explain the issues :

    Hello Dominic,
    It is not normal.
    Sometimes my windows are rounded the way yours are and sometimes they are not.
    Click on the picture of my post to zoom and see the problem.
    Here is another screenshot, this time with a windows which has no issues :

  • Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

    Firefox upon opening an image in a new tab, centers the image from top and bottom and surrounds the image with a grey frame. Just started having the problem today, searched Google to no avail.

    Oh wow, looks like a new feature.
    The "page" links in a stylesheet with the address "resource://gre/res/TopLevelImageDocument.css". If you remove that reference, then the image displays in the old style.
    '''''Edit: Please skip the rest of this post and check out the next one.'''''
    There might be a more elegant solution than that, but you could use a bookmarklet to strip out that link when you want to view the page in its old style. A bookmarklet is a snippet of JavaScript you save on the Bookmarks toolbar for quick access.
    First, copy the following code to the clipboard (it's all one long line):
    <br>javascript:var ssheet=document.querySelector('link[href="resource://gre/res/TopLevelImageDocument.css"]'); if(ssheet)ssheet.parentNode.removeChild(ssheet); void 0;
    Next, if you are not displaying the Bookmarks Toolbar, use View > Toolbars > Bookmarks Toolbar to display it. (If you aren't using the classic Menu bar, press Alt+v to call up the old View menu. Right-clicking the gray area just below the page address also allows you to display the Bookmarks Toolbar.)
    Right-click on the Bookmarks Toolbar (or Mac equivalent of right-click!) and choose New Bookmark.
    Paste the code into the Location box (the second box).
    Then type a useful name in the Name box (e.g., Oldstyle Picture) and click Add.
    Now, when you want to tweak the image display, click the button to run the script.
    Manual clicking is a hassle, so it might make sense to look into other solutions. (Greasemonkey didn't seem to work; I think it might not run on .jpg files.)

  • How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns.

    How to adjust the green (starting) and the red (end) rectangles pixel by pixel (top, bottom, left and right) by changing the number of pixels in ken burns. Help please.

    If you look closely at the top of the canvas pane, as you move either of the boxes (green or red) there is an indication of pixel positions... "top, bottom, left, right," and "scale."
    Admittedly, it doesn't seem as if you can "enter" the dimensions with your keyboard, however, as you move the boxes, you have a real time indication of the boxs' locations.
    (I couldn't take a screen shot, as you have to actively move the box with a mouse or other input device... thus, I could not also take a screen shot with same device.)
    I hope this helps.

  • I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

    I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?

    Your TV hasn't entered some odd picture in picture mode has it with  two 'inputs' side by side?
    AC

Maybe you are looking for

  • Error message when syncing Itunes with Ipod

    I bought a new laptop and it has Vista. I have downloaded Itunes 8 and updated QT. When I try and update my Ipod it wants to delete all files and replace as it used to be synced with my old PC. I get part way through and get an error message -1303 an

  • How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

    Hi I have  Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate

  • Why can't I set my iPod to shuffle songs within a playlist?

    My iPod 160 GB Classic runs version 2.0.4. My iPod Nano (version 1.0.2) has that feature. In settings I've set shuffle to "songs".

  • Problems Migrating from iPhoto 6 to 11

    I'm moving from an older Macbook Pro to a brand new one, and used Migration Assistant to help get everything moved over. iPhoto 11 on the new machine found most of my photos but there were some anomalies. I'm wondering if anybody can shed any light o

  • Using SAMPLE with a WHERE clause

    (Oracle 9iR2) I am using the SAMPLE keyword in a SELECT statement with a WHERE clause. Is the sample extracted before or after applying the WHERE clause? For example, if I have the statement: SELECT emp_id FROM employees SAMPLE(10) WHERE salary > 500