BPC log files very large

Hi All,
our BPC log files are very large compared to the data files. our
we have separate disks for data and log files:
DATA D:\ = 550GB total
LOG E:\ = 278GB total
D:\ICTSI_BPC.mdf = 5.6GB
E:\ICTSI_BPC_log.ldf = 185GB
is this correct? i have read that Log file should roughly be 25% of the
size of the total amount of data. Example: a 4GB database should have a
1GB log file. How can we adjust the size of the SQL log file?
we are using a multiserver set up, SAP BPC 7 SP04 (32bit)
MS SQL 2008 Server (64 bit)
thanks in advance!

Hi Jeb,
Do you already backup the database from the SQL Server ? Because in my server there is once when the log file is bigger then my database and that's because the backup schedule is not working.
So what i do is , do the backup manual from the sql server and the log file will shrink automatic.
After that , i create the automatic backup schedule again.
Hope this information helps.
Suprapto

Similar Messages

Sync Services Log file very large

user>library>application support>sync services>local
My Sync Services log file was over 111 Gb. It appears to grow in size every day. I have reset SyncServices per Apple. http://support.apple.com/kb/TS1627
I even deleted the contents of the local folder (not recommended per apple, but seems fine) and still my syncservices.log grows and is taking over my hard drive.
I use Entourage and Sync Services is used to Sync iCal/Address book (then for my iPhone sync).
Any suggestions to stop this out of control log?!?

Hi,
Increasing the size of the redo logfile size may reduce the number of switches as it takes time to fill the file up but your system's redo generatin will stil be the same. Reduce the frequent commits.
Use the following notes to further narrow down the possible root cause.
WAITEVENT: "log file sync" Reference Note [ID 34592.1]
WAITEVENT: "log file parallel write" Reference Note [ID 34583.1]

LMS 4.0.1 ani log file too large

My LMS 4.0.1 platform is installed since several days and I have a very large ani.log file (> 300 MB after 4 days of daemons running).
In this file, I saw many Ani Discovery errors or warnings like for example:
2011/11/28 11:08:46 Discovery ani WARNING DcrpSMFUDLDDisabledOnPorts: Unable to fetch device details for container(Device,10.11.101.241 hostname: 10.11.101.241)
2011/11/28 11:08:46 Discovery ani WARNING DcrpSMFUDLDDisabledOnPorts: Unable to fetch device details for container(Device,10.74.101.245 hostname: 10.74.101.245)
2011/11/28 11:08:46 Discovery ani ERROR DcrpSMFPortBPDUFilterDisabled: Unable to get span tree device info for the devicecontainer(Device,10.14.101.5 hostname: 10.14.101.5)
2011/11/28 11:08:46 Discovery ani ERROR DcrpSMFPortBPDUFilterDisabled: Unable to get span tree device info for the devicecontainer(Device,10.3.101.12 hostname: 10.3.101.12)
2011/11/28 11:18:45 Discovery ani WARNING DcrpSMFCDPAccessPort: Unable to get CDP information for the devicecontainer(Device,10.1.101.17 hostname: 10.1.101.17)
2011/11/28 11:18:45 Discovery ani WARNING DcrpSMFCDPAccessPort: Unable to get CDP information for the devicecontainer(Device,10.1.101.9 hostname: 10.1.101.9)
2011/11/28 11:18:45 Discovery ani WARNING DcrpSMFSTPBackboneFast: Unable to get span tree device info for the devicecontainer(Device,10.1.101.85 hostname: 10.1.101.85)
2011/11/28 11:18:45 Discovery ani WARNING DcrpSMFSTPBackboneFast: Unable to get span tree device info for the devicecontainer(Device,192.168.12.51 hostname: 192.168.12.51)
2011/11/28 11:25:11 EvalTask-background-41 ani ERROR StpSMFGetStpInstance: unable to get stp device information
These errors are not focused on specific devices (many devices are concerned).
However, all seems to be working fine on the platform (layer2 maps, data collection, inventory, config backup, UT, DFM, ...).
For informations, recently, I was in contact with TAC because Data Collection was always in running state.
They provided a new PortDetailsXml.class file to replace the original one.
It has fixed the problem.
I suspect now that ani database could be corrupted and need to be reinitialized.
I would to be sure of that and if possible to avoid this solution.
Thanks for your help.

Hi ,
Found some errors and exception in the log..
We need to follow the below steps to fix the issue::
-we need to re-initialize the ANIdatabase ::
1.stop the daemon manager :
/etc/init.d/dmgtd stop
net stop crmdmgtd
2.Go to : /opt/CSCOpx/bin/ and issue the command :
Run the below command:    /opt/CSCOpx/bin/perl dbRestoreOrig.pl dsn=ani dmprefix=ANI
windows::
NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
3.Start the Daemon manager ::
/etc/init.d/dmgtd start
net start crmdmgtd
***IMP***   Re-initialize the ANI database will not lose any of the history information of the device. Also ANI database does not contain any historical information as soon as the above steps are complete you need to run and new DATA COLLECTION followed by User tracking Acquisition and then check the issue.
Data collection:: Go to Admin > Collection Settings > Data Collection > Data Collection Schedule   under "start Data Collection" > For "All Device" >> click "START"
User tracking :: Inventory > User Tracking Settings > Acquisition Actions
hope it will help
Thanks-
Afroz
***Ratings Encourages Contributors ****

[SOLVED]Log files getting LARGE

I ran a pacman -Syu for the first time in several months yesterday, and my computer has become almost useless due the fact that everything.log, kernel.log and messages.log gets extremely large (3.8 GB) after a while, causing / to become 100% full.
I've located the following in kernel.log:
Mar 14 15:06:44 elvix attempt to access beyond end of device
Mar 14 15:06:45 elvix attempt to access beyond end of device
Mar 14 15:06:45 elvix sda5: rw=0, want=1812442544, limit=412115382
Mar 14 15:06:45 elvix attempt to access beyond end of device
Mar 14 15:06:45 elvix sda5: rw=0, want=1812442544, limit=412115382
Mar 14 15:06:45 elvix attempt to access beyond end of device
Not sure what it means, but the last two lines are repeated XX times and are the reason why log files grow beyond limits. Anyone got ideas to what can be done to fix this?
Last edited by bistrototal (2008-03-14 16:27:15)

logrotate works really well:
http://www.archlinux.org/packages/14754/
There's quite a few threads about configuration floating around.

