BPC Client tool configuration for multiple appset selection

Hi Expert,
is there any way to configure BPC client to select multiple applications simulteniously instead of closing one application to select another application, nothing but multiple BPC sessions at a time like SAP GUI sessions.
thanks
Venkata

Hi,
I guess you are talking about BPC excel. You cant have different sessions in BPC. If you open a report1 from application1 and then if you want to open report2 from application2, you need to change the CV. Once the report2 has been opened in application2, the CV of report1 will still show application1. However, if you want to refresh report1, it will access application2. The CV of the last opened report holds valid for all the previously opened reports.
Having said this, we do have a workaround for the above problem. When you open report1 from application1, go to workbook options and click on "save the active session CV with this workbook". Then you can change your CV to application2 to open report2. And again do the same thing for report2 as well. With this, both the reports will work in their own region. However, you wont be able to change the CV. Even if you do change the CV, the report will not be refreshed based on the new CV. It will still work for the saved CV.
Hope this helps.

Similar Messages

BPC Client tool

I am new to BPC ... Where can I download the BPC client tool to connect to server. Do you need a GUI client or is it a web based client similar to Visual Composer?
Thanks

Hi,
There 2 clients for SAP BPC NW.
They are both available on the BPC Web portal (http:
SAPBPCWEBSERVER\osoft)
From the BPC portal you will find a link to client download page (don't remember its name).
Note : As you will be authenticated on IIS, your domain account must be recorded in SAP BPC security first. Ask your SAP BPC administrator. You also must be local administrator privilege on your computer in order to install them.
The first client is the "Admin" client : It will allow you to manage Appset and application / dimensions / security ... etc.
The second client is a Microsoft Office plugin : It will allow you to access SAP BPC appset within Excel.
Both requires some technical prerequisites on your computer. Check the online guide on SAP Marketplace or run the client diagnostic tool from the SAP BPC portal page.
Good luck and welcome.

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1

The file size of selected file in input file control is shown as 0 for multiple file selection in Safari 5.1. If you select single file, then it is able to return file size correctly. However, if you select multiple files, then the file size of each of the selected file is always returned as 0 from javascript. This works correctly in Safari 4.0 but it does not work in Safari 5.1.
How do I get the correct file size in Safari 5.1 ?

If you want to post (or send me) a link to the lrcat file, I'd take a look at it for you, and give you a break-down what's consuming all the bytes. But it might be fun to learn how to do that yourself (e.g. using SQL). I use SQLiteSpy, but other people have their favorites.. (or you can use a command-line client if you prefer..). One way: just run "drop table "{table-name}" on each table then look at filesize (do this to a copy, not the real thing).
Anyway, it's hard to imagine keywords and captions etc. taking much of the space, since even if you had 1000 10-character words of text metadata per photo average that still only adds up to 117MB, which isn't a substantial portion of that 8G you're seeing occupied.
Anyway, if you've painted the heck out of most of them and not cleared dev history, that'll do it - that's where I'd put my money too...
One thing to consider to keep file-size down:
===================================
* After reaching a milestone in your editing, take a snapshot then clear edit history, or the top part of it anyway (e.g. leave the import step), using a preset like:
Clear Edit History.lrtemplate
s = {
    id = "E36E8CB3-B52B-41AC-8FA9-1989FAFD5223",
    internalName = "No Edit",
    title = "Clear Edit History",
    type = "Develop",
    value = {
        settings = {
            NoEdit = true,
        uuid = "34402820-B470-4D5B-9369-0502F2176B7F",
    version = 0,
(that's my most frequently used preset, by far ;-})
PS - I've written a plugin called DevHistoryEditor, which can auto-consolidate steps and reduce catalog size - it's a bit cumbersome to use a.t.m. but in case you're interested...
Rob

How to execute a MTS (Master Test Script) in SAP ECATT Test Configuration for multiple variants.

