BPM and Mobile Integration

Hello,
I want to know if it is possible to access a task from a blackberry. I tried it but I could not, is there a way for doing this?
Thanks & Regards
SU

Hi SU,
This isn't possible in the current release. BPM-Mobile integration is indeed a hot topic
regards,
Harsha

Similar Messages

Diff between BPM and weblogic integration

hi,
can anybody tell me what is the difference between aqualogic BPM and weblogic integration.
both do business process modelling.
and can anybody tell me when to use one . a usecase example would be helpful.
thanks

hi,
can anybody tell me what is the difference between aqualogic BPM and weblogic integration.
both do business process modelling.
and can anybody tell me when to use one . a usecase example would be helpful.
thanks

BPM and UCM Integration

I want to save some flexField value of a BPM human task into a custom field created in UCM doc store, for that i am following the following steps
1) Created a custom field in UCM document store
2) Created a flex field in BPM work Space
3) Added pay load in human task from the "*data*" tab of human task flow
4) Mapped Pay load with the flex field of BPM Work Space
5) Now when I want to map the pay load attribute by adding a custom attribute in the "documents" tab of the human task, IDE is not allowing to add any custom fields except the pre populated values.
In this situation if I want one of my human task payload attribute to be saved in the custom field created in the document store how to do it. According to the Oracles guide we can add a new attribute through the "**document**" tab of the human task flow but it is not happening.

OK, so you are using the attachment option from BPM.
I gave you few hints in my previous post, but I will explain them in more details:
a) BPM has its own metadata
Forget for your document for a moment - the BPM process instance still can have its own metadata. These are used when you create BPM screen flows.
I think you will need to create a BPM parameter to store your custom value first. (and this is really purely a BPM question)
b) A document can be attached to a BPM process instance
In a sense, such a document is nothing, but an additional information for the BPM process instance. This has nothing to do with document-oriented workflow (quite often, the attached document enters no workflow at all); it is the BPM process instance that routes across the organization, not the document.
c) BPM metadata <--> UCM metadata
AFAIK, there is no integration between BPM and UCM concerning metadata. You may check-in (attach) a new document using UCM profiles, but for your process this value is not visible - unless you call a service to retrieve it/update it. If you implemented a) (created your custom value in BPM), you may call UCM's services to update this value - at the minimum when you are leaving from the BPM workflow step.

Regarding BPM and UCM integration

we are unable to add a custom attribute in documents tab in Human Task Flow, where we want to pass a custom value to be stored in UCM for retrieval of the document
How can we add a custom attribute in HumanTaskFlow, which has to be stored in UCM doc store.
but i am successfully uploadingdocument into UCM with out metadata attributes
Thanks Regadrs
rajendar

OK, so you are using the attachment option from BPM.
I gave you few hints in my previous post, but I will explain them in more details:
a) BPM has its own metadata
Forget for your document for a moment - the BPM process instance still can have its own metadata. These are used when you create BPM screen flows.
I think you will need to create a BPM parameter to store your custom value first. (and this is really purely a BPM question)
b) A document can be attached to a BPM process instance
In a sense, such a document is nothing, but an additional information for the BPM process instance. This has nothing to do with document-oriented workflow (quite often, the attached document enters no workflow at all); it is the BPM process instance that routes across the organization, not the document.
c) BPM metadata <--> UCM metadata
AFAIK, there is no integration between BPM and UCM concerning metadata. You may check-in (attach) a new document using UCM profiles, but for your process this value is not visible - unless you call a service to retrieve it/update it. If you implemented a) (created your custom value in BPM), you may call UCM's services to update this value - at the minimum when you are leaving from the BPM workflow step.

