Bounced messages are returned to all people in an email list

I have a distribution list called "members", with about 40 people, that include contacts that are mostly external to our company. External senders can send to this list.
I sent out a message from an account that i have at gmail. this was sent to the MEMBERS distribution group on my companies exchange server. From there, it gets sent through a SmartHost server, MXLogic (or McAfee Email Services or something like
that) that provides virus scanning/spam scanning. One of these SmartHost relay servers was blocked by Microsoft, and it caused several of the recipients to be blocked, causing a "failed delivery, this IP is blocked" email to come back.
However, instead of just informing me, the sender, this was returned to everyone on the distribution list.
Why?
If I sent the message, why would the email server decide it needs to notify everyone on the distribution list?
50% of the time half the stuff you read is only half true.

Why would the email bounce to everyone? a failed delivery report for the specified emails should come back to the exchange server, but it should only notify the sender, not everyone. Is Exchange not intelligent enough to recall who sent the
original message, and thus just sends the non-delivery to everyone? I find that very hard to believe.
50% of the time half the stuff you read is only half true.

Similar Messages

How to send a text message to a group of people and save the list for next time?

how to send a text message to a group of people and save the list for next time from an iphone 4s?

Hey there ipremacha,
It sounds like you need to enable Text Message Forwarding on your iPhone for your iPad to send MMS/SMS messages through your phone.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Thank you for using Apple Support Communities.
Regards,
Sterling

TS3274 Why can't I send text messages to some of my people in my contact list?

Why can't I send text messages to some of my people in my contact list? What do I have to do?

You can send imessages to anyone who is using an Apple device (recent models).It will try to go via wifi but if it can't then it will try to send as an SMS and for that you need cellular capability.
Does your iPad have cellular capability? If not then you can't send to non-Apple devices through iMessage.
Hope this helps a bit.

TS4268 My text messages are being sent and received with my email address instead of my phone number. How do I fix this?

My text messages are being sent and received with my email address instead of my phone number. How do I fix this?

This is with iMessages only.
Go to Settings > Messages > Send & Receive and below the Start New Conversations From, select your cell phone number instead of your Apple ID email address.

When sending emails with cc copy recipients, header does not show the cc copy email adds it was sent, but, messages are received by all. whats wrong?

Our office email add experiencing this problem just the other day. Our email hosting provider havent found the solution yet despite my frequent follow ups.
Our business partners in Malaysia are already complaining because, suddenly email heading formats changed. Emails they receive from us (we are using the orange outlook express and mozilla thunderbird) when received by them, doesnt show the Cc addresses to whom we sent the email to. But, it is confirmed being received by all, their email adds appearing only in "To:". They are now confused, thinking that we are not cc copying all concerned parties in our emails but in fact we are. We have done test messages and still same problem exists. Hope anyone could help. Thanks in advance!

Confirm your headers are correct:
when you view a 'Sent' email in Sent folder
It shows headers TO and CC with email addresses
When you click on 'Other Actions' and select 'View source'
It says something like this:
'''From - date here'''
X-Mozilla-Status: 0001
X-Mozilla-Status2: 00800000
X-Mozilla-Keys:
Message-ID: info
'''Date: date here'''
'''From: sending email address'''
User-Agent:...Thunderbird/31.4.0
MIME-Version: 1.0
'''To: email address'''
'''CC: email address'''
'''Subject: subject title here'''

How come after the upgrade to iOs 6 my text messages are being sent to people that I am not even sending them to!

So I updated to iOs 6 (4s phone) and today all the text messages I received were also sent to my son's 4s as well (he is on iOs 6 now too) ***??? Can anyone help me out on this one?????

Did you by chance give your son your old iphone 4s and activate a new iphone 4s? If so, you may need to contact your carrier or wait the period of time required for it to finally switch.

I'm running xp and all my facebook pages are blank. [ all white ] i have emailed facebook and they said that it is because i'm using firefox. could this be true? none of my family has this problem.

almost every time i go to facebook the pages are all white. [blank]

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Message area help

I am using message area to display all the mesages/errors that gets generated in a single webdyn pro java page.
i have set the property of message area to display 1 message only, and now if more than 1 error is generating then , it shows footer also.
but i want to have a button there "Show all messages" and on click of it , i want to display all the generated messages in a pop up window.
can anybody suggest how to achieve it ?
thanks in advance
kaushik

Hi Kaushik,
Use the following code to cretae model window:
IWDWindowInfo windowInfo =(IWDWindowInfo) wdComponentAPI.getComponentInfo().findInWindows("Popup");
IWDWindow window = wdThis.wdGetAPI().getComponent().getWindowManager().createWindow(windowInfo, true);
wdContext.currentContextElement().setWindowInstance(window);
window.setWindowPosition(WDWindowPos.CENTER);
window.open();
Try this also,
https://media.sdn.sap.com/javadocs/NW04/SPS15/wd/com/sap/tc/webdynpro/services/session/api/IWDWindowManager.html
Regards,
Ramganesan K.

