BPC 7.5 NW - Activate functionalities

Hello all.
I have a new installation of BPC 7.5 NW SP05.
I followed all the steps of the Installation Guide, I can access the Apshell and create
members, dimensions, etc. But now I have some problems/doubts:
- Creating Business Rules, if I do copy/paste of another one, when I select Save it doesn't work.
   If the Business Rule has more than one line, I can only copy the first one. Has anyone had the same problem?
- In the Admin Console, when I try to select Journals to configure them, it doesn´t work. I can view the option to
select it, but when I click in it nothing happens. Is it necessary to configure anything before at any of the servers?
Or at the client side?
Thanks in advanced.
Best regards,
Fernando

Hi Valerio
Thanks for your response.
As regards the BI_Cont 706, you will find more info the same note that you referred. The statement below from note 153967 suggests, NW 7.0 EHP1 & 2 are supported for
The following SAP NetWeaver Releases are pre-requisite for following BI Content Releases, that by definition are grouped into the same BI Content Release Sequence: BI Content 7.01; 7.02; 7.03; 704; 7. 05
1. SAP Netweaver 7.0 (including SAP NetWeaver EhP1 and EhP2): 
The note also says :
SAP NW 7.0  BI Content Add-On 7.06 (BI_CONT 706)
delivered in July 2010.
SP1 is mandatory.
End of maintenance: The BI Content Add-on 7.06 will remain in maintenance until a new BI Content release is delivered or until the underlying SAP BW Release is no longer maintained.
BI Content Extension for BI Content 7.06 (BI_CONT_XT 706)
Delivered in June 2011.
SP1 is mandatory.
Prerequisite: EhP2 for SAP NetWeaver 7.0 AND SAP NW BI Content Add-on 7.06
End of maintenance: The BI Content Extension for BI Content 7.06 will remain in maintenance until a new BI Content release is delivered or until the underlying SAP BW Release is no longer maintained.
As regards the BPC pre-activity I have completed all pre-requisites mentioned in the BPC Inst guide, is there any other doc that I should check.
As for the client I have one client for BI (client 200) and another client for BPC (Client 100), I have activated RSA1 on client 200. I have created the Background user, assigned permissions, setup RSTPRFC, set default BW client BWMANDT etc.
How do I recreate the appshell, by running UJS_ACTIVATE_CONTENT ?
Should I reset anything ?
Appreciate your response.
many thanks
Sreekanth

Similar Messages

  • IP - end of the road? new product but there is a newer one? my goodness

    Hi,
    Some of my friends have done IP projects and become experts in it in 1 year.
    Now, i heard there is a some changes to SAP product for planning by the name of BPC.
    what is going to happen to the following:
    1. IP courses.
    2. IP skills learnt & market value.
    3. IP books and materials. Investments made in IP courses.
    4. IP support packages and the product itself.
    5. Existing customers who just signed to purchase IP or implemented or midway through implementation using IP? Are they given any roadmap to migrate from IP to BPC? How should they plan for the future for their planning system which is new and already, there is a newer kid on the block called BPC?
    6. What is the rationale for giving the world IP and in such a short time kind of providing another product called BPC?
    7. How should IT explain to CEO / CFO about this big change in such a short time? If they knew what is to come, how different will things be?
    8. What is meant by IP will co-exist with BPC? Is BPC not meant to replace IP with same functionality? When will IP be extinct?
    9. How to learn about BPC? What jobs can IP consultants do after the end of IP?
    10. Where is or will be having the most installations for BPC in the next few months?
    Anyone can give your comments on the above questions ?
    Edited by: pointes rexiproca on Mar 5, 2008 3:34 PM

