BP_HEAD_SEARCH/MainSearchShuffler Defaulting category does not work

Hello,
at the moment I implement the search for accounts.
A requirement is, that only corporate accounts can be searched.
So I enhanced the view BP_HEAD_SEARCH/MainSearchShuffler and the context node search.
There I redefined the method get_v_category. All entries (private accounts, all accounts...) are deleted in the ddlb,
only the category 'corporate account' is in the ddlb now.
But I have the problem that is described in note 1308330: If you go to account search and search the first time, the results are not shown in the result list. But above this list there is a message: "x Accounts found". The entry in the search field is also deleted when you click on search.
If you search again, than the results are shown and everything is ok.
How can I solve this problem?
Can somebody help me, please?
Kind regards
Semra

Hi Semra,
I had the same task, but I solved it differently.
First I added the following code:
Component: <BP_HEAD_SEARCH>
View          : <MainSearchShuffler>
Class         : <ZL_BP_HEAD__MAINSEARCHSHU_IMPL> (because the component and the view are enhanced)
Methode     : Overwrite <DO_INIT_CONTEXT>
Code          :
method DO_INIT_CONTEXT.
CALL METHOD SUPER->DO_INIT_CONTEXT.
Default the Account type for the search to <Corporate Account>
typed_context->search->set_category( ATTRIBUTE_PATH = ''
                                       value          = '2' ).
endmethod.
Now you have only to take out the account type out of the shuffler view configuration.
Best Regards
Patrik

Similar Messages

My Time Capsule has stopped working. Restoring default settings does not work.

I have a 2TB Time Capsule (Model No. A1409). I think that it is approximately 20 months old. It has been working very well until around two months ago, when it began to display the flashing amber light. At that time I performed a hard reset, restoring the default settings. This worked and the capsule continued backing up perfectly for a further three weeks. However, about three weeks back the flashing amber light returned. As I have been busy elsewhere I was not able to attend to this untl recently. It does not seem to matter how many times I reset the device, I cannot return it to a working state.
The capsule has previously been set up to connect to the internet through my existing broadband service. As such, it was initially set up and subsequently restored wirelessly. I no longer seem to be able to achieve this. Has anybody else experienced similar difficulties and if so, were you able to remedy it.
Grateful for any advice. I feel another trip to the Genius Bar coming on.

Yeah absolutely - no problem.
I had the same thing happen where I did a restore on my personal TimeCapsule (TC),
and when I updated the device after installing it, it for some reason set the TC into bridged mode shutting off DHCP/NAT service.
Which means, that it doesn't reserve an IP for any client trying to attach. This is what it sounds like yours is doing.
So if you see that it says bridged, and that box with dhcp reservation is greyed out, change it from bridged to DHCP/NAT.
This will allow any client (computer/device) to attach and reserve an IP address for access to the internet.
Once that is set, and you update, hopefully the light should go green.
I would also recommend checking the "internet" tab, and making sure that your IP address is assigned using DHCP. (It probably is - but that part is essential for communication with your Internet Service Provider (ISP)...
SO - if the device goes green after the update:
If it does, then go back into the router and click on the wireless tab and confirm your wireless settings are correct, if any changes are made, update.
At that point, you should be able unplug your laptop to wirelessly connect to the router.

Bug: "default applications" does not work

I set my internet browser to "opera mobile". nonetheless, everything gets opened in the nokia browser.
What exactly is the benefit of changing the "default applications" then?

@BassemN8
Presumably you are referring to feature that performed correctly under Anna no longer being operative under Belle?
Happy to have helped forum with a Support Ratio = 42.5

The troubleshooting options for setting firefox as default does not work

When I go to my Home-Welsome to Century Link-Mozilla Firefox; a tab comes up saying "setting firefox as the default browser does not work". I tried all the various troubleshooting options. They did not work.

