BPC 7.5 SP08 - Transaction Data mapping Issue

Hi All,
The staging cube in BI is updated without 'entity(company code)' which has value as zero, only some records.
when i pull reported data from BI to BPC, the records with the above zero record is not updated, because there is no entity.
In my mapping file, i am trying to skip, the records with no entity, but unable to do so.
(ENTITY=IF(0COMP_CODE=str() then skip(); 0COMP_CODE))
below is my mapping formats.
ACCOUNT=0GL_ACCOUNT
COSTCENTER=IF(0COSTCENTER=str() then *str(NONE_CC) ; 0COSTCENTER)
CATEGORY=0VTYPE
DATASRC=*NEWCOL(D00)
ENTITY=IF(0COMP_CODE=str() then skip(); 0COMP_CODE)
TIME=0FISCPER
AMOUNT=0AMOUNT
RPTCURRENCY=0CURKEY_LC
Any inputs ...
Thnaks

Hi,
I dont think you can use skip() function like that. If you dont want to load records if company code is blank, then use the LOAD_INFOPROVIDER_UI process chain and give the selection, there. You can specify something like company code not equal to blank.
Hope this helps.

Similar Messages

DP - Master Data & Transaction Data mapping

Hi APO Gurus,
I need to create a document for mapping APO DP master & transaction data to the fields of a logical modelling DB.
I would appreciate if any of you have any information as to how to go about it or if you have any similar doc, please email me at [email protected]
All your help is highly appreciated.
Regards,
Ritu

Hi ritu,
What exactly is your requirement. Unfortunately I am a functional consultant and not the best person to give technical details. However please note that APO especially DP does not store data in only DB tables (like R/3), instead uses liveCache which is based an OODB. The transactions access data in liveCache through standard COM routines. The SAP suggested way to access data to and from liveCache is through use of BAPIs.
The other point to note is that APO-DP is totally customisable as per client requirement. That is to say while there is some standard business content provided (by way of some characteristics, keyfigures and couple of planning areas) most clients created their own content - starting from characteristics, keyfigures, planning object structure, planning area, planning book/data view etc. As a result it is difficult to give standard field names for mapping.
DP Master Data is actually Characteristic-Value-Combinations (CVCs) that are based on the custom characteristics defined in the Master Planning Object Structure. Transaction data is timeseries data in keyfigures which is defined in the Planning Area. Since all these objects are customisable - standard field level mapping may not be possible.
Hope this helps.
Thanks,
Somnath

Question on BW data and R/3 transaction data mapping

Hello Expert,
How can we find the transactions to mapping the data in BW and R/3?
For example, DS 2LIS_04_P_COMP is for extraction component of order. We can change the component requirement in R/3. After that, a delta will post on delta queue. However, I find the posting date is in initial. Is there any other transaction which will affect the DS delta?
How to find the corresponding transaction in R/3 to a given DS?
Thanks
XY

Himanshu,
I agree with Sam's post.
If you are reporting on the Basic Cubes then the data will be stored in the BW system and if you are reporting on Remote cube then you wont find any data in the cube, since it is a virtual infoprovider.
Moreover, if you are doing full update then schedule the infopackage once again then it wont show the records which you have deleted from the tables. It will update only the records available in the table and then you can report on that.
Hope it helps...
Regards
Gattu

BPC 7.5: Import Transactional Data Error

When trying to run the Import Transactional Data package, the load will complete successfully (and all the data gets loaded), but when I go to view the log file I see the following error.
Task name LOAD:
BAdi not implemented for appset <APPSET>, dimension TIME, rule 00000001
We recently transported this from our DEV system to our TEST system. There are no errors showing in the DEV system and everything transported correctly. Any ideas on why I may be seeing this error?

