BPM - BPE_ADAPTER : Unknown message Type

Hello Experts,
I am developing a simple BPM scenario with just one receive and one send step. I have configured bothl the BPM steps along with the container elements and verified the objects in IR and ID. In SXI_CACHE the status of teh Integartion Process is '0' which is the correct. I tried reactivationg and redeploying the process several times too, yet message in PI faile with the below error description:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody advice please?
Thanks in advance,
Elizabeth.

In SXI_CACHE the status of teh Integartion Process is '0' which is the correct. I tried reactivationg and redeploying the
process several times too, yet message in PI faile with the below error description:
In that case, delete the ID part for this scenario and redo the objects....from importing the IP into ID.
If still not working then the BPM itself has to be recreated.
If all the messages are properly configured in the BPM and still it is giving the error then it is a CACHE issue.
I hope the BPM is just for practice purpose and not related to any project...as the design does not require to have a BPM
Regards,
Abhishek.

Similar Messages

Unknown message type 'Event/SkypeVideoMessage' & Bolding text Issues

Let me start off by saying how great Skype web is- it's much faster and easier to load in the browser. I have noticed two big issues and that is I cannot watch or receive video messages, and when someone bolds a message in Skype for Desktop it doesn't show up quite right.. Video messages come out with this error message: "Unknown message type 'Event/SkypeVideoMessage" As for the bolding issue, basic HTML, just coming out weird... probably a simple fix.

Hi and welcome to the Skype Community,
Thanks for your interest in Skyp for Web and great to hear it's a useful extension for your everyday Skype use.
Indeed the video message conversation event is currently not supported. Also rich text formatting of text is currently not rendering. Support for these features will arrive via the regular updates to Skype for Web in the future.

RealVNC gives unknown message type 167

I'm trying to use the RealVNC viewer from a Windows machine to talk to a Mac running OS X 10.4.3 and Apple Remote Desktop. It almost works, and in fact one time it did work, but on every subsequent attempt, I get "unknown message type 167." The message comes up after I give the VNC password, and while the screen is initially drawing. Every other VNC viewer I've tried also fails to connect.

Hey man! Here is a list of the mappings between Java and Flex classes in blazeds:
http://livedocs.adobe.com/blazeds/1/blazeds_devguide/help.html?content=serialize_data_3.ht ml
And here is a post in another forum, with a guy with your same problem:
http://www.experts-exchange.com/Web_Development/Web_Languages-Standards/Flex/Q_26185302.ht ml
I would use Object in Flex, and map it to a Map in Java.

Hi i m doing a normal bpm following walk trhough bpm error:no message type

hi
i have followed walk through bpm but when i cant receive the message at the other end after vanishing in the source directory
i get the erroe no message typr found (BPE_ADAPTER)
when i went thru some of the blogs i came to know that i had to check sxi_cache
and if the return code is zero
but i dont find the integration process there to double click on it activate it

>> only find business process in my sxi)cache but not integration processes
Both are the same. I am using PI 7.0 and I find Integration process and not business process. Are you using XI 3,0?
>>how to check if all the cache notifications are green in ir and id
In IR and ID in th menu bar
Environment --> Cache notifications
Regards,
Jai Shankar

How to reimport a changed Interface / Message Type to NW BPM

Hi,
I m developing a NW BPM process (NWDS SP 09) to be used with SAP PO 7.31.
The process is using 15 different imported Interfaces, all of them depending on an External Definition, which unfortunately need to be changed. In PI so far no pretty easy, adapting some mappings, no problem.
But how can i update the process?
Just importing an existing Interface again leads to error message:
Could not import WSDL document:
Could not import WSDL document:
Cannot change XsdSimpleTypeDefinitionWrapper {http://www.namespaceDef.com}
LocationIdent by importing the document http://www.namespaceDef.com/::src/wsdl/SI_OUT_ASYNC_Interface01.wsdl,
because it is already defined in the document in this project.
Importing into another project might be possible
SI_OUT_ASYNC_Interface01.wsdl
/LocalDevelopment~bpm_product~pr~pm~company.com/src/wsdl
Unknown Document Import Marker
Unknown Document Import Marker
Is it possible. that i have to start from the scratch?
/Udo

