Exception thrown in External Tool Configuration for Availability

Within JDeveloper version 10.1.3.4.0.4270 (have also seen the problem in 10.1.3.3), when trying to configure an External Tool the Availability tab on the "Edit External Tool" wizard is not being displayed. This option had previously been configured ok within JDev 10.1.2
From main menu I select: Tools -> External Tools... -> (select any tool) -> Edit...
Tab options for External Program Options, Display, Integration are all selectable and editable, attempting to select tab option "Availability" appears to do nothing but an exception can be seen (when running jdev.exe instead on jdevw.exe) in the following partial stack trace:
java.lang.NullPointerException
at sun.text.UCharacterIterator.<init>(UCharacterIterator.java:46)
at sun.text.UCharacterIterator.getInstance(UCharacterIterator.java:71)
at sun.text.Normalizer.setText(Normalizer.java:1045)
at java.text.CollationElementIterator.setText(CollationElementIterator.java:479)
at java.text.RuleBasedCollator.compare(RuleBasedCollator.java:406)
at oracle.jdevimpl.externaltools.ui.AvailabilityPanel$1.compare(AvailabilityPanel.java:212)
at java.util.Arrays.mergeSort(Arrays.java:1284)
at java.util.Arrays.mergeSort(Arrays.java:1296)
at java.util.Arrays.mergeSort(Arrays.java:1296)
at java.util.Arrays.mergeSort(Arrays.java:1295)
at java.util.Arrays.sort(Arrays.java:1223)
at java.util.Collections.sort(Collections.java:159)
at oracle.jdevimpl.externaltools.ui.AvailabilityPanel.populateAvailableTypes(AvailabilityPanel.java:216)
at oracle.jdevimpl.externaltools.ui.AvailabilityPanel.loadOptions(AvailabilityPanel.java:291)
at oracle.jdevimpl.externaltools.ui.ExternalToolsWizard.pageSelected(ExternalToolsWizard.java:505)
at oracle.jdevimpl.externaltools.ui.ExternalToolsWizard.mav$pageSelected(ExternalToolsWizard.java:59)
at oracle.jdevimpl.externaltools.ui.ExternalToolsWizard$WizardHandler.wizardSelectionChanged(ExternalToolsWizard.java:454)
at oracle.bali.ewt.wizard.BaseWizard.processWizardEvent(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.processEventImpl(Unknown Source)
at oracle.bali.ewt.LWComponent.processEvent(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.selectPage(Unknown Source)
at oracle.bali.ewt.wizard.ReentrantWizard.selectPage(Unknown Source)
at oracle.bali.ewt.wizard.ReentrantWizard$Model.stateChanged(Unknown Source)
at javax.swing.JTabbedPane.fireStateChanged(JTabbedPane.java:290)
at javax.swing.JTabbedPane$ModelListener.stateChanged(JTabbedPane.java:222)

Have tested setting up the external tool in 11g and appears to be okay there. So am only having an issue with the 10.1.3 releases - which is a shame as that is the version we have just moved upto.
Have found with can get the Availability tab to eventually display (by clicking back and forth between other tabs) but the file list is never populated.
Anyone know where it gets the list of possible files from? Can this list have values added/removed from it?

Similar Messages

External Driver Configuration for Process Integration 7.10

Hello colleagues,
I need connection the External Driver Configuration for Process Integration 7.10. Where is the how to?? The PI is 7.10 and bbdd is Oracle.
Regards.

Hello Victor
You will easily find the answer to this by searching the forum. Use the search terms "jdbc driver 7.10".
Please search the forum first before opening a thread. If you don't find the answer then open a new thread.
Regards
Mark

SAP DMS - How to do an external DMS configuration for the existing system ?