BPC Log File

Hi Experts:
I am working in BPC 7.0, we have been having some difficulty getting our Offline Distribution to email. I figured out that issue but it led to another block. I cannot see the entire error message on the screen that tells me the Offline Distribution did not send my email. Does anyone know where I can find the log file that will show me the full error message created by the offline distribution?
Thanks,
Kevin

Hi Kevin,
I'm working with 7.5 so maybe in 7.0 has another name. Look in Documents for a folder named PC_MS, Outlooksoft, BPC or SAP BPC or similar, inside you should find the log file.
To recreate the folder it's sufficient to reinstall the client (unistall and reinstall the BPC client) this should recreate the folder if it's really disappeared.
To restart logging go to web admin console, web admin task and click on manage logging where you can set how fine you want the log.
Other places where to search the error are on the server the same PC_MS\Logging\Log\BPCLOG.#.LOG file or on the DB server Webfolders\<appset>\<application>\PrivatePubblications\<you UserID>\TempFiles the timestamp corresponding tmp file.
Kind regards
Roberto

Sharepoint 2013 - WSS content LOG file very very big

Hi there.
Sharepoint 2013 with latest updates.
WSS CONTENT database size is cca 110GB, LOG FILE is 90GB.
Even if we did FULL backup of databes that does not decrease LOG file size.
Any hints how to lower the size of LOG data file?
With best regards
bostjanc

Hi Bostjan,
I wonder whether the issue can be resolved by shrinking log file.
Shrinking data files recovers space by moving pages of data from the end of the file to unoccupied space closer to the front of the file. When enough free space is created at the end of the file, data pages at end of the file can deallocated and returned
to the file system.
Here is the reference for Shrink a File in SQL 2012 for your convenience:
https://technet.microsoft.com/en-us/library/ms190757(v=sql.110).aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

System.log file are large, and cause a kernel panic when deleting

Hello everyone,
I am trying to solve a dillema. I discovered that over 60GB of my 120GB SSD drive are taken up by system.log files. All 3 are around 20GB. I left my laptop running so none of them are the current one. They are system.log.0, system.log.3 and system.log.4. I have tried several ways to delete them:
Using Disksweeper
At a terminal prompt using sudo rm
At a terminal prompt using sudo su - (to get root access) and then rm -f ....
Rebooting the system in single user mode, mounting the drive and then attempting to delete them
Each time I do, the system reboots with a kernel panic. I have not looked at the panic log yet, but can post that if you need to.
I did look at the end of the current log file to discover there were some issues with programs, and I have fixed it so that these size log files "shouldn't" be generated anymore.
Looking for advice as to how to delete these files! This is driving me nuts. It shouldn't be this hard.
Thanks for any help or insight you can give.

OK, I actually was able to solve this myself. My problem was that ther kernel panic was caused by the journaling. So here is what I had to do:
I temporarily disabled journaling, see here: http://forums.macrumors.com/showthread.php?t=373067
Then I was able to delete the files by starting a terminal session and using sudo rm to delete the files.
Re-enabled journaling (I don't know if it is needed, but it was on before).
Hope this can help someone else in the future.

Flv files very large

I am trying to make some simple tutorials. I use Snapz Pro to record which outputs a .mov file which I convert with CS3 Flash Video Encoder. This typically creates a .flv file that is twice as large as the .mov file. The original recording is set at 10 frames/sec and at 70% of the actual size.
Settings for Flash Vid Encoder are:
Vid Quality: Medium
Vid Codec: On2 VP6
Frame rate: same as source
Audio: 96 kbps (stereo) - (hmmm, don't need stereo, maybe I'll try 64/mono)
I tried a converter, but the quality wasn't good but the file went from 6.5 MB to 2 MB, where
as with Flash Vid Encoder it jumps to 12 MB.
I'm sure you pros do things differently to get your file size down. This is the only time I use
Flash, so I'm quite newbee.
I convert to Flash for cross compatibility with PCs that don't have Quicktime plug.
Thx for any help,
S

because flv files play via progressive download or stream, file size is not critical (unless your server has limited storage). it's the bitrate that's important to users and indicates whether users will see a smooth video or one that stutters.

Log file shrinking

hi every one
i m very happy getting reply from u all
here my doubt regarding log file shrink.in our environment all high avaliabilities are using (log shippimg,mirroring,replication) now my doubt is if i shrink log file of a database which is these H A what will be the reaction?does i ve to reconfigure or
not?
can i make snapshot database for restoring database?
waiting for replies with anxiety
thanks&regards
chetan.tk

Hi chetan.kt,
What is the purpose of shrinking log file? It is recommend that backup the log file frequently as a period of some minutes if the log file is large. In case of more space is required for operation in SQL Server, you may consider to increase the disk space.
Befor shrinking, you should insight into the reason which leads to the log file grows unexpectedly: A transaction log grows unexpectedly or becomes full on a computer that is running SQL
Server.
For log shipping and database mirroring, you can shrink the log file on primary server with non-truncate, and the shrink operation will be log shipped to the secondary servers.
As for replicated database, you cannot be able to shrink the log file if replication is not completed. You may have a try to mark all replicated transactions as completed by stopping log reader agent and restart after shrinking. For more information:
Unable to shrink transaction log on replicated database - SQL 2008
It is not a good idea to shrink the log file. You may have a look at Tibor’s blog about the problem of shrinking log file:
Why you want to be restrictive with shrink of database files
Best Regards,
Stephanie Lv
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Can I modify WLI system Bean's transaction attribute --turn on archiver resulting endless exception in log file