All the contents of email gone

Hi all,
All the content of my old email messages are now blank... The email subject is there but when I click on it, its blank. What happened? I'm running the imap account on Gmail.

Hi all,
All the content of my old email messages are now blank... The email subject is there but when I click on it, its blank. What happened? I'm running the imap account on Gmail.

Why are there multiple keychain records for same email account?

I have noticed that it takes sometimes up to 45 seconds for Apple Mail to send (whoosh...) an email. Then I started getting an alert asking for my password intermittently.
I checked my KeyChain Access and note 5 records for this email account dating back to 2007 and while the password hasn't changed in all these years, I note the "Where" field is different in some of these records. So my uneducated hunch is Apple Mail is getting a little confused and having to go thru all 5 records insteads of just one.
As note multiple records for other email accounts and website logins I have.
1. Why is this happening?
2. Is it normal
3. Can I, should I, delete all but one for each item be it an email account or web login, etc.
or
Should I delete all 5 and let a brand new one be created for Keychain next time I send or get email for this particular email account?
I also see there is some info on keychain syncing. Does this have anything to do with my situation?
Thx,
Steven

I'm a little distracted with Steve's passing. He will be missed to say the least
But if it isn't too disrepectful to reply at this time, I'm unclear with your advise because there are 5 items all for the same email account. A couple are duplications, and the others have slightly different "Where" info.
I can't imagine I need all 5 and wonder if I should delete 4 and keep the newest one?
All my email accounts have multiple entries.
Anyone know why this is happening and if it's OK to delete the oldest ones and keep just the newest?

Aur-general "You are not allowed to post to this mailing list"

I found a font I needed a few days ago that I couldn't find in the AUR, so I made a package and threw it up on the AUR. A few days later, when I realized I didn't even end up installing it after the packaging, I searched for it to download and install it, only to find there was a package of that font from half a year ago, so I figured I'd go report my package for deletion.
The AUR wiki page states that removal requests should be emailed to aur-general. When doing this, I get an automated response from aur-general-owner stating:
"You are not allowed to post to this mailing list, and your message has
been automatically rejected. If you think that your messages are
being rejected in error, contact the mailing list owner at
[email protected]"
How do I get permission to send my removal request? And if getting permission requires something not so easy, could someone forward the email for me?

https://mailman.archlinux.org/mailman/l … ur-general did you read this?

Some emails are not delivered, also not in LOG, no Bounce message

I am Using Mountain lion server with the server app installed.
Not the strange thing is that a lot email is not delevered to my email clients, but some are.
The email that is having problems is [email protected]
Does anybody know how to debug where the email is, that is not deliverd?
Let me explain a strange situation.
When I sent a mail true wetransfer.com from [email protected] to [email protected].
I recieve the message on info@, that is is successfull delevered at test@.. but never recieve the mail at [email protected]
Here a part of the logs:
2E673904CBB: message-id=<[email protected]>
Jan 5 15:27:52 server.mydomain.nl postfix/qmgr[4178]: 2E673904CBB: from=<[email protected]>, size=18104, nrcpt=1 (queue active)
Jan 5 15:27:52 server.mydomain.nl postfix/smtpd[4224]: connect from localhost[127.0.0.1]
Jan 5 15:27:52 server.mydomain.nl postfix/smtpd[4224]: AB6E8904CD0: client=localhost[127.0.0.1]
Jan 5 15:27:52 server.mydomain.nl postfix/cleanup[4221]: sacl_check: mbr_user_name_to_uuid([email protected]) failed: No such file or directory
Jan 5 15:27:52 server.mydomain.nl postfix/cleanup[4221]: AB6E8904CD0: message-id=<[email protected]>
Jan 5 15:27:52 server.mydomain.nl postfix/qmgr[4178]: AB6E8904CD0: from=<[email protected]>, size=18770, nrcpt=1 (queue active)
Jan 5 15:27:52 server.mydomain.nl postfix/smtp[4222]: 2E673904CBB: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.64, delays=0.43/0.01/0.01/0.19, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as AB6E8904CD0)
Jan 5 15:27:52 server.mydomain.nl postfix/qmgr[4178]: 2E673904CBB: removed
Jan 5 15:27:52 server.mydomain.nl postfix/pipe[4227]: AB6E8904CD0: to=<[email protected]>, orig_to=<[email protected]>, relay=dovecot, delay=0.16, delays=0.04/0.01/0/0.11, dsn=2.0.0, status=sent (delivered via dovecot service)
Also some other people are trying to mail me on test@. But I dont see the any message recieving in the logs, and also no bounce message is there.
Hope somebody can help me with this, since I have lost a lot email from now.