Hi All.
Greetings.
Request help and understanding.
Am new to the world of SAP. And request SOME clarity for understanding of DMS.
We are wanting to put an external DMS server and wish to configure for the same.
So that the load on the production SAP R/3 database is reduced.
We are now wanting to test the same on Dev environment.
From SDN Link :
I understand that :
DMS basically has a content server. which stores documents.
That can be accessed through Web, SAP R/3 Gui , SAP Portal.
I have gone thro various links and the following links i have found to be informative and helpful :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
However, would like to know the following because am not getting the clarity :
1) Is there any supported platform / compatibility guide for DMS ?
if yes, can someone send me the link?
2) We have oracle 11g as our for SAP R/3 backend.
Windows 2003 server 64 bit system.
When i check the system status on the dev server of sap.
It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
After much search on the SMP site,
we finally discovered and downloaded the DMS software for unicode and / 64 bit.
Which we saw under the maintenance components separately seen for DMS 7.0
Now for this DMS content server which we would like to make it external for storage of documents -
do we need to have a separate database for this purpose as a repository.
If i run a setup of DMS - will that automatically install any default repository for this or
will it allow me to choose any other repository for the same ?
Can anyone advise on this.
Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
3) I read some thing like this on some of the SDN links :
P40 - Integration of DMS
P62 - R&D Document Manage¬ment and Workflow
P71 - Document management
What are they referring to.
4) We would be accessing these thro web, gui, customised portal.
This content server configuration is a bit confusing.
5) Is SNC configuration required to be done for the separate DMS server setup.
If yes, how to do that ? any configuration link for that please ?
Can anyone advise on the things to do.
Steps to do.
What all are the pre-requisites to check, before we start the set up of DMS.
Can anyone help me understand this whole thing regarding the DMS installation and configuration.
Step-wise.. from the start to end.
Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
Many thanks for your help in advance.
Wishing you a happy and relaxed weekend.
Kind regards
Indu

Thanks christoph & pradeep kumar.
did a few more research and atleast have come to understand that.
DMS server installation has content server which works only with MAXDB.
So my understanding is correct.
And what we see as Easy DMS is a client installation.
which probably i would look at at a later stage.
Found this link to be a little more informative :
http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
I really wish. That life were to be so easy. To call a consultant and finish it off
Wishful thinking
thanks and cheers
indu

External drive configuration for iMovie events

I have a lot of old 8mm & mini dv tapes, that I want to get transferred to external hard drives to edit in iMovie. Once transferred, I plan to back them up and store the backups, then edit and organize. I just upgraded to a new iMac and do not have the firewire 400 port any longer. It seems that the USB connection would be too slow to do iMovie editing on external drives. I would like to use internal drives in a dual or multi dock.
I have several 500G, firewire 400, external hard drives, daisy chained together that I have already I filled. They take up too much space, outlets and cables, so I'm switching to internal drives with a dock.
Someone mentioned that you can get a dock that holds multiple hard drives, which seems might allow faster transfer speeds between them for editing, between the drives. (as well as need less cables/outlets, etc). If I am editing in iMovie, I would think a firewire 800 dock would be preferable versus a USB.
I've seen dual USB 2.0/eSATA (or USB 3.0 docks, which I don't think Apple is supporting right now). Can you use a dual eSATA drive with an iMac (can you use an adapter)?
I also saw some 4 bay towers online, but I don't think that's what I'm after. I'm not sure that I would be swapping them alot. I would like it all together in order to create projects with clips from various years.
So I'm wondering what would be the ideal configuration for iMovie editing on a new iMac? I am thinking a firewire 800 dual dock might be ideal (I am sure 2-2Tb internal drives should be more than enough to hold all my video, until I edit it down). Would that be too sluggish? I guess I could work with 2-1Tb drives and swap them out, if that would be too much.
Any recommendations on a dock? Newegg has a pricey dual IcyDock with FW 800 for $180
http://www.newegg.com/Product/Product.aspx?Item=N82E16817198031&nmmc=OTC-Froogle&cm_mmc=OTC-Froogle-_-ExternalEnclosure-_-ICYDOCK--17198031
or a Thermaltake w/USB & eSASTA for $$44
http://www.newegg.com/Product/Product.aspx?Item=N82E16817153112&cmre=dual_dock-_-17-153-112--Product
PS-is there a site that has suggestions on organizing iPhoto & iMovie libraries?