Hi Moritz,
did i solve it?
No, not properly. I'm going to handle it...
Reimport of a changed own created Message Type works. Reimport of External Definitions does not work. Not nice - during a project it is very common that someone wants to have the data structure changed. And then you have a little problem. How can you recommend a tool what is not able to handle such simple change requests?
So what i did: I created a kind of a "neutral" message type, only used in BPM. I guessed which fields might become important in the future inside BPM for conditions and added 3 "flexible" fields. Plus one field, where i serialized the whole message (using the CDATA expression). Inside BPM i can react on requirements having the values of my fields accessable, but the message itself is serialized into one field value. If there is a requirement from the project to change the Message Type i just need to adapt my mapping from source to BPM. BPM to target is just deserializing and in a second step doing the normal mapping.
The whole solution is a bit complex and self made, but working. Of course i cant start from the scratch for each change.
/Udo

Error "Unknown Message" in BPM process

Hi, I'm experiencing the wonderful "Unknown Message" error that has been very discussed here. I am creating an IDoc to JBDC business process who bundles several IDocs to be sent as a query to JDBC.
When I try to run the process, it doesn't even starts it, because of this error.
I checked the XML and I think that the issue is at the receiver determination or at the interface determination, because the tag receiver looks like this:
- <SAP:Sender>
<SAP:Service>System1</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">FIDCC2.FIDCCP02.ZFIDCCP02</SAP:Interface>
</SAP:Sender>
<SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>IntegrationProcess1</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">FIDCC2.FIDCCP02.ZFIDCCP02</SAP:Interface>
<SAP:Mapping notRequired="Y" />
</SAP:Receiver>
And, from what I said above, the IDoc can't be both sender and receiver. For me, it doesn't make sense. In the receiver it should have been the inbound abstract interface,right?
What I tried and doesn't work:
1) Reactivating the integration process from SXI_CACHE
2) Reimporting the process to the integration directory
3) Deleting and then remaking all the directory objects, like receiver det, interface det and receiver agreement.
What Integration Directory objects I have
1) communication channels
2) business scenario
3) imported integration process
4) receiver determination from ERP to the integration process, including an interface determination from IDoc to abstract interface
5) receiver determination from integration process, including an interface det from abstract interface to JDBC message interface
6) receiver agreement from integration process to JDBC business system, having checked on header mapping the sender service as the integration process.
Can you please help me in any way?
Please don't post links that contain solutions that I already tried, I think I've seen today at least 20 links on this issue and none helped.
If this is not sufficient, I can post the whole return XML on my next reply.
Thanks in advance,
George
Edited by: George Ardeleanu on Jan 26, 2009 1:57 PM

I've checked the trace and the main error message seems to be:
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service IP_CreditControl_Bundle</Trace>
How could this be? Because I've set the receiver & interface determination in the integration directory and they're fine.

Using Fault Message Type in BPM

Hi,
In my BPM Scenario, I am using a synchronous send step in which I am using a fault message type.For giving the container for the fault message in the Properties area of the send step, I want to define a container corresponding to the Fault message Type I have already defined.How can I achieve this since it is not possible by defining an Abstract Interface? Can someone please explain how to do this?
Thanks and Regards,
Soumya.

Hi Soumya,
Here are the links for two threads. one has discussed fault mssage type in bpm and the other the general application of a fault message type.
thread1:- Alert monitoring and fault message types
thread2:- fault message in BPM process
Regards,
Sushumna

JMS sender adapter : message type null is unknown, payload cannot be read

Hello,
We are building a scenario Weblogic -> PI through a JMS adapter, but we are getting the following error in the adapter :
2009-09-29 12:09:58     Information     New JMS message with JMS message ID ID:P<450046.1254218997063.0> received. The XI message ID for this message is e705a65f-3cf6-472a-3675-b04e9862ce45.
2009-09-29 12:09:58     Warning     JMS message ID:P<450046.1254218997063.0>: message type null is unknown, payload cannot be read and will be empty!
2009-09-29 12:09:58     Warning     JMS message ID:P<450046.1254218997063.0>: Payload empty or cannot be read.
2009-09-29 12:09:58     Information     JMS Message was converted to XI message succesfully.
Despite the fact that the message is not readable, PI creates a message anyway but the payload is empty. It is the same issue as described in this thread :
How to read Java Object message from JMS Queue using JMS Adapter .
But there have been no answer there.
We have read many notes but none are relevant, any ideas ????
Many thanks,
GL

Hallo,
Have you seen this note:
[Note 837501 - J2EE JMSAdapter: Empty payloads, unknown JMS message types|https://service.sap.com/sap/support/notes/837501]?
Seems it can be either message
a) does not contain any payload and/or
or
b) is not of type TextMessage or BytesMessage
/Jakub

When I start up FCPX 10.0.1, I get the following message "Failed to save. Unknown store type, format, or version."

When I start up FCPX 10.0.1, I get the following message "Failed to save. Unknown store type, format, or version."

