BPE_adapter The process does not support the given synchronous interface
We are using PI 7.0 Sp 14 .
Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
Our scenario is Extern system send SOAP call to PI - BPM_SYNC_ASYnc_process --> BPM Proxy_send
this BPM proxy_send to ECC R/eceiver at R/3
We are getting the following error after migraiton. Please help
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Call Adapter
-->
Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
Thanks
Similar Messages
-
The Organizer does not support the color space in the file
I just purchased and installed PSE 8 as an upgrade to PSE 6. My catalog correctly shows all of my existing images. However, when I try to import photos into the Organizer, I get a message that nothing was imported. The reason given is that "The Organizer does not support the color space in the file." This happens with photos taken on my iPhone as well as those from my Canon PowerShot A1100 IS. Any suggestions?
Here is my system information:
Elements Organizer 8.0.0.0
Core Version: 8.0 (20090905.r.605812)
Language Version: 8.0 (20090905.r.605812)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:/Documents and Settings/All Users/Application Data/Adobe/Elements Organizer/Catalogs/My Catalog
Catalog Size: 83.9MB
Catalog Cache Size: 459.8MB
System:
Operating System Name: XP
Operating System Version: 5.1 Service Pack 3
System Architecture: AMD CPU Family:15 Model:11 Stepping:1 with MMX, SSE Integer, SSE FP
Built-in Memory: 2GB
Free Memory: 829MB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.65
Adobe Reader Version: 9.2
Adobe Acrobat Version: Not installed
CD and DVD drives:
J: (SONY DVD BUS: 3 ID: 3 Firmware: RW)It turns out that this problem went away after the program crashed. Everything seems to be working well now.
-
Im running WSUS on Windows 2012 R2. Installed over "Add Roles and Features". Configured, synchronisation works, but can not download any updates.
System
Provider
Name]
Windows Server Update
Services
EventID
364
Qualifiers]
0
Level
2
Task
2
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-08-27T06:43:36.000000000Z
EventRecordID
390
Channel
Application
Computer
wsus-server.murrcz.local
Security
EventData
Content file download
failed. Reason: The server does not support the necessary HTTP protocol.
Background Intelligent Transfer Service (BITS) requires that the server support
the Range protocol header. Source File:
/msdownload/update/software/crup/2011/03/windows6.1-kb2506014-x64_8c22199a738b51dbfe78262ca21ba98cf8bdeca2.cab
Destination File:
C:\WSUS-updates\WsusContent\A2\8C22199A738B51DBFE78262CA21BA98CF8BDECA2.cab
The online help not works:
Content download has failed. BITS service is not starting or is stopping during downloads.
Open a command window.
Type sc config bits start= auto
Type net stop bits && net start bits
Type net stop wsusservice && net start wsusservice
Start WSUS 3.0: Click Start, click Administrative Tools, then click
Microsoft Windows Server Update Services v3.0.
Click Synchronization Results.
In the Action pane, click Synchronize Now.
Verify
Look for the corresponding error event.
Open a command window.
Type cd <WSUSInstallDir>\Tools
Type wsusutil checkhealth
Type eventvwr
Review the Application log for the most recent events from source Windows Server Update Services and event id 10030.
The KB922330 not aplicable, ExecuteSQL.exe not present.
Please help.
Thanks.\SQLCMD.EXE -S \\.\pipe\MICROSOFT##WID\tsql\query -d "SUSDB" -Q "update tbConfigurationC set BitDownloadPriorityForegroud=1"
This should be considered a temporary fix. It will saturate your Internet connection during periods of WSUS downloads in this configuration.
The correct and permanent fix should be to resolve the failure of your perimeter device to properly support the HTTP v1.1 protocol specification (which is now some 14 years old).
Either your device is misconfigured, or it needs a firmware update to support the full specification.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Yesterday 20 november I have made some purchases in Ittunestore. The download went well. Till the synch of itunes with ipod. Some of the downloaded music did noch synchronize. The message was: the ipod does not support the file format (mp4). Strange, right? All the rest of downloaded music items has been synchronised without any problems. What may be the problem?
For music files purchased via the iTunes Store, Apple has used the following file extensions -
.m4a unprotected AAC format music files
.m4p protected AAC format music files
.m4b protected Audio Books
.m4r unprotected ringtones in AAC format
As you can see Apple have never used .mp4 for music files via the iTunes Store.
For videos Apple use .m4v and these are in H.264 format.
You could try changing the file extension to .m4a, first then see if it plays on your computer and then try re-synching it. -
The server does not support the requested critical extension (0x8007202c)
Hello guys,
The sympton is the same as the one in "The
server does not support the requested critical extension." Exception.