LOVE this Fantom drive. Very quiet and an amazing price for 1TB with all interfaces.
http://www.macmall.com/macmall/shop/detail.asp?Redir=1&description=FantomDrives%2DG%2DForce+Quad+Interface+1TB+External+eSATA%2FFireWire+800%2FFireWire+4 00%2FUSB+2%2E0+Hard+Drive%2DExternal+HardDrives&dpno=7350333
Or check out this deal for their 2TB version
http://www.macmall.com/macmall/shop/detail.asp?Redir=1&description=FantomDrives%2DG%2DForce+MegaDisk+2TB+External+Triple+Interface+%28Firewire+800%2F400+ %2B+USB+2%2E0%29+Hard+Drive%2DExternal+HardDrives&dpno=7304498

Exception thrown while creating the schema for FOD. please help.

I couldn't run the schema for the FOD demo application. when I follow the steps, I get some exception during the database create part.
From the File menu, choose Open. Open the workspace c:\temp\Infrastructure\infrastructure.jws.
( I edited the build.properties with correct values)
In the MasterBuildScript project, select the build.xml file. In the Structure window, right-click the refreshSchema target and choose Run Target "refreshSchema."
refreshSchema:
[sql] Feb 13, 2008 4:44:54 PM oracle.jdbc.driver.OracleDriver registerMBeans
[sql] SEVERE: Found Oracle Apps MBeanServer but the getMBeanServer method threw an exception.
[sql] java.lang.reflect.InvocationTargetException
[sql]      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[sql]      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[sql]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[sql]      at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
[sql]      at oracle.jdbc.driver.OracleDriver.registerMBeans(OracleDriver.java:274)
[sql]      at oracle.jdbc.driver.OracleDriver$1.run(OracleDriver.java:224)
[sql]      at java.security.AccessController.doPrivileged(Native Method)
[sql]      at oracle.jdbc.driver.OracleDriver.<clinit>(OracleDriver.java:220)
[sql]      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[sql]      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[sql]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[sql]      at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
[sql]      at java.lang.Class.newInstance0(Class.java:350)
[sql]      at java.lang.Class.newInstance(Class.java:303)
[sql]      at org.apache.tools.ant.taskdefs.JDBCTask.getDriver(JDBCTask.java:364)
[sql]      at org.apache.tools.ant.taskdefs.JDBCTask.getConnection(JDBCTask.java:304)
[sql]      at org.apache.tools.ant.taskdefs.SQLExec.execute(SQLExec.java:346)
[sql]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[sql]      at org.apache.tools.ant.Task.perform(Task.java:364)
[sql]      at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:64)
[sql]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[sql]      at org.apache.tools.ant.Task.perform(Task.java:364)
[sql]      at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:378)
[sql]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[sql]      at org.apache.tools.ant.Task.perform(Task.java:364)
[sql]      at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:64)
[sql]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[sql]      at org.apache.tools.ant.Task.perform(Task.java:364)
[sql]      at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:378)
[sql]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[sql]      at org.apache.tools.ant.Task.perform(Task.java:364)
[sql]      at org.apache.tools.ant.Target.execute(Target.java:341)
[sql]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[sql]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[sql]      at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:37)
[sql]      at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[sql]      at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:382)
[sql]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[sql]      at org.apache.tools.ant.Task.perform(Task.java:364)
[sql]      at org.apache.tools.ant.Target.execute(Target.java:341)
[sql]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[sql]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[sql]      at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[sql]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[sql]      at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[sql]      at org.apache.tools.ant.Main.runBuild(Main.java:668)
[sql]      at org.apache.tools.ant.Main.startAnt(Main.java:187)
[sql]      at org.apache.tools.ant.Main.start(Main.java:150)
[sql]      at org.apache.tools.ant.Main.main(Main.java:240)
[sql] Caused by: java.lang.ClassNotFoundException: oracle.as.jmx.framework.standardmbeans.spi.JMXFrameworkProviderImpl
[sql]      at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
[sql]      at java.security.AccessController.doPrivileged(Native Method)
[sql]      at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
[sql]      at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
[sql]      at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
[sql]      at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
[sql]      at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
[sql]      at java.lang.Class.forName0(Native Method)
[sql]      at java.lang.Class.forName(Class.java:242)
[sql]      at oracle.as.jmx.framework.PortableMBeanFactory.init(PortableMBeanFactory.java:1687)
[sql]      at oracle.as.jmx.framework.PortableMBeanFactory.<init>(PortableMBeanFactory.java:156)
[sql]      at oracle.as.jmx.framework.PortableMBeanFactory.<init>(PortableMBeanFactory.java:164)
[sql]      ... 49 more
[sql] Executing file: C:\temp\Infrastructure\DBSchema\Scripts\SQLRunner56601127.sql
[sql] 11 of 11 SQL statements executed successfully
Message was edited by:
user620063