hi,erveryone,
one difficult question need help.
Environment: WLS8.1sp2 + WLI8.1sp2 + ORACLE9i + solaris9
when I started archiver manually,just for a while, wli system generated about 40,000 JMS messages in
wli.internal.worklist.timer.queue,and consume the great mass of system resource of Database server,I had to stop these
archive processes immediately to keep other applicaitons which using the same database running normal. I did so by
following steps:
(1) in WLI console, delete wli.internal.worklist.timer.queue;
(2) in WLI console, reconstruct wli.internal.worklist.timer.queue;
(3) restart wli server.
after server was restarted, wli server output endless and repeatly exception to log file ,the typical exception was:
####<May 8, 2005 3:08:26 PM CST> <Info> <EJB> <app01> <jcwliserver> <ExecuteThread: '54' for queue:
'weblogic.kernel.Default'> <<anonymous>> <BEA1-54B26B551CC1A8856F80> <BEA-010049> <EJB Exception in method: remove:
java.sql.SQLException: Transaction rolled back: Unknown reason.
java.sql.SQLException: Transaction rolled back: Unknown reason
     at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1299)
     at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1250)
     at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
     at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
     at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSPersistenceManager.java:2247)
     at
com.bea.wli.worklist.beans.entity.ListenerBean_1nsp14__WebLogic_CMP_RDBMS.__WL_loadGroup0(ListenerBean_1nsp14__WebLogic_CMP_R
DBMS.java:1055)
     at
com.bea.wli.worklist.beans.entity.ListenerBean_1nsp14__WebLogic_CMP_RDBMS.__WL_setTaskBean_listeners(ListenerBean_1nsp14__Web
Logic_CMP_RDBMS.java:596)
     at
com.bea.wli.worklist.beans.entity.ListenerBean_1nsp14__WebLogic_CMP_RDBMS.__WL_setTaskBean_listeners(ListenerBean_1nsp14__Web
Logic_CMP_RDBMS.java:584)
     at
com.bea.wli.worklist.beans.entity.ListenerBean_1nsp14__WebLogic_CMP_RDBMS.ejbRemove(ListenerBean_1nsp14__WebLogic_CMP_RDBMS.j
ava:2423)
     at weblogic.ejb20.manager.DBManager.remove(DBManager.java:1318)
     at weblogic.ejb20.internal.EntityEJBLocalHome.remove(EntityEJBLocalHome.java:214)
     at
com.bea.wli.worklist.beans.entity.ListenerBean_1nsp14_LocalHomeImpl.remove(ListenerBean_1nsp14_LocalHomeImpl.java:131)
     at
com.bea.wli.worklist.beans.session.RemoteWorklistManagerBean.removeTaskListeners(RemoteWorklistManagerBean.java:3001)
     at
com.bea.wli.worklist.beans.session.RemoteWorklistManagerBean_us8t1c_EOImpl.removeTaskListeners(RemoteWorklistManagerBean_us8t
1c_EOImpl.java:698)
     at com.bea.wli.worklist.timer.WorklistTimerMDB.processListenerToRemove(WorklistTimerMDB.java:102)
     at com.bea.wli.worklist.timer.WorklistTimerMDB.onMessage(WorklistTimerMDB.java:61)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:382)
     at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:316)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
####<May 8, 2005 3:08:26 PM CST> <Info> <EJB> <app01> <jcwliserver> <ExecuteThread: '96' for queue:
'weblogic.kernel.Default'> <<anonymous>> <BEA1-54B96B551CC1A8856F80> <BEA-010049> <EJB Exception in method: remove:
javax.ejb.NoSuchEntityException: [EJB:010140]Bean with primary key: '153.22.52.28-17343c7.10243c3c6ec.a51' not found..
javax.ejb.NoSuchEntityException: [EJB:010140]Bean with primary key: '153.22.52.28-17343c7.10243c3c6ec.a51' not found.
     at
com.bea.wli.worklist.beans.entity.ListenerBean_1nsp14__WebLogic_CMP_RDBMS.__WL_loadGroup0(ListenerBean_1nsp14__WebLogic_CMP_R
DBMS.java:1165)
     at
com.bea.wli.worklist.beans.entity.ListenerBean_1nsp14__WebLogic_CMP_RDBMS.__WL_setTaskBean_listeners(ListenerBean_1nsp14__Web
Logic_CMP_RDBMS.java:596)
     at
com.bea.wli.worklist.beans.entity.ListenerBean_1nsp14__WebLogic_CMP_RDBMS.__WL_setTaskBean_listeners(ListenerBean_1nsp14__Web
Logic_CMP_RDBMS.java:584)
     at
com.bea.wli.worklist.beans.entity.ListenerBean_1nsp14__WebLogic_CMP_RDBMS.ejbRemove(ListenerBean_1nsp14__WebLogic_CMP_RDBMS.j
ava:2423)
     at weblogic.ejb20.manager.DBManager.remove(DBManager.java:1318)
     at weblogic.ejb20.internal.EntityEJBLocalHome.remove(EntityEJBLocalHome.java:214)
     at
com.bea.wli.worklist.beans.entity.ListenerBean_1nsp14_LocalHomeImpl.remove(ListenerBean_1nsp14_LocalHomeImpl.java:131)
     at
com.bea.wli.worklist.beans.session.RemoteWorklistManagerBean.removeTaskListeners(RemoteWorklistManagerBean.java:3001)
     at
com.bea.wli.worklist.beans.session.RemoteWorklistManagerBean_us8t1c_EOImpl.removeTaskListeners(RemoteWorklistManagerBean_us8t
1c_EOImpl.java:698)
     at com.bea.wli.worklist.timer.WorklistTimerMDB.processListenerToRemove(WorklistTimerMDB.java:102)
     at com.bea.wli.worklist.timer.WorklistTimerMDB.onMessage(WorklistTimerMDB.java:61)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:382)
     at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:316)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
The wli server generated log file very quickly ,:it can output 1M bytes log file per second,all logged information
is similar to the <BEA-010049> excetpion metioned above. BEA support engineer suggested me to totally stop the
archive ,I did so,but the server was still ouput the log file like crazy as before and the normal log information are
completely override by <BEA-010049> excetpion.
I checked the EntityEJBs in WLI console :Mywlidomain> Applications> WLI System EJBs> WLI Worklist Persistence$)A#,and
found that in statistics table :
ListenerBean : Pool miss ratio = 99.67%, transaction rollback ration = 99.90%,Destory Bean Ratio = 99.48%(see
attachment)
WorklistTimerMDB: transaction rollback ratio = 99.97%
It seems ListenerBean worked incorrectly.I searched in support.bea.com and found one example which also about server
output endless log file,the author solved this problem by changing Bean's transaction-attribute from 'Required'
to 'RequiresNew' thought he didn't know why it works. I try this method by changing ListenerBean's
transaction-attribute from 'Required' to 'RequiresNew'.
$weblogic_home/integration/lib/wli-ejbs.ear/ejb-jar-generic.xml:
<ejb-name>CommentBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
<container-transaction>
<method>
<ejb-name>ListenerBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>RequiresNew</trans-attribute> -----------the default value is Required,I modified it to
RequiresNew.
</container-transaction>
<container-transaction>
really it works, the log file output resume normal. But there are still some problems:
(1) this exception is still exist:
javax.ejb.NoSuchEntityException: [EJB:010140]Bean with primary key: '153.22.52.28-17343c7.10243c3c6ec.a51' not found.
(2) is this method safe ?(Does "Modify ListenBean's transaction-attribute" impat other parts of wli system?)
(3) after changed the transaction attribute, if turn on archive again, the server output endless exception:
####<Jun 1, 2005 5:14:58 PM CST> <Info> <EJB> <app01> <jcwliserver> <ExecuteThread: '63' for queue:
'weblogic.kernel.Default'> <<anonymous>> <BEA1-2F43890B86B0A8856F80> <BEA-010036> <Exception from ejbStore:
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured in the transaction branch start()
failed on resource 'weblogic.jdbc.jta.DataSource': XAER_RMERR : A resource manager error has occured in the transaction
branch
oracle.jdbc.xa.OracleXAException
     at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1160)
     at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:311)
     at weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:50)
     at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
     at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1075)
     at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1007)
     at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:218)
     at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:419)
     at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
     at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1250)
     at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
     at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
     at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSPersistenceManager.java:2247)
     at
com.bea.wli.worklist.beans.entity.TaskBean_9fxazu__WebLogic_CMP_RDBMS.__WL_store(TaskBean_9fxazu__WebLogic_CMP_RDBMS.java:363
6)
     at
com.bea.wli.worklist.beans.entity.TaskBean_9fxazu__WebLogic_CMP_RDBMS.ejbStore(TaskBean_9fxazu__WebLogic_CMP_RDBMS.java:3548)
     at weblogic.ejb20.manager.DBManager.beforeCompletion(DBManager.java:927)
     at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:745)
     at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1010)
     at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:115)
     at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1142)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:1868)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:250)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:221)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:412)
     at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:316)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured in the transaction branch start()
failed on resource 'weblogic.jdbc.jta.DataSource': XAER_RMERR : A resource manager error has occured in the transaction
branch
oracle.jdbc.xa.OracleXAException
     at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1160)
     at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:311)
     at weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:50)
     at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
     at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1075)
     at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1007)
     at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:218)
     at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:419)
     at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
     at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1250)
     at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
     at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
     at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSPersistenceManager.java:2247)
     at
com.bea.wli.worklist.beans.entity.TaskBean_9fxazu__WebLogic_CMP_RDBMS.__WL_store(TaskBean_9fxazu__WebLogic_CMP_RDBMS.java:363
6)
     at
com.bea.wli.worklist.beans.entity.TaskBean_9fxazu__WebLogic_CMP_RDBMS.ejbStore(TaskBean_9fxazu__WebLogic_CMP_RDBMS.java:3548)
     at weblogic.ejb20.manager.DBManager.beforeCompletion(DBManager.java:927)
     at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:745)
     at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1010)
     at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:115)
     at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1142)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:1868)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:250)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:221)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:412)
     at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:316)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
     at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1292)
     at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1250)
     at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
     at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
     at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getConnection(RDBMSPersistenceManager.java:2247)
     at
com.bea.wli.worklist.beans.entity.TaskBean_9fxazu__WebLogic_CMP_RDBMS.__WL_store(TaskBean_9fxazu__WebLogic_CMP_RDBMS.java:363
6)
     at
com.bea.wli.worklist.beans.entity.TaskBean_9fxazu__WebLogic_CMP_RDBMS.ejbStore(TaskBean_9fxazu__WebLogic_CMP_RDBMS.java:3548)
     at weblogic.ejb20.manager.DBManager.beforeCompletion(DBManager.java:927)
     at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:745)
     at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1010)
     at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:115)
     at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1142)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:1868)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:250)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:221)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:412)
     at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:316)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:281)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2596)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2516)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
How can I solve these problem ? any suggestion is warm welcome.
Thanks in advance.
Great Lou