Hi Howell,
Any clue on how this error was resolved?
We are facing this problem now in 7.5 SP13, in exactly the same scenario after transport.
Appreciate if you could let us know.
Thanks.
Best Regards,
Karthik AJ

Transaction data load issue

Hi,
I am new to BPC and have an issue, our system in production getting an load error which is thrown packge and details are below,
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 137 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZFIG
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\P_L_ACTUALS.xls
CLEARDATA= No
RUNLOGIC= Yes
CHECKLCK= No
[Messages]
Task name CONVERT:
No 1 Round:
Number of rejected records 501 exceeds the max reject count 500
Record count: 220000
Accept count: 143627
Reject count: 501
Skip count: 68661
Application: FINANCE Package status: ERROR
Can somebody please help me how to proceed with such errors..is there any standard table like BW where we can see the records..
thanks
Raj

Hi,
Its because of the rejections. See why the records are bing rejected. If you want to simply increase the no of records being rejected change the following options in the transformation file
MAXREJECTCOUNT=10000
specify a desirable number and then analyse the rejected data in the package log.
Thanks,
Sreeni

ESB Data Mapping Issue: Urgent

Hello,
We have a ESB Process.
In ESB Routing rule we are mapping source Xsd to Target Xsd. Both XSD's have 100 field.
When We Invoke the ESB Process, It's completed with error. We know the error reason (That is: Target field size is shorter than what we are getting in the source field.)
We wanted to know which field is causing a error in ESB.
Can we capture the error (i.e. Which target field size is shorter), If yes then what are the different ways to track this error.
Any help on this appriciated
Thanks,
AB

Hello Adam,
Thanks for your reply. Can you tell me the location of log file.
is ther any another way to track this error.
Thank youm
AB

ESB Data Mapping Issue

Hello,
We have a ESB Process.
In ESB Routing rule we are mapping source Xsd to Target Xsd. Both XSD's have 100 field.
When We Invoke the ESB Process, It's completed with error. We know the error reason (That is: Target field size is shorter than what we are getting in the source field.)
We wanted to know which field is causing a error in ESB.
Can we capture the error (i.e. Which target field size is shorter), If yes then what are the different ways to track this error.
Thanks,
AB

Hello Adam,
Thanks for your reply. Can you tell me the location of log file.
is ther any another way to track this error.
Thank youm
AB

Map BW attribute to BPC Dimension during transactional data load

Hi,
I am loading the transactional data from BW cube to BPC Application. we ave functional area as dimension in BPC and the BW cube doesnot have Functional area. So we are in a situation to derive it . Dimensio Profitcenter of BW has functional area as Attribute. so we need to populate the BPC functional area with the BW functional area which is an attribute of 0PROFIT_CTR.
Any Input will be appreciate.
Sanjay

Hi,
You can try following work around (Multiprovider on infoset)
BPC NW: Navigational Attribute in transformation mapping?
or
use [BADI for Start routine and End routine|http://help.sap.com/saphelp_bpc75_nw/helpdata/en/28/b66863b41f47589b9943f80b63def6/content.htm] to read respective attribute from master data of 0PROFIT_CTR .
hope it helps...
regards,
Raju

Load transaction data from ECC to BPC 10.1 using US GAAP starter kit SP3

I need to understand a bit more the process to load transactional data into BPC 10.1. We have US GAAP Starter Kit SP 3. Below is an screenshot from the config guide:
It explains how transactional data can be extracted from ECC system to the SAP Netweaver BW data source 0FI_GL_10 and then transform it
to get it loaded into BPC. The Objects /PKG/FC_C01 and PKG/FC_DS01 are just mentioned here as reference because they come in the RDS for Financial Close and Disclosure Management, which not all companies have.
I believe the upwards data flow should be from Data Source 0FI_GL_10 to Data Store Object 0FIGL_O10 and then to InfoCube 0FIGL_R10. There is also a data flow that goes from 0FI_FL_10 to InfoCube 0FIGL_R10. Can anyone with experience with US GAAP starter kit answer this?
Thank you.