I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
Below thread is similar to my requirement but I am not able to understand the solution properly.
eCATT - how to run multiple test scripts with input variables in different test scripts?
Any help in this case would be highly appreciated.
Thanks & Regards,
Vaibhav Gupta

I have a MTS (Master Test Script) which references 4 Test Scripts. As of now, I am able to run this MTS directly by opening it as a Test Script and running it for default test data.
Now, I want to run this MTS in SAP ECATT Test Configuration for multiple variants/test data. I am not able to see any parameter if I enter MTS in the Test Configuration.
Below thread is similar to my requirement but I am not able to understand the solution properly.
eCATT - how to run multiple test scripts with input variables in different test scripts?
Any help in this case would be highly appreciated.
Thanks & Regards,
Vaibhav Gupta

BOBJ 4.0 Client Tools Configuration Help

i have 32 and 64 bit System DSN setup on the server using the 2005 drivers. 4.0 was installed with 2008 Express. i'm not sure if that has anything to do with it? dumb question, should it be set to the db or cms db?
i don't remember configuration being this confusing.
here's what it shows in CMC settings:
Image link
sia properties:
Image link
setting up new connection, i'm trying to use the credentials for the boe140 db. someone tried connecting to the SQL 2005 db and that makes a connection but i get errors.
Image link
created a new connection using IDT and the test worked:
Image link
imported and used the new connection for the universe i need. the test worked:
Image link
error in crystal reports:
Image link
webi error:
Image link

You would need to have 64-bit DSN to install BO. during the installation the DSNs are created automatically. This is what you showed us in the images.
Many client tools use both 32-bit / 64-bit drivers. This helps them to talk to CMS Db in right way. You were using a CMS Db connection to create Universes , crystal reports and webi reports. Please note these client tools retrieve data from Db's other than the CMS Db usually. It is not recommended and suggested to have data made out of CMS Db. You should use the audit Database to know about the activities happening within the server.
good luck!!

How to set a payload field value only once for multiple instances selected?

The user needs to set a payload field value and then he can approve the task so the task can continue through the process, that's fine when the user selects one instance and sets the value in the task details section and then clicks the approve button, but how do we achieve the same behavior in a multiple way?, I mean the user can select multiple tasks in the workspace (in this case the details task page is not available and instead the following label appear "Multiple tasks selected") then if the user clicks the Actions drop down -> APPROVE he only gets the message "your request was processed successfully", so how can the user modify the payload field value only once for all the selected tasks so when he clicks APPROVE the value is populated in all the instances selected.
Thanks,
Carlos.

In the action which displays the edit page just set the form idx value before displaying the jsp.

Custom property renderer for multiple value selections of property metadata

Hi,
We have created custom predefined metadata properties and fetching data from SAP to display values while uploading a document from KM.Everything is working fine and values are being displayed in a dropdown.
The standard property multi-valued displays values in checkboxex but the requirement is to allow for multiple selections in dropdown using shift ot ctrl key.
We started creating our own property renderer by decompiling classes like allowedvalues_multivalued
but we could not see the property on the upload screen.
Any help is greatly appericiated.
Thanks,
Vasu.

Vasu,
Try changing the property renderer setting in your custom property. There might be one which allows a multiple select box. If not, you can always create your own. The following links are helpful:
https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5800
https://www.sdn.sap.com/irj/sdn/nw-cm?rid=/library/uuid/f7b176eb-0701-0010-2b84-8edb1f76771d
Andrew

For multiple item selection in Table

Plz use this code and paste it in perticular event of button. when u excute the application ,To select multiple items plz catch shift in keyboard otherwise u can select only single item.
int n = wdContext.nodeProducts().size();
    int leadSelected = wdContext.nodeProducts().getLeadSelection();
    // loop backwards to avoid index troubles
    for (int i = n - 1; i >= 0; --i) {
      if (wdContext.nodeProducts().isMultiSelected(i) || leadSelected == i) {
        wdContext.nodeProducts().removeElement(wdContext.nodeProducts().getElementAt(i));

Hi Vishal
Thats the way the webdynpro table has been designed to work for multiple selection...on click of the Ctrl key or Shift key. There is no other alternative for this.
What would your question be?
Thanks
oj