Hi,
please post this to the JDeveloper 11 forum
JDeveloper and OC4J 11g Technology Preview
Frank

BPC Client tool configuration for multiple appset selection

Hi Expert,
is there any way to configure BPC client to select multiple applications simulteniously instead of closing one application to select another application, nothing but multiple BPC sessions at a time like SAP GUI sessions.
thanks
Venkata

Hi,
I guess you are talking about BPC excel. You cant have different sessions in BPC. If you open a report1 from application1 and then if you want to open report2 from application2, you need to change the CV. Once the report2 has been opened in application2, the CV of report1 will still show application1. However, if you want to refresh report1, it will access application2. The CV of the last opened report holds valid for all the previously opened reports.
Having said this, we do have a workaround for the above problem. When you open report1 from application1, go to workbook options and click on "save the active session CV with this workbook". Then you can change your CV to application2 to open report2. And again do the same thing for report2 as well. With this, both the reports will work in their own region. However, you wont be able to change the CV. Even if you do change the CV, the report will not be refreshed based on the new CV. It will still work for the saved CV.
Hope this helps.

The driver is not configured for integrated authentication

my code is :
String connectionUrl = "jdbc:sqlserver://169.254.35.45:1486;" +
"databaseName=ipec;"+"integratedSecurity=true";
Connection con = null;
Statement stmt = null;
try
// Establish the connection to the principal server.
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
System.out.println("driver loaded");
con = DriverManager.getConnection(conne ctionUrl);
System.out.println("Connected to the principal server.");
but this throws an SQL exception that : Driver is not configured for integrated authentication.
I've placed the sqljdbc_auth.dll in
catalina_root/common/lib where the driver jar file is placed....
but its still givin the same error............
replies are welcomed.............
thank you,
shibhs

shibhs wrote:
but this throws an SQL exception that : Driver is not configured for integrated authentication.
I've placed the sqljdbc_auth.dll in
catalina_root/common/lib where the driver jar file is placed....
but its still givin the same error...........I know this is an old message but I have just had the same problem and it seemed to mean that the driver couldn't find the auth dll. When I put in the windows\system32 directory, the integrated authentication worked fine.
Rgrds
Peter
Edited by: P_Tootill on Jul 3, 2008 3:26 AM

External Tool log files

SQL Developer 1.1 Doesn't escape or check external tool titles for characters that cant be used in filenames.
For example, on Windows, define a tool titled SQL*Plus. When you try to start it, you get a message saying that the file log_dir\SQL*Plus_date_and_time can't be created.
I hope I'm not reporting a known issue, but I don't have access to metalink, and didn't see this in the forms already.
WK

Hi Will,
Thanks for the report. This is indeed a previously unreported bug. I have filed it in our bug database as #5725824.
The bug only occurs when you have the "Save Logs to File" option checked on the Environment/Log page in preferences. The workaround is to disable this option, or to change the name of the tool so that it does not contain illegal characters.
Thanks,
Brian

JDeveloper, external tools, same parameters for 2 VO, page layout..