Hello, we were able to load actuals to our environment with the US GAAP Starter Kit, SP03. I followed the Operating Guide document up to section 5.2 and ran the Consolidation Data Manager Package with no issue. We are using the A20 Input and A20 Consolidation process flows based on flows F00, F10, F20, F30, F99, etc... According to the documentation, the Statemnet of Cash Flow and Changes in Equity should be automatically calculated and available from the changes
in Balance Sheet accounts once Consolidation is completed . However, when I ran the corresponding reports, they bring no data.
We loaded actual data for the whole 2013 and Jan 2014. Our intention is
to run the first consolidation for Jan 2014. The closing balance for period 12.2013 in flow 99 was copied to flow 00 2014 (opening balance). Flows 20 and 30 were updated with the corresponding balance sheet movements (increase/decrease), according to the delivered controls in the starter kit. However, cash flow is still showing no results.
I found the following text in the operating guide, but I am not clear if I am missing a step. Can you please clarify? This is telling me that I need to copy my 01.2014 opening balance (F00) to 12.2013 closing balance (F99, which is done by the copy opening data manager package, but in the opposite direction, from Y-1 F00 to Y F99) and in addition to also copy that balance to 12.2013 F00 (previous year opening balance)??
"5.2.2 First Consolidation
When operating the consolidation for a given Scope for the first time in the application, it is necessary to populate and process the prior year-end time period for this Scope, in addition to the first required consolidation period. This is because the flows dedicated to the scope change analysis are properly populated by the consolidation engine provided that at least one automatic journal entry has been detected in the consolidation used as opening consolidation, which by default is the prior year end (December, Y-1). To accomplish this, it is recommended that you copy all input-level opening data of the first required consolidation (flow “F00”) into the closing data (“F99”) and opening data (“F00”) of the prior year-end time period, including intercompany breakdowns.
This breakdown by intercompany in the balance sheet triggers automatic eliminations, which are carried over to the closing position. After the consolidation process, the closing data of the prior year
end time period will contain the appropriate source data for the opening data of the following consolidation, notably the opening automatic journal entries.

Problems with BPC Export Transaction Data process chain

Hi everybody,
we are trying to implement the procedure "How to Export BPC Transaction Data using a custom process chain " for SAP BPC NW 7.0 and everything seems fine. However, when we execute it from Excel, the package apparently runs well (the message 'IMMEDIATE RUN: The package is running...' appears) but when we go to the watch the package status, the package does not appear in the list and there is not any file exported.
When we go to watch the log of the process chain from NW, the Modify Dynamically step runs wrongly but there is no clue of what could be done to solve it. We have done it again from scratch but we always have the same error.
Any idea out there?
Thanks in advance. Kind regards,
Albert

Hi Rich,
in the end we managed to export data. Our NW administrator created the custom process type wrongly - putting a blank space before ZBPCTXEXP - and now it has been corrected and everything works fine.
Well we have managed to transport applications to one server to another one and to export/import the transactional data.
Is there any doc that explains how to transport process chains from one server to another?
In BPC Opps manual there is not too much information and we should transport quiet a lot of process chains related with Runlogic issues .
Thanks a lot for your help.
Kind regards,
Albert Mas.

Import Transaction Data from BW Cube to BPC Cube

Hi,
Is there any document that explain how i can import/copy transactional data from bw cube to bpc cube like this below pic. http://img841.imageshack.us/img841/6998/prof.jpg
Thanks in advance.

Hi Again,
With these documents I can import transactional data with a single keyfigure but if there are more than one keyfigure, importing and assigning keyfigures to dimensions might get confusing.
For example i have two keyfigures "zbgstsad" and "zbgstsf" in bw cube and I have two account member in "S_ACCT": "S_F", "S_A". I did a conversion file with "zbgstsad(ext)->s_a(int)" and "zbgstsf(ext)->s_f(int)" rows. But i am not sure what i have to put instead of "?".
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
CONVERTAMOUNTWDIM=S_ACCT
*MAPPING
RPTCURRENCY=0CURRENCY
S_ENTITY=ZBGENTITY
S_ACCT= ?
S_TIME=0CALMONTH
S_CATEGORY=*NEWCOL(ACTUAL)
S_OB=0UNIT
S_URUNLER=ZBGURNLR
AMOUNT= ?
*CONVERSION
S_ACCT=[COMPANY]B_ACCT.XLS!CONVERSION
TIME=[COMPANY]B_TIME.XLS!CONVERSION
What do you recommend?
Thanks in advance.
Burak
Edited by: boguner on Aug 9, 2010 2:34 PM
Edited by: boguner on Aug 9, 2010 2:40 PM