Critical :MIRO TRANSACTION-POP UP SELECTION FOR MULTIPLE VENDOR SELECTION

Hi experts ,
I have a requirement in my project in which AP ( accounts payable ) requires pop up selection box in MIRO when there are multiple remit to address exist for the same vendor.Currently AP does not have the ability to see when mulitple remit accounts exist for a vendor.   This is causing payment to be sent to the wrong place.so the requirement is 1.Modify the MIRO transaction to determine if a multiple remit-to vendor scenario exists and issue an info message to the user so that he/she can perform a vendor search.
Modify MIRO to Issue Info Message for Multiple Remit-to Scenario
If possible, find an appropriate BAdi or user exit where an info message can be issued. The message must be issued after entry of the purchase order number.
Determination of a multiple remit-to case is as follows:
-     User in transaction MIRO enters a value in the purchase order number field and presses enter or other function key
-     In exit code:
o     the vendor number is determined from the purchase order entered
o     the vendor master is then searched and the following vendor records are returned as matches:
     ADBR remit-to vendors defined as partners to the purchase order vendor number
     Vendor records with the same tax ID number as the purchase order vendor number
     ADVN vendor records with the same value in LFA1-ZZMCOD2 in the first 12 characters only
     Include the vendor number defined to the purchase order number entered
o     If the search returns more than one vendor record, then issue the info message u201CMultiple remit-to vendors may exist. Please validate vendor on PO with vendor on the invoice.u201D
can anybody provide any inputs in this.
regards
Prasun

I have wondered about this for a while. I was trying something tonight and it seemed to do what you need. I suggest you save your document before trying it.
Select one of your popups.
Copy Style
Select all the popups
Paste Style
With all selected, go to the Inspector and add another item to the list.
All popups should now have the new item. The selected values should not have changed. Copy/paste style is required to make this work.
Please let me know if this works for you. I've tried it a few times and it seems to do the trick.

Best Configuration for Multiple Video Captures

Hello,
What would be faster and the most efficient for multiple video captures:
- 9 video feeds written to 3 separate internal hard drives (3 feeds per hard drive)
- 9 video feeds written to 3 internal hard drives in a combined RAID configuration
- 9 video feeds written to 9 separate external hard drives via eSATA
I have a Mac Pro 3.06GHz 12-core Intel Xeon machine that will be dedicated to a security camera application (SecuritySpy). The Mac OS and SecuritySpy will be on one hard drive and send the captured video from nine network HD cameras to the other hard drives. The computer, eSATA card, and all the hard drives are 6Gb/s capable. I also have access to SoftRAID for the RAID configuration, as well as an 8-bay eSATA hard drive enclosure if I choose. There are pros and cons for each of the configurations, but I am looking for the most reliable setup in terms of efficiency and longevity.
“Technological change is like an axe in the hands of a pathological criminal.” (Albert Einstein, 1941),
Dr. Z.

Just wanted to post the details of my final set up, maybe this will be useful to others looking to do a similar setup:
1. Connected and set up the external hard drive (I bought a Western Digital My Book Pro Edition II 1TB) via Firewire 800 on iMac #1.
2. Set up iMac #1 to backup via Time Machine. Even though the other computers will see the drive, apparently they will not recognize it in Time Machine unless you set it up on the computer the drive is connected to first (I tried).
3. On iMac #2, connect to iMac #1 via file sharing, this is even easier now that you can access any computer on your network under "SHARED" in the sidebar of any finder window.
4. Double-click the external drive. If you don't see the drive, click "Connect as" in the top right of the window and login. It's not necessary to do this, but if you want to confirm you've connected to the network drive, you can go to Finder -> Preferences -> General and under "Show these items on the Desktop" check the box next to "Connected Servers". This will make an icon for the external drive appear on your desktop.
5. Turn on Time Machine on iMac #2. Repeat for any other computers you want to back up.
That's it. So far this has worked great for me. Obviously the backups run a little slower on the computers running through file share, but its a small trade-off compared to either manually moving the drive around or getting three separate drives.

DYNP_VALUES_READ Limitations for multiple lines select options

Hi all !
   First post here, but a tough one I think. Here is my inquiry :
   I have worked on an specific abap function used in many long abap list reports. Theses reports are launched in background processing. The aim of this routine is to stop the report execution if a background job with the same selection parameters is already launched for the current user (to Prevent useless several launch of a time-expensive program).
    Because this routine is dynamic, I read the selection screen of the current report with the function 'DYNP_VALUES_READ'. And I compare the result with the variant of the backgroung job (read with function 'RS_VARIANT_CONTENTS').
    The real problem is that function "DYNP_VALUES_READ" only extract the first line of select-options. I found an alternative solution to extract the select options values (a dynamic assign with field symbols), but external conversions (for WBS elements for example ) are lost, so the comparison detects differences between the background job's variant values and the current selection screen values.
    Does anybody know a way to get entire select options values from a selection screen just as they are displayed on screen ?
Thanks for reading my message
Message was edited by: Thomas BRICOUT