Hi,
JDeveloper Studio Edition Version 11.1.2.3.0. I have a few questions:
1.) External tools can be added to JDeveloper. But how can I add the libraries or components of that tool to the IDE?
2.) In our application there are 2 VO based on a union select that have the same parameters. These VOs are linked.
However, the results must be shown in 2 separate adf tables. I tried to execute, but received, missing IN- OUT-Parameters...
All parameters are set to required and partial triggers are also configured.
3.) I set the document size to a fixed size in pixel. However, the components on the page should not stretch. Which technique
is best for this? Embedding html in adf, i.e. an html table for the base page layout and insert adf inside?
4.) I must also create, i.e. a custom accordion panel (color and icon), menus and submenus. Not skinning. Is this possible in JDev.?
Thanks for your help/feedback!

1) external tools should be self containing. This means they should be applications which can run on their own, like Notepad. What you want to to is to add a library.
2) we need more info. A VO can be based on a union but it doesn't have a connection to an other VO which might be based on the same union. So for me there is some information missing
3) Web applications don't (shouldn't) use fix size. Instead of setting the size on the document you should use a layout container like panelGroupLayout which doesn't stretch its children.
4) Sure, but why?
Timo

Variant configuration u2013 availability check for Configurable material

Hi Guys,
We are doing the variant configuration scenario for one of our client. We are using planning strategy as 25 (sales order with variant configuration).
When we configure the Configurable material at sales order level, we wanted to check the availability check of Configurable for the combination of selected characteristics.
How we can configure it in the system.
Regards,
Shailendra

Hi,
availability check will work as per the checking group you had defined in system.
additionaly you need to put tick in configuration profile for availability check.
checking for material varient is optional, if your bussiness has materail varients you can activate type matching and while configuring the sales order if the values of charactersticks matches system will suggest you the the appropiate varient and you can replace your configurable material in sales order with it.
hope it will help you.
If you need some more information please explain what exactly your are expecting from system during availability check.
Regards
Ritesh
Edited by: R S D on May 28, 2009 7:29 AM

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

Do not worry about it.
Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs

Using $(SolutionName) as argument for External Tools?

Is it possible to use $(SolutionName) as argument for External Tools?
I can't get it to work...
I'm using Visual Studio 2013 Pro (paid for)
// Anders

Hi Anders,
I have take a look at my VS 2013 External Tools, there is no $(SolutionName) option. Only $(SolutionFileName) exists. Do I miss something?
And please also refer to
Arguments for External Tools in MSDN for more detailed information.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there Ready Made Configuration Packs available for Lync Client ( Client on end user computer ) and Server

Hi,
is there Ready Made Configuration Packs available for Lync Client ( Client on end user computer ) and Server ... to check the configuration, services,compliance, functionality of all the features etc at end user level
and server configuration packs
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

No, there is not something available for Lync. What's available can be found here (and it's all not recent):
https://www.microsoft.com/en-us/search/DownloadsDrillInResults.aspx?q=SCCM+%22configuration+pack%22&cateorder=2_5_1&site=
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

GRC table for Configuration settings available

Hi All,
Please help if there is any table in GRC which can show all the Configuration Parameters available along with all possible parameter values of a parameter.
Regards,
Sravan

Hi All,
Thanks for your inputs.
Actually what my doubt was Like AGR_TEXTS will give Role and its description.
We need description of all the Parameters . And also all posible values of the parameters.
As table stated by Simon contain maintained configuation settings(it actually redirects to Maintain configuration settings scren of SPRO) - can we export maintained configuration settings ... I see export option greyed out ..
I am trying to know if we have any table that contains all the parameters available in GRC.
Regards,
Sravan

Exception thrown while regestring for database change notification

hi all,
i have taken sample code from docs for DCN
but im not able to register DCN,its throwing
ORA-29973: Unsupported query or operation during change notification registration
can any one please help me out in this.

I'm not a DBA. So, I don't know all the tools that are available to monitor structural DB changes such as this one. Change Notification's purpose is to monitor user schema data changes, not Oracle system data changes.
I'm guessing that there are DBA tools to monitor trigger code changes, perhaps in OEM. You may want to pose this question on a DB server or OEM discussion forum to see if someone knowledgeable on DB management can answer. It's unlikely there are too many DBA-types monitoring the ODP.NET discussion forum.

Exception thrown in External Tool Configuration for Availability

Similar Messages

Maybe you are looking for