Collect Operation using BPM and

Hi Experts,
I have a scenario where Proxy to file communication happens.
1.i have to collect all the data in XI that has sent from proxy ( Sender System ) via BPM and send to file system only after every 15 mins.
2. For the same scenarion without using BPM.
i have to append ( in the file construction Mode ) the data in the file for 15 mins only.ould you
Kindly help me with these two questions with step by step procedure. Thanks in advance.
Regards,
Ruban.S

Hi,
In ESR you could go to SAP BASIS -> SAP BASIS 7.xx -> Integration Processes -> BpmPatternCollectTime. It contains the pattern/steps that you would need.
Not sure if there is a good way of doing this without bpm.
Regards,
Mark

Similar Messages

Sharepoint 2013 copy/move operation using Content and Structure fails

Hi,
We had a recent upgrade from SP2010 to SP2013 environment. After the migration, we realized that the
copy/move operations using Manage content and structure(sitemanager.aspx) is not working as expected, neither does this give any error nor is it stuck. In fact if I check the content and structure log I find the message as
succeeded but file/item is not copied to the target.
The strange thing is that if I am performing this operation with Full Control permission level it
does not work but if I do the operation as Site collection admin it works without problem. I know if sub-sites are to moved then one should be site col admin but in this case I am trying to move just documents or pages.
Any help will be greatly appreciated.
Thanks

Hi Vineet,
According to your description, my understanding is that copy/move operation using Content and Structure cannot work in SharePoint.
I recommend to check if there are any custom fields in the source list/library and target list/library. If yes, delete the custom fields to see if the issue still occurs.
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/en-US/56d803d7-8573-4c29-9f6b-c63023941f44/manage-content-and-structure-cannot-move-or-copy-items?forum=sharepointgeneralprevious
To copy or move files/items between sites, we need to have
appropriate permissions on both sites.
I recommend to check if the user has full control on both sites.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Asynchronous, but need Ack without using BPM and IDocs.

Hi Experts,
                 I would like to do a scenario i.e., "Asynchronous communication, but need Acknowledgement without using BPM and also without using IDocs whether it is sender side or receiver side". Please help me.
Thanks in advance
Srihari.

Without using BPM will be little longer process. But the alternative way is to add one more receiver in the receiver determination and send some file to that location with the actual mapping getting executed for the actual receiver. and in the second interface you can get the file created at second receiver back to the source location. But this will be little long as compared to synchronous scenarios.
Flow:
Source
          Receiver 1--> Actual mapping as per requirement
          Receiver 2(For Ack)--> Create a mapping with blank file sent to Receiver
Receiver 2-->File Adapter--> Source through 2nd mapping/interface and keep the File adapter pooling interval around 5 sec or less so that you can get the file back to source location.
Regards
Anand

Collect Messages using BPM

Hi all,
        Am doing a collect message pattern using BPM. After collecting messages wen mapping is called its throwing exception. CAn you help me out in this. I ll explain.
the input i give is :
<Root>
       <Name> asd </name>
       <ID> A </ID>
</Root>
i sent thid message 5 times to BPM (using collect pattern).
the stop message is of the format
<Stop>
   <ID> A</ID>
</Stop>
wen i send this the collect block is exited and the flow comes to a transformation step which does a n:1 mapping
ie. in my mapping i add the source message type and changed its occurence to unbounded in messages Similarly in IM also i changed the occurence of source MI to unbounded. wen i test the message mapping with this
<Root>
       <Name> asd </name>
       <ID> A </ID>
</Root>
as input it gives the exception. But if i gve like this ten its showing successful.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
<Root>
       <Name> asd </name>
       <ID> A </ID>
</Root>
</ns0:Message1>
</ns0:Messages>
But how can wedo that as transforamtion happens in BPM. PLease help me out in this

Hi,
Check these links
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/5d373f5e550456e10000000a114084/frameset.htm
Regards,
Kumar

How to collect records using BPM

Hi All,
i have a req that i need to collect records in chunks and want collect using BPM want make their single file.
i have 10 fields in one table for that i have made one datatype ,i want to collect 1lac recods 5 times in BPM and want make a single file and send it to one file.
please suggest what are the steps are req in BPM to do this.