Thomas,
Perhaps the following code will help you. A function module in the code captures everything on the selection screen into an internal table. It doesn't actually capture the information the way you want it, but I believe you will be able to work with it to achieve your desired result. If it doesn't meet your needs, it is still useful for printing selection screen fields and their values.
Bruce
report zybttes2.
tables: zf137,   " 137 General Ledger Document Details Table
        zf137a. " 137 General Ledger Document Details Table, Archive
selection-screen begin of block b1 with frame title text-004." BCT003
parameters: p_zf137   radiobutton group xxx,                " BCT003
            p_zf137a radiobutton group xxx.                " BCT003
selection-screen end of block b1.                           " BCT003
selection-screen begin of block parameter with frame title text-001.
selection-screen skip 1.
select-options: s_date for zf137-zzpostdat.
selection-screen skip 1.
selection-screen begin of line.
selection-screen comment 3(6) text-002.
selection-screen end of line.
selection-screen skip 1.
select-options: s_loan for zf137-zzloan.
selection-screen skip 1.
selection-screen begin of line.
selection-screen comment 3(6) text-003.
selection-screen end of line.
selection-screen skip 1.
select-options: s_ccentr for zf137-zzcostctr.
selection-screen skip 1.
selection-screen end of block parameter.
data: ww(3) type n.
data: zz(3) type c.
data: c1(1) type c value '0'.
do 2 times.
ww = ww + 1.
zz = ww. shift zz left deleting leading c1.
write: / zz.
enddo.
Capture and then print the selection screen fields and their values
data: begin of i_info occurs 20,
        flag,
        olength type x,
        line like raldb-infoline,
      end of i_info.
call function 'PRINT_SELECTIONS'
exporting
    mode      = 'TABLE'
    rname     = sy-cprog
    rvariante = sy-slset
tables
    infotab   = i_info.
loop at   i_info.
write: / i_info-line.
endloop.
write: / 'end'.

Report help for multiple Date Select options

Hi Friends,
For a particular year wise report, the client wants 12 date select-options which are changeable and informal every year .The report will also be displayed as per the given date selection period wise. Please help me how to fetch the datas from the table as per the given selection period. Currently the report have one date select-option where the user gives selection range as 1.04 to 31.03. It's related to EB power consumption report and hence the new requirement on date selection which are informal and not a fixed date of every year.
Ex:Selection-Screen
Period 1 : 08.04.2008 to 12.05.2008
Period 2: 12.05.2008 to 20.06.2008
Period 3: 21.06.2008 to 28.07.2008
Period 4: 29.07.2008 to 15.08.2008
Period 5: 15.08.2008 to 21.09.2008
Period 6 : 21.09.2008 to 14.10.2008
The data will derive as per the above selection ranges.......
Please advise with example.
thanks & regards
Sankar.

>
sankar babu wrote:
> Ex:Selection-Screen
> Period 1 : 08.04.2008 to 12.05.2008
> Period 2: 12.05.2008 to 20.06.2008
> Period 3: 21.06.2008 to 28.07.2008
> Period 4: 29.07.2008 to 15.08.2008
> Period 5: 15.08.2008 to 21.09.2008
> Period 6 : 21.09.2008 to 14.10.2008
Hi,
In this case just derive all records matching dates between 08.04.2008 (low in first select-options) and 14.10.2008(high in last select-options.
Also my advice is to use a single select-options and prompt the user to give the dates as ranges in the multiple entries dialog which can be opened by clicking the button on the right side of the select-options.
Regards
Karthik D

