BOXIR2 SP4 Error - Specified directory does not contain an installation

Upgrading from BOXIR2 SP3 to SP4. Cannot get past the 4th screen (where it asks for installation directory). I do have an existing installation but the install does not see it.
Please advise.

Hello Manny,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Similar Messages

Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

Migration from 2003 - 2010, OAB errors on client, and OAB virtual directory does not contain any files.

Hi,
Please re-create the Outlook profile to have a try. If the issue persists, we can do the further checks in Exchange server.
Please make sure you have changed the OAB generation server to Exchange 2010 and enable Web distribution on the Exchange 2010 Client Access server:
Move-OfflineAddressBook "Default Offline Address List" -Server <MBX2010>
If all configurations are correct, please check whether there is any folder in the following path in Exchange sever 2010:
a. OAB generation in Mailbox:
\\Program Files\Microsoft\Exchange Server\V14\ExchangeOAB
b. OAB distribution in Client Access:
\\Program Files\Microsoft\Exchange Server\V14\ClientAccess\OAB
Thanks,
Winnie Liang
TechNet Community Support

SCCM 2012 - Adding Operating System Installer (The specified path does not contain a valid operating system ..)

I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
have fixed the problem (of I don't understand the fix)
Configuration
SCCM 2012 SP1 5.0.7804.1000
WADK 8.100.26629.0 < Suggested Fix
Server 2008 R2
SCCM Administrator with UserID = SCCMAdmin
Steps / Fixes I have followed
I have configured a administrative share
\\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
SYSTEM has Full Control
<Suggested Fix
SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
Local Administrators (the local machine administrator) has Full Control
<Suggested Fix
<o:p></o:p>
Another Fix is to explicitly grant all permissions to the SCCM Administrator
<Suggested Fix
>Administrative Users ...
Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
Another suggestion I was able to glean was to Specify the Network Access Account
so I configured SCCMAdmin as the Network Access Account.
Another potential fix is that the image ISO file that has been downloaded is corrupt.   So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
To double check,
I computed the Hash on the Install.WIM located in the Sources directory and compared with
the computed Has Tag for the Install.WIM on the ISO Image ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
I tried to load the images into SCCM 2012 using the "Operating System Installers" option
UNC to installer
\\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
Then I receive the lovely message <o:p></o:p>
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path"<o:p></o:p>
<o:p> </o:p>
From
C:\Program Files (x86)\Microsoft Configuration
Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
<o:p> </o:p>
\r\nSystem.Management.ManagementException\r\nGeneric failure \r\n
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
errorCode)
   at System.Management.ManagementObject.InvokeMethod(String
methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
   at
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
methodClass, String methodName, Dictionary`2 methodParameters, Boolean
traceParameters)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM
file due to error 80070002";
ErrorCode = 2147942402;
File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
Line = 586;
Operation = "ExecMethod";
ParameterInfo = "SMS_OperatingSystemInstallPackage";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
\r\n<o:p></o:p>
What am I missing ???? I assume something simple but, darn I'm stumped!!!

Hi,
Configuration Manager version
Windows AIK or Windows ADK Version
Windows PE versions for boot images customizable from the Configuration Manager console
Supported Windows PE versions for boot images not customizable from the Configuration Manager console
System Center 2012 Configuration Manager with no service pack
Windows AIK for Windows 7
Windows PE 3
None
System Center 2012 Configuration Manager with SP1
Windows ADK for Windows 8
Windows PE 4
None
System Center 2012 Configuration Manager with SP1 and cumulative update 2
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11
System Center 2012 Configuration Manager with SP1 and cumulative update 3
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11 and Windows PE 5
System Center 2012 R2 Configuration Manager
Windows ADK for Windows 8.1
Windows PE 5
Windows PE 3.11
Please try to install the Windows ADK for Windows 8.
http://www.microsoft.com/en-us/download/details.aspx?id=30652
For more information, please review the link below:
http://technet.microsoft.com/en-us/library/gg682187.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Specified directory does not exist

Hi there,
I'm having a wierd problem, and can't seem to find a way around it.
I'm logging into my clients' version 5 SP10 application, and the "Finance" app works fine: all dimensions downloaded, all folders created locally, etc (today is the first day I've used my PC with this appset so I didn't have these locally previously).
However, when I switch to my "interco" app, or any other, I get this error (NOTE: my user profile folder is on D not C):
"The Specified directory does not exists: D:\Jason\Documents\Outlooksoft\<Server Name>\<User>\App Info\<Appset>\<Application>\eExcel"
Sorry, not very easy to read!
It doesn't seem to create these folders. But if I do it manually (through My Computer), the next time I log in I don't get the error - presumably because the folder has been created.
My colleague has the exact same problem from the exact same application set, and we are using different Windows OSs (he is on XP and I'm on Vista) so it can't be that.
Any ideas? I have worked at this client many times, but not since SP10 was applied - could that be the cause of the problem?
Thanks as always!
Jason