Thanks, Andy. I checked, and it is formatted "Mac OS Extended (Journaled)".
Michael

"Message type LIP805 is unknown

hi friends,
i am facing problem with "Message type LIP805 is unknown".
i am saving the MC61 create planing Hierarchy. it is giving the message document created in status bar.
but the message "operation was terminated" getting to inbox.
appricate << removed >> solution.
YSR.
Edited by: Rob Burbank on Nov 13, 2009 1:49 PM

hi goutham,
while creating and saving it is not shwoing any error message.
but while coming out from the screen it is showing "update was terminated ".
ysr.

Message type 1 unknown error occuring when clicked on IP workbook button

Hi,
I am working on authorization.
When i click on the save button in an IP workbook button, it throws the message "Message type 1 unknown" saying
that an error occured during communication with bw server, and its gets disconnected.
I have included authorization objects for the planning sequences, planning functions, process chains, also included tcodes for ADP ie rsanwb and tcodes
for ABAP programs. Still we are facing with the same problem.
Please suggest me the solution ASAP and points are awarded.
Thanks.

Hi Suresh,
I guess you have posted your question in the wrong forum.
This forum is exclusively for MDM related queries.Yours looks like a BW or ABAP related question.
Kindly repost your question under the respective forum to get immediate assistance.
Hope It Helps
Thanks & Regards
Simona Pinto

Message type " " is unknown

Hi Masters
When i try to cancel the subcontracting challan in T code J1IF13, it throws a run time error "Message type " " is unknown" .We discussed with the ABAPer regarding this error.He told that we have to maintain the message type in configuration. Where to maintain the message type for subcontracting challan?
Regards
Mohanraj.C

Use
The subcontracting attributes help determine conditions for a combination of an excise group, a transaction type, and a subtransaction type.
The conditions such as the number of excise items per subcontracting challan, if the nonexciseable materials have to be filtered or not when the subcontracting challan is created, the movement type groups for issues and receipts and the hierarchy of determining the excise base value are mentioned here.
Requirements
Before you continue with this activity, work through the following activities:
Materials Management -> Inventory Management and Physical Inventory -> Goods Issue / Transfer Postings -> Define Screen Layout.
For the movement type 541, maintain the field Purchase Order as an optional entry or as a required entry.
Materials Management -> Inventory Management and Physical Inventory -> Output Determination -> Maintain Output Types.
Maintain the output type. On the Default Values tab, maintain the dispatch time and the transmission medium. Maintain the print parameter on the Print tab. This output type has to be maintained in this activity here.
Materials Management -> Inventory Management and Physical Inventory -> Output Determination -> Assign Forms and Programs.
Maintain the Program, FORM routine, and the form for the output type.
Materials Management -> Inventory Management and Physical Inventory -> Output Determination -> Printer Determination -> Printer Determination by Plant / Storage Location.
Enter the output device that you use.

HCM Processes & Forms - Message Type is unknown

Hi,
I have created an HCM process using HCM P&F framework. I can test the process from the ""Test Process" application on the ECC and it works fine. When I launch the process from the portal, I can see the adobe form correctly, the "Check and Send" also goes through fine, but when I click on send I get this error:
Error when processing your request
What has happened?
The URL http://xxxxxxxxxx:8000/sap/bc/webdynpro/sap/ASR_PROCESS_EXECUTE// was not called due to an error.
Note
The following error text was processed in the system SE1 : Message type is unknown.
The error occurred on the application server xxxxxxxx_SE1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_POBJ_CASE~CREATE_CASE of program CL_POBJ_CASE==================CP
Method: CREATE_LEVEL_DB of program CL_POBJ_LEVEL=================CP
Method: FLUSH_LINKED_LEVEL of program CL_POBJ_LEVEL=================CP
Method: FLUSH_COMMON of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL1================CP
Method: IF_POBJ_PROCESS_OBJECT~FLUSH of program CL_POBJ_PROCESS_OBJECT========CP
Method: SAVE of program CL_HRASR00_PROCESS_RUNTIME====CP
Has anyone else encountered this issue?
Thanks & regards,
Manish