I got the error in calling IDirectorySearch::GetNextRow. As I observe, the error is trigger when retrieving the another page of records. The LDAP path to connect is "GC://<FQDN_of_GC>". The search filter is (&(|(objectClass=group)(objectClass=msExchDynamicDistributionList))(mailnickname=*)).
There are about 100 thousands of group objects in the forest. So the answer in that thread does not help.
Any thoughts?
Thanks.
[email protected]Hi Michael,
Thanks for your remind of the server is Windows 2008 R2.
After deep research on this topic, there were a couple of possible causes. One was based on asking AD to do sorting on the results of the query. Our calls to AD do not do any sorting at all. The other I came to was a couple of pages that may help alleviate
the problem of groups in large AD environments. It has to deal with the temporary table size that Active Directory uses, with the tunable parameter MaxTempTableSize.
The articles as below are for your reference:
http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/95bfb95f-4e43-4dd8-ac3a-0c89d2cf528e
http://support.microsoft.com/kb/315071
http://msdn.microsoft.com/en-us/library/ms677927(VS.85).aspx
Besides, if the above is not the cause of our issue, there may be something wrong in the C# code. Since I just an AD engineer and not familiar with the C# code, I suggest you should involve one C# code engineer to work with us about this issue. After doing
many research, please add the class of the object when searching. For example, “DirectorySearcher ds = new DirectorySearcher(de, filter,class)”. I’m not sure if it’s correct, just a suggestion.
Hope to hear good news from you soon. Happy X'MAS day!
Best regards,
Bryan -
Script error (the object does not support the property or method of loaded0)
I am getting a script error each time I "run" my site from Dreamweaver (F12). It says something like:
"The object does not support the property or method of loaded0, code0, url https://apis.google.com" etc etc "Do you want to keep running the script?"
(I just get it in a different language, so sorry for the translation). What have I done wrong here?I am using internet explore, with yahoo as my "startpage"
These two have different urls, the last one is the one I got today when I didn't have Dreamweaver open. I rarely use google. -
The network does not support the requested encryption method
Prior to last night, I had connected to several wireless networks without issue, so I know my computer can do it. The issue started after I reinstalled the operating system. I connected to my friends wireless network last night with no problems, using the password. My system was having other unrelated problems so I decided to reinstall the operating system since the computer had just had a new hard drive put in anyway. Then when I tried to get online after everything was up and running, I couldn't.
Wireless networks show up fine, but when I go to log in, enter the password and hit connect, after a second I get the error message : "The network "name" does not support the requested encryption method". I've scoured the help topics, searched high and low, and tried everything. Please help
Message was edited by: Eden51086After you reinstalled the OS, you may need to download install any Airport Updates as well.
-
Process does not follow the routing ends up in complete status
Installed Adobe LiveCycle server ES 2.5 with SQL Server 2008 as database
And followed the tutorial ‘Create Your First LiveCycle Application’
Deployed it on the server when I test the same
i.e. when the workspace user fills in form details and hits complete button it ends up as status complete
And not assigned to next user in the route
The process does not follow the routing it ends up in complete status
And nothing shows up when trying to record and play back the process
Tried invoking Via workbench too
no errors in the server log
Could this be an installation issue any pointers appreciated
Please adviseIssue with Jboss as it was taking longtime time to start due to low CPU ideally it should not take more than 3 to 5 minutes
Process works now -
'organizer does not support the colorspace in the file' PSE 9
Does anyone know how to fix th eproblem of PSE 9 Organizer not importing a jpeg picture because 'The organizer does not support the colorspace in the file', short of a reboot?
And no the obvious 'fix the colorspace' is not the solution. This has happened to me twice in quick succession. First it was one of a batch of photos all taken at the same time, with the same camera, with the same settings. I missed checking the first of the batch when downloading them to PSE, then when I came back to this photo after downloading the rest of the batch I got the colorspace error.
The second time it happened was when I deleted a file from the catalog (but not the hard drive) and tried to import the smae file (that was previously in the catalog0 and all of a sudden the colorspace is not good enough for PSE.
Actually when this happens PSE is not prepared to recognize the colorspace of any picture file (well ok, gif, png, jpg and psd) and a reboot is required.Please open one such file in PSE9 Editor? Does it open fine. Do a save as if it does.
Another solution could be opening this file in IrfanView which is freely downloadable. Did you happen to edit these files in between? Sometimes, file headers get corrupt due to edits and hence Organizer or Editor refuses to open them. From my observation on this forum, opening the file in IrfanView once and doing a save operation there fixes the problem most of the times.
Thanks
Andaleeb -
Just changed my router to airport extreme
My MacBook pro and iPad work fine but my VAIO wireless desk computer is not working.
It says
, the router does not support the network .check security setting.
Which of the security setting will I change?
Thanks for your help.John, thanks for the email so quickly.
I too hope I haven't tried "everything" either but I am reasonably technical. I had done what you suggested to do before but I did both again.