    hi Srin,
    I quote
    "Next In IP u can do only planning but in BPC we have other parts and recently acquired by SAP being good product."
    >>> But there are other even more proven products for consolidation, is there not?
    I quote
    "About Investment On IP: Yes one has invested on IP , in the same fashion SAP also invested ON IP. SAP has decided to goto BPC means they have studied in depth about the product features and found very good and acquired that product and suggesting in future for sap customers also."
    >>> so how long more is IP of market value? As of this year 1H, can i say no more value given even SAP advisng customers not to get IP but BPC ?
    I quote
    "What ever may be the product: Functionality will be the same as earlier we had BPS now IP. A person who knows BPS can get into IP within few days. In the same Fashion with the knowledge of BPS, IP v can go for BPC also easily."
    >>>> if functionalities are the same for planning, is there a need to purchase a 3rd party product? why not just use IP?  BPC has consolidation. What is the use if companies wont be using that?
    I quote
    "BPC consists of Planning & Consolidation also which IP does not have.
    BPC is proven product. I hope for next 3-5 years there will be any more new releases towards planning & consolidation. (Except of new versions: that is default)"
    >>> If customers already using other also proven leading software for Consolidation, does that mean they do not need the consolidation engine of BPC?
    regards
    Pointez Rexiproca
    Edited by: pointes rexiproca on Mar 6, 2008 3:06 PM

  • Adobe Designer 7.0 save button and ID system needed

    Hello, I need help with create save button what works with older version too.
    I have Adobe designer 7.0 pro
    After click save button you can not changes anymore information.
    Then I need ID making system. It would be club ID. ID will be include personal sex, birthday, and filling date.
    EX: 3290580020505 ( 3- male (4-female), 29.05.80 birthday (day,month,year), 02.05.05 means filling date. (day,month,year)
    When person will fill application and she/he choose sex, birthday, then automatically its will create the ID and its possible to see in ID form.
    Then When click Save button then what is ID number then automatically it adds end of the application form name.
    EX: ID is "3290580020505" and pdf application name is "New member". Then After Save name changes "New member- 3290580020505"
    How it is possible to do and when you do not understand what I mean pls let me know.
    I really need something similar system.

    LiveCycle Reader Extensions Server is server product that is used to unlock or activate functionalities in Reader that only otherwise available in Acrobat. By enabling rights to PDF documents, this allows end users who are using Reader to save, fill in, annotate, sign, and submit PDF documents...
    To learn more about LiveCycle Reader Extensions Server, go to
    http://www.adobe.com/products/server/readerextensions/main.html

  • DBIF_REPO_SQL_ERROR while trying to activate ENVIRONMENTSHELL for BPC 10.0 NW on HANA

    Hi experts,
    I'm getting this short dump "DBIF_REPO_SQL_ERROR" while trying to activate the ENVIRONMENTSHELL(UJS_ACTIVATE_CONTENT) for BPC 10.0 NW on Hana database :
    Category                  Resource Shortage
    Runtime Errors         DBIF_REPO_SQL_ERROR
    Short Text
        SQL error "-10760" while accessing program "CX_SY_OPEN_SQL_DB=============CP" part "LOAD".
    What happened?
        Database error text: "Memory allocation failed."
    Error analysis
        Database error text: Memory allocation failed.
        Triggering SQL statement:  "CX_SY_OPEN_SQL_DB=============CP        "
    System environment
        SAP Release..... 740
        SAP Basis level 0005
        Application server... vSAPPRD
        Network address...... 172.16.10.230
        Operating system... Windows NT
        Release.............. 6.2
        Hardware type....... 4x AMD64 Level
        Character length..... 16 Bits
        Pointer length........ 64 Bits
        Work process number... 9
        Shortdump setting. full
        Database server... hana-prd
        Database type..... HDB
        Database name..... PRD
        Database user ID SAPPRD
       Terminal.......... Maha-HP
        Character set C
        SAP kernel....... 741
        Created on....... Mar 21 2014 17:31:58
        Created at....... NT 6.0 6002 x86 MS VC++ 16.00
        Database version SQLDBC 1.00.60.0379371
        Patch level....... 26
        Patch text.......
        Database............. HDB 1.0
       SAP database version. 741
       Operating system... Windows NT 5.1, Windows NT 5.2, Windows NT 6.0, Windows NT
       6.1, Windows NT 6.2, Windows NT 6.3
       Memory consumption
       Roll.... 0
       EM...... 44600400
       Heap.... 0
       Page.... 49152
       MM used. 33089488
       MM free. 4949248
    The program interrupted was SAPLSADB
    Thanks
    Maha