Dear pterobyte,
Thank you very much for you help.
I indeed use a filesending service for testing, and agree that thats not the best way to test, but it was a way.
Since most email are delivered it is hard to test when it is going wrong.
Its a good change that it has to do with the DNS.
Does anybody know how to test if DNS is installed proper? I did install a default MLS installation.
What I see is that there is one issue with my reversed DNS.
When I type in terminal:
Host server.crypton.nl,
I get my IP, but when I type:
Host 83.2.97.95
I don't see my server host but the one from my ISP.
83.2.97.95.in-addr.arpa domain name pointer 095-097-002-083.static.chello.nl.
Not
83.2.97.95.in-addr.arpa domain name pointer 095-097-002-083.server.crypton.nl
Might that be the problem?
Since you mention it can it has to do with the DNS.
Since it is all default, i dont know what is wrong with it.
Kind regards,
Flip

All FRM messages are suppressed after buissness rules validation

hello,
i've just discovered this really odd and annoying problem and I need some help. After validating business rules all forms messages are suppressed. If I re-enter the form, messages appear again, but are "visible" only till next business rules validation.
this is the scenario:
1. When I enter the form, I disable all business rules
2. I insert some data and commit. Message FRM-40400 appears.
3. I validate business rules by pressing button "Validate" (I call procedure which enables all business rules, calls procedure capi.validate_all_static_br, disables business rules and displays errors with Qms$errors.RaiseQMSFailure)
4. if i change some data and commit, message FRM-40400 does not appear.
I've done some debugging and discovered problem in qmslib65.pll package qms$forms_errors procedure push
PROCEDURE Push
( p_msg IN VARCHAR2
, p_error IN VARCHAR2 DEFAULT 'I'
, p_msg_type IN VARCHAR2 DEFAULT ''
, p_msgid IN NUMBER DEFAULT 0
, p_loc IN VARCHAR2 DEFAULT '') IS
-- Purpose Show message to the end-user, standard procedure for the Oracle Forms
-- Generator of Designer/2000 to pass the display and handling of a message
-- to a user created procedure.
-- Usage Called by the Oracle Forms Generator code
-- Parameters : msg Text message
-- error ERRor or WARNing
-- msg_type ORA, API or user TLA
-- msg_id Id of message
-- loc Location where error occured
-- Remarks
v_msg VARCHAR2(2000) := p_msg;
v_error VARCHAR2(2000) := p_error;
v_servermsg VARCHAR2(2000) := DBMS_ERROR_TEXT;
l_empty_errorrec hil_Message.message_rectype;
BEGIN
IF p_msgid != 0
THEN
g_errorrec.severity := p_error;
ELSIF ((SUBSTR (v_msg, 1, 11) = 'API Error: ')) OR
((INSTR (v_servermsg, 'ORA-20999') <> 0) AND (v_msg IS NULL)) OR
(INSTR (v_msg, 'ORA-20999') <> 0)
THEN
-- error returned from the API, just display no further action required ?
HandleServerAPIError (p_msg);
-- M. Kappel
/* 11-apr-2001
- Allow check of v_servermsg even if v_msg contains data.
- With new-style cdm ruleframe, v_msg contains 'ORA-20998'.
We never looked at v_servermsg because v_msg was not null.
- With old-style database trigger business logic, v_msg contains only text.
If we still never look at v_servermsg, we don't identify that the error is
a 20998 and therefore we raise an alert 'Transaction Failed' instead of
showing the 'Errors in this Transaction' window.
-- ELSIF ((INSTR (v_servermsg, 'ORA-20998') <> 0) AND (v_msg IS NULL)) OR
-- (INSTR (v_msg, 'ORA-20998') <> 0)
-- THEN
ELSIF (INSTR (v_servermsg, 'ORA-20998') <> 0) OR
(INSTR (v_msg, 'ORA-20998') <> 0)
THEN
HandleServerApplError (p_msg);
-- error returned from the API, just display no further action required ?
ELSIF ((INSTR (v_servermsg, 'ORA-20000') <> 0) AND (v_msg IS NULL)) OR
(INSTR (v_msg, 'ORA-20000') <> 0)
THEN
-- error was raised by old Headstart code with raise_application_error
-- strip ora-20000 : , check if code (get message) or message
HandleOldHeadstart (v_servermsg);
ELSIF (SUBSTR (v_msg, 1, 3) IN ('FRM', 'MNU', 'PLS', 'SRW', 'ORA', 'REP'))
THEN
HandleOracleError (v_msg, v_error);
ELSE
HandleApplError(v_msg, v_error);
END IF;
Display_Error (g_errorrec);
g_errorrec := l_empty_errorrec;
END Push;
IMO, this part of code
ELSIF (INSTR (v_servermsg, 'ORA-20998') <> 0) OR
(INSTR (v_msg, 'ORA-20998') <> 0)
is either obsolete or incomplete. It should be something like this:
ELSIF (INSTR (v_servermsg, 'ORA-20998') <> 0 AND(v_msg IS NULL)) OR (INSTR (v_msg, 'ORA-20998') <> 0)
i would like to know if anyone have simmilar problem and if there are any other solutions then above mentioned.
Kind regards,
Damjan