Hi Gangadhar,
Check this links
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm (for one interface)
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm (for multiple interfaces)
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
Regards
Ramesh

How is validation done using BPM and MDM

Hi everybody.
I have a business usecase. It is with BPM-MDM Integration. I need your comments on this.
Data is transferred/imported from ERP to MDM. This process is automized and data is imported through Import Server.
whenever the import happens, validation has to be happened like null check, format etc. Based on that the record has to be imported or it can ignore it.
Should these validation needs to be done at MDM end or at BPM?
If MDM End, should I need to use MDM Workflow as well or Is it be possible without using MDM workflow.
How can I check the non-imported data(ie. Records which failed during validation)
can I get this information from MDM level by any means, saying can we get the records which failed during validation
Is there anything which we can do from MDM side or should we do this check from BPM side?
Also Is it recommended to go with MDM Workflow and BPM as well in this usecase. (like BPM-MDMWorklfow-MDM).
Any suggestions.
Regards
Bala

Hi Bala,
As per your requirement, you can go ahead with MDM workflow. This MDM workflow will trigger on Record Import.
See, I assume that you understand the different steps of MDM workflow, like Assign, Validate, Branch, Start, Stop etc.
As your workfow will trigger on Record Import with Start step (Checkout state) and record will check-in only if it validates that validation else will get rollback.
can I get this information from MDM level by any means, saying can we get the records which failed during validation
Before Roll back you can syndicate that records also for your reference.
Start(Checkout)>Branch step(checks validation like null case and other MDM fields population etc)>If fails( Send these records to)>syndicate step>Stop1 (Rollback) else if Pass -->Stop2(checkIn)
In this way only records which are valid records gets checkin ( gets created into MDM) and failed validation records would be syndicated out of MDM for your reference before Stop step (Roll back) means not get created into MDM.
I dont have MS-Visio to test this scenario but i hope it should work..
Regards,
Mandeep Saini

Set operations using Rotobrush and Masks question

Hi everyone
I have a relatively simple video clip of an object rotating. Its shot straight on, no fancy moves or anything just rotating. I've rotobrushed it and it looks good on a plain white background. I'm animating a color shift such that as the object rotates its top 1/3rd part changes colors. The area changing colors has crinkly edges but I've used rotobrush to isolate that as well, no problems there. I duplicated the original clip, rotobrushed the duplicate to separate it from the background. The original clip fades into pure white leaving the rotobrushed layer visible. I duplicated the original again, rotobrushed the top 1/3rd in the same way. I created a new layer with just a color adjustment effect and used the rotobrushed top 1/3rd as a track-mask for the animated color adjustment layer.
What I want to do is run a color gradient that shifts colors same as the top part but bleeds into the lower part that does not change colors.
So, is it possible to use a regular mask for the gradient and do a difference operation with the rotobrush of the object so the gradient only effects the area below the top 1/3rd which changes color ? I know I can do it with regular masks, but I can't figure out how to do it with rotobrush masks. I want to be able to do intersections and unions.
any pointers would be greatly appreciated. Thanks
-AK

Wrong thinking. You need to get away from masks vs. Rotobrush. In the end, all you do is create matte channels and therein lies the answer - any channel can be mangled with effects, possibly requiring to be extracted and isolated first by pre-rendering or pre-comping. RB and masks are just means to an end/ tools, nothing more.
Mylenium

Doc on Async and Sync using BPM

Hi all
Can anyone send some docs explaining the steps involved in bridging async and sync interface using BPM. The source adapter is JDBC and target is proxy. I've already checked one blog by krishna moorthy (File-File using BPM) and based on that i tried but coudnt get the expected result for my scenario.
Thkx

Hi PS,
in your Integration Repository go to:
Software Component: SAP BASIS
Namespace: http://sap.com/xi/XI/System/Patterns
Process: BpmPatternSyncAsyncBridge
This is a very good example!
Regards Mario