Exception thrown in External Tool Configuration for Availability

Within JDeveloper version 10.1.3.4.0.4270 (have also seen the problem in 10.1.3.3), when trying to configure an External Tool the Availability tab on the "Edit External Tool" wizard is not being displayed. This option had previously been configured ok within JDev 10.1.2
From main menu I select: Tools -> External Tools... -> (select any tool) -> Edit...
Tab options for External Program Options, Display, Integration are all selectable and editable, attempting to select tab option "Availability" appears to do nothing but an exception can be seen (when running jdev.exe instead on jdevw.exe) in the following partial stack trace:
java.lang.NullPointerException
at sun.text.UCharacterIterator.<init>(UCharacterIterator.java:46)
at sun.text.UCharacterIterator.getInstance(UCharacterIterator.java:71)
at sun.text.Normalizer.setText(Normalizer.java:1045)
at java.text.CollationElementIterator.setText(CollationElementIterator.java:479)
at java.text.RuleBasedCollator.compare(RuleBasedCollator.java:406)
at oracle.jdevimpl.externaltools.ui.AvailabilityPanel$1.compare(AvailabilityPanel.java:212)
at java.util.Arrays.mergeSort(Arrays.java:1284)
at java.util.Arrays.mergeSort(Arrays.java:1296)
at java.util.Arrays.mergeSort(Arrays.java:1296)
at java.util.Arrays.mergeSort(Arrays.java:1295)
at java.util.Arrays.sort(Arrays.java:1223)
at java.util.Collections.sort(Collections.java:159)
at oracle.jdevimpl.externaltools.ui.AvailabilityPanel.populateAvailableTypes(AvailabilityPanel.java:216)
at oracle.jdevimpl.externaltools.ui.AvailabilityPanel.loadOptions(AvailabilityPanel.java:291)
at oracle.jdevimpl.externaltools.ui.ExternalToolsWizard.pageSelected(ExternalToolsWizard.java:505)
at oracle.jdevimpl.externaltools.ui.ExternalToolsWizard.mav$pageSelected(ExternalToolsWizard.java:59)
at oracle.jdevimpl.externaltools.ui.ExternalToolsWizard$WizardHandler.wizardSelectionChanged(ExternalToolsWizard.java:454)
at oracle.bali.ewt.wizard.BaseWizard.processWizardEvent(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.processEventImpl(Unknown Source)
at oracle.bali.ewt.LWComponent.processEvent(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.selectPage(Unknown Source)
at oracle.bali.ewt.wizard.ReentrantWizard.selectPage(Unknown Source)
at oracle.bali.ewt.wizard.ReentrantWizard$Model.stateChanged(Unknown Source)
at javax.swing.JTabbedPane.fireStateChanged(JTabbedPane.java:290)
at javax.swing.JTabbedPane$ModelListener.stateChanged(JTabbedPane.java:222)

Have tested setting up the external tool in 11g and appears to be okay there. So am only having an issue with the 10.1.3 releases - which is a shame as that is the version we have just moved upto.
Have found with can get the Availability tab to eventually display (by clicking back and forth between other tabs) but the file list is never populated.
Anyone know where it gets the list of possible files from? Can this list have values added/removed from it?

Enhancing standard (single select)search help for Multiple value selection

Hi,
Standard search help for Business Partner (in cProjects) allows only single value selection for input fields. I want to make this multiple selection.
Is there a way to do it.
I used an OVS and built a similar search but its difficult to get the standard options like saving to personal value list etc in it.
It would be good if there is a way to modify the standard search help to allow multiple selection. Any ideas??
Appreciate your help,
Thanks,
Sri
Edited by: Sri on Sep 9, 2010 8:50 PM
Edited by: Sri on Sep 9, 2010 8:52 PM

As far as I know you can't make a standard ABAP dictionary search help return multiple entries - where you get this sort of functionality the searches don't use the standard Elementary search help framework (e.g. organisational structure searches)
Given that the WDA search help relies on these dictionary based searches, I'd think very much that you couldn't enhance it to return multiple. how you could even return multiple entries into a single UI element input field is also confusing to me.
I'd suggest creating a freely programmed value help, it would certainly take quite some effort to recreate those personal value lists etc, but it could be done - I don't like OVS, but that just me.

How to set up multiple log4j configurations for multiple WAR packages?

hi all,
the EAR that i am trying to deploy has multiple WARs.
I need to configure separate loggers for each these WARs.
Could any of experts can help me out.

Hi
Depending on your needs, you may find that Set level offers the best approach:
Within a Set you have the Playbacks (Set Level, so they work for the entire set) with individual patches in the set "live" for the EWI etc as needed.
You need only map one set of controls for all the Playbacks since only 1 set can run at a time.
CCT

BPC Client tool configuration for multiple appset selection

Similar Messages

Maybe you are looking for