Jason,
I had the same issue with a few applications. SAP tech advised me to copy an application and it should re-create folder structure. Another approach is to process application without selecting any options - should also re-create folder structure, but I can't confirm this one.
And 3rd way is to copy folder structure from a good (working) version of the same application into the "broken" one.
Hope that helps,
Akim

Flash Builder 4.7 - AIR SDK 3.1: Directory does not contain a AIR SDK

Im still having issues with using AIR 3.1 with flash builder 4.7 (see my previous posts) and would appreciate any help/ advice.
Ive uninstalled FB 4.7, reinstalled and followed the procedure to overlay AIR 3.1. Im now getting the following error -
AIR SDK 3.1: Directory does not contain a AIR SDK
Reason for using AIR 3.1 is that all of my projects are built with AIR 3.1 and no longer work with FB 4.7.

Can anyone from adobe help with this please?

Mysite Error - The site does not contain a default keywords termstore

I know this error has to do with the Managed Metadata Service. I recently had to delete my User Profile Service and Search Service, and then recreate new ones. Do I need to connect them to the existing Managed Metadata Service somehow?
I get this error when trying to change certain user profile columns in Mysites.

Go to the list of shared services in Central admin, highlight the Managed Metadata Service Proxy and select the properties button from the Ribbon. You'll see four checkboxes. Make sure the one labeled 'This service application is the default
storage location for Keywords' is checked. Depending on the order of installation of services or if the Managed Metadata service is deleted and recreated this sometimes doesn't happen.
http://social.technet.microsoft.com/Forums/en-US/3cba2f1a-c1c7-4aed-b46e-6247f6a14e88/after-setting-everything-up-successfully-error-the-site-does-not-contain-a-default-keywords?forum=sharepointadminlegacy
http://technet.microsoft.com/en-us/library/gg750250%28v=office.14%29.aspx
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://www.deliveron.com/blog/post/Define-the-default-Term-store-for-New-keywords-in-SharePoint-2010.aspx

Uploading AIR for IOS thru Application Loader I get the following error - The package does not contain an Info.plist.

I'm publishing an .fla in AIR for IOS.
I'm in CC 2014 so first I need to know which AIR should I publish in?
newest is AIR 14.0.0.178 for IOS
IOS deployment type is App Store
publishes with no error.
I see the following files included .swf and app.xml
I convert the .ipa to a zip file
Upload that thru the Application Loader I get the following error
The package does not contain an Info.plist.
Where is the infoplist for this and do I convert the .ipa and the info to a zip file?
I converted the .ipa to a .zip and the intoplist file is NOT THERE how do I generate this?
Any help here?

Ok this is becoming very very frustrating as I have been at this for hours now. So the only way to explain this is to write what I did step by step as I have to be doing something wrong, just to recap:
I was publishing from Flash CC 2014 using AIR 14.0 and getting Digital Certificate is not valid message.
Was instructed to download new AIR 17 , I did this installed into Flash and used to publish.
I used my previous p12, app ID and distribution certificates all generated properly.
The file worked ONCE but I got an app ID error ( I understood I used the wrong app ID)
I changed it to the right app ID and the very next time and after 10 attempts I got the same error Digital Certificate is not valid
SO I then downloaded AIR 16.0
RE DID ALL MY CERTIFICATES AND P12'S
went to publish and I STILL GET THE SAME MESSAGE Digital Certificate is not valid

The Specified Directory Does not Exist

Hi expert
could you help me with my problem , this word " The Specified Directory Does Not Exist" its some stupid question , isn't it ?
this is my sitiuation :
1. BPC version is SAP BPC 5.0.512
2. we are using MS Excel 2003
our user do some modification from BPC WEB (the BPC open excel file with many macro and add-in etc ... ), then user save using Save Dynamic Template sub menu from eTools menu , and raise message "The Specified Directory Does not Exist < directory path>/eEXCEL. "
the questions Are .
1. Could anyone explain why BPC try to save in Client Local Direcory not is BPC Server
2. Could anyone help me how to resolve the problem ?
(i am appolagize with my bad english )
thanks.

HI nvsleman ,
I had the same problem and I manually copied the eExcel folder (on my local harddrive) from a working application to the application in question.
Hope this helps
Sabine

MDT 2013 The source directory does not contain an identifiable operating system

Hi,
I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS?
Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it.
Chaitanya.
Chaitanya.