    Hi Maha,
    Please check the versions of:
    HANA server
    HANA client (on HANA server)
    HANA client (on the PAS)
    SAP Kernel (both the generic and HDB specific files)
    The versions between them should be in sync.
    My issue with the error: " CX_SY_OPEN_SQL_DB=============CP        " is resolved by applying the latest SAP Kernel 7.41 Patches which is currently patch level 43.
    Good luck!
    Regards,
    Mike

  • How to activate all these functionalities

    Hi,
    I am on ECC 6.0 but not seeing following buttons, icons or processing options.  These fucntionalities are listed as availble in ECC 6.0 but not able to trace them..  Let me know how to activate and/or locate them.
    1. "Felxible Specs" pushbutton on Results Recording screen
    2. On Results Recoring screen menupath Extras > Transfer Log for copying Inspection Results. Under Extras I see Error Messages list and then next option is Inspector, Date and TIme but no 'Tranfer Log' oeption which is I suppose should appear in between these two options.
    3. Audit management transaction
    4. Stability study transaction
    5. Work overview for quality inspector like a cockpit
    6. Flexible reporting - QMevaluations grahic display
    Thanks

    Hi ,
    Please follow the given below link.
    http://help.sap.com/erp2005_ehp_03/helpdata/en/42/fbded750e61febe10000000a422035/frameset.htm
    Regards,Kundan

  • New Functionalities on SAP FI side in SAP ERP 6.0 EHP4 & SAP ERP 6.0 EHP5

    Hello Team
    I am a FI consulant and now i would like to know the functionalities avialable in SAP ERP 6.0 EHP4 and SAP ERP 6.0 EHP5. So i request you to pleasae check and provide me answers to the below points for my understanding
    1. What are the new functionalities added in SAP ERP 6.0 EHP4 on SAP FI side.
    2. What are the new functionalities added in SAP ERP 6.0 EHP5 on SAP FI side.Finally what is difference between EHP4 and EHP5, i mean in the point of SAP FI functioanliy.
    In the meantime, please provide me the links where i can get complete information on the new functionalities added on FI side in these Enhancement Packages (ie 4/5).
    Yours answers would help me a lot to understand the concept.
    Regards
    Sree

    Enhancements packages contains tens to hunderds of new or changed functionalites (called business functions). After installing an enhancement package you can activate the business functions which can be usefull to you.
    To have an idea which business function can be usefull, you can use the business function prediction. Based on the (FI) transactions you use in the system, it gives an advice which business functions in an enhancement package should be activated.
    See http://www.sap.com/solutions/business-suite/erp/enhancement_packages/business-function-prediction.epx
    and http://service.sap.com/erp-ehp

  • Analyzer Security for SAP BPC 7.5 SP6

    Hi ,
    We have recently installed Analyzer add-in on our excel for Adhoc reporting on SAP BPC 7.5 SP6
    But analyzer is not considering the data security restricted for specific region.
    For eg: If a planner is assinged to EUROPE planning role and when he creates reports using analyzer he is able to see the data for all the regions(NA,EMEA,ASIAPAC).
    Is there anyway we can restrict the planners to see the data relevant to their role in Analyzer.
    we had a look at security in Admin client. Is there anyway to handle this.Thanks much.
    Regards,
    Sanjeev

    Hi,
    You can use Bex analyzer for detailed reporting. Both the analyzer and BPC reports can be connected using the normal excel functionalities (in a single excel workbook) so that BPC CV selection will be fed into Bex as variables and relevant data records are displayed in Bex reports. Performance of Bex analyzer is slow. That is one of the main reason it was replaced with BO reporting tools.
    If you are using BPC 7.5NW, then there is a standard functionality called DRILL THROUGH. Using this functionality you can drill down to detailed data in BW.
    Bex and BPC have different authorizations. You can maintain authorizations in BW roles and try to manually replicate same authorizations in BPC (there is also a how-to doc on automating this synchronization).