Hello,
Did you pass the parameters: IS_LAYOUT & I_SAVE to the ALV function module?
FP_ST_LAYOUT-ZEBRA = C_X.
FP_ST_LAYOUT-COLWIDTH_OPTIMIZE = C_X.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM       = SY-REPID
      IS_LAYOUT                = FP_ST_LAYOUT
      IT_FIELDCAT              = FP_IT_FIELDCAT
      I_SAVE                   = 'A'
    TABLES
      T_OUTTAB                 = FP_IT_OUTPUT
    EXCEPTIONS
      PROGRAM_ERROR            = 1
      OTHERS                   = 2.
IF SY-SUBRC <> 0.
*   Error in calling Standard ALV Functional Module
    MESSAGE I019. "Error Occured in ALV Function Module
    LEAVE LIST-PROCESSING.
ENDIF.
Hope this helps.
BR,
Suhas

"Add to Shooping cart" button does not work when changing Product Category

Dear all, we are running SRM 4.0 Classic scenario and we have a strange problem with Product Category field. When click on the "Describe Requirement", it opens the shopping cart page with the Product Category field and the default value is coming from favorites. As long as you dont change this value , enter the other fields and click on the "Add to shopping cart" button, then it works. If the users try to change this value on this page to select a different value from the drop down, then the "Add to Shopping Cart" button does not work. Has anyone encountered this problem before. Users are getting frustrated with this behaviour. Any help to fix this issue is appreciated. Thanks in advance.
Regards
Gabriel Bertrand

Dear Disha, this is what is the behaviour.
Suppose, if for a particular user, there are 4 items listed as favorites in the Product category and one of them is a default value. If you don't make any changes to this value and then click on Add to Shopping Cart, it works. If you try to select a different value other than the default from the favorites, then the Button does not do anything.You click on it nothing happens and cannot go to the next page. Also all the links are disabled (ie Describe Requirement / Old Purchase Order and Template)
If we dont change the value for Product category and go to the next page (with default value) and then change the Product category here, it works (Continue button works and were able to Order or Hold).
Thanks
Regards
Gabriel

Most of the default Mac Apps does not work after Mavericks Upgrade

Hi, I did everything, but nothing has brought me out of this misery .
I Updated Maverick just 2 days after its release. Had no problems, other then slow Finder. I restarted my iMac last week, and got caught with these issues, known to me, not sure what all bugs are there.
All these apps does not work: App Store, TextEdit, Preview, Terminal, iBooks, Maps, Calendar, Contacts, Mail, etc
I do not know how to do a clean install, as I had upgraded from Snow Leopord to Mountain Lion and to Maverick using App Store, which does not open at all.
Hoping to get some response soon from Apple support team to help me.

Hi Arthur,
Thanks for the headsup about Apple Support thing... My iMac is not under warranty.
And below is the report generated from EtreCheck. Hope it can help me find the solution.
Hardware Information:
          iMac (20-inch, Early 2008)
          iMac - model: iMac8,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          ATI Radeon HD 2400 - VRAM: 128 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
Startup Items:
          FanControlDaemon - Path: /Library/StartupItems/FanControlDaemon
          HDDFanControlDaemon - Path: /Library/StartupItems/HDDFanControlDaemon
          HP IO - Path: /Library/StartupItems/HP IO
          HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
          MissingSyncListener - Path: /Library/StartupItems/MissingSyncListener
          MySQLCOM - Path: /Library/StartupItems/MySQLCOM
          ParallelsDesktopTransporter - Path: /Library/StartupItems/ParallelsDesktopTransporter
          VirtualBox - Path: /Library/StartupItems/VirtualBox
System Software:
          OS X 10.9 (13A603) - Uptime: 2 days 2:6:45
Disk Information:
          WDC WD2500AAJS-40VWA1 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    My iMac (disk0s2) /: 249.2 GB (22.18 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          Western Digital My Book 1110 999.5 GB
                    WORK (disk1s1) /Volumes/WORK: 375.81 GB (95.66 GB free)
                    PLEASURE (disk1s2) /Volumes/PLEASURE: 623.69 GB (35.57 GB free)
          Apple Inc. Built-in iSight
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.logmein.driver.LogMeInSoundDriver          (1.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
          [failed] com.google.GoogleML.plist
          [loaded] com.google.keystone.daemon.plist
          [not loaded] com.logmein.logmeinserver.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [loaded] com.wdc.WDDMservice.plist
          [loaded] com.wdc.WDSmartWareServer.plist
          [loaded] rapiback.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.logmein.logmeingui.plist
          [not loaded] com.logmein.logmeinguiagent.plist
          [not loaded] com.logmein.logmeinguiagentatlogin.plist
          [loaded] syncmateStarter.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.ARM.[...].plist
          [loaded] com.facebook.videochat.[redacted].plist
          [loaded] com.macpaw.CleanMyMac.helperTool.plist
          [not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
          [loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
          AirPort Base Station Agent
          EarthDesk Engine
          LMILaunchAgentFixer
          AdobeResourceSynchronizer
          RealPlayer Downloader Agent
          Windows Phone 7 Connector Agent
          iAntiVirus
          TextEdit
          StatusMenu
          HP Scheduler
          WDQuickView
3rd Party Preference Panes:
          Application Enhancer
          DivX
          EarthDesk
          Fan Control
          Flash Player
          Flip4Mac WMV
          Growl
          MacFUSE
          WDQuickView
Internet Plug-ins:
          AdobeExManDetect.plugin
          AdobePDFViewer.plugin
          AdobePDFViewerNPAPI.plugin
          Default Browser.plugin
          DirectorShockwave.plugin
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          RealPlayer Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
          Picasa.plugin
          Unity Web Player.plugin
          WebEx.plugin
          WebEx64.plugin
Bad Fonts:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              29%          mds
               2%          WindowServer
               1%          mds_stores
               1%          LogMeInGUI
               1%          RealPlayer Downloader Agent
               1%          EtreCheck
               1%          FanControlDaemon
               0%          uTorrent
               0%          notifyd
               0%          networkd
Top Processes by Memory:
          1.00 GB            mds
          106 MB             mds_stores
          78 MB              Google Chrome
          49 MB              Finder
          45 MB              WindowServer
          40 MB              Google Chrome Helper
          37 MB              VLC
          29 MB              uTorrent
          20 MB              EtreCheck
          16 MB              DashboardClient
Virtual Memory Statistics:
          43 MB              Free RAM
          989 MB             Active RAM
          934 MB             Inactive RAM
          447 MB             Wired RAM
          4.25 GB            Page-ins
          454 MB             Page-outs