Ethernet is yellow in the left side bar. In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both. I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail. I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
Thoughts??? -
Why the iPod does not support Thai language
Why the iPod does not support the Thai language? iTunes supports it. If I drag a song with ID3 tags into my iPod the title becomes blank. If I remove the ID3 tags the title displays but the enconding of the characters are inccorect.
Why the iPod does not support the Thai language?
The languages supported by the iPod are listed in detail in its tech specs:
http://www.apple.com/ipod/specs.html
Hopefully future versions will expand the list to included Arabic, Hebrew, Thai, Vietnamese, Hindi, etc. -
Best way to announce that the hardware does not meet the minimum requirements
Hi Everybody!!!
I'm in the process of tiding my App up, and I stumbled into a requirement that needs to be addressed. I'm not quite familiar with the latest trends, so I was wondering if anybody could recommend a way to inform the user if the hardware
to use does not meet the minumum requirements.
In a nutshell:
* I just created a game using Direct3D / DirectX 11,
* I'm using "DrawIndexedInstanced", which means that the videocard to use should meet at least DirectX v10 (my shaders are using model 9_3 but I tested it in a computer with DirectX9 model 3 (or so the nvidia brochure said), and the game pretty
much died in my arms).
* According to the App Certification Requirements: "if you choose a minimum feature level higher than 9_1, your app must detect at launch whether or not the current hardware meets the minimum requirements. If not, the app must display a message to
the customer detailing the Direct3D requirements."
* I know how to detect the Direct3D level supported by the current videocard. What I would like to know is how to tell the user that the videocard does not support the minimum requirements.
I don't have much knowledge about the current trends:
* I assume that displaying a message box may not be the best option, as that would mean I need to link the MFC layer to do so (the game is in Visual C++ and that's what I would do if it were one of my day-job projects). I'm quite sure that
is too much of a library just to show a message box... not to mention that most likelly the MFC is no longer supported in a Metro application...
* I was thinking about displaying a nice graphic warning about the issue, but if the D3DDevice1 is not what I expect then I don't think I can be sure that at least it can display the graphic with the information.
* I'm not quite sure if I should be linking to a .NET Library ("System.Windows.Forms" comes to mind), but then again maybe it's too much of a library for just a messagebox.
* Then again, displaying that message in a command prompt may not be the best idea either.
Any help is greatly appreciated!!!
Best Regards,
Tarh Ik
Tarh ikHi Chuck,
I tried your idea, but the game always crashed when calling the DrawIndexedInstanced() function in a computer that only supported DirectX Level 9.1 (plenty of those computers at my day-job, sometimes I swear this office could be
a museum). The crash started as a driver unload call, and after that everything goes down.
I also tried using the WARP mode, but the performance was horrible, and after a minute of playing I started to have temperature issues with the CPU (I did not see that one coming)
What I finished doing was to create two sets of shaders (pixel and vertex):
* If the feature reported by D3D11CreateDevice was 9_3 or above, I'd use my very own and happy shaders, compiled in 9_3 model. Beautiful performance with DrawIndexedInstanced().
* If on the other hand the feature reported by D3D11CreateDevice was either 9_2 or 9_1, I'd use a set of shaders compiled for level 9_1. That seemed to be enough to draw a couple of images on the screen and tell the user, using my own game elements,
that the computer did not match the hardware requirements.
It looks like this was a good approach. My game passed the certification test, and it is currently on the AppStore.
Best Regards,
Tarh Ik
PS: This posting has been posted "AS IS"
Tarh ik -
As of Monday 4/20, I've encountered a significant problem with Silverlight on my Vista PC.
Several weeks ago I read a brief item stating that Google would be dropping support for npapi and that it would affect Silverlight sometime in April. One of my key daily apps uses Silverlight, but I didn't receive notification from that software's author
about the pending change and how it would be handled. Successfully used the app every week (Mon-Fri) this month for 8-10 hrs/dy day (as I've been doing for the past ~5+ years: past year under Chrome, year before that under FireFox, ~3 prior years
under IE) and on Fri 4/17 shut it down for the weekend. When I booted up on Mon morning and tried to log into the key app however, it prompted me to download and install Silverlight, acting as though I never had it installed!
I recalled the earlier warning about Google dropping support, so I closed Chrome, started up FireFox, but got the same prompt from the app -- it directed me to install Silverlight. I downloaded it (had no choice as to which version, just got the "Silverlight_x64.exe"
file) and got part-way through the install when this error msg popped up: "Unable to Install Silverlight. Your operating system does not support the 64-bit version of Silverlight". WHAT?! Clicking on the "more info"
link led to this msg: "Message ID: 1518. Your operating system does not support the 64-bit version of Silverlight. Click here for the latest version of Silverlight." That link simply led back to the download page which resulted
in receiving another copy of the same executable file.