Back up all data to at least two different storage devices, if you haven't already done so. The backups can be made with Time Machine or with a mirroring tool such as Carbon Copy Cloner. Preferably both.
Boot into Recovery (command-R at startup), launch Disk Utility, and erase the startup volume with the default options.This operation will destroy all data on the volume, so you had be better be sure of your backups. Quit Disk Utility and install OS X. When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For details of how this works, see here:
Using Setup Assistant
Transfer only "Users" and "Settings" – not "Applications" or "Other files." Don't transfer the Guest account, if it was enabled on the old system. Test. If the problem is still there, you have a hardware fault. Take the machine to an Apple Store for diagnosis.
If the problem is resolved, reinstall your third-party software cautiously. Self-contained applications that install into the Applications folder by drag-and-drop or download from the App Store are safe. Anything that comes packaged as an installer or that prompts for an administrator password is suspect, and you must test thoroughly after reinstalling each such item to make sure you haven't restored the problem.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

Log and transfer, my transfered files become very large...

When I use Log and transfer, my files become very large. For instance, The card that I'm transferring from only holds 32G and after I transfer the footage to an external drive it has become around 70G. I checked the codec on transfered files and its showing apple pro res 422 1920 x 1080. Is there an import setting I'm missing? This is all new to me...

This is normal.
Your camera likely shoots AVCHD, a highly compressed version of MPEG 4.
It is so compressed because it uses a "Long GOP" format where only every 15th frame is independent (i frame).
Those in between only contain the differences to the prior i frame and cannot exist without it.
(It's actually somewhat more complicated, but now you know what it is called, you can do more research)
You need the ability to edit on any frame, however. The footage is transcoded to make every frame independent so you can do just that. It takes more space.

Very large bdump file sizes, how to solve?