Using BPM

Hi Friends,
I Am new to XI . i would like to know when to use BPM , and what is the difference between BPM and Normal scenarios.
Also can u guys give me a sample scenario where BPM is used.
What are the advantages or disadvantages of using BPM.
Thanks,
Nilakantan.S

when to use BPM
1.Control/Monitor the messages in XI
2. Collect/Merge the messages in XI
3. Split the messages in XI
4. To Multicast an Message
5. Send an Alert
for sample scenarios
refer
Walkthrough with BPM
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/integrationProcess%28ccBPM%29inXI&
What are the advantages or disadvantages of using BPM.
Business Process Management (BPM) has become a critical part of enterprise development.business process management
Business process management (BPM) is a systematic approach to improving an organization's business processes. BPM activities seek to make business processes more effective, more efficient, and more capable of adapting to an ever-changing environment. BPM is a subset of infrastructure management, the administrative area of concern dealing with maintenance and optimization of an organization's equipment and core operations.
A business process is a set of coordinated tasks and activities, conducted by both people and equipment, that will lead to accomplishing a specific organizational goal. The Business Process Management Initiative (BPMI), a non-profit organization, exists to promote the standardization of common business processes, as a means of furthering e-business and business-to-business (B2B) development. To this end, the organization has developed the Business Process Modeling Language (BPML), an Extensible Markup Language (XML)-based metalanguage for modeling business processes.
BPM(Business Process Management) is a structured approach that models an enterprise's human and machine tasks and the interactions between them as processes. BPM software uses a dashboard interface that offers a high-level view of the operation that typically crosses departmental boundaries. The dashboard integrates with all the applications that perform processes as well as related databases and can be used to trigger the start of a unit of work.
Evolving from document management, workflow and enterprise application integration (EAI), a BPM system can monitor and analyze tasks in realtime and set off alerts when specified limits are exceeded or a response is not received within a specified time.
Management for People/Machine Systems
For decades, systems that are entirely automated have more or less taken care of themselves. However, operations requiring a mix of people and machine procedures employ BPM as a higher-level management system that keeps track of them both.
Over time, a BPM system can provide historical data of human-machine interactions that might be extremely difficult to obtain from information systems, especially disparate systems from several departments or systems running on different platforms.
The BPM Suite (BPMS)
A BPM system may comprise a variety of independent packages or a comprehensive business process management suite (BPMS), which includes tools for modeling and analysis, application integration, business rules support, business intelligence (BI), activity monitoring and optimization. Advanced BPMSs provide a development tool for creating forms-based applications, which are often the start of many business processes.
The following r excellent websites on BPM giving the need for BPM :
An introduction to Business Process Management
http://www.avelon.nl/downloads/Introduction_BPM.pdf
business process management
http://whatis.techtarget.com/definition/0,,sid9_gci1088464_tax304528,00.html
BUSINESS PROCESS MANAGEMENT WITH SAP NetWeaveru2122
http://www.sap.com/platform/netweaver/pdf/BWP_NetWeaver_BPM.pdf
Business Process Management Essentials
http://www.glintech.com/downloads/BPM%20Essentials%20with%20Open%20Source.pdf
Business Process Management
http://www.seeburger.es/fileadmin/es/pdf/SEEBURGER_-_Business_Integration_Server__TA000714BPM_.pdf
BPM Process Patterns Repeatable Designs for BPM Process Models
http://edocs.bea.com/albsi/docs55/pdfs/BPM%20Process%20Patterns%20White%20Paper.pdf
Business Process Management -Modeling to Execution
http://www30.sap.com/korea/company/events/techday05/img/data_06.pdf
BUSINESS PROCESS MANAGEMENT (BPM)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ed49db90-0201-0010-c4a5-c520866a19c7
BPM Process Patterns:Repeatable Design for BPM Process Models
http://www.bptrends.com/publicationfiles/05%2D06%2DWP%2DBPMProcessPatterns%2DAtwood1%2Epdf
Patterns: SOA Foundation - Business Process Management Scenario
http://www.redbooks.ibm.com/redbooks/pdfs/sg247234.pdf
A BPM Roadmap
Clubhouse Las Vegas- A BPM Roadmap
Edited by: malini balasubramaniam on Sep 22, 2008 7:27 AM