Hi,
I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS?
Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it.
Chaitanya.
Chaitanya.
This is expected behavior because Server 2008 is unsupported in MDT 2013:
http://deploymentresearch.com/Research/Post/330/What-if-I-told-you-The-OSD-Support-Matrix-for-MDT-and-ConfigMgr-is-here
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Import Error:Root Directory Does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

C# compiling error: 'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found (are you missing a using directive or an assembly reference?)

Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;

Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code

Error:The node does not contain any elements

Hi Experts,
I am getting this error.
The following error text was processed in the system SR6 : The node does not contain any elements. COMPONENTCONTROLLER.1.ROADMAP
The error occurred on the application server server6_SR6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
      Method: IF_WD_CONTEXT_NODE~SET_STATIC_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_VAL=======CP
      Method: WDDOINIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
      Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
      Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
      Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
      Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
      Method: INIT of program CL_WDR_CONTROLLER=============CP
      Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
      Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
What is the problem here?
Thank you.
Lalitha.

(Assuming you have created elements for node...)
Definitely it is cardinality problem, please check that... Try to understand below points to avoid such error.
When a node is created in the context of a Web Dynpro component, the cardinality of the node is specified. The cardinality defines how often a node is to be instantiated at runtime u2013 that is, how many elements of this node are available at runtime.
u2022        1u20261          Only one element is instantiated.
u2022        0u20261          At runtime, no more than one element is instantiated, but it is also possible that no element is instantiated.
u2022        1u2026n          n elements can be instantiated, but at least one element must be instantiated.
u2022        0u2026n          The number of instantiated elements of the context node can vary.
The cardinalities 0..n and 1..n correspond to the declaration of an internal table. The cardinality 1..1 corresponds to the declaration of a structure.
Thanks,
Swanand.

Error remote table does not contain a primary key

I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
information :
ASD.SUBHI.COM is database link from oracle to microsoft sql
"DBO"."REGIONS" name of the table
CREATE TABLE regions (a INTEGER primary key) command to create table
error
ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
Note: I go to sql server and verify that primary key is creates
is this the best place to like this question ?
if you need more details please tell me I need the answer

I make replication between oracle and Microsoft sql using getway for sql but when I insert to table in oracle I get this error in apply process
information :
ASD.SUBHI.COM is database link from oracle to microsoft sql
"DBO"."REGIONS" name of the table
CREATE TABLE regions (a INTEGER primary key) command to create table
error
ORA-26711: remote table does not contain a primary key constraint ORA-26712: remote object is "DBO"."REGIONS"@"ASD.SUBHI.COM"
Note: I go to sql server and verify that primary key is creates
is this the best place to like this question ?
if you need more details please tell me I need the answer

Error: The folder does not contain a valid Flex Builder Project.

HI All,
My first Post here. I am new to Flex Hardly 10 days old. I
want to open the flexstore project in flex builder 3 and could not
able to do so.
What I did: file->import->.... got the error msg as
"The folder does not contain a valid Flex Builder Project".
also tried file->import->general->..... same error
msg.
I need your Help guys
I downloaded the sample project from
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Thanks in Advance
SAS
Text

"shakeb66" <[email protected]> wrote in
message
news:gknbn8$av9$[email protected]..
> HI All,
> My first Post here. I am new to Flex Hardly 10 days old.
I want to open
> the
> flexstore project in flex builder 3 and could not able
to do so.
> What I did: file->import->.... got the error msg
as "The folder does not
> contain a valid Flex Builder Project".
> also tried file->import->general->..... same
error msg.
> I need your Help guys
> I downloaded the sample project from
>
>
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Try creating a new Flex project and dragging the files from
the zip into the
src folder. You may find that you need to rearrange things a
bit, depending
on how they set up the project, but this should get you
started.
HTH;
Amy

Error - The site does not contain a default keywords termstore

Getting the "The site does not contain a default keywords termstore" error in mysites (SharePoint 2010). The "This service application is
the default storage location for Keywords." box is already checked. Which from my Googling, is normally the fix.
Any ideas on what else i can try?

Hi,
According to your post, my understanding is that you get an error in SharePoint 2010 My site.
Do you have more than one managed metadata service applications set as the default for the same web application?
If you have more than one managed metadata service applications, you can try to uncheck the “This service application is the default storage location for keywords” option for other managed metadata service applications.
If you have only one managed metadata service applications, you can try to delete this managed metadata service application and create a new one to test if it works.
For more information, you can refer to:
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://technet.microsoft.com/en-us/library/gg750250(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ee530391(v=office.14).aspx
Best Regards,
Yumi Fu

BOXIR2 SP4 Error - Specified directory does not contain an installation

Similar Messages

Maybe you are looking for