Hi gurus,
I currently always find my disk space is not enough, after checking, it is the oraclexe/admin/bdump, there's currently 3.2G for it, my database is very small, only holding datas of 10mb.
It didn't happen before, only currently.
I don't know why it happened, I have deleted some old files in that folder, but today I found it is still very large compare to my database.
I am running an apex application with xe, the applcaitions works well, we didn't see anything wrong, but only the bdump file very big.
any tip to solve this? thanks
here comes my alert_xe.log file content:
hu Jun 03 16:15:43 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5600.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:15:48 2010
Restarting dead background process MMON
MMON started with pid=11, OS id=5452
Thu Jun 03 16:15:52 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5452.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:16:16 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5452.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:20:54 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5452.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:21:50 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5452.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:25:56 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5452.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:26:18 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5452.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:30:58 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5452.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:31:19 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5452.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:36:00 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5452.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:36:46 2010
Restarting dead background process MMON
MMON started with pid=11, OS id=1312
Thu Jun 03 16:36:49 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1312.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:37:13 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1312.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:41:51 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1312.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:42:13 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1312.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:46:54 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1312.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:47:17 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1312.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:51:57 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1312.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:52:35 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1312.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:56:58 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1312.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:57:10 2010
Restarting dead background process MMON
MMON started with pid=11, OS id=3428
Thu Jun 03 16:57:13 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3428.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 16:57:52 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3428.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:02:16 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3428.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:02:48 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3428.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:07:18 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3428.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:08:01 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3428.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:12:18 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3428.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:12:41 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3428.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:17:21 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3428.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:17:34 2010
Restarting dead background process MMON
MMON started with pid=11, OS id=5912
Thu Jun 03 17:17:37 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5912.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:18:01 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5912.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:22:37 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5912.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:23:01 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5912.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:27:39 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5912.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:28:02 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5912.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:32:42 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5912.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:33:07 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5912.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:37:45 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_5912.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:38:40 2010
Restarting dead background process MMON
MMON started with pid=11, OS id=1660
Thu Jun 03 17:38:43 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1660.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:39:17 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1660.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:42:54 2010
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=31, OS id=6116
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_01', 'SYSTEM', 'KUPC$C_1_20100603174259', 'KUPC$S_1_20100603174259', 0);
Thu Jun 03 17:43:38 2010
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=32, OS id=2792
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_01', 'SYSTEM', 'KUPC$C_1_20100603174338', 'KUPC$S_1_20100603174338', 0);
Thu Jun 03 17:43:44 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1660.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:44:06 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1660.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:44:47 2010
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=33, OS id=3492
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_01', 'SYSTEM', 'KUPC$C_1_20100603174448', 'KUPC$S_1_20100603174448', 0);
kupprdp: worker process DW01 started with worker id=1, pid=34, OS id=748
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_SCHEMA_01', 'SYSTEM');
Thu Jun 03 17:45:28 2010
Memory Notification: Library Cache Object loaded into SGA
Heap size 5684K exceeds notification threshold (2048K)
KGL object name :SELECT /*+rule*/ SYS_XMLGEN(VALUE(KU$), XMLFORMAT.createFormat2('TABLE_T', '7')), KU$.OBJ_NUM ,KU$.ANC_OBJ.NAME ,KU$.ANC_OBJ.OWNER_NAME ,KU$.ANC_OBJ.TYPE_NAME ,KU$.BASE_OBJ.NAME ,KU$.BASE_OBJ.OWNER_NAME ,KU$.BASE_OBJ.TYPE_NAME ,KU$.SPARE1 ,KU$.XMLSCHEMACOLS ,KU$.SCHEMA_OBJ.NAME ,KU$.SCHEMA_OBJ.NAME ,'TABLE' ,KU$.PROPERTY ,KU$.SCHEMA_OBJ.OWNER_NAME ,KU$.TS_NAME ,KU$.TRIGFLAG FROM SYS.KU$_FHTABLE_VIEW KU$ WHERE NOT (BITAND (KU$.PROPERTY,8192)=8192) AND NOT BITAND(KU$.SCHEMA_OBJ.FLAGS,128)!=0 AND KU$.OBJ_NU
Thu Jun 03 17:45:28 2010
Memory Notification: Library Cache Object loaded into SGA
Heap size 5681K exceeds notification threshold (2048K)
Details in trace file c:\oraclexe\app\oracle\admin\xe\bdump\xe_dw01_748.trc
KGL object name :SELECT /*+rule*/ SYS_XMLGEN(VALUE(KU$), XMLFORMAT.createFormat2('TABLE_T', '7')), KU$.OBJ_NUM ,KU$.ANC_OBJ.NAME ,KU$.ANC_OBJ.OWNER_NAME ,KU$.ANC_OBJ.TYPE_NAME ,KU$.BASE_OBJ.NAME ,KU$.BASE_OBJ.OWNER_NAME ,KU$.BASE_OBJ.TYPE_NAME ,KU$.SPARE1 ,KU$.XMLSCHEMACOLS ,KU$.SCHEMA_OBJ.NAME ,KU$.SCHEMA_OBJ.NAME ,'TABLE' ,KU$.PROPERTY ,KU$.SCHEMA_OBJ.OWNER_NAME ,KU$.TS_NAME ,KU$.TRIGFLAG FROM SYS.KU$_FHTABLE_VIEW KU$ WHERE NOT (BITAND (KU$.PROPERTY,8192)=8192) AND NOT BITAND(KU$.SCHEMA_OBJ.FLAGS,128)!=0 AND KU$.OBJ_NU