File to File using BPM & value mapping

Hi,
   I have the following scenario to do. sample file structure is given below.
source:
HDR   13052008INDIA
BDY   123456
BDY   1234567
EOF
Target:
HDR 2IN BDY 123456 EOF
HDR 2IN BDY 1234567 EOF
for the above mentioned source and target mapping. we have to use BPM and value mapping.
In the HDR row 13052008 is the date value this has to be passed to RFC function module and it will return 2, this value has to be mapped to target
And INDIA has to be mapped to IN using the value mapping option. similarly we have many coutry code.
could anyone let me know the step by step procedure to achieve this, I followed the blog https://weblogs.sdn.sap.com/pub/wlg/1926. [original link is broken] [original link is broken] [original link is broken] but it does not fit to my scenario.
help is appreciated.
Regards
RDS

Hey,
     This is a normal file to file scenario.
     You need to use RFC look up instead of value mapping.(as you need to extract 2 and IN from an RFC)
There is no need for a BPM.
refer to this blog(for RFC look up)
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
this will solve your problem.
Output of RFC look up will be 2 and IN . So use the concat function.
Other values map them directly from source to target.
Also, set the occurence for the target structure as 0 to unbounded in the mapping.(this is to be done in order to have one file for each record of the source)
You also need to configure file content conversion.(both at sender and reciever side) to convert the text file to XML on the sender side and then XML to text at the reciever side.
refer to this link for FCC.
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
This is for sender file content conversion.
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
This is for reciever FCC.
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
reward points if useful.
regards,
       Milan

File to RFC using BPM

hey guys
i m doin a synchronous File to RFC scenario using BPM and getting a 'NO receiver found error' in MONI,i checked my File as well as RFC adapter in RWB,the sender File adapter is green,RFC adpater is also green and the receiver file adapter is green but says 'no message processing until now'
i m takin help from the followin blog
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
the error in MONI is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I checked SM58 as well but it does not have any error XML messages.
and idea where shuld i check?
i check my mappin by using payload from MONI,mapping is working fine
thanx
ahmad
Message was edited by:
Ahmad ansari

Hi Ahmad,
In which step is the error occurring?
Have you checked your BMP status using SXMB_MONI_BPE?
PS: Usefull link: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c">How To Monitor Integration Process (ccBPM)</a>
Regards,
Sergio

IDoc to HTTP using BPM

Hi,
My Requirement is IDoc(Async)HTTP(sync)-IDoc(Async) using BPM
and there is a condition if i will not get response from HTTP then i need to send error message to ECC(IDoc).
could you please provide me details steps in IR and ID.
Thanks
Girii

HI,
please go through below blog instead of file you are using IDoc and instead of rfc you are using HTTP,
http://wiki.sdn.sap.com/wiki/display/XI/FILETORFCTOFILEwithBPM
regards,
ganesh.

Split message using BPM

Hi Experts
I am getting the request through HTTP which i want to split using BPM and send each splitted message to synchronous step and get the response for each splitted message
I have gone through the following blog
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
I am able to split the message into multiple messages but unable to send each splitted message to synchronous step and get the response.
I am getting " NO Receiver Found" error.
How to send each splitted message to synchronous step and get the response.
Please suggest.
Regards
Sowmya

Hi Sowmya,
I referred to the same blog and the scenario was a success. Please note that in this scenario
"Receiver Determination plays a key role.
Three Receiver Determinations are required. One for the Sender to BPM and two others for BPM to the corresponding output files.
In the Interface Determination for the two Receivers, specify the corresponding Interfaces."
You are just a few steps from success.
Rgds
joel

About File To File using BPM

Hi,
Can any body send the file to file scenario using BPM and also some other typical scenario's on BPM with screenshots.
Thanks in advance .
Regards,
Prem.S

hi
these r some useful blogs for bpm scenarios.
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
FILE TO FILE SCENARIO USING BPM
Interface mappin in File to File using BPM
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Regards
rajesh

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

Collect Operation using BPM and

Similar Messages

Maybe you are looking for