BPC 7.5 NW: Loading transaction data from infocube

Hello, I am trying to load transaction data from an infocube into a BPC application using a package based on /CPMB/LOAD_INFOPROVIDER.
The master data (cost center and cost element) are already loaded. As they are compounded, we have added in the key the CO area (eg ID=0CO_AREA+ID)
I am facing an issue that the system ads leading 0 in front of the values of those master data comming from the cube.
So the data looks like CO_AREA00000000000cost_center.
As the data where correctly loaded in the dimensions (CO_AREAcost_center), the loading fails.
How can we remove those 'O'?
Thanks!

Hi Anton,
We use this in most of our projects; since auditing is one of the important requirements.
You should enable the auditing for selective categories only. With each transaction data entered, it will keep a log, which can increase the size a lot, and hence impacting the performance.
If you are enabling the log, you should frequently purge the audit data as well. However, you should take a backup of this and then purge it.
Hope this helps.

Transaction data from BI TO BPC : cube error

HI Guru's,
We are trying to load transaction data from BI to BPC ,now my requirement is does it possible to bring transaction data from BI Mulitprovider or SIMPLE Mulitprovider.
While we are loading the data from Multiprovider we are finding the following Error:
Error occurs when loading transaction data from other cube
Application: Ext_Rev_COS Package status: ERROR
Following is the Mapping :
*MAPPING
Category=*NEWCOL(ACTUAL)
Contract_Curr=ZSD_I06___F60
Customer=ZSD_I06___F10
Customer_Type=*NEWCOL(None)
Destination_T0=ZSD_I06___F14
Entity=ZSD_I06___F22
LeaseType=ZSD_I06___F133
Origin_From=ZSD_I06___F13
Product=ZSD_I06___F210
P_ACCT=*NEWCOL(P10020)
RptCurrency=ZSD_I06___F61
SKU=ZSD_I06___F11
Time=ZSD_I06___F59
SignedData=ZSD_I06___F68
*CONVERSION
Time=TIME_FISPER_CON.XLS
CUSTOMER=CUST_CON.XLS
Appreciated for your valuable Answers and Time.............
Thanks in advance..............

Hi,
Please refer to these SAP Notes:
1562812 - Failed to load data if there are lots of rejected data -BPC 7.5 NW
1689203 - Error occurs when loading transaction da
I believe that the first one will do the trick.
Hope these help.
Regards,
Vin

SAP BPC 7.5 - Netweaver- File Upload -Transaction data along with comments

Hi,
We have a requirement to upload a file containing comments along with transaction data.
We are planning to store commnents in a Ztable from the flat file and read and post comments in the BADI
using UJC*Add_cmt.
Use a custom process chain to execute the above steps and link to a pakage.
Please let me know if there is a better process/how to doc and any code for the above.
Your early reponse is much appreciated.
Regards,
Venkata

Hi Venkata,
*MVAL function allows you to use multiple time period columns. I don't think this may help your scenario. I my opinion you may need to use two transformation files to bring the data from BW cube to BPC. BPC is an account base model, I don't think you can load the data in two columns in BW cube using one transformation file.
Thanks

Error while loading transaction data from an Infoprovider Mapping C_ACCT

Hi Gurus,
We are implementing BPC Consolidation for NetWeaver 7.5, and we're facing the following situation:
We have loaded master data from 0RC_ACCOUNT (group account) to our dimension C_ACCT without a problem, but when we run the loading package from an infoprovider 0FIGL_C10 (Transactional Data), the following error message appear:
Dimension: Member C_ACCT: 000 not valid
We already check data in source InfoProvider and there's no record with 000 account value.
Any suggestions?
Thanks in advance
Best Regards
Abraham Méndez

Rad,
See if SAP note# 492647 & 849501 is of some help in your scenario.

BPC 7.5 SP08 - Transaction Data mapping Issue

Similar Messages

Maybe you are looking for