I'm having the same problem, i'm using 6.5.22 with the C/S-kit
Is there already a solution for this problem?
Regards,
Richard Teunissen

Help! all outgoing messages are copied to me-very irritating

Help! all outgoing messages are copied to me-very irritating

I've now done Literally every possible thing listed in the help
or that I was told to do in this thread, and nothing has worked.
Not sure what you mean. Have you tried uninstalling all the plug-ins as well? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/InputManagers/
~/Library/Mail/Bundles/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

For all of you who think Encore messages are obscure & that Adobe Support is lousy - Read On

I thought I would share a little story of woe with you all.
Not only will this give you a good laugh, but it will show you that you essentially don't know when you have it as good as you do with Adobe.
I create High Resolution DVD-Audio discs, and for this I have to use Sonic's DVD-Audio Creator system. It is not only the equivalent for Audio of Scenarist for Video, but it is almost as expensive as well. The point will become clear.
So, I am authoring this Widescreen project and the deadline is like tomorrow.
So it's a case of "hurry, hurry, hurry".
Error #1 - "cannot open file xxx_HL_LB.tif" that is it. So I am looking through, and thinking "there isn't one. Must have missed something here".
Yet to no avail. In desperation, I dig out the manual and buried away in an appendix is the information that for a Widescreen disc, the SPHL image is not scaled as this makes text degrade significantly, so a separate SPHL file with the naming convention of (filename)_HL_LB.TIF is required.
This has to be manually placed into the folder created when using the "Import Menu" tool, as it cannot be done automatically".
It then goes on to say that if Pan & Scan is also required, these need yet another file with the naming convention of (filename)_HL_PS.TIF.
Thank for making this obvious guys - you would have thought that the Command Editor tool would point this out to you when you set the Aspect Ratio to 16:9, but no.
So I get this sorted out - only 86 screens, all requiring new Highlight Layers.
It's compile time again.
Error #2 - "Cannot open source file "mainmenu ATS.TIF" - for those of you who know Sonic, you'll no doubt spot the problem immediately. If you do not know this, and try to call support, you will be told that unless you have a maintenance contract, online support is not available. A maintenance contract is several thousand dollars - per year.
(The answer, if you are unaware, is that the compiler cannot handle spaces in the file names, yet the importer has no such problem & again does not tell you you are importing a file that is effectively useless and will crash the compiler with an error message.)
I fix this & move on.
Error #3 - gets right to the end of the process.
All files converted & parsed.
All AOB created
All VOB created.
Starts laying out the UDF/IFO information, gets all the way to the end and errors with a "illegal filename - cannot use ?></\-, only _ 1-9 and A-Z"
Again, the command editor could tell you this, and not allow you to enter in the bloody name, but no - that would be far too easy.
It's the support that annoys me more than anything though.
Sonic still sell this product - it's $13,000 - and yet refuse to provide online support as it is a "dead format" (who told them that? I have done 5 this year already, and have another 23 on the books already) despite the fact that labels are still releasing in DVD-A (albeit few & far between) and that if I want to continue with support I should buy a maintenance contract. They go on to "helpfully" point out that I should get in touch with my supplier, as the new HD formats offer all that is on DVD-A & more besides - yeah, like the $150,000 price tag plus support contract, annual AACS Site license, and per-title AACS fees that are mandatory despite all Blu Ray DRM being broken wide-open.
And you lot moan about Adobe, and Encore's messages?
You do not know when you are well off.

Part 2.
Another thing that all Encore users ought to regularly offer up a daily prayer of thanks for is the PSD support for menus.
Let me tell you a little story, all about how bloody awkward it
i can
be, again using Industry Standard "Flagship" applications.
The little saga above about the additional _HL_LB image completely forgot to mention that there is a very nasty scaling issue awaiting the ignorant (like me).
It doesn't scale the letterbox image automatically.
SO, it's a case of as usual, preparing all Widescreen assets in anamorphic mode (create & design in PS using PAR correction, reshape image to Square Pixels)
Duplicate the _HL for the _HL_LB image.
Now, because of the rescaling issue, take this into PS, and resize the image to 720x360, then resize the
i canvas
to 720x480, making certain your background is white, as failure to do this will mean the Letterboxed SPHL are incorrectly scaled, although the button hotspots are in the right place.
Aargh - if it was not for the "Phone A Friend" option, I would still be stuck on this.

Bounced messages are returned to all people in an email list

Similar Messages

Maybe you are looking for