Thu Jun 03 17:48:47 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1660.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:49:17 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1660.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:53:49 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1660.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Thu Jun 03 17:54:28 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_1660.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
Fri Jun 04 07:46:55 2010
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 2 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1653M/2047M, Ph+PgF:4706M/4958M, VA:1944M/2047M
Fri Jun 04 07:46:55 2010
Starting ORACLE instance (normal)
Fri Jun 04 07:47:06 2010
LICENSE_MAX_SESSION = 100
LICENSE_SESSIONS_WARNING = 80
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =33
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 200
sessions = 300
license_max_sessions = 100
license_sessions_warning = 80
sga_max_size = 838860800
__shared_pool_size = 260046848
shared_pool_size = 209715200
__large_pool_size = 25165824
__java_pool_size = 4194304
__streams_pool_size = 8388608
spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 734003200
control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 432013312
compatible = 10.2.0.1.0
db_recovery_file_dest = D:\
db_recovery_file_dest_size= 5368709120
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 10
job_queue_processes = 1000
audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 209715200
PMON started with pid=2, OS id=3044
MMAN started with pid=4, OS id=3052
DBW0 started with pid=5, OS id=3196
LGWR started with pid=6, OS id=3200
CKPT started with pid=7, OS id=3204
SMON started with pid=8, OS id=3208
RECO started with pid=9, OS id=3212
CJQ0 started with pid=10, OS id=3216
MMON started with pid=11, OS id=3220
MMNL started with pid=12, OS id=3224
Fri Jun 04 07:47:31 2010
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 10 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
PSP0 started with pid=3, OS id=3048
Fri Jun 04 07:47:41 2010
alter database mount exclusive
Fri Jun 04 07:47:54 2010
Setting recovery target incarnation to 2
Fri Jun 04 07:47:56 2010
Successful mount of redo thread 1, with mount id 2601933156
Fri Jun 04 07:47:56 2010
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Fri Jun 04 07:47:57 2010
alter database open
Fri Jun 04 07:48:00 2010
Beginning crash recovery of 1 threads
Fri Jun 04 07:48:01 2010
Started redo scan
Fri Jun 04 07:48:03 2010
Completed redo scan
16441 redo blocks read, 442 data blocks need recovery
Fri Jun 04 07:48:04 2010
Started redo application at
Thread 1: logseq 1575, block 48102
Fri Jun 04 07:48:05 2010
Recovery of Online Redo Log: Thread 1 Group 1 Seq 1575 Reading mem 0
Mem# 0 errs 0: D:\XE\ONLINELOG\O1_MF_1_4CT6N7TC_.LOG
Fri Jun 04 07:48:07 2010
Completed redo application
Fri Jun 04 07:48:07 2010
Completed crash recovery at
Thread 1: logseq 1575, block 64543, scn 27413940
442 data blocks read, 442 data blocks written, 16441 redo blocks read
Fri Jun 04 07:48:09 2010
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=25, OS id=3288
ARC1 started with pid=26, OS id=3292
Fri Jun 04 07:48:10 2010
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
Thread 1 advanced to log sequence 1576
Thread 1 opened at log sequence 1576
Current log# 3 seq# 1576 mem# 0: D:\XE\ONLINELOG\O1_MF_3_4CT6N1SD_.LOG
Successful open of redo thread 1
Fri Jun 04 07:48:13 2010
ARC0: STARTING ARCH PROCESSES
Fri Jun 04 07:48:13 2010
ARC1: Becoming the 'no FAL' ARCH
Fri Jun 04 07:48:13 2010
ARC1: Becoming the 'no SRL' ARCH
Fri Jun 04 07:48:13 2010
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
Fri Jun 04 07:48:13 2010
SMON: enabling cache recovery
ARC2 started with pid=27, OS id=3580
Fri Jun 04 07:48:17 2010
db_recovery_file_dest_size of 5120 MB is 49.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Jun 04 07:48:31 2010
Successfully onlined Undo Tablespace 1.
Fri Jun 04 07:48:31 2010
SMON: enabling tx recovery
Fri Jun 04 07:48:31 2010
Database Characterset is AL32UTF8
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=28, OS id=2412
Fri Jun 04 07:48:51 2010
Completed: alter database open
Fri Jun 04 07:49:22 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3220.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Fri Jun 04 07:49:32 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3220.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Fri Jun 04 07:49:52 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3220.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Fri Jun 04 07:49:57 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3220.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Fri Jun 04 07:54:10 2010
Shutting down archive processes
Fri Jun 04 07:54:15 2010
ARCH shutting down
ARC2: Archival stopped
Fri Jun 04 07:54:53 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3220.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Fri Jun 04 07:55:08 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3220.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Fri Jun 04 07:56:25 2010
Starting control autobackup
Fri Jun 04 07:56:27 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_488.trc:
Fri Jun 04 07:56:28 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_488.trc:
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\AUTOBACKUP\2009_04_21
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\AUTOBACKUP\2009_04_20
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\AUTOBACKUP\2009_04_17
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\AUTOBACKUP\2009_04_16
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\AUTOBACKUP\2009_04_14
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\AUTOBACKUP\2009_04_12
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\AUTOBACKUP\2009_04_09
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\AUTOBACKUP\2009_04_07
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\AUTOBACKUP\2009_04_06
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\AUTOBACKUP\2009_04_03
ORA-27093: 无法删除目录
Fri Jun 04 07:56:29 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_488.trc:
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\BACKUPSET\2009_04_21
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\BACKUPSET\2009_04_20
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\BACKUPSET\2009_04_17
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\BACKUPSET\2009_04_16
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\BACKUPSET\2009_04_14
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\BACKUPSET\2009_04_12
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\BACKUPSET\2009_04_09
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\BACKUPSET\2009_04_07
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\BACKUPSET\2009_04_06
ORA-27093: 无法删除目录
ORA-17624: 无法删除目录 D:\XE\BACKUPSET\2009_04_03
ORA-27093: 无法删除目录
Control autobackup written to DISK device
handle 'D:\XE\AUTOBACKUP\2010_06_04\O1_MF_S_720777385_60JJ9BNZ_.BKP'
Fri Jun 04 07:56:38 2010
Thread 1 advanced to log sequence 1577
Current log# 1 seq# 1577 mem# 0: D:\XE\ONLINELOG\O1_MF_1_4CT6N7TC_.LOG
Fri Jun 04 07:56:56 2010
Thread 1 cannot allocate new log, sequence 1578
Checkpoint not complete
Current log# 1 seq# 1577 mem# 0: D:\XE\ONLINELOG\O1_MF_1_4CT6N7TC_.LOG
Thread 1 advanced to log sequence 1578
Current log# 3 seq# 1578 mem# 0: D:\XE\ONLINELOG\O1_MF_3_4CT6N1SD_.LOG
Fri Jun 04 07:57:04 2010
Memory Notification: Library Cache Object loaded into SGA
Heap size 2208K exceeds notification threshold (2048K)
KGL object name :XDB.XDbD/PLZ01TcHgNAgAIIegtw==
Fri Jun 04 07:59:54 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3220.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Fri Jun 04 07:59:58 2010
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_3220.trc:
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []

Hi Gurus,
there's a error ora-00600 in the big trc files as below, this is only part of this file, this file is more than 45mb in size:
xe_mmon_4424.trc
Dump file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mmon_4424.trc
Fri Jun 04 17:03:22 2010
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Windows XP Version V5.1 Service Pack 3
CPU : 2 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:992M/2047M, Ph+PgF:3422M/4958M, VA:1011M/2047M
Instance name: xe
Redo thread mounted by this instance: 1
Oracle process number: 11
Windows thread id: 4424, image: ORACLE.EXE (MMON)
*** SERVICE NAME:(SYS$BACKGROUND) 2010-06-04 17:03:22.265
*** SESSION ID:(284.23) 2010-06-04 17:03:22.265
*** 2010-06-04 17:03:22.265
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [kjhn_post_ha_alert0-862], [], [], [], [], [], [], []
Current SQL statement for this session:
BEGIN :success := dbms_ha_alerts_prvt.check_ha_resources; END;
----- PL/SQL Call Stack -----
object line object
handle number name
41982E80 418 package body SYS.DBMS_HA_ALERTS_PRVT
41982E80 552 package body SYS.DBMS_HA_ALERTS_PRVT
41982E80 305 package body SYS.DBMS_HA_ALERTS_PRVT
419501A0 1 anonymous block
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedst+38           CALLrel ksedst1+0 0 1
ksedmp+898          CALLrel ksedst+0 0
ksfdmp+14           CALLrel ksedmp+0 3
_kgerinv+140         CALLreg 00000000             8EF0A38 3
kgeasnmierr+19      CALLrel kgerinv+0 8EF0A38 6610020 3672F70 0
6538808
kjhnpost_ha_alert CALLrel _kgeasnmierr+0       8EF0A38 6610020 3672F70 0
0+2909
__PGOSF57__kjhn_pos CALLrel kjhnpost_ha_alert 88 B21C4D0 B21C4D8 B21C4E0
t_ha_alert_plsql+43 0+0 B21C4E8 B21C4F0 B21C4F8
8 B21C500 B21C50C 0 FFFFFFFF 0
0 0 6
_spefcmpa+415        CALLreg 00000000
spefmccallstd+147   CALLrel spefcmpa+0 65395B8 16 B21C5AC 653906C 0
pextproc+58         CALLrel spefmccallstd+0 6539874 6539760 6539628
65395B8 0
__PGOSF302__peftrus CALLrel _pextproc+0
ted+115
_psdexsp+192         CALLreg 00000000             6539874
_rpiswu2+426         CALLreg 00000000             6539510
psdextp+567         CALLrel rpiswu2+0 41543288 0 65394F0 2 6539528
0 65394D0 0 2CD9E68 0 6539510
0
_pefccal+452         CALLreg 00000000
pefcal+174          CALLrel pefccal+0 6539874
pevmFCAL+128 CALLrel _pefcal+0
pfrinstrFCAL+55 CALLrel pevmFCAL+0 AF74F48 3DFB92B8
pfrrunno_tool+56 CALL??? 00000000 AF74F48 3DFBB728 AF74F84
pfrrun+781          CALLrel pfrrun_no_tool+0 AF74F48 3DFBB28C AF74F84
plsqlrun+738 CALLrel _pfrrun+0            AF74F48
peicnt+247          CALLrel plsql_run+0 AF74F48 1 0
kkxexe+413          CALLrel peicnt+0
opiexe+5529         CALLrel kkxexe+0 AF7737C
kpoal8+2165         CALLrel opiexe+0 49 3 653A4FC
_opiodr+1099         CALLreg 00000000             5E 0 653CBAC
kpoodr+483          CALLrel opiodr+0
_xupirtrc+1434       CALLreg 00000000             67384BC 5E 653CBAC 0 653CCBC
upirtrc+61          CALLrel xupirtrc+0 67384BC 5E 653CBAC 653CCBC
653D990 60FEF8B8 653E194
6736CD8 1 0 0
kpurcsc+100         CALLrel upirtrc+0 67384BC 5E 653CBAC 653CCBC
653D990 60FEF8B8 653E194
6736CD8 1 0 0
kpuexecv8+2815      CALLrel kpurcsc+0
kpuexec+2106        CALLrel kpuexecv8+0 673AE10 6736C4C 6736CD8 0 0
653EDE8
OCIStmtExecute+29   CALLrel kpuexec+0 673AE10 6736C4C 673AEC4 1 0 0
0 0 0
kjhnmmon_action+5 CALLrel _OCIStmtExecute+0    673AE10 6736C4C 673AEC4 1 0 0
26 0 0
kjhncheck_ha_reso CALLrel kjhnmmon_action+0 653EFCC 3E
urces+140
kebmronce_dispatc CALL??? 00000000
her+630
kebmronce_execute CALLrel kebmronce_dispatc
+12 her+0
_ksbcti+788          CALLreg 00000000             0 0
ksbabs+659          CALLrel ksbcti+0
kebmmmon_main+386 CALLrel _ksbabs+0            3C5DCB8
_ksbrdp+747          CALLreg 00000000             3C5DCB8
opirip+674          CALLrel ksbrdp+0
opidrv+857          CALLrel opirip+0 32 4 653FEBC
sou2o+45            CALLrel opidrv+0 32 4 653FEBC
opimaireal+227 CALLrel _sou2o+0             653FEB0 32 4 653FEBC
opimai+92           CALLrel opimai_real+0 3 653FEE8
BackgroundThreadSt CALLrel opimai+0
art@4+422
7C80B726 CALLreg 00000000
--------------------- Binary Stack Dump ---------------------
========== FRAME [1] (_ksedst+38 -> _ksedst1+0) ==========
Dump of memory from 0x065386DC to 0x065386EC
65386D0 065386EC [..S.]
65386E0 0040467B 00000000 00000001 [{F@.........]
========== FRAME [2] (_ksedmp+898 -> _ksedst+0) ==========
Dump of memory from 0x065386EC to 0x065387AC
65386E0 065387AC [..S.]
65386F0 00403073 00000000 53532E49 20464658 [[email protected] ]
6538700 54204D41 0000525A 00000000 08EF0EC0 [AM TZR..........]
6538710 6072D95A 08EF0EC5 03672F70 00000017 [Z.r`....p/g.....]
6538720 00000000 00000000 00000000 00000000 [................]
Repeat 1 times
6538740 00000000 00000000 00000000 00000017 [................]
6538750 08EF0B3C 08EF0B34 03672F70 08F017F0 [<...4...p/g.....]
6538760 603AA0D3 065387A8 00000001 00000000 [..:`..S.........]
6538770 00000000 00000000 00000001 00000000 [................]
6538780 00000000 08EF0A38 06610020 031E1D20 [....8... .a. ...]
6538790 00000000 065386F8 08EF0A38 06538D38 [......S.8...8.S.]
65387A0 0265187C 031C8860 FFFFFFFF [|.e.`.......]
========== FRAME [3] (_ksfdmp+14 -> _ksedmp+0) ==========
and the file is keeping increasing, though I have deleted a lot of this, but:
as I marked:
time size
15:23 pm 795mb
16:55 pm 959mb
17:01 pm 970mb
17:19 pm 990mb
Any solution for that?
Thanks!!