BPM and ADF integration - some questions

Hi,
I have a few questions about comunication between BPM 11.1.1.5 and Human Task based Task Flow:
1) What is the best way to pass data (task id, proces id, proces data) from BPM workspace to Human Task Task Flow (and get them as TF params).
2) Where can I find a description, how ADF app comunicates with BPM process.
3) Where can I find a description of all data controls created by JDeveloper (BPM Suite) when HT Task Flow is created.
3) Where can I find a description (and their functionality) of managed beans created by JDeveloper (BPM Suite) when HT Task Flow is created.
Kuba

Hi,
Sory, but I'm still not sure, how ADF comunicates with BPM (I know that it uses EJB services and hwtaskflow.xml). But a still don't have an answers for follwowing questions:
1) I know ADF quite good. Having method in data controls (in our case getTaskDetails()) we need to invoke it somehow. I don't see anywher invokation of this method.
2) In generated task flow there is some managed beans and params - what is role of them ? Having over 50 task flows , do I need it in all of them. Where can I find description of those beans and params
3) In our approach we use BPM , ADF RC for UI and Business Components to persist data into database. Only data from payload we need is ID of master-level row. My question is - do I have to generate data controls for all human task ?. In my my opinion it should be only one communication point between BPM and ADF but not the same for all pair human task --> task flow.
All infomation I need from BPM is:
- task ID
- task flow name (to open apriopriate tab in my application)
- available outcomes
- to know is BPM operation is enabled
Kuba

BPM and Mobility

Hello,
I want to know if it's possible now to have integration to mobile devices from BPM Task and UWL. I've asked this question before but SAP told me that it was going to be possible in 7.3.
Obviously, what I meant with integration, is integration without a lot of programming task through the BPM API.
Someone knows any update of this topic?
Thanks & Regards
SU

Hi,
you are right. In 7.30, the recommended way to provide a mobile access to BPM is via its API. There is already quite some nice information available on SDN to showacse this:
NetWeaver BPM RESTful Service and jQuery Mobile
Of course, it is also an option (or even the prefered way) to use SUP as a middleware in between.
Best regards,
Stefan

Need a solution for integration BPM and UCM 11.1.1.4?

Hi all,
Currently, I am using BPM & SOA 11.1.1.4.
Could somebody advise me a solution for integration BPM and UCM ?
I heard somebody said that need to wait to BPM 11G patch set 5 (11.1.1.6) version, which have basic BPM and UCM integration and haven't to using external API like RIDC or CIS.
Thanks & Regards.
Ming Nguyen.

Do not use prebuilt binaries, but compile the package from source with the current libudev.
sha256sums=(SKIP)
source=("$pkgname::git+https://github.com/rogerwang/node-webkit.git#tag=nw-v$pkgver")
to build it in the PKGBUILD, use nw-gyp i guess.
Last edited by progandy (2013-06-21 22:54:36)

Integration between Oracle BPM and Oracle UCM

Hi
I have a requirement how to integarte between Oracle BPM and Oracle UCM.
Detailsabout the problem:
Once user start the process and want to upload the document in the same process, the document should be uploaded into UCM and similarly user wants to update some document in the middle of the process , user can check-out the document and check-in the document (Docuemnt present on Oracle UCM).
Please guide me what is the approach for that ?
Thanks for your help in advance.

Check this, u can get some info
Re: What is a recommended approach to integrate Oracle BPM 10R3 and Oracle UCM

Integrating SAP BPM and existing workflows, does an interface exist?

Hallo all
I have to evaluate how to build a set of BPM Workflows which shold incorporate "exits" into existing workflows (basically combining BPM and Business Workflows). Do you know if there is a referenc on how such a thing could be acomplished or have some advices for a smart way of organising the interface between the two workflow engines?
Regards,
Minima

Hi Minima,
You may want to post this in the [BPM|SAP Business Process Management; forum.
Cheers,
Ramki Maley.

Regarding Future WLI Products, BPM and diiference with Aqualogic

Regarding Integration and BPM products from BEA I have the following queries:
1) What is the next major release for Weblogic Integration product and what Enhancements will be there?
2) Which BEA product is going to have Business Process Management (BPM) functionality supporting BPEL Server and BPEL designers?
3) How BEA differentiates the BEA AquaLogic from BEA Weblogic Integration?
regards,
neeraj
?:|

I found some more information here:
Workflow in SAP NetWeaver
I still look forward to more insight as to when to choose BPM and workflow!