According to my system ( > Control Panel > System ), I'm running "Windows Vista Home Premium", with a "System Type: 64-bit Operating System". I've been using this same Vista PC since Sep 2008 and running Silverlight for
around the past 5 yrs.
? -- Why doe the Silverlight installer code flag my OS as not supported?
? -- Is there a way to get an older version of Silverlight that will run under Vista?
Thanks in advance for any helpful comments.Andy -- Thanks for the link, but I'm not adventurous enough to download from a non-MSFT site.
Besides, since I didn't make any changes to my hardware/software config, I expect a MSFT rep to explain why their two programs suddenly stopped working together and then provide whatever code fix is needed. A phone call to their tech support (predictably)
led to nowhere but a recommendation to purchase one of the company's support offerings (which I declined to pursue). The Silverlight development team appears to participate in these forums, so I'd hope one or more of them offers a realistic solution.
Here's something I forgot to mention in my original post: In several of the threads on this subject (some dating back to 2008!), people have
suggested running IE as the browser vs FireFox or Chrome; however, that idea fails to note that the error msg (Message ID:1518) clearly states that "your operating
system does not support the 64-bit version of Silverlight"; it doesn't say anything about
what browser you're using. -
Apple TV 3 does not support the Microsoft Wedge Mobile Bluetooth Keyboard
Apple TV (3. Generation) still (17.02.2013) does not support the Microsoft Wedge Mobiloe Keyboard. I bought it especially for use with Apple TV but it doesn't work. Apple TV finds the keyboard with the exact name but can not connect. No 4 digit code appears that you can type in to your keyboard to compelete the connecting process and after a few seconds "connections fails" appears.
Now i dont't know if i should send it back to amazon to get back my money or keep it and wait until it maybe will work some day... I red from articles from beginning of january 2013 that a new Version of Apple TV is in the Pipeline (3.2) and that it has an other bluetooth chip. The same as in the iphone 5 that works with the MS wedge keyboard. So i really don't know if i should wait for the next few updates of my Apple TV or wait for a new Apple TV hardware- Update... Telephone calls with apple and microsoft doesn't brought useful results. Restore function of Apple TV doesn't work.
I hate that Apple always brew their own soup... Bluetooth is know for an easy connection to ALL devices but Apple TV supports only a hand full of keyboards. **** S**t!!!!!!!!!!!! -.-Hi
This is the solution from Microsoft website. Work fine (don´t forget press and hold Fn key!!):
Connecting the Wedge Mobile Keyboard to a tablet PC
By default, the Bluetooth Wedge Mobile Keyboard pairs with most tablet PCs through secure simple pairing (SSP) with a passkey. Some tablets, however, may not support SSP well with a passkey.
In order to successfully pair your Wedge Mobile Keyboard to such a tablet, use the following alternative pairing mode.
Pair your keyboard through SSP without a passkey
Press and hold the Fn key at the same time as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on the top of the keyboard will blink green and red alternately. This means that your keyboard is discoverable to your tablet within 6 minutes.
On your tablet PC, from the Start menu, select Control Panel, and in Category view, locate Hardware and Sound.
Select Add a device.
When the keyboard is listed, select it, and follow the instructions to successfully pair your Wedge Keyboard with your tablet.
Note
If you want to pair your keyboard with a tablet or other computer that supports SSP with a passkey, press and hold the Connect button only. -
I am unable to sync my iPhone4S iCal to my Mac iCal. Snow Leopard is my OS and it does not support the cloud. What do I do?
To makeuse of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
Maybe you are looking for
-
Portal Run time error after deploying custom logon page par file in portal
Hi Experts, We have customized the standard portal logon par file for client XYZ and imported it with the same name (com.sap.portal.runtime.logon.par) in portal. It is working fine for XYZ . And another client ABC wants the same customization
-
I understand that unlimited means everything inclusive, but I was wondering about this part, does the unlimited means that if I forward calls to a mobile phone will it be free? meaning is it included in the unlimited pack?
-
Is there a bug with firefox when supporting "aria-labelledby" attribute for span element?
I use firefox 10.0.3, and using JAWS 13 to read the screen. I set the "aria-labelledby" attribute for the span, and only first element content was read even I set three 'id' for this attribute. This can work well under IE8. <pre><table role="grid" su
-
Adobe Shadow now available from Labs
Hi Everyone One or two of you may know about the new app called Adobe Shadow but for those who do not: - Inspect and preview web workflows on iOS and Android devices Adobe® Shadow is a new inspection and preview tool that allows front-end web develop
-
Activating 'change documents' for notification item class 015
Dear Experts, Kindly help me in activating 'change documents' for notification item class 015. Thanks and Regards, R N Sabat