How to clean large system log files?

I believe that OS X saves a lot of system data in log files that become very large.
I would like to clear old history logs.
How may I view and clean system log files?

Thank you Niel.
I have obtained the list at /private/var/log.
There are a lot of files in there.
Since I am not familiar with functions of these files should I be concerned that by simply deleting all of the files in folder /private/var/log will not cause any problems? Would this action present some unintended consequences?

Buffered TDMS file still very large

Hello, I am trying to to stream to a TDMS file. I am writing approximately 10 channels of data at 20 Hz. I was creating a new file evey 5 mins or so and defragging the file once I was finished with it, which was giving me a reasonable size of file. I decided that I would like to make bigger files (over the period of hours) and the the defragging would be too computationally costly to do on the fly. I have been trying to set a buffer for the TDMS files but the resultant files are very large. You can tell the file isn't being writen until its closed (from watching its size in windows explorer) which suggests the file is being buffered. However its about 6 times bigger than an ASCII file of the same data, with and index almost as big again.
Does anyone have any ideas why it would appear to buffer but not actually reduce the data size. I'm running Windows XP, LabVIEW 10.0.
When I create each new file I run this to set the buffers. (I have also hard wired in a buffersize of 100000 on a one minute file to no avail.
Niall
Thanks
Niall

I has this marked as the solution but it turns out it only helped one of my programs. I am still getting very large (fragmented) TDMS and index files for another program. The problem is that if I just defrag the (supposedly buffered) file, it interupts the data logging because it takes so long. I'm 99% sure that it *is* buffereing as it doesn't write till it closes the file, and if I use the read properties function it reads back a set buffer size. Here is the VI that actually writes the data. There bit at the top is for writing an optional acii file so you can ignore that.
Its maybe a bit hard to see whats going on in the next one, but this is where the file is created before being passed to the setbuffer VI which I posted earlier. It also closes that last file
Its really hacking me off now and holding me up from going no to other stuff. It would be great if someone had some ideas.
Thanks
Niall

Larger redo log file members or more log groups

Oracle 11gR1 RHEL5 64 bit
Hi,
I was wondering what is better from a perfomance tuning perspective. I have log swiches occuring every 2 minutes in our production database. I know definitely that our log file members are too small (100MB). The redo log sizing tool in OEM told me to make it 40G according to the fast_start_mttr_target setting which is set to 600. Now, my question is what is better to do?
1. Increase the size of my current redo log members? Right now there are 4 groups with 2 members in each.
OR
2. Should I create additonal redo log groups (4 more) and then re-rerun the sizing tool or query the v$instance_recovery view?
Which is better? tradeoffs?
Thanks all.

If you want to reduce the number (frequency) of Log Switches, you should increase the size of the Online Redo Logs -- ie create new Log File Groups of a larger size and drop the older ones.
If the issue is "checkpoint not complete" waits, then either
a. Increasing the size of the Log Files
or
b. Increasing the number of Log Files
is doable
Note that if you increase the number but not the size, you still have a checkpoint every N Mbytes -- ie, possibly too frequently !
On the other hand if you increase your size to be very large, at every switch, the Archiver is going to kick in with a large Read + large Write operation -- reading that Redo Log of N GBytes and writing it out to the archive log target location, imposing that additional I/O spike on your system. (Writing to filesystem will go through the FileSystem Buffers so if your database SGA isn't very large and your database performance relies on hitting the FileSystem Buffer Cache to avoid Disk Reads, that performance will be impacted as a large portion of the FileSystem Buffer Cache will be taken over by the Archiver for some time).
Hemant K Chitale
http://hemantoracledba.blogspot.com

BPC log files very large

Similar Messages

Maybe you are looking for