  • Getting error while activating content in sap bpc 10

    HI All,
    since many days i was facing an issue while loading my BPC portal .
    i have applied the below medntioned notes as suggested by SAP
    1) 1997203
    2) 2025612
    i have also tried to activate the content by running program : UJS_ACTIVATE_CONTENT
    but after implementing i am getting the attached errors
    as a result i am unable to login in bpc front end
    getting the message as 500-internal server errror
    u have no access to any enviornment
    Kindly Suggest
    Best Regards
    Bhupendra Arya

    Dear Astha,
    i have checked all my roles n authorizations
    all are the same
    i guess thats is not an issue
    Best Regards
    Bhupendra arya

  • BPC Error while loading master data from SAP BW

    Hello Guru,
    I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
    I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are  in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP  and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
    I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
    Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
    Q. Do i need to activate any BADI's for this or not ?
    I appreciate your help in advance. I trie

    Hello Guru,
    Currently i am getting below error while loading costcenter master data from BW to BPC.
    Task name MASTER DATA SOURCE:
    Record count: 189
    Task name TEXT SOURCE:
    Record count: 189
    Task name CONVERT:
    No 1 Round:
    Info provider  is not available
    Application: ZRB_SALES_CMB Package status: ERROR
    Anybody can tell me, if i have missed anything ???
    Regards,
    BI NEW
    Edited by: BI  NEW on Feb 23, 2011 12:25 PM

  • "Edit Report" option getting disabled on saving the report in BPC 10.0

    I have created input schedules using "Edit Report" functionality in BPC 10.0 NW, added a few buttons and corresponding VB code and tested the input schedule by sending data and running data manager package. Everything is working fine. After that I saved the input schedule and closed the Excel. On reopening the excel Add-in and the input schdule, the "Edit report" option becomes disabled and refresh and other functionalities available for the report get disabled. I have faced this issue a couple of times. Has anybody else faced this issue? Can someone let me know the resolution to this problem?

    Hi Shruti,
    This is probably happening because the report/input schedules is not getting connected. Please check the connections once.
    Also if you had named the report in "Edit Report" earlier, say for example "Sales Report", once the report is open you should be able to see this name on the EPM context pane, right side under Current Report: Connected to "Your Model" and below that in the drop down the default selection should be "Sales Report". This means that the report is connected and the Edit Report option is active.
    Hope this helps.
    Regards,
    Bhairavi

  • BPC 7MS new features and advantages

    Hi
    I got the info that the following features cast in BPC 7MS version:
    Management console
    - support for seasonality in Insight
    - multiple hierarchies in time dimension
    - Load Runner test tool certification
    - MS Vista support (only for 32 bit machines)
    - Shared query engine
    - Enhanced BPC logging web interface
    Could any one let me know the advantages of these?
    Best Regards
    Anil Kaalla

    Hi Sorin
    Thanks a lot for your valuable information!
    1. In 5.X also you can have multiple hierarchies by adding additional PARENTHn columns to and then defining the parents for the additional hierarchies
    What is that we are going to have by incluging specifically in the new version?
    2.  Can you also please let me know what has changed between BPC 5.1 and BPC 7.0 on MS stack?
    I have seen BPF functionality have been pushed out from BPC 7 NW stack, the features such as Books, Dynamic heirarchy editor etc. are also included in the list.
    Are there any similiar functionalities pushed out from 7.0 MS stack when compared with 5.1 version?
    Best Regards
    Anil Kaalla
    Edited by: ANIL KUMAR on Oct 16, 2008 11:49 AM

  • How to stop/deactivate CLC (Credit Limit Check) functionalities for specific country

    Dear Experts,
    We are working in TM 8.1 which is integrated with ERP system. Currently we do not have any restriction at TM system level to stop processing the order if CLC limit is exceeding. But we are in process of adapting the same with TM 9.1 version.
    Now, we are in process of upgrading our ERP system and going pilot live for one country initially. We no more want to process the orders/invoices for which CLC limit is exceeding in the latest ERP system for live country for some time. Therefore our business wanted to deactivate or stop the CLC functionalities for specific country or sales organization within TM system, so that statistical record (Internal order) can not be created in ERP. Thus further processing can not be done in ERP.
    Could you please provide some important insights how to achieve the expected?
    Thanks,
    Bharath.