Collect Operation using BPM and

Hi Experts,
I have a scenario where Proxy to file communication happens.
1.i have to collect all the data in XI that has sent from proxy ( Sender System ) via BPM and send to file system only after every 15 mins.
2. For the same scenarion without using BPM.
i have to append ( in the file construction Mode ) the data in the file for 15 mins only.ould you
Kindly help me with these two questions with step by step procedure. Thanks in advance.
Regards,
Ruban.S

Hi,
In ESR you could go to SAP BASIS -> SAP BASIS 7.xx -> Integration Processes -> BpmPatternCollectTime. It contains the pattern/steps that you would need.
Not sure if there is a good way of doing this without bpm.
Regards,
Mark

RFC to BPM and backward. error SYNCHONOUS_MESSAGE

Hi everybody!
Help me pls!
I am learning BPM and want to make easy synchronous example.
RFC sends the request to BPM and recieves the response.
My RFC is named Z_TEST_CALL_WEBSERVICE.
I have created:
in Design
mi_rfc_request - abstract asynch interface (message = Z_TEST_CALL_WEBSERVICE)
mi_rfc_response - abstract asynch interface (message = Z_TEST_CALL_WEBSERVICE.Response)
mi_string_abstract - abstract synch interface (output message = Z_TEST_CALL_WEBSERVICE, input message = Z_TEST_CALL_WEBSERVICE.Response)
Test002_MyScenario_001 - integration process, that have:
Receive0 - Receive step (name = Receive0, message = rfc_request, mode = Opens S/A Bridge, asynch interface = mi_string_abstract)
Send0 - Send step (name = send0, mode = Closes S/A Bridge, message = rfc_response, Opened by = Receive0)
rfc_request - comtainer element (category = abstract interface, type = mi_rfc_request)
rfc_response - comtainer element (category = abstract interface, type = mi_rfc_response)
in Configuration
have imported my Inegration Process and have named him "mybpm"
receiver determination (Z_TEST_CALL_WEBSERVICE -> mybpm)
interface determination (Z_TEST_CALL_WEBSERVICE -> mybpm, inbound interface = mt_string_abstract)
sender agreement (defined Communication Channel)
When i call my RFC from R/3
CALL FUNCTION 'Z_TEST_CALL_WEBSERVICE'
destination dest
EXPORTING
    var           = '1'
IMPORTING
   RET           = tab
   answer        = answer
EXCEPTIONS
         system_failure        = 2 MESSAGE msg_text1
         communication_failure = 1 MESSAGE msg_text
         other = 4.
i get error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1/>
<SAP:P2/>
<SAP:P3/>
<SAP:P4/>
<SAP:AdditionalText/>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack>Der Prozess unterstützt das gegebene synchrone Interface nicht oder unterstützt keine synchronen Nachrichten Возникла особая ситуация CX_WAPI_DEF_PROPERTY_NOT_FOUND (программа: SAPMHTTP, include , строка: 0)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I tried translate from German ...
"Process doesn't support this synchronous interface or doesn't support any synchronous message."
what do i wrong?

The issue has been resolved. The integration process needed to be activated in sxi_cache. Once it was activated, the interface ran successfully.
But ...
When i start the process, i get TimeOut. Object rfs_response in Send0 don't had instance.
I added transform (rfc_request -> rfc_response) and get 'success'.