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

I found this plugin which solved pretty much all of my mail font rendering problems. It is designed for Lion, so don't know whether it will work but thought I would offer it up.
http://noware-it.zxq.net/

Command to set firefox as default does not work

After setting chrome as my default browser, I want to set Firefox as my default browser from the command line on windows.
According to http://kb.mozillazine.org/Default_browser I ran
firefox.exe -silent -setDefaultBrowser
But that does not work. Chrome stays as the default browser. Setting FF as the default from the FF dialog (asking to set as default) works but I want to do it from the commandline.

We have a support article on that: [[Make Firefox the default browser on Android]]. When trying to determine the current default browser app, I think Samsung's is called "Internet".

Save as default does not work

Pages 09 constantly defaults to US Letter. I've tried to change to US Letter Borderless but the 'Save as Default' on Page Setup does not work. I've reloaded Pages to no avail.
Any tips, tricks or suggestions?

Is it an already saved document you are having problem with or one of the templates? How do you know that it doesn't default to Borderless? But when I try on Snow Leopard it doesn't remember borderless either.

How do I set Firefox 10.0.2 to be default browser in Windows 7, using a script or setup switch. "Firefox.exe -setDefaultBrowser" does NOT work.

I want to set Firefox as default browser for all my users.
I can do this by opening Firefox and go to Tools --> Options --> Advanced and hit the "Check now" button. That works fine, but I need to accomplish this automatically.
Running setup with the -setDefaultBrowser switch does NOT work. Running "firefox.exe -silent -SetDefaultBrowser" after setup does NOT work.
Is this even possible? Or are we stuck with IE?

Thank you for your reply, however it really does not work for me.
I have Firefox installed, as well as Internet Explorer 9. If I check "Default Programs --> Set Default Programs" in Windows 7 it states that Internet Explorer is default.
If I create a shortcut on my desktop that points to "www.mozilla.org" for example, and double-click that shortcut, it will open in Internet Explorer.
I now run "%ProgramFiles%\Mozilla Firefox\Firefox.exe -silent -setDefaultBrowser" with administrative privileges.
I look again in "Default programs" and i still says IE is default browser. If I click on my shortcut it still opens in IE.
If I change the setting manually from within Firefox it works fine.
Please help, I really can't make this work.

Expert Mode ViewObject: default 'query by example' mechanism does not work

In JDeveloper 11G 1.1.1
I have created an Expert Mode view object(VO) which I'm trying to filter in an ADF Swing Panel
The Panel contains a Swing Table created by dropping a VO data control on the panel as an ADF bound Swing Table.
TEST
Run the panel.
Set the Query Mode on (from the Database menu)
Enter a relevant view criterion
Execute the Query
TEST FAILS
Table is refreshed but it still displays the entire VO collection (non-filtered).
Repeating the same experiment with a default, entity object generated VO works as expected.
Question
Can the default 'query-by-example' mechanism as provided by the JUTestFrame and the JUNavigationBar be used with Expert Mode view Objects?
If yes are there any tricks to making this work?