    Dear Dawson,
    Thanks for your reply.
    I have done the required analysis and arrive at below solution.
    Prior to that answering to your question, we are sending CLC to ERP upon activation of FWO. We have a customer specific button 'ACTIVATE' on every FWO UI. Entering CLC amount in Business partner tab is pre-requisite for successful activation of FWO.
    Coming to my solution which I have proposed: For sending the CLC to ERP, we have configured a PPF action definition with schedule condition and processing method call. Currently this PPF action definition is executed successfully upon activation of FWO for all.
    Here we will put a IF condition on sales organization / country for which we do not want to trigger this action, then if it is satisfied with our expected values we will stop further execution. This way we can avoid action triggering. ( I had already checked in debugging and confirmed the behavior).
    I believe, my solution is correct.
    Please advice if any other better way of doing it.
    Thanks,
    Bharath.

  • BPC 10.0 NW - Black data cells

    Hello experts,
    we experienced quite a strange behaviour of our BPC webreports. Some of our reports show black data cells (see screenshot below). The same reports executed in BPC for Excel look perfect.
    [Screenshot|http://img131.imagevenue.com/img.php?image=438462475_BPCError_122_453lo.jpg]
    The column header are greyed out in the screen.
    Anyone any suggestions?
    Thank you in advance,
    Karsten

    Hi Karsten,
    I deleted the environmenshell by running the program UJS_ACTIVATE_CONTENT, it was deleted successfully, but when I again ran the same program with selection as all the remaining options apart from delete/clean the environment (i.e . activate the content, activate the environment, etc), it gave an error - UJT_EXCEPTION, Message Type I, Message Number - 109, There is no environment dependent entity to be imported.
    When I check in rsa1, infoarea corresponding to environmentshell is not found at all.
    Did you get such an error message while activating the environmentshell again?
    Which option did you use clean the environment or delte the environment?
    Any help on the error appreciated.

  • BPC 10.0 NW - Matrix structured security

    Hej Gurus,
    I have been searching the internet for information about the possibility of doing matrix structured security in BPC 10.0 NW.
    I have found that it is possible to do in 7.5 using a BADI, and I know that it is standard in BPC 10.1. However, I have not found a conclusive proof of it being possible in BPC 10.0 NW, can somebody please confirm og decline the possiblity of using security structured security.
    If it is possible, how can we acheive it?
    Best regards,
    Mikkel Kristensen

    Hi Gersh,
    It seems to be a hidden feature within BPC 10.1.  For example it is not mentioned in the security guide.
    What is needed is some sort of how to guide for this.  In fact there are no how to guides for BPC 10.1 at all!!  Something I find surprising as the product has been GA for several months.
    You said that it is delivered and works in 10.1.  Can you please explain how to activate and implement it.
    Regards,
    Mark

  • BPC NW - Action pane not appearing in excel client

    Dears,
    I am working with excel (2003 SP3) BPC 7 NW client on my laptop, remotely connected to a WDF server (windows vista).
    I just cannot activate the BPC action pane from the etools menu. I have already tried under .xls , xlt and .xltm formats.
    It seems the BPC macros are not correctly installed.
    Could anybody kindly give me a solution please?
    Regards,
    Axel.

    What version of SAP BPC NW are you using?
    Windows vista is not supported before SP2 of SAP BPC 7.0 NW which will be released 13 March 2009.
    Regards
    Sorin Radulescu

Maybe you are looking for

  • Error message downloading j2se 1.5.0 on windows XP home edition (SP2)

    Hello: I am getting the following error message attempting to install the j2se 5.0 on my windows XP home edition (SP2): "Error JavaTM installer The installer cannot continue because the files necessary for installation are unavailable. If trying to i

  • Dell Studio XPS Desktop

    Are there anymore Studio XPS desktop? Im pretty crappy with computers xD so idk the original name or w.e... It was on dell site a few days ago....$1,149 i7 Processor.. 8GB DDR3 Ram and some other stuff...it was on sale...idk if its on bestbuy.. cuz w

  • Clicking mouse

    hi, recently my mouse button on my macbook has been making a wierd clicking noise, which is quite offputting as i have only had it since november! sounds like it is loose, it does it when i just rest my finger on it.

  • Can not create promoted links

    HI ! i can create promoted link list in SC but not in subsite. is there any action so i will be able to create promoted link list  in my subsite ? thanx, nikita

  • VST instruments causing Premiere Pro not to load

    I just ordered the Native instruments Komplete 9 vst instruments and now since that is loaded on the computer I cant even start PP. I use CS5 and I don't want Adobe premiere pro to load my vst instruments because I will NEVER use them in this program