BPM and Flat File

Hi to all.
I'm a new entry in Netweaver BPM technology.
I need to send via BPM a file from a sender system to a target one.
The file has to be delivered as-is without mapping.
In ESR I prepared all service interfaces, outbound, inbound and abstract and in configuration integration builder I customized the receiver determination and interface determination using the correct service interfaces.
In interface determination vs the target I specified just the inbound service interface, according with the SEND step in BPM and not an operation mapping that doesn't exist.
The problem is that the Process Engine stops the queue assigned to the process with the error "Permanent error in BPE inbound processing".
I don't know if these info are enough to understand the problem or not.
I will be grateful to anyone help me to address the problem and the solution.
Thanks in advance and Ciao.
Nicola

Hi Nicola,
Looks like you have issue with the interface or syntax issues , but anyways please post the question in PI forums for more expert answers.
This forum is only for Netweaver BPM which is different from PI.
Regards, Anil

BPM and SOA

Hi all,
I would like know your feeling about BPM and SOA.
Are BPM and SOA on top one of the other from a stack point of view ?
Or BPM and SOA are the two sides of the same coin ?
In your opinion is BPM that deliver service orientation or service-orientation comes from something called SOA ?
Thanks in advance for your feedbacks.

Hello Pierluigi,
Business Process Management (BPM) is a term used basically for two things:
1. A way to run, monitor and improve your business execution (the Business part)
2. The name of specific tooling to support the above (the IT part)
There are non-techical aspects of BPM: there can be procudure changes, organization changes, role changes, product changes to achieve the goal of business improvement, which have nothing to do with IT. These are results of strategic, tactical or operational planning. Business process management is just a term for controlling and improving your processes: facilitated by anything which helps. (In BPM projects therefore some things might be better solved NOT trying to get everything automated.)
Where automation can help this, the IT part gets involved.
The IT part of BPM is where processes are modelled, controlled, monitored and changed through tooling. And tooling to run processes like workflow engines or process engines. Any form of process automation can be ranked under BPM. BPM as and IT concept than means that the processes are controlled and monitored by a separate component of your IT archtecture. This component in NOT actually performing system updates or transactions, it is merely administers the process-meta data of the execution, and orchestrates the events and actions which have to be performed to succesfully execute the process.
Where SOA gets involved is when you apply the open web services standard to design your running components in your BPM solution. Web services to utilize and support the process, web services to help the user interaction, web services to support the business transaction, and web services to actually update the systems. So SOA is just a way of implementing and supporting a BPM solution. On enterprise level it is wise to take the SOA route because interoperability is key to make things work, and changes/additions/integrations can be made far more easily when using the open web services definition rather than proprietary implementations.
The SOA design concept can also be used in non-BPM scenarios. When defining re-usable services which accomodate just simple transactions or look-up functions where no specific workflow is involved (PO Box lookup, search functions, etc.), web services can be a great way of providing an open interface to business logic.
Summarizing: BPM and SOA are two completely separate concepts and can be implemented without each other. However, when applied on enterprise level, the SOA design pattern will help you achieve the business agility goals you might have with your BPM implementation.
I hope this helps making things clear.
Regards, Edo van de Velde

Help deciding between BPM and Business Workflow

Hi All,
We are in the phase of deciding which tool to use for SAP Application systems from Workflow and Business Rules Engine Point of view.
We recommended SAP Business Workflow + BRF+ for that.
But SAP Business Workflow is not having monitoring UI as good as SAP BPM.
So we are planning to propose the solution using SAP BPM instead of SAP Workflow.
Our main requirement is HR Org structure data fetching and it is achievable with SAP BPM what I have studied so far.
My question to the experts is whether SAP BPM can be integrated with SAP BRF+?
Thanks in advance
Message was edited by: Gareth Ryan - please don't use Urgent in your posts and try to use meaningful titles.

Check out the following article, which provides a good overview of both solutions and gives guidance when to use what:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0bf9a3a-c607-2f10-3f82-cdeff15b7ce4?QuickLink=index&…
The biggest difference (besides the underlying technology stack) is that by modeling processes in BPMN, business users gain transparency and become more involved in BPM projects, leading to better results.
btw, SAP BPM is in the market for 5 years now and has more than one thousand productive customers.

BPM and Mobile Integration

Similar Messages

Maybe you are looking for