Hello Frank;
Additional TEST RESULTS
In JDev11G
The default 'query by example mechanism' does not work if you create a new View Object using the <Select data source...> option <Read-only access through SQL query>.
However, IT DOES WORK if you create a new ViewObject selecting <Updatable access through entity objects> and in the Query step you select <Expert Mode>
Could you please check and confirm.
Thanks!
Ioannis
Edited by: imouts on Dec 5, 2008 1:38 PM

Configuration Template Builder WL8.1 does not work

Hello,
     After spending nearly 2 days now trying to get a Configuration Template
built, I've concluded this simply does not work. Has anyone used the
Config Template builder to package a semi-complex application on top of WLI?
     I'm trying to have 2 of my applications, the JMS and JDBC resources,
and a WLI event generator packaged up for easy deployment to someone
else's server configuration. The problem with this is that there are
required resources for WLI, namely a database. The Pointbase database
included for WLI does not get included in the template automatically.
There are also some flat-out bugs:
If you choose to include a resource adapter "application", such as
jms-xa-adp.rar, the template builder does not bundle this in the
template and deploy it correctly. The template builder restricts you to
putting applications in the relative path starting at ./
For jms-xa-adp.rar, its original location is in $WL_HOME/server/lib, and
the template builder defaults to put it in ./lib of your template.
However, when you create a domain with the template, jms-xa-adp.rar does
not get placed in your ./lib directory. This causes you to then go and
manually edit your config.xml to point back at $WL_HOME/server/lib or to
manually copy jms-xa-adp.rar into your ./lib directory (which the
template mechanism should do for you).
Relative paths in the config.xml file require you to execute the config
builder from the directory of the domain you are making a template for.
The template builder should instead be smart enough to realize that
relative paths in the config.xml file are relative to the directory that
the config.xml is in, not the one you are running the template builder
from. You'll get an error when trying to create the template cause it
won't find the resources if you're not in that directory.
If anyone has successfully used this to package a WLI application in a
template, please share your experiences and how to do so. In the
meantime, I'm claiming there is no way to nicely package up a server
configuration for a WLI app in Weblogic, and this is a big shortcoming.
Weblogic needs a simple transferrable way of creating server
configurations (it tries to do this with the template, but that is
failing). With JBoss, for example, you simply copy your server directory
into another installation. This doesn't work with Weblogic unfortunately
because it puts hard-coded paths in the config.xml file.
Thanks

Russ,
     Thank you for the detailed responses. The only one I'm currently
struggling with still is the #5, with the scripts between the two. One
of the major benefits of using a J2EE App Server is supposed to be the
portability between servers. I find it disconcerting that BEA Weblogic
restricts me to the platform I created the domain on by creating
platform-specific startup/shutdown scripts for only the platform created
on. It's understandable that a script converter would be difficult, but
at least both the .sh/.cmd files should be created from the first time
you make a domain. If the user only wants one or the other, they can
delete the appropriate one. It's also understandable that the
users/deployers shouldn't have to manually convert a startup/shutdown
script to take the domain to a different box.
     JBoss clearly has BEA beat on ease of deployment here. Their model is
the concept I'm thinking of: you have some generic startup/shutdown
scripts that can load a platform-independent server configuration. You
truly can copy directories as-is between JBoss installations.
     I was hoping to package up a server domain for use on any of the
supported platforms, but since I don't have the time to manually convert
the startup/shutdown scripts, I'm going to have to tell people it's only
for Solaris now.
     Hopefully BEA can fix this in a future SP. There's no need for this
platform-dependency. Also, if the Windows version can generate both
scripts at creation time, then the Solaris should be able to do this as
well (or at least give you the option).
Thanks again for the replies
russ wrote:
Hi Steven,
I have several comments and questions about your last two posts. I will try to
address them in order.
1) "The Pointbase database included for WLI does not get included in the template
automatically."
     By default the template builder only includes the *.cmd and *.sh files in the
template from your domain directory. If you begin building with an existing
domain template all files that were in the template will get included. This was
done because there is no way for the builder to automatically determine all the
files that are required by your template/domain and we steered away from recursively
including all files from the directory so that unused files were not needlessly
included. We can extrapolate some files based on the application paths in the
config.xml, but the rest is left up to the template builder to be aware of what
is needed for their domain to run. So, if you need the Pointbase *.dbn and *.wal
files included in your template just select these files on the ?Add Files? panel
of the template builder and add them to the ?Domain Directory?.
2) ?If you choose to include a resource adapter "application", such as jms-xa-adp.rar,
the template builder does not bundle this in the template and deploy it correctly.?
     The template builder considers application files to be in two categories: Imported
or Internal. When you are at the ?Add Applications? panel of the builder you
will see a checklist of all the applications that are in the domain you selected.
On the right hand side there are two text fields. The top one displays the application
path as it is currently set in the config.xml of that domain. The bottom field
will be different depending on what category the application falls into. As you
click on each application in the list, you may notice that the bottom field may
change from an editable field titled ?Imported Application Path? to a non-editable
field titled ?Internal Application Path?. The difference between the two categories
is that an ?Imported? application?s files will be included in the template jar.
An ?Internal? application?s files will not be included in the template jar because
they are considered internal to the weblogic installation. The jms-xa-adp.rar
should fall into the internal category and should not get included in your template.
     From what you are describing it sounds like the builder attempted to import that
application when it should not have. In an attempt to recreate the problem you
are seeing I deployed that Connector Module through the WLS console and ended
up with an application path of ?C:\bea\weblogic81\server\lib? where ?C:\bea\weblogic81?
is my WL_HOME (a.k.a. USER_INSTALL_DIR). If I then attempt to build a template
from this domain, the builder recognizes this as an internal path and does not
include it inside my template. If the current application path you had looks
different from the one above, that may explain why the builder was attempting
to import it. What was the value of the ?Current Application Path? for that application
deployment?
3) ?Relative paths in the config.xml file require you to execute the config builder
from the directory of the domain you are making a template for.?
     The builder is ?smart? enough to determine relative paths. You should not have
to invoke it from the domain directory you are working with. There is a known
bug in the WebLogic Platform 8.1.1.0 release of the template builder that will
cause it to not find files with relative paths in your domain directory if the
application path in the config.xml is just a ?.?. If this is the case, you should
see a FileNotFoundException when you attempt to create the template. This will
be fixed in SP2 and you can work around this problem by changing those paths to
?./? instead. If this was not the case, what was the path the wizard choked
on?
4) ?Looking through the config file, it seems that it's all of the WLI components
that have absolute paths in the config file. In addition, BEA_WLS_DBMS_ADK has
an absolute path, not sure if that is WLI or WLS. ?
     BEA_WLS_DBMS_ADK is an integration application. If you created the original
domain using the configuration wizard most of the applications in an integration
enabled domain will reference paths inside of you installation directory or ?internal?
paths. For instance, I used the wizard to create a ?Basic WebLogic Integration
Domain?. The path for that application in this domain is: ?C:\bea\weblogic81/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear?
where ?C:\bea\weblogic81? is my WL_HOME or USER_INSTALL_DIR. When I load this
domain into the builder it shows this application as ?internal? and the ?Internal
Application Path? is "$USER_INSTALL_DIR$/integration/adapters/dbms/lib/BEA_WLS_DBMS_ADK.ear".
This will be set as the path value of this application in the config.xml that
will be included in the template you build. When you later use the Configuration
Wizard on this template it will substitute the $USER_INSTALL_DIR$ to the value
of the installation directory of the machine you are creating it on.
     If you were to Change these to relative paths, as Mark previously suggested,
it will only work if you copy the domain directory to the same location relative
to your installation directory on the target machine. Also, if you copy the domain
in this manner you will more than likely run into problems with your start/stop
scripts and be forced to hand modify all the paths contained within. The configuration
wizard tries to alleviate these problems and make the configuration entirely portable.
This gives the user who creates the domain from your template the ability to
put it anywhere they want regardless of the paths in the config.xml.
5) ?However, there is another major problem with the Template Builder: it only
includes the startup/shutdown script for the platform you create the template
on. ???I built the template on Solaris with the UNIX scripts. However, I tried
to create a new config on Windows with this template, and the scripts were not
converted to .bat files!?
     As I stated previously, the builder will only include *.cmd and *.sh scripts
into your template by default. If you created the domain on a unix platform using
the configuration wizard it will not extract the *.cmd files since these aren?t
considered to be useful on unix. If you were then to attempt building a template
from this domain and take it onto a windows platform, it will obviously be missing
any windows scripts. Conversely, the wizard will extract *.sh scripts on windows
because they can still be useful if a user has an MKS or Cygwin type environment
installed. The config wizard and template builder do not have the ability to convert
scripts. The builder will only include existing scripts that are in your domain
directory and automatically determine any necessary string substitutions that
will be needed. Please note that since WebLogic is only supported on the NT/2K/XP
versions of windows you will find that the wizards use ?.cmd? files and not ?.bat?
files since these are more commonly associated with Win 95/98/ME.
     I will be happy to answer any more questions you may have and would also like
to take a look at your domain configuration to try and get a better understanding
of the problems you are encountering.
thanx,
russ

BugsEye iView does not work in EP6.0 sp10

Hello,
We are using SRM and we also want to use BugsEey but the iView does not work. When i ask a preview i get the following error message.
<i>Could not find portal application PDKSystem</i>
Is there anybody who can help me to solve this
Thanks
Kurt

Hi Kurt,
did you change the URL in the BugsEye iView?
To do that, open the mySAP SRM: Content Management folder, right click the BugsEye ECM iView and choose Edit -> Object. In the Property Category drop down menue select Show all. Search for the Content Link property.
The default is something like http://<server>:<port>/DemoCat/servlet/BugsEyeSAP?cmd=login&...
Change this link to your URL (in my case it was something like http://reg/servlet/BugsExeSAP?cmd=login&...) If you don't know which link to use, call your SRM admin to give you the exact URL; after that you should control your link by calling it directly in the browser. If it works, change the URL in your iView.
Hope that helps,
Frank

Firefox does not work after update to 3.6.6 (and all later revisions)

(EDIT: I found the exact revision from which the Firefox is not starting, it is 3.6.6 so I changed them throughout this post, previous revision value was 3.6.8)
I am using Windows 7 x64
After Firefox recently updated to 3.6.6 it does not work any more. The application is listed in task manager but it does not do anything. There is no user interface or anything. Only way to interact with it is "End process". Starting in safe mode or starting Profile manager is not possible.
I tried all possible and suggested solutions in mozilla KB, this and other forums but without success (windows safe mode, firefox safe mode, renaming firefox, waiting, checking for firewall or malware/virus issues, deleting profile, uninstall, clean reinstall and every possible combination of those that I could think of). Always the same result, no error message, firefox shown in task manager and that's it.
When I do clean install of all later firefox revisions starting from 3.6.6 the problem remains, including latest Firefox 4 beta6.
I have no issues with any firefox versions on my Vista laptop, so I would guess that something in my windows environment is not suitable for newer versions of firefox.
As I cannot find official older 3.6.x revision of Firefox, I am currently using 3.5.13 and it works flawlessly.
Any help is appreciated, I ran out of ideas.

You can try a direct connection and select No Proxy in the connection settings.
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"
Also do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

"Always ask me where to save files" does not work.

Summary: The "Always ask me where to save files" feature does not work. No dialog box comes up, apparently because the browser is stuck on a bad old read-only lastDir location, in a prefs.js file that I can't edit.
Details:
I am using Firefox 30.0 on Mac OS 10.6.8. My Mac has a both a read/write Mac partition that I use most of the time, and a bootcamp Windows partition drive ("C"), which I can read but not write to.
At some point I accidentally tried to download a file from a site, using Firefox, to the read-only Windows C drive. Ever since that time, I have not been able to download any files from Firefox, except to the firefox/downloads folder. This is inconvenient. If, in preferences, I try to set downloads to ""Always ask me where to save files", the dialog box does not come up when I actually try to save files. This problem does not apply to saving photos by right-clicking them.
If I open, in text-edit, mozilla/firefox/profiles/t4vockvue.default/prefs.js, which was saved yesterday, I can see a problematic line. It reads:
user_pref("browser.download.lastDir", "C:\\Documents and Settings\\[etcetc]");
C:\\Documents and Settings\\[etcetc] being the read-only windows directory.
This prefs.js is apparently not an editable file.
I tried to fix this by opening a browser tab in Firefox and opening about:config. The editable browser.download.lastDir does NOT show the same "lastDir"....it shows some directory that I successfully downloaded photos to, by right-clicking on a photo.
How can I fix this problem?
Thanks.

To confirm which profile folder is active when you are running Firefox, it is easiest to open it from inside Firefox as follows:
Sometimes the file that stores the customizations becomes corrupted and fails to update properly at the end of your session. You can rename the file and customize from scratch.
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
In the first table on the page, click the "Show in Finder" button (Windows: "Show Folder" button).
Hopefully you are using a separate profile folder on each OS.

BP_HEAD_SEARCH/MainSearchShuffler Defaulting category does not work

Similar Messages

Maybe you are looking for