Hi,
I have created an HCM process using HCM P&F framework. I can test the process from the ""Test Process" application on the ECC and it works fine. When I launch the process from the portal, I can see the adobe form correctly, the "Check and Send" also goes through fine, but when I click on send I get this error:
Error when processing your request
What has happened?
The URL http://xxxxxxxxxx:8000/sap/bc/webdynpro/sap/ASR_PROCESS_EXECUTE// was not called due to an error.
Note
The following error text was processed in the system SE1 : Message type is unknown.
The error occurred on the application server xxxxxxxx_SE1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_POBJ_CASE~CREATE_CASE of program CL_POBJ_CASE==================CP
Method: CREATE_LEVEL_DB of program CL_POBJ_LEVEL=================CP
Method: FLUSH_LINKED_LEVEL of program CL_POBJ_LEVEL=================CP
Method: FLUSH_COMMON of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL=================CP
Method: IF_POBJ_LEVEL_TRANS_HANDLING~FLUSH of program CL_POBJ_LEVEL1================CP
Method: IF_POBJ_PROCESS_OBJECT~FLUSH of program CL_POBJ_PROCESS_OBJECT========CP
Method: SAVE of program CL_HRASR00_PROCESS_RUNTIME====CP
Has anyone else encountered this issue?
Thanks & regards,
Manish

Get message "Unknown AP type. Using Controller Version!!!!

Hi Wireless Gurus,
I have installed a vWLC, software version 8.0.110.0
and these APs are joined to vWLC: AIR-CAP1702I-E-K9
nevertheless we get this message in controller log.
*spamApTask6: Feb 23 14:27:29.686: a0:ec:f9:9f:9f:60 ApModel: AIR-CAP1702I-E-K9
*spamApTask6: Feb 23 14:27:29.686: Unknown AP type. Using Controller Version!!!
*spamApTask6: Feb 23 14:27:29.686: a0:ec:f9:9f:9f:60 ApModel: AIR-CAP1702I-E-K9
*spamApTask6: Feb 23 14:27:29.686: Unknown AP type. Using Controller Version!!!
*spamApTask4: Feb 23 14:28:17.076: a0:ec:f9:65:6d:b0 ApModel: AIR-CAP1702I-E-K9
*spamApTask4: Feb 23 14:28:17.076: Unknown AP type. Using Controller Version!!!
*spamApTask4: Feb 23 14:28:17.076: a0:ec:f9:65:6d:b0 ApModel: AIR-CAP1702I-E-K9
*spamApTask4: Feb 23 14:28:17.076: Unknown AP type. Using Controller Version!!!
*spamApTask4: Feb 23 14:28:17.077: a0:ec:f9:65:6d:b0 ApModel: AIR-CAP1702I-E-K9
*spamApTask4: Feb 23 14:28:17.077: Unknown AP type. Using Controller Version!!!
*spamApTask4: Feb 23 14:28:17.077: a0:ec:f9:65:6d:b0 ApModel: AIR-CAP1702I-E-K9
*spamApTask4: Feb 23 14:28:17.077: Unknown AP type. Using Controller Version!!!
*spamApTask0: Feb 23 14:28:17.729: a0:ec:f9:e1:1f:40 ApModel: AIR-CAP1702I-E-K9
*spamApTask0: Feb 23 14:28:17.729: Unknown AP type. Using Controller Version!!!
*spamApTask0: Feb 23 14:28:17.730: a0:ec:f9:e1:1f:40 ApModel: AIR-CAP1702I-E-K9
*spamApTask0: Feb 23 14:28:17.730: Unknown AP type. Using Controller Version!!!
*spamApTask0: Feb 23 14:28:17.730: a0:ec:f9:e1:1f:40 ApModel: AIR-CAP1702I-E-K9
Does anybody know, why?
thanks
Martin

You can refer the BUG CSCun22797
Do not confuse this error message as being the root cause in case you are having AP Join issues. This is not the problem for your AP join issue. Rather just a cosmetic mis-leading error message. This message will always appear until the WLC code is fixed. You will need to continue troubleshooting, so do not pause a lot on this error message.

SolMan configuration - Message type "e" is unknown

Hi all,
every time i select the step 6.6 (Connect Diagnostics Agents to Solution Manager) of the System Preparation in SolMan 7.1 SP11 i receive the following message (and related dump in ST22).
Message type "e" is unknown.
Same thing happens in two different Solution Manager (same version and SPS).
Looking for SAP Notes without help.
Any suggestions?
Regards.

Hello guys,
We have a similar issue.
Here is why we got to this error. When i setup the SLD in step 6.1 i used another system, and the Solution Manager was non existent in that SLD/LMDB.
I now configured a local SLD in 6.1 and created a local LMDB.
I am now running the synchronization again ( which as you know takes a while ).
Probably the easiest way would have been just to define the system in the first LMDB, but in our case it's a development system and i wanted to try this also.
I will let you know after the sync is finished.
Catalin

BPM - BPE_ADAPTER : Unknown message Type

Similar Messages